[
https://issues.apache.org/jira/browse/NETBEANS-2617?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel
]
Eirik Bakke updated NETBEANS-2617:
----------------------------------
Description:
Once NETBEANS-2604 is done, we should start replacing commonly seen NetBeans
icons with SVG versions, for improved appearance on Retina/HiDPI displays.
h2. UPDATE:
[Here|https://docs.google.com/spreadsheets/d/1U_pj-I3hk9Wj_7lvHcUDsZfFfBSyCkSGqBuv0qt_qXw/edit?usp=sharing]
is a Google Sheet where we can track progress of contributions and
prioritization of icons.
With some practice, it takes on average 30 minutes to create an SVG version of
a typical icon in Adobe Illustrator. See the attached illustration and
Illustrator template. The Illustrator template includes a few icons which have
already been converted.
In NETBEANS-2605, a prioritized list of icons to convert was produced (now
migrated to the Google Sheet above). By redrawing the most commonly seen icons
first, we can get the greatest "bang for the buck" in terms of improving
NetBeans' appearance on HiDPI displays. Note that in cases where an icon file
has been copied around to various places in the NetBeans codebase, the
spreadsheet includes only one location, picked arbitrarily. Once we are ready
to install the icons into the repo, Eirik will redo the duplicate detection and
ensure the SVGs end up in all relevant locations.
See also the overview page for HiDPI improvements on
https://cwiki.apache.org/confluence/display/NETBEANS/HiDPI+%28Retina%29+improvements
.
h2. Proposed Style Guide for Vectorized Icons
* Vector icons should be drawn in Adobe Illustrator. Each icon should be one
named artboard, sized to the correct size in pixels. See the attached
Illustrator template. (Adobe Illustrator comes with a free 7-day trial, after
which it's $35/month. If cost is a problem but you want to contribute your time
to draw icons, ask Eirik...)
* If you prefer to use Inkscape instead, and want to contribute a few dozen
icons, that's fine; just make sure to follow the same consistent style as the
other icons. If using Inkscape, perhaps pick another group of icons than the
ones that are currently being drawn in Illustrator. It's best to draw all
similar-looking icons in the same tool.
* For each icon to be vectorized, place the old bitmap version of the icon in
the "Old Bitmap Icons" layer in Illustrator. You can then draw the vectorized
version on top.
* Since most of the existing NetBeans icons follow a quite consistent visual
style, and to simplify the job of creating new icons, it is best to keep the
shape of the new vectorized icons the same as in the old bitmap icons. For
instance, a rectangle of size 5x4px in the bitmap icon should probably become a
rectangle of 5x4px in the vector version.
* Keep the same general colors in vectorized icons as in the corresponding old
bitmap icons. (The color scheme is not too hard to change later, but we should
do this only once most of the IDE icons have been vectorized.)
* If the old bitmap icon is complex, it is fine to simplify it a bit when
drawing vectorized versions.
* Omit gradients, bevels, and unnecessary drop shadows. They take more time to
draw, and with "flat design", they are now out of fashion in any case.
* Use a stroke width of 1px around the main shapes in the icon, like in the
existing bitmap icons. The new icons should look consistent with the existing
bitmap icons, especially since we may see bitmap icons and vector icons
side-by-side for a long time. Within shapes, 0.5px strokes can be used for
finer details. (0.5px strokes become 1 device pixel on Retina screens, which
have a 2x scaling.)
* The 1px strokes that outline the icon's shapes should typically be 33%
transparent black on top of the shape's background color, or of similar
darkness. See the examples in the attached "style example.png" file.
* When the same shape occurs in different icons but at different sizes (e.g.
the small magnifying glass in find_selection.png vs. the large magnifying glass
in zoom_in.png), strokes and borders should still remain at the same thickness
(1px for external borders and 0.5px for internal strokes).
* Horizontal and vertical strokes must be aligned to the pixel grid.
* While it may sometimes be necessary to "outline" strokes for the purposes of
applying boolean operations (e.g. subtracting another shape from the stroke
only), strokes should be left as strokes whenever possible, as this leads to
smaller SVG files, and makes shapes within the icon easier to modify.
* For toolbar icons, which exist in both 16x16 and 24x24 sizes, base the vector
version on the smaller 16x16 one, which is sometimes simpler. (This is already
done in the prioritized icon list above.)
If you wish to contribute to this effort, comment here; Eirik will coordinate
to make sure multiple people are not working on the same icons.
was:
Once NETBEANS-2604 is done, we should start replacing commonly seen NetBeans
icons with SVG versions, for improved appearance on Retina/HiDPI displays.
h2. UPDATE:
[Here|https://docs.google.com/spreadsheets/d/1U_pj-I3hk9Wj_7lvHcUDsZfFfBSyCkSGqBuv0qt_qXw/edit?usp=sharing]
is a Google Sheet where we can track progress of contributions and
prioritization of icons.
