[
https://issues.apache.org/jira/browse/NIFI-1028?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=15266478#comment-15266478
]
ASF GitHub Bot commented on NIFI-1028:
--------------------------------------
Github user olegz commented on a diff in the pull request:
https://github.com/apache/nifi/pull/339#discussion_r61730868
--- Diff: nifi-docs/src/main/asciidoc/nifi-in-depth.adoc ---
@@ -0,0 +1,209 @@
+//
+// Licensed to the Apache Software Foundation (ASF) under one or more
+// contributor license agreements. See the NOTICE file distributed with
+// this work for additional information regarding copyright ownership.
+// The ASF licenses this file to You under the Apache License, Version 2.0
+// (the "License"); you may not use this file except in compliance with
+// the License. You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+Apache NiFi In Depth
+====================
+Apache NiFi Team <[email protected]>
+:homepage: http://nifi.apache.org
+
+Intro
+-----
+This advanced level document is aimed at providing an in-depth look at the
implementation and design decisions of NiFi. It assumes the reader has read
enough of the other documentation to know the basics of NiFi.
+
+FlowFiles are at the heart of NiFi and its flow-based design. A FlowFile
is just a collection of attributes and a pointer to content, which is
associated with one or more provenance events. The attributes are key/value
pairs that act as the metadata for the FlowFile, such as the FlowFile filename.
The content is the actual data or the payload of the file. Provenance is a
record of what’s happened to the FlowFile. Each one of these parts has its own
repository (repo) for storage.
+
+One key aspect of the repositories is immutability. The content in the
Content Repository and data within the FlowFile Repository are immutable. When
a change occurs to the attributes of a FlowFile new copies of the attributes
are created in memory and then persisted on disk. When content is being changed
for a given FlowFile its original content is read, streamed through the
transform, and written to a new stream. Then the FlowFile's content pointer is
updated to the new location on disk. As a result, the default approach for
FlowFile content storage can be said to be an immutable versioned content
store. The benefits of which are many including substantial reduction in
storage space required for the typical complex graphs of processing, natural
replay capability, takes advantage of OS caching, reduces random read/write
performance hits, and is easy to reason over. The previous revisions are kept
according to the archiving properties set in nifi.properties file and outlined
in the NiFi System Administrator’s Guide.
+
+== Repositories
+There are three repositories that are utilized by NiFi. Each exists within
the OS/Host's file system and provides specific functionality. In order to
fully understand FlowFiles and how they are used by the underlying system it's
important to know about these repositories. All three repositories are
directories on local storage that NiFi uses to persist data.
+
+- The FlowFile Repository contains metadata for all the current FlowFiles
in the flow.
+- The Content Repository holds the content for current and past FlowFiles.
+- The Provenance Repository holds the history of FlowFiles.
+
+image::NiFiArchitecture.png["NiFi Architecture Diagram"]
+
+=== FlowFile Repository
+FlowFiles that are actively being processed by the system is held in a
hash map in the JVM memory (more about that in "Deeper View: FlowFiles in
Memory and on Disk"). This makes it very efficient to process them, but
requires a secondary mechanism to provide durability of data across process
restarts due to any number of reasons. Reasons such as power loss, kernel
panics, system upgrades, and maintenance cycles. The FlowFile Repository is a
"Write-Ahead Log" (or data record) of the metadata of each of the FlowFiles
that currently exist in the system. This FlowFile metadata includes all the
attributes associated with the FlowFile, a pointer to the actual content of the
FlowFile (which exists in the Content Repo) and the state of the FlowFile, such
as which Connection/Queue the FlowFile belongs in. This Write-Ahead Log
provides NiFi the resiliency it needs to handle restarts and unexpected system
failures.
+
+The FlowFile Repository acts as NiFi's Write-Ahead Log, so as the
FlowFiles are flowing through the system each change is logged in the FlowFile
Repository before it happens as a transactional unit of work. This allows the
system to know exactly what step the node is on when processing a piece of
data. If the node goes down while processing the data, it can easily resume
from where it left off upon restart (more in-depth in "Effect of System Failure
on Transactions"). The format of the FlowFiles in the log is a series of deltas
(or changes) that happened along the way. NiFi recovers a FlowFile by restoring
a “snapshot” of the FlowFile (created when the Repository is check-pointed) and
then replaying each of these deltas.
