This is an automated email from the ASF dual-hosted git repository.
acassis pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/nuttx.git
The following commit(s) were added to refs/heads/master by this push:
new 4847587cf2 Documentation: update broken links
4847587cf2 is described below
commit 4847587cf2464461b26bb4158a2cc77792cc83ef
Author: Emmanuel Ferdman <emmanuelferd...@gmail.com>
AuthorDate: Wed Apr 10 14:51:33 2024 +0300
Documentation: update broken links
---
Documentation/platforms/arm/a1x/index.rst | 2 +-
Documentation/platforms/arm/am335x/index.rst | 2 +-
Documentation/platforms/arm/efm32/index.rst | 4 ++--
Documentation/platforms/arm/imx6/index.rst | 4 ++--
Documentation/platforms/arm/kinetis/index.rst | 6 +++---
Documentation/platforms/arm/lc823450/index.rst | 2 +-
Documentation/platforms/arm/lpc17xx/index.rst | 12 ++++++------
Documentation/platforms/arm/lpc40xx/boards/lx_cpu/README.txt | 2 +-
Documentation/platforms/arm/lpc43xx/index.rst | 8 ++++----
Documentation/platforms/arm/lpc54xx/index.rst | 2 +-
Documentation/platforms/arm/nuc1xx/index.rst | 2 +-
Documentation/platforms/arm/sam34/index.rst | 4 ++--
.../platforms/arm/sama5/boards/sama5d3x-ek/README.txt | 4 ++--
Documentation/platforms/arm/sama5/index.rst | 6 +++---
.../platforms/arm/samd2l2/boards/samd21-xplained/README.txt | 2 +-
.../platforms/arm/samv7/boards/same70-xplained/README.txt | 2 +-
.../platforms/arm/tiva/boards/tm4c123g-launchpad/README.txt | 2 +-
.../platforms/arm/tiva/boards/tm4c129e-launchpad/README.txt | 4 ++--
Documentation/platforms/arm/tiva/index.rst | 10 +++++-----
Documentation/platforms/avr/at32uc3/index.rst | 2 +-
Documentation/platforms/mips/pic32mz/index.rst | 2 +-
.../platforms/renesas/m16c/boards/skp16c26/README.txt | 2 +-
Documentation/platforms/renesas/m16c/index.rst | 2 +-
Documentation/platforms/x86/qemu/index.rst | 2 +-
Documentation/platforms/z16/z16f/index.rst | 2 +-
Documentation/platforms/z80/z180/index.rst | 2 +-
Documentation/platforms/z80/z8/index.rst | 4 ++--
Documentation/platforms/z80/z80/index.rst | 2 +-
boards/arm/lpc17xx_40xx/lx_cpu/tools/oocd.sh | 2 +-
boards/arm/lpc214x/zp214xpa/tools/oocd.sh | 2 +-
boards/arm/lpc31xx/olimex-lpc-h3131/tools/oocd.sh | 2 +-
boards/arm/tiva/dk-tm4c129x/tools/oocd.sh | 2 +-
boards/arm/tiva/lm3s6965-ek/tools/oocd.sh | 2 +-
boards/arm/tiva/lm4f120-launchpad/tools/oocd.sh | 2 +-
boards/arm/tiva/tm4c123g-launchpad/tools/oocd.sh | 2 +-
boards/arm/tiva/tm4c1294-launchpad/tools/oocd.sh | 2 +-
boards/arm/tiva/tm4c129e-launchpad/tools/oocd.sh | 2 +-
37 files changed, 59 insertions(+), 59 deletions(-)
diff --git a/Documentation/platforms/arm/a1x/index.rst
b/Documentation/platforms/arm/a1x/index.rst
index e1a3cd2f87..20a72b9151 100644
--- a/Documentation/platforms/arm/a1x/index.rst
+++ b/Documentation/platforms/arm/a1x/index.rst
@@ -12,7 +12,7 @@ have are supported by NuttX:
board, but the others may be compatible:
Refer to the NuttX board
- `README
<https://github.com/apache/nuttx/blob/master/boards/arm/a1x/pcduino-a10/README.txt>`__
+ `README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/a1x/boards/pcduino-a10/README.txt>`__
file for further information.
