MattCampbellST edited a comment on issue #93:
URL: https://github.com/apache/mynewt-mcumgr/issues/93#issuecomment-1001576410
Sure, here is the btmon trace. I ran this on my internal BT device (note:
this is passed through VMware). I don't have the external dongle handy right
now to run on that. Trace file is attached.
This is the command I ran:
```
mcampbell@ubuntu ~/g/bin [1]> hciconfig -a
hci0: Type: Primary Bus: USB
BD Address: AC:74:B1:85:B6:EF ACL MTU: 8192:128 SCO MTU: 64:128
UP RUNNING
RX bytes:12810 acl:0 sco:0 events:585 errors:0
TX bytes:9398 acl:0 sco:0 commands:715 errors:0
Features: 0xff 0xff 0x8f 0xfe 0x83 0xe1 0x08 0x80
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'ubuntu'
Class: 0x6c0000
Service Classes: Rendering, Capturing, Audio, Telephony
Device Class: Miscellaneous,
HCI Version: 2.1 (0x4) Revision: 0x100
LMP Version: 2.1 (0x4) Subversion: 0x100
Manufacturer: not assigned (6502)
mcampbell@ubuntu ~/g/bin> sudo ./mcumgr --conntype ble --connstring
ctlr_name=hci0,peer_name='Zephyr' echo asdf
Error: can't scan: Unknown HCI Command
mcampbell@ubuntu ~/g/bin [1]>
```
[mcumgr.trace.zip](https://github.com/apache/mynewt-mcumgr/files/7780397/mcumgr.trace.zip)
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: [email protected]
For queries about this service, please contact Infrastructure at:
[email protected]