+
+A snapshot is automatically taken periodically by the system, which
creates a new snapshot for each FlowFile. The system computes a new base
checkpoint by serializing each FlowFile in the hash map and writing it to disk
with the filename ".partial". As the checkpointing proceeds, the new FlowFile
baselines are written to the ".partial" file. Once the checkpointing is done
the old "snapshot" file is deleted and the ".partial" file is renamed
"snapshot".
+
+The period between system checkpoints is configurable in the
nifi.properties file (documented in the NiFi System Administrator's Guide). The
default is a two-minute interval.
+
+===== Effect of System Failure on Transactions
+NiFi protects against hardware and system failures by keeping a record of
what was happening on each node at that time in their respective FlowFile Repo.
As mentioned above, the FlowFile Repo is NiFi's Write-Ahead Log. When the node
comes back online, it works to restore its state by first checking for the
"snapshot" and ".partial" files. The node either accepts the "snapshot" and
deletes the ".partial" (if it exits), or renames the ".partial" file to
"snapshot" if the "snapshot" file doesn't exist.
+
+If the Node was in the middle of writing content when it went down,
nothing is corrupted, thanks to the Copy On Write (mentioned below) and
Immutability (mentioned above) paradigms. Since FlowFile transactions never
modify the original content (pointed to by the content pointer), the original
is safe. When NiFi goes down, the write claim for the change is orphaned and
then cleaned up by the background garbage collection. This provides a
“rollback” to the last known stable state.
+
+The Node then restores its state from the FlowFile. For a more in-depth,
step-by-step explanation of the process, see this link:
https://cwiki.apache.org/confluence/display/NIFI/NiFi%27s+Write-Ahead+Log+Implementation
+
+This setup, in terms of transactional units of work, allows NiFi to be
very resilient in the face of adversity, ensuring that even if NiFi is suddenly
killed, it can pick back up without any loss of data.
+
+===== Deeper View: FlowFiles in Memory and on Disk
+The term "FlowFile" is a bit of a misnomer. This would lead one to believe
that each FlowFile corresponds to a file on disk, but that is not true. There
are two main locations that the FlowFile attributes exist, the Write-Ahead Log
that is explained above and a hash map in working memory. This hash map has a
reference to all of the FlowFiles actively being used in the Flow. The object
referenced by this map is the same one that is used by processors and held in
connections queues. Since the FlowFile object is held in memory, all which has
to be done for the Processor to get the FlowFile is to ask the ProcessSession
to grab it from the queue.
+
+When a change occurs to the FlowFile, the delta is written out to the
Write-Ahead Log and the object in memory is modified accordingly. This allows
the system to quickly work with FlowFiles while also keeping track of what has
happened and what will happen when the session is committed. This provides a
very robust and durable system.
+
+There is also the notion of "swapping" FlowFiles. This occurs when the
number of FlowFiles in a connection queue exceeds the value set in the
"nifi.queue.swap.threshold" property. The FlowFiles with the lowest priority in
the connection queue are serialized and written to disk in a "swap file" in
batches of 10,000. These FlowFiles are then removed from the hash map mentioned
above and the connection queue is in charge of determining when to swap the
files back into memory. When the FlowFiles are swapped out, the FlowFile repo
is notified and it keeps a list of the swap files. When the system is
checkpointed the snapshot includes a section for swapped out files. When swap
files are swapped back in, the FlowFiles are added back into the hash map. This
swapping technique, much like the swapping performed by most Operating Systems,
allows NiFi to provide very fast access to FlowFiles that are actively being
processed while still allowing many millions of FlowFiles to exist in the Flow
without depleting the system’s memory.
+
+
+=== Content Repository
+The Content Repository is simply a place in local storage where the
content of all FlowFiles exists and it is typically the largest of the three
Repositories. As mentioned in the introductory section, this repository
utilizes the immutability and copy-on-write paradigms to maximize speed and
thread-safety. The core design decision influencing the Content Repo is to hold
the FlowFile's content on disk and only read it into JVM memory when it's
needed. This allows NiFi to handle tiny and massive sized objects without
requiring producer and consumer processors to hold the full objects in memory.