**STATUS**. This port was an experiment was was not completely
diff --git a/Documentation/platforms/arm/am335x/index.rst
b/Documentation/platforms/arm/am335x/index.rst
index b69e7342cc..901baf600f 100644
--- a/Documentation/platforms/arm/am335x/index.rst
+++ b/Documentation/platforms/arm/am335x/index.rst
@@ -20,7 +20,7 @@ AM335x are supported by NuttX:
- **NuttX-7.31**. An LCD driver was added in NuttX-7.31.
Refer to the Beaglebone Black board
- `README
<https://github.com/apache/nuttx/blob/master/boards/arm/am335x/beaglebone-black/README.txt>`__
+ `README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/am335x/boards/beaglebone-black/README.txt>`__
file for further, up-to-date information.
Supported Boards
diff --git a/Documentation/platforms/arm/efm32/index.rst
b/Documentation/platforms/arm/efm32/index.rst
index 6a42fd7f0b..120bc9b869 100644
--- a/Documentation/platforms/arm/efm32/index.rst
+++ b/Documentation/platforms/arm/efm32/index.rst
@@ -29,7 +29,7 @@ This is a port for the Silicon Laboratories' EFM32
supported are included, but not fully tested.
Refer to the EFM32 Gecko Starter Kit
- `README.txt
<https://github.com/apache/nuttx/blob/master/boards/arm/efm32/efm32-g8xx-stk/README.txt>`__
+ `README.txt
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/efm32/boards/efm32-g8xx-stk/README.txt>`__
file for further information.
#. **Olimex EFM32G880F120-STK**. This board features:
@@ -50,7 +50,7 @@ This is a port for the Silicon Laboratories' EFM32
required to make further progress in testing.
Refer to the Olimex EFM32G880F120-STK
- `README.txt
<https://github.com/apache/nuttx/blob/master/boards/arm/efm32/olimex-efm32g880f128-stk/README.txt>`__
+ `README.txt
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/efm32/boards/olimex-efm32g880f128-stk/README.txt>`__
for further information.
SiLabs EFM32 Giant Gecko
diff --git a/Documentation/platforms/arm/imx6/index.rst
b/Documentation/platforms/arm/imx6/index.rst
index 2b006dd118..88fd92f720 100644
--- a/Documentation/platforms/arm/imx6/index.rst
+++ b/Documentation/platforms/arm/imx6/index.rst
@@ -6,7 +6,7 @@ The basic port has been completed for the following i.MX6 board:
- **Sabre-6Quad**. This is a port to the NXP/Freescale Sabre-6Quad
board. Refer to the NuttX board
- `README
<https://github.com/apache/nuttx/blob/master/boards/arm/imx6/sabre-6quad/README.txt>`__
+ `README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/imx6/boards/sabre-6quad/README.txt>`__
file for further information.
**STATUS:** The basic, minimal port is code complete and introduced
@@ -18,7 +18,7 @@ The basic port has been completed for the following i.MX6
board:
Basic support of NuttX running in SMP mode on the i.MX6Q was also
accomplished in NuttX-7.16. However, there are still known issues
with SMP support on this platform as described in the
- `README
<https://github.com/apache/nuttx/blob/master/boards/arm/imx6/sabre-6quad/README.txt>`__
+ `README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/imx6/boards/sabre-6quad/README.txt>`__
file for the board.
Supported Boards
diff --git a/Documentation/platforms/arm/kinetis/index.rst
b/Documentation/platforms/arm/kinetis/index.rst
index 311247b345..9217400014 100644
--- a/Documentation/platforms/arm/kinetis/index.rst
+++ b/Documentation/platforms/arm/kinetis/index.rst
@@ -52,7 +52,7 @@ NuttX 7.17. Initial release includes two NSH configurations
with support
for on-board LEDs, buttons, and Ethernet with the on-board KSZ8081 PHY.
SDHC supported has been integrated, but not verified. Refer to the NuttX
board
-`README
<https://github.com/apache/nuttx/blob/master/boards/arm/kinetis/freedom-k64f/README.txt>`__
+`README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/kinetis/boards/freedom-k64f/README.txt>`__
file for further information.
**MK64FN1M0VMD12**. Architecture support for the \_MK64FN1M0VMD12 was
@@ -67,7 +67,7 @@ by
`TWR-SER
<http://www.nxp.com/pages/serial-usb-ethernet-can-rs232-485-tower-system-module:TWR-SER>`__
which includes (among other things), an RS232 and Ethernet connections.