With some practice, it takes on average 30 minutes to create an SVG version of
a typical icon in Adobe Illustrator. See the attached illustration and
Illustrator template. The Illustrator template includes a few icons which have
already been converted.
In NETBEANS-2605, a prioritized list of icons to convert was produced (now
migrated to the Google Sheet above). By redrawing the most commonly seen icons
first, we can get the greatest "bang for the buck" in terms of improving
NetBeans' appearance on HiDPI displays. Note that in cases where an icon file
has been copied around to various places in the NetBeans codebase, the
spreadsheet includes only one location, picked arbitrarily. Once we are ready
to install the icons into the repo, Eirik will redo the duplicate detection and
ensure the SVGs end up in all relevant locations.
See also the overview page for HiDPI improvements on
https://cwiki.apache.org/confluence/display/NETBEANS/HiDPI+%28Retina%29+improvements
.
h2. Proposed Style Guide for Vectorized Icons
* Vector icons should be drawn in Adobe Illustrator. Each icon should be one
named artboard, sized to the correct size in pixels. See the attached
Illustrator template. (Adobe Illustrator comes with a free 7-day trial, after
which it's $35/month. If cost is a problem but you want to contribute your time
to draw icons, ask Eirik...)
* If you prefer to use Inkscape instead, and want to contribute a few dozen
icons, that's fine; just make sure to follow the same consistent style as the
other icons. If using Inkscape, perhaps pick another group of icons than the
ones that are currently being drawn in Illustrator. It's best to draw all
similar-looking icons in the same tool.
* For each icon to be vectorized, place the old bitmap version of the icon in
the "Old Bitmap Icons" layer in Illustrator. You can then draw the vectorized
version on top.
* Since most of the existing NetBeans icons follow a quite consistent visual
style, and to simplify the job of creating new icons, it is best to keep the
shape of the new vectorized icons the same as in the old bitmap icons. For
instance, a rectangle of size 5x4px in the bitmap icon should probably become a
rectangle of 5x4px in the vector version.
* Keep the same general colors in vectorized icons as in the corresponding old
bitmap icons. (The color scheme is not too hard to change later, but we should
do this only once most of the IDE icons have been vectorized.)
* If the old bitmap icon is complex, it is fine to simplify it a bit when
drawing vectorized versions.
* Omit gradients, bevels, and unnecessary drop shadows. They take more time to
draw, and with "flat design", they are now out of fashion in any case.
* Use a stroke width of 1px around the main shapes in the icon, like in the
existing bitmap icons. The new icons should look consistent with the existing
bitmap icons, especially since we may see bitmap icons and vector icons
side-by-side for a long time. Within shapes, 0.5px strokes can be used for
finer details. (0.5px strokes become 1 device pixel on Retina screens, which
have a 2x scaling.)
* The 1px strokes that outline the icon's shapes should typically be 33%
transparent black on top of the shape's background color, or of similar
darkness. See the examples in the attached "style example.png" file.
* Horizontal and vertical strokes must be aligned to the pixel grid.
* While it may sometimes be necessary to "outline" strokes for the purposes of
applying boolean operations (e.g. subtracting another shape from the stroke
only), strokes should be left as strokes whenever possible, as this leads to
smaller SVG files, and makes shapes within the icon easier to modify.
* For toolbar icons, which exist in both 16x16 and 24x24 sizes, base the vector
version on the smaller 16x16 one, which is sometimes simpler. (This is already
done in the prioritized icon list above.)
If you wish to contribute to this effort, comment here; Eirik will coordinate
to make sure multiple people are not working on the same icons.
> Redraw common icons in SVG
> --------------------------
>
> Key: NETBEANS-2617
> URL: https://issues.apache.org/jira/browse/NETBEANS-2617
> Project: NetBeans
> Issue Type: Improvement
> Components: platform - Other
> Affects Versions: 11.0
> Environment: Windows, Linux, and MacOS
> Reporter: Eirik Bakke
> Priority: Major
> Labels: HiDPI
> Attachments: Icons drawn by Eirik as of 2020-09-18 (this file for
> visual reference only).pdf, ScreenshotExample.png, ide.editor.bookmarks.ai,
> ide.editor.macros.ai, ide.seperator.breadcrumbs.ai,
> netbeans_icons_illustrator_template.ai, style example (dark filter).png,
> style example.png
>
>
> Once NETBEANS-2604 is done, we should start replacing commonly seen NetBeans
> icons with SVG versions, for improved appearance on Retina/HiDPI displays.