As a result, actions like splitting, aggregating, and transforming very large
objects are quite easy to do without harming memory.
+
+In the same way the JVM Heap has a garbage collection process to reclaim
unreachable objects when space is needed, there exists a dedicated thread in
NiFi to analyze the Content repo for un-used content (more info in the " Deeper
View: Deletion After Checkpointing" section). After a FlowFile's content is
identified as no longer in use it will either be deleted or archived. If
archiving is enabled in nifi.properties then the FlowFile’s content will exist
in the Content Repo either until it is aged off (deleted after a certain amount
of time) or deleted due to the Content Repo taking up too much space. The
conditions for archiving and/or deleting are configured in the nifi.properties
file ("nifi.content.repository.archive.max.retention.period",
"nifi.content.repository.archive.max.usage.percentage") and outlined in the
Admin guide. Refer to the "Data Egress" section for more information on the
deletion of content.
+
+===== Deeper View: Content Claim
+In general, when talking about a FlowFile, the reference to its content
can simply be referred to as a "pointer" to the content. Though, the underlying
implementation of the FlowFile Content reference has multiple layers of
complexity. The Content Repository is made up of a collection of files on disk.
These files are binned into Containers and Sections. A Section is a
subdirectory of a Container. A Container can be thought of as a “root
directory” for the Content Repository. The Content Repository, though, can be
made up of many Containers. This is done so that NiFi can take advantage of
multiple physical partitions in parallel.” NiFi is then capable of reading
from, and writing to, all of these disks in parallel, in order to achieve data
rates of hundreds of Megabytes or even Gigabytes per second of disk throughput
on a single node. "Resource Claims" are Java objects that point to specific
files on disk (this is done by keeping track of the file ID, the section the
file is in, and the container the section is a part of).
+
+To keep track of the FlowFile's contents, the FlowFile has a "Content
Claim" object. This Content Claim has a reference to the Resource Claim that
contains the content, the offset of the content within the file, and the length
of the content. To access the content, the Content Repository drills down using
to the specific file on disk using the Resource Claim's properties and then
seeks to the offset specified by the Resource Claim before streaming content
from the file.
+
+This layer of abstraction (Resource Claim) was done so that there is not a
file on disk for the content of every FlowFile. The concept of immutability is
key to this being possible. Since the content is never changed once it is
written ("copy on write" is used to make changes), there is no fragmentation of
memory or moving data if the content of a FlowFile changes. By utilizing a
single file on disk to hold the content of many FlowFiles, NiFi is able to
provide far better throughput, often approaching the maximum data rates
provided by the disks.
+
+
+=== Provenance Repository
+The Provenance Repository is where the history of each FlowFile is stored.
This history is used to provide the Data Lineage (also known as the Chain of
Custody) of each piece of data. Each time that an event occurs for a FlowFile
(FlowFile is created, forked, cloned, modified, etc.) a new provenance event is
created. This provenance event is a snapshot of the FlowFile as it looked and
fit in the flow that existed at that point in time. When a provenance event is
created, it copies all the FlowFile's attributes and the pointer to the
FlowFile's content and aggregates that with the FlowFile's state (such as its
relationship with other provenance events) to one location in the Provenance
Repo. This snapshot will not change, with the exception of the data being
expired. The Provenance Repository holds all of these provenance events for a
period of time after completion, as specified in the nifi.properties file.
+
+Because all of the FlowFile attributes and the a pointer to the content
are kept in the Provenance Repository, a Dataflow Manager is able to not only
see the lineage, or processing history, of that piece of data, but is also able
to later view the data itself and even replay the data from any point in the
flow. A common use-case for this is when a particular down-stream system claims
to have not received the data. The data lineage can show exactly when the data
was delivered to the downstream system, what the data looked like, the
filename, and the URL that the data was sent to – or can confirm that the data
was indeed never sent. In either case, the Send event can be replayed with the
click of a button (or by accessing the appropriate HTTP API endpoint) in order
to resend the data only to that particular downstream system. Alternatively, if
the data was not handled properly (perhaps some data manipulation should have
occurred first), the flow can be fixed and then the data can be replayed into
the new flow, in order to process the data properly.