Refer to the NuttX board
-`README
<https://github.com/apache/nuttx/blob/master/boards/arm/kinetis/twr-k64f120m/README.txt>`__
+`README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/kinetis/boards/twr-k64f120m/README.txt>`__
file for further information.
**Driver Status**.
@@ -90,7 +90,7 @@ NXP/FreeScale Kinetis K66
Support for the Kinetis K64 family and
specifically for the **NXP/Freescale Freedom K66F** board was
contributed by David Sidrane in NuttX 7.20. Refer to the NuttX board
-`README
<https://github.com/apache/nuttx/blob/master/boards/arm/kinetis/freedom-k66f/README.txt>`__
+`README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/kinetis/boards/freedom-k66f/README.txt>`__
file for further information.
**Driver Status**.
diff --git a/Documentation/platforms/arm/lc823450/index.rst
b/Documentation/platforms/arm/lc823450/index.rst
index ccce054004..be91d292e9 100644
--- a/Documentation/platforms/arm/lc823450/index.rst
+++ b/Documentation/platforms/arm/lc823450/index.rst
@@ -29,7 +29,7 @@ Semiconductor
<http://www.onsemi.com/PowerSolutions/evalBoard.do?id=LC823450XGEV
website as are LC823450 `related technical
documents
<http://www.onsemi.com/PowerSolutions/supportDoc.do?type=AppNotes&rpn=LC823450>`__.
Refer to the NuttX board
-`README
<https://github.com/apache/nuttx/blob/master/boards/arm/lc823450/lc823450-xgevk/README.txt>`__
+`README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/lc823450/boards/lc823450-xgevk/README.txt>`__
file for details of the NuttX port.
This port is intended to test LC823450 features including SMP. Supported
diff --git a/Documentation/platforms/arm/lpc17xx/index.rst
b/Documentation/platforms/arm/lpc17xx/index.rst
index 1f05d19e64..c500f1047c 100644
--- a/Documentation/platforms/arm/lpc17xx/index.rst
+++ b/Documentation/platforms/arm/lpc17xx/index.rst
@@ -75,7 +75,7 @@ boards.
- Support for the mbed board was contributed by Dave Marples and
released in NuttX-5.11. Refer to the NuttX board
- `README
<https://github.com/apache/nuttx/blob/master/boards/arm/lpc17xx_40xx/mbed/README.txt>`__
+ `README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/lpc17xx/boards/mbed/README.txt>`__
file for further information.
#. **Olimex LPC1766-STK**
@@ -90,7 +90,7 @@ boards.
- The NuttX-5.17 released added support for low-speed USB devices,
interrupt endpoints, and a *USB host HID keyboard class driver*.
- Refer to the NuttX board
- `README
<https://github.com/apache/nuttx/blob/master/boards/arm/lpc17xx_40xx/olimex-lpc1766stk/README.txt>`__
+ `README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/lpc17xx/boards/olimex-lpc1766stk/README.txt>`__
file for further information.
Verified configurations are now available for the NuttShell with
@@ -111,7 +111,7 @@ boards.
Verified configurations include DHCPD, the NuttShell (NSH), NuttX
graphis (NX), THTTPD, and USB mass storage device. Refer to the NuttX
board
- `README
<https://github.com/apache/nuttx/blob/master/boards/arm/lpc17xx_40xx/lpcxpresso-lpc1768/README.txt>`__
+ `README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/lpc17xx/boards/lpcxpresso-lpc1768/README.txt>`__
file for further information.
#. **Zilogic's ZKIT-ARM-1769 board**
@@ -121,7 +121,7 @@ boards.
NuttX-6.26. The NuttX Buildroot toolchain is used by default. Verifed
configurations include the "Hello, World!" example application and a
THTTPD demonstration. Refer to the NuttX board
- `README
<https://github.com/apache/nuttx/blob/master/boards/arm/lpc17xx_40xx/zkit-arm-1769/README.txt>`__
+ `README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/lpc17xx/boards/zkit-arm-1769/README.txt>`__
file for further information.
#. **Micromint Lincoln60 board with an NXP LPC1769**
@@ -130,7 +130,7 @@ boards.
NuttX-6.20. As contributed board support, I am unsure of what all has
been verfied and what has not. See the Microment website
and the NuttX board
- `README
<https://github.com/apache/nuttx/blob/master/boards/arm/lpc17xx_40xx/lincoln60/README.txt>`__
+ `README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/lpc17xx/boards/lincoln60/README.txt>`__
file for further information about the Lincoln board.
