MattCampbellST commented on issue #93:
URL: https://github.com/apache/mynewt-mcumgr/issues/93#issuecomment-1001576410
Sure, here is the btmon trace. I ran this on my internal BT device (note:
this is passed through VMware). I don't have the external dongle handy right
now to run on that. Trace file is attached.
This is the command I ran:
```
mcampbell@ubuntu ~/g/bin [1]> hciconfig hci0
hci0: Type: Primary Bus: USB
BD Address: AC:74:B1:85:B6:EF ACL MTU: 8192:128 SCO MTU: 64:128
UP RUNNING
RX bytes:5266 acl:0 sco:0 events:255 errors:0
TX bytes:4454 acl:0 sco:0 commands:307 errors:0
mcampbell@ubuntu ~/g/bin> sudo ./mcumgr --conntype ble --connstring
ctlr_name=hci0,peer_name='Zephyr' echo asdf
Error: can't scan: Unknown HCI Command
mcampbell@ubuntu ~/g/bin [1]>
```
[mcumgr.trace.zip](https://github.com/apache/mynewt-mcumgr/files/7780397/mcumgr.trace.zip)
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: [email protected]
For queries about this service, please contact Infrastructure at:
[email protected]