+
+Keep in mind, though, that since Provenance is not copying the content in
the Content Repo, and just copying the FlowFile's pointer to the content, the
content could be deleted before the provenance event that references it is
deleted. This would mean that the user would no longer able to see the content
or replay the FlowFile later on. However, users are still able to view the
FlowFile’s lineage and understand what happened to the data. For instance, even
though the data itself will not be accessible, the user is still able to see
the unique identifier of the data, its filename (if applicable), when it was
received, where it was received from, how it was manipulated, where it was
sent, and so on. Additionally, since the FlowFile’s attributes are made
available, a Dataflow Manager is able to understand why the data was processed
in the way that it was, providing a crucial tool for understanding and
debugging the dataflow.
+
+Note: Since provenance events are snapshots of the FlowFile, as it exists
in the current flow, changes to the flow may impact the ability to replay
provenance events later on. For example, if a Connection is deleted from the
flow, the data cannot be replayed from that point in the flow, since there is
now nowhere to enqueue the data for processing.
+
+For a look at the design decisions behind the Provenance Repository check
out this link:
https://cwiki.apache.org/confluence/display/NIFI/Persistent+Provenance+Repository+Design
+
+===== Deeper View: Provenance Log Files
+Each provenance event has two maps, one for the attributes before the
event and one for the updated attribute values. In general, provenance events
don't store the updated values of the attributes as they existed when the event
was emitted but instead, the attribute values when the session is committed.
The events are cached and saved until the session is committed and once the
session is committed the events are emitted with the attributes associated with
the FlowFile when the session is committed. The exception to this rule is the
"SEND" event, in which case the event contains the attributes as they existed
when the event was emitted. This is done because if the attributes themselves
were also sent, it is important to have an accurate account of exactly what
information was sent.
+
+As NiFi is running, there is a rolling group of 16 provenance log files.
As provenance events are emitted they are written to one of the 16 files (there
are multiple files to increase throughput). The log files are periodically
rolled over (the default timeframe is every 30 seconds). This means the newly
created provenance events start writing to a new group of 16 log files and the
original ones are processed for long term storage. First the rolled over logs
are merged into one file. Then the file is optionally compressed (determined by
the "nifi.provenance.repository.compress.on.rollover" property). Lastly the
events are indexed using Lucene and made available for querying. This batched
approach for indexing means provenance events aren't available immediately for
querying but in return this dramatically increases performance because
committing a transaction and indexing are very expensive tasks.
+
+A separate thread handles the deletion of provenance logs. The two
conditions admins can set to control the deletion of provenance logs is the max
amount of disk space it can take up and the max retention duration for the
logs. The thread sorts the repo by the last modified date and deletes the
oldest file when one of the conditions is exceeded.
+
+The Provenance Repo is a Lucene index that is broken into multiple shards.
This is done for multiple reasons. Firstly, Lucene uses a 32-bit integer for
the document identifier so the maximum number of documents supported by Lucene
without sharding is limited. Second, if we know the time range for each shard,
it makes it easy to search with multiple threads. Also, this sharding also
allows for more efficient deletion. NiFi waits until all events in a shard are
scheduled for deletion before deleting the entire shard from disk. This makes
it so we do not have to update the Lucene index when we delete.
+
+
+=== General Repository Notes
+===== Multiple Physical Storage Points
+For the Provenance and Content repos, there is the option to stripe the
information across multiple physical partitions. An admin would do this if they
wanted to federate reads and writes across multiple disks. The repo (Content or
Provenance) is still one logical store but writes will be striped across
multiple volumes/partitions automatically by the system. The directories are
specified in the nifi.properties file.
+
+
+===== Best Practice
+It is considered a best practice to analyze the contents of a FlowFile as
few times as possible and instead extract key information from the contents
into the attributes of the FlowFile; then read/write information from the
FlowFile attributes. One example of this is the ExtractText processor, which
extracts text from the FlowFile Content and puts it as an attribute so other
processors can make use of it. This provides far better performance than
continually processing the entire content of the FlowFile, as the attributes
are kept in-memory and updating the FlowFile repository is much faster than
updating the Content repository, given the amount of data stored in each.