> h2. UPDATE:
> [Here|https://docs.google.com/spreadsheets/d/1U_pj-I3hk9Wj_7lvHcUDsZfFfBSyCkSGqBuv0qt_qXw/edit?usp=sharing]
> is a Google Sheet where we can track progress of contributions and
> prioritization of icons.
> With some practice, it takes on average 30 minutes to create an SVG version
> of a typical icon in Adobe Illustrator. See the attached illustration and
> Illustrator template. The Illustrator template includes a few icons which
> have already been converted.
> In NETBEANS-2605, a prioritized list of icons to convert was produced (now
> migrated to the Google Sheet above). By redrawing the most commonly seen
> icons first, we can get the greatest "bang for the buck" in terms of
> improving NetBeans' appearance on HiDPI displays. Note that in cases where an
> icon file has been copied around to various places in the NetBeans codebase,
> the spreadsheet includes only one location, picked arbitrarily. Once we are
> ready to install the icons into the repo, Eirik will redo the duplicate
> detection and ensure the SVGs end up in all relevant locations.
> See also the overview page for HiDPI improvements on
> https://cwiki.apache.org/confluence/display/NETBEANS/HiDPI+%28Retina%29+improvements
> .
> h2. Proposed Style Guide for Vectorized Icons
> * Vector icons should be drawn in Adobe Illustrator. Each icon should be one
> named artboard, sized to the correct size in pixels. See the attached
> Illustrator template. (Adobe Illustrator comes with a free 7-day trial, after
> which it's $35/month. If cost is a problem but you want to contribute your
> time to draw icons, ask Eirik...)
> * If you prefer to use Inkscape instead, and want to contribute a few dozen
> icons, that's fine; just make sure to follow the same consistent style as the
> other icons. If using Inkscape, perhaps pick another group of icons than the
> ones that are currently being drawn in Illustrator. It's best to draw all
> similar-looking icons in the same tool.
> * For each icon to be vectorized, place the old bitmap version of the icon in
> the "Old Bitmap Icons" layer in Illustrator. You can then draw the vectorized
> version on top.
> * Since most of the existing NetBeans icons follow a quite consistent visual
> style, and to simplify the job of creating new icons, it is best to keep the
> shape of the new vectorized icons the same as in the old bitmap icons. For
> instance, a rectangle of size 5x4px in the bitmap icon should probably become
> a rectangle of 5x4px in the vector version.
> * Keep the same general colors in vectorized icons as in the corresponding
> old bitmap icons. (The color scheme is not too hard to change later, but we
> should do this only once most of the IDE icons have been vectorized.)
> * If the old bitmap icon is complex, it is fine to simplify it a bit when
> drawing vectorized versions.
> * Omit gradients, bevels, and unnecessary drop shadows. They take more time
> to draw, and with "flat design", they are now out of fashion in any case.
> * Use a stroke width of 1px around the main shapes in the icon, like in the
> existing bitmap icons. The new icons should look consistent with the existing
> bitmap icons, especially since we may see bitmap icons and vector icons
> side-by-side for a long time. Within shapes, 0.5px strokes can be used for
> finer details. (0.5px strokes become 1 device pixel on Retina screens, which
> have a 2x scaling.)
> * The 1px strokes that outline the icon's shapes should typically be 33%
> transparent black on top of the shape's background color, or of similar
> darkness. See the examples in the attached "style example.png" file.
> * When the same shape occurs in different icons but at different sizes (e.g.
> the small magnifying glass in find_selection.png vs. the large magnifying
> glass in zoom_in.png), strokes and borders should still remain at the same
> thickness (1px for external borders and 0.5px for internal strokes).
> * Horizontal and vertical strokes must be aligned to the pixel grid.
> * While it may sometimes be necessary to "outline" strokes for the purposes
> of applying boolean operations (e.g. subtracting another shape from the
> stroke only), strokes should be left as strokes whenever possible, as this
> leads to smaller SVG files, and makes shapes within the icon easier to modify.
> * For toolbar icons, which exist in both 16x16 and 24x24 sizes, base the
> vector version on the smaller 16x16 one, which is sometimes simpler. (This is
> already done in the prioritized icon list above.)
> If you wish to contribute to this effort, comment here; Eirik will coordinate
> to make sure multiple people are not working on the same icons.
--
This message was sent by Atlassian Jira
(v8.3.4#803005)
---------------------------------------------------------------------
To unsubscribe, e-mail: commits-unsubscr...@netbeans.apache.org
For additional commands, e-mail: commits-h...@netbeans.apache.org
For further information about the NetBeans mailing lists, visit:
https://cwiki.apache.org/confluence/display/NETBEANS/Mailing+lists