#. **U-Blox Modem Evaluation (LPCXpresso LPC1768)**
@@ -139,7 +139,7 @@ boards.
and made available in NuttX-7.15. This is a variant of the LPCXpresso
LPC1768 board support with special provisions for the U-Blox Model
Evaluation board. See the NuttX board
- `README
<https://github.com/apache/nuttx/blob/master/boards/arm/lpc17xx_40xx/u-blox-c027/README.txt>`__
+ `README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/lpc17xx/boards/u-blox-c027/README.txt>`__
file for further information about this port.
#. **Keil MCB1700 (LPC1768)**
diff --git a/Documentation/platforms/arm/lpc40xx/boards/lx_cpu/README.txt
b/Documentation/platforms/arm/lpc40xx/boards/lx_cpu/README.txt
index be2b44bef9..0b9743e87e 100644
--- a/Documentation/platforms/arm/lpc40xx/boards/lx_cpu/README.txt
+++ b/Documentation/platforms/arm/lpc40xx/boards/lx_cpu/README.txt
@@ -99,7 +99,7 @@ Using OpenOCD with the Olimex ARM-USB-OCD
Building OpenOCD under Cygwin:
- Refer to boards/arm/lpc17xx_40xx/olimex-lpc1766stk/README.txt
+ Refer to
Documentation/platforms/arm/lpc17xx/boards/olimex-lpc1766stk/README.txt
Installing OpenOCD in Ubuntu Linux:
diff --git a/Documentation/platforms/arm/lpc43xx/index.rst
b/Documentation/platforms/arm/lpc43xx/index.rst
index f442b5ed8d..b8772f1cf4 100644
--- a/Documentation/platforms/arm/lpc43xx/index.rst
+++ b/Documentation/platforms/arm/lpc43xx/index.rst
@@ -12,7 +12,7 @@ website
<http://shop.ngxtechnologies.com/product_info.php?cPath=21_37&products_i
for further information about this board.
- **STATUS:** Refer to the NuttX board
- `README
<https://github.com/apache/nuttx/blob/master/boards/arm/lpc43xx/lpc4330-xplorer/README.txt>`__
+ `README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/lpc43xx/boards/lpc4330-xplorer/README.txt>`__
file for more detailed information about this port.
- **NuttX-6.20** The basic LPC4330-Xplorer port is complete. The basic
@@ -28,7 +28,7 @@ website
<http://www.nxp.com/news/news-archive/2013/nxp-development-kit-based-on-
for more detailed information about the LPC4357 and the LPC4357-EVB.
- **STATUS:** Refer to the NuttX board
- `README
<https://github.com/apache/nuttx/blob/master/boards/arm/lpc43xx/lpc4357-evb/README.txt>`__
+ `README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/lpc43xx/boards/lpc4357-evb/README.txt>`__
file for more detailed information about this port.
- **NuttX-7.6**. The basic port is was contributed by Toby Duckworth.
@@ -42,7 +42,7 @@ for more detailed information about the LPC4357 and the
LPC4357-EVB.
development board featuring the NXP LPC4370FET100 MCU.
- **STATUS:** Refer to the NuttX board
- `README
<https://github.com/apache/nuttx/blob/master/boards/arm/lpc43xx/lpc4370-link2/README.txt>`__
+ `README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/lpc43xx/boards/lpc4370-link2/README.txt>`__
file for more detailed information about this port.
- **NuttX-7.12** The NXP LPC4370-Link2 port is was contributed by Lok
@@ -52,7 +52,7 @@ development board featuring the NXP LPC4370FET100 MCU.
LPC4337-WS development board featuring the NXP LPC4337JBD144 MCU.
- **STATUS:** Refer to the NuttX board
- `README
<https://github.com/apache/nuttx/blob/master/boards/arm/lpc43xx/lpc4337-ws/README.txt>`__
+ `README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/lpc43xx/boards/lpc4337-ws/README.txt>`__
file for more detailed information about this port.
- **NuttX-7.14** The NXP WaveShare LPC4337-WS port is was contributed
diff --git a/Documentation/platforms/arm/lpc54xx/index.rst
b/Documentation/platforms/arm/lpc54xx/index.rst
index d6db70d9dd..adb4ff3190 100644
--- a/Documentation/platforms/arm/lpc54xx/index.rst
+++ b/Documentation/platforms/arm/lpc54xx/index.rst
@@ -23,7 +23,7 @@ relevant changes incorporated in NuttX-7.26.