+
+
+== Life of a FlowFile
+To better understand how the repos interact with one another, the
underlying functionality of NiFi, and the life of a FlowFile; this next section
will include examples of a FlowFile at different points in a real flow. The
flow is a template called "WebCrawler.xml" and is available here:
https://cwiki.apache.org/confluence/display/NIFI/Example+Dataflow+Templates.
+
+At a high level, this template reaches out to a seed URL configured in the
GetHTTP processor then analyzes the response using the RouteText processor to
find instances of a keyword (in this case "nifi"), and potential URLs to hit.
Then InvokeHTTP executes a HTTP Get request using the URLs found in the
original seed web page. The response is routed based on the status code
attribute and only 200-202 status codes are routed back to the original
RouteText processor for analysis.
+
+The flow also detects duplicate URLs and prevents processing them again,
emails the user when keywords are found, logs all successful HTTP requests, and
bundles up the successful requests to be compressed and archived on disk.
+
+Note: To use this flow you need to configure a couple options. First a
DistributedMapCacheServer controller service must be added with default
properties. At the time of writing there was no way to explicitly add the
controller service to the template and since no processors reference the
service it is not included. Also to get emails, the PutEmail processor must be
configured with your email credentials. Finally to use HTTPS the
StandardSSLContextService must be configured with proper key and trust stores.
Remember that the truststore must be configured with the proper Certificate
Authorities in order to work for websites. The command below is an example of
using the "keytool" command to add the default Java 1.8.0_60 CAs to a
truststore called myTrustStore.
+
+keytool -importkeystore -srckeystore
/Library/Java/JavaVirtualMachines/jdk1.8.0_60.jdk/Contents/Home/jre/lib/security/cacerts
-destkeystore myTrustStore
+
+
+===== WebCrawler Template:
+Note that it is not uncommon for bulletins with messages such as
"Connection timed out" to appear on the InvokeHttp processor due to the random
nature of web crawling.
+
+
+image::WebCrawler.png["Web Crawler Flow"]
+
+=== Data Ingress
+A FlowFile is created in the system when a producer processor invokes
"ProcessSession.create()" followed by an appropriate call to the
ProvenanceReporter. The "ProcessSession.create()" call creates an empty
FlowFile with a few core attributes (filename, path and uuid for the standard
process session) but without any content or lineage to parents (the create
method is overloaded to allow parameters for parent FlowFiles). The producer
processor then adds the content and attributes to the FlowFile.
+
+ProvenanceReporter is used to emit the Provenance Events for the FlowFile.
If the file is created by NiFi from data not received by an external entity
then a "CREATE" event should be emitted. If instead the data was created from
data received from an external source then a "RECEIVE" event should be emitted.
The Provenance Events are made using "ProvenanceReporter.create()" and
"ProvenanceReporter.receive()" respectively.
+
+In our WebCrawler flow, the GetHTTP processor creates the initial FlowFile
using "ProcessSession.create()" and records the receipt of data using
"ProvenanceReporter.receive()". This method call also provides the URL from
which the data was received, how long it took the transfer the data, and any
FlowFile attributes that were added to the FlowFile. HTTP Headers, for
instance, can be added as FlowFile attributes.
+
+image::DataIngress.png["Data Ingress"]
+
+=== Pass by Reference
+An important aspect of flow-based programming is the idea of
resource-constrained relationships between the black boxes. In NiFi these are
queues and processors respectively.
--- End diff --
The reason why I was thinking about mentioning it here is because "Pass by
Reference" and "Claim Check" is essentially the same thing and if one feels
more comfortable to use one terminology over the other then I though we should
support it. And then you can link to the "Deeper View: Content Claim" for more
details. Anyway, jus a thought.
> Document FlowFiles and the repos in depth
> -----------------------------------------
>
> Key: NIFI-1028
> URL: https://issues.apache.org/jira/browse/NIFI-1028
> Project: Apache NiFi
> Issue Type: Improvement
> Components: Documentation & Website
> Reporter: Joseph Percivall
> Assignee: Joseph Percivall
>
> Currently the Documentation gives an overview of the FlowFiles and repos but
> users need a good in depth look into what a FlowFile is and how it changes
> when it goes through a flow, and there needs to be in depth documentation on
> the three repositories.
--
This message was sent by Atlassian JIRA
(v6.3.4#6332)