Framebuffer" feature also added in NuttX-7.29.
Refer to the LPCXpresso-LPC54628 board
-`README
<https://github.com/apache/nuttx/blob/master/boards/arm/lpc54xx/lpcxpresso-lpc54628/README.txt>`__
+`README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/lpc54xx/boards/lpcxpresso-lpc54628/README.txt>`__
file for more detailed information about this port.
Supported Boards
diff --git a/Documentation/platforms/arm/nuc1xx/index.rst
b/Documentation/platforms/arm/nuc1xx/index.rst
index cde4ca3d92..14f3504218 100644
--- a/Documentation/platforms/arm/nuc1xx/index.rst
+++ b/Documentation/platforms/arm/nuc1xx/index.rst
@@ -10,7 +10,7 @@ This initial support is very minimal: There is a NuttShell
(:ref:`NSH <nsh>`) configuration that might be the basis for an
application development. As of this writing, more device drivers are
needed to make this a more complete port. Refer to the NuttX board
-`README
<https://github.com/apache/nuttx/blob/master/boards/arm/nuc1xx/nutiny-nuc120/README.txt>`__
+`README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/nuc1xx/boards/nutiny-nuc120/README.txt>`__
file for further information.
**Memory Usage**. For a full-featured RTOS such as NuttX, providing
diff --git a/Documentation/platforms/arm/sam34/index.rst
b/Documentation/platforms/arm/sam34/index.rst
index 8a8b039ba8..25782bf678 100644
--- a/Documentation/platforms/arm/sam34/index.rst
+++ b/Documentation/platforms/arm/sam34/index.rst
@@ -53,7 +53,7 @@ Support for the SAM4L Xplained modules was added in
NuttX-6.29:
module
Refer to the NuttX board
-`README
<https://github.com/apache/nuttx/blob/master/boards/arm/sam34/sam4l-xplained/README.txt>`__
+`README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/sam34/boards/sam4l-xplained/README.txt>`__
file for further information.
**Memory Usage**. The ATSAM4LC4C comes in a 100-pin package and has
@@ -91,7 +91,7 @@ to NuttX by Masayuki Ishikawa in NuttX-7.19. The SAM4CM is a
dual-CPU
part and SMP was included for the ARMv7-M and SAM3/4 families. The
SAM4CMP-DB board support includes an NSH configuration that operates in
an SMP configuration. Refer to the NuttX board
-`README
<https://github.com/apache/nuttx/blob/master/boards/arm/sam34/sam4cmp-db/README.txt>`__
+`README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/sam34/boards/sam4cmp-db/README.txt>`__
file for further information.
Microchip SAM4E
diff --git a/Documentation/platforms/arm/sama5/boards/sama5d3x-ek/README.txt
b/Documentation/platforms/arm/sama5/boards/sama5d3x-ek/README.txt
index fb7743aea3..ef21c3e24b 100644
--- a/Documentation/platforms/arm/sama5/boards/sama5d3x-ek/README.txt
+++ b/Documentation/platforms/arm/sama5/boards/sama5d3x-ek/README.txt
@@ -502,13 +502,13 @@ Boot sequence
DRAMBOOT
--------
- See also boards/arm/sama5/sama5d4-ek/README.txt for a description of the
DRAMBOOT
+ See also Documentation/platforms/arm/sama5/boards/sama5d4-ek/README.txt for
a description of the DRAMBOOT
program. This is a tiny version of NuttX that can run out of internal
SRAM. If you put this program on the HSMCI1 microSD card as boot.bin, then
it will boot on power up and you can download NuttX directly into DRAM by
sending the nuttx.hex file over the serial connection.
- The boards/arm/sama5/sama5d4-ek/README.txt also describes variants AT25BOOT
and
+ The Documentation/platforms/arm/sama5/boards/sama5d4-ek/README.txt also
describes variants AT25BOOT and
SRAMBOOT. This have not been ported to the SAMA5D3x-EK, but are available
if they are useful too you.
diff --git a/Documentation/platforms/arm/sama5/index.rst
b/Documentation/platforms/arm/sama5/index.rst
index b50627800a..17f3f1ed89 100644
--- a/Documentation/platforms/arm/sama5/index.rst
+++ b/Documentation/platforms/arm/sama5/index.rst
@@ -102,7 +102,7 @@ There are ports to two Microchip SAMA5D3 boards:
*Tickless* operation.
Refer to the NuttX board
- `README
<https://github.com/apache/nuttx/blob/master/boards/arm/sama5/sama5d3x-ek/README.txt>`__
+ `README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/sama5/boards/sama5d3x-ek/README.txt>`__
file for further information.
**Microchip SAMA5D3 Xplained development board** This is the port of NuttX
@@ -124,7 +124,7 @@ does not have NOR FLASH and, as a consequence NuttX must
boot into SDRAM
with the help of U-Boot.
Refer to the NuttX board
-`README
<https://github.com/apache/nuttx/blob/master/boards/arm/sama5/sama5d3-xplained/README.txt>`__
+`README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/sama5/boards/sama5d3-xplained/README.txt>`__
file for further information.
@@ -150,7 +150,7 @@ There is a port in progress on one Microchip SAMA5D4 board:
that larger display. Support for a graphics media player is included
(although there were issues with the WM8904 audio CODEC on my board).
An SRAM bootloader was also included. Refer to the NuttX board
- `README
<https://github.com/apache/nuttx/blob/master/boards/arm/sama5/sama5d4-ek/README.txt>`__
+ `README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/sama5/boards/sama5d4-ek/README.txt>`__
file for current status.
**Development Environments:** 1) Linux with native Linux GNU toolchain,
diff --git
a/Documentation/platforms/arm/samd2l2/boards/samd21-xplained/README.txt
b/Documentation/platforms/arm/samd2l2/boards/samd21-xplained/README.txt
index 483d494f51..1174150fd8 100644
--- a/Documentation/platforms/arm/samd2l2/boards/samd21-xplained/README.txt
+++ b/Documentation/platforms/arm/samd2l2/boards/samd21-xplained/README.txt
@@ -27,7 +27,7 @@ Contents
STATUS/ISSUES
=============
- 1. See boards/arm/samd2l2/samd20-xplained/README.txt.
+ 1. See
Documentation/platforms/arm/samd2l2/boards/samd20-xplained/README.txt.
This port derives from the SAMD20 Xplained board board and all issues
there should apply.
diff --git
a/Documentation/platforms/arm/samv7/boards/same70-xplained/README.txt
b/Documentation/platforms/arm/samv7/boards/same70-xplained/README.txt
index b69778f1ed..916b1d3456 100644
--- a/Documentation/platforms/arm/samv7/boards/same70-xplained/README.txt
+++ b/Documentation/platforms/arm/samv7/boards/same70-xplained/README.txt
@@ -32,7 +32,7 @@ Status/Open Issues
via the EDBG VCOM and LED and buttons support. SDRAM and the HSMCI
SD card slot also appear to be fully functional.
-See also boards/arm/samv7/samv71-xult/README.txt
+See also Documentation/platforms/arm/samv7/boards/samv71-xult/README.txt
Serial Console
==============
diff --git
a/Documentation/platforms/arm/tiva/boards/tm4c123g-launchpad/README.txt
b/Documentation/platforms/arm/tiva/boards/tm4c123g-launchpad/README.txt
index 624342a61e..080e398793 100644
--- a/Documentation/platforms/arm/tiva/boards/tm4c123g-launchpad/README.txt
+++ b/Documentation/platforms/arm/tiva/boards/tm4c123g-launchpad/README.txt
@@ -231,7 +231,7 @@ Using OpenOCD and GDB with an FT2232 JTAG emulator
Building OpenOCD under Cygwin:
- Refer to boards/arm/lpc17xx_40xx/olimex-lpc1766stk/README.txt
+ Refer to
Documentation/platforms/arm/lpc17xx/boards/olimex-lpc1766stk/README.txt
Installing OpenOCD in Linux:
diff --git
a/Documentation/platforms/arm/tiva/boards/tm4c129e-launchpad/README.txt
b/Documentation/platforms/arm/tiva/boards/tm4c129e-launchpad/README.txt
index 892d1b8685..3a5b7bd5a7 100644
--- a/Documentation/platforms/arm/tiva/boards/tm4c129e-launchpad/README.txt
+++ b/Documentation/platforms/arm/tiva/boards/tm4c129e-launchpad/README.txt
@@ -33,8 +33,8 @@ EK-TM4C1294XL and DK-TM4C129X
from the DK-T4C129X. Refer to the following README files for additional
information that may be relevant to this board as well:
- boards/arm/tiva/tm4c1294-launchpad/README.txt
- boards/arm/tiva/dk-tm4c129x/README.txt
+ Documentation/platforms/arm/tiva/boards/tm4c1294-launchpad/README.txt
+ Documentation/platforms/arm/tiva/boards/dk-tm4c129x/README.txt
Status
======
diff --git a/Documentation/platforms/arm/tiva/index.rst
b/Documentation/platforms/arm/tiva/index.rst
index 7617ec3dec..9bc46a63dd 100644
--- a/Documentation/platforms/arm/tiva/index.rst
+++ b/Documentation/platforms/arm/tiva/index.rst
@@ -63,7 +63,7 @@ Header file support was contributed by Tiago
Maluta for this part. Jose Pablo Rojas V. is used those header file
changes to port NuttX to the TI/Stellaris EKK-LM3S9B96. That port was
available in the NuttX-6.20 release. Refer to the NuttX board
-`README
<https://github.com/apache/nuttx/blob/master/boards/arm/tiva/ekk-lm3s9b96/README.txt>`__
+`README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/tiva/boards/ekk-lm3s9b96/README.txt>`__
file for further information.
TI/SimpleLink CC13x0
@@ -115,7 +115,7 @@ LaunchPad `(EK-TM4C1294XL)
<http://www.ti.com/tool/ek-tm4c1294xl>`__.
NuttX-7.25.
Refer to the EK-TM4C1294XL board
-`README
<https://github.com/apache/nuttx/blob/master/boards/arm/tiva/tm4c1294-launchpad/README.txt>`__
+`README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/tiva/boards/tm4c1294-launchpad/README.txt>`__
file for more detailed information about this port.
TI/Tiva TM4C129E
@@ -133,7 +133,7 @@ LaunchPad `(EK-TM4C129EXL)
<https://www.ti.com/tool/EK-TM4C129EXL>`__.
example in the NuttX apps repository.
Refer to the EK-TM4C129EXL board
-`README
<https://github.com/apache/nuttx/blob/master/boards/arm/tiva/tm4c129e-launchpad/README.txt>`__
+`README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/tiva/boards/tm4c129e-launchpad/README.txt>`__
file for more detailed information about this port.
TI/Tiva TM4C129X
@@ -154,13 +154,13 @@ Development Kit `(DK-TM4C129X)
<http://www.ti.com/tool/dk-tm4c129x>`__.
(:ref:`NSH <nsh>`). Both
are networked enabled: One configured to support IPv4 and one
configured to supported IPv6. Instructions are included in the board
- `README
<https://github.com/apache/nuttx/blob/master/boards/arm/tiva/dk-tm4c129x/README.txt>`__
+ `README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/tiva/boards/dk-tm4c129x/README.txt>`__
file for configuring both IPv4 and IPv6 simultaneously.
- Tiva PWM and Quadrature Encoder drivers were contributed to NuttX in
7.18 by Young.
Refer to the DK-TM4C129X board
-`README
<https://github.com/apache/nuttx/blob/master/boards/arm/tiva/dk-tm4c129x/README.txt>`__
+`README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/arm/tiva/boards/dk-tm4c129x/README.txt>`__
file for more detailed information about this port.
TI/SimpleLink CC13x2
diff --git a/Documentation/platforms/avr/at32uc3/index.rst
b/Documentation/platforms/avr/at32uc3/index.rst
index d5fd061275..f633f9ef50 100644
--- a/Documentation/platforms/avr/at32uc3/index.rst
+++ b/Documentation/platforms/avr/at32uc3/index.rst
@@ -28,7 +28,7 @@ The basic, port was be released in NuttX-5.13. A complete
port will
include drivers for additional AVR32 UC3 devices -- like SPI and USB ---
and will be available in a later release, time permitting. Refer to the
NuttX board
-`README
<https://github.com/apache/nuttx/blob/master/boards/avr/at32uc3/avr32dev1/README.txt>`__
+`README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/avr/at32uc3/boards/avr32dev1/README.txt>`__
file for further information.
Supported Boards
diff --git a/Documentation/platforms/mips/pic32mz/index.rst
b/Documentation/platforms/mips/pic32mz/index.rst
index 959434c40e..d6fcd8a05d 100644
--- a/Documentation/platforms/mips/pic32mz/index.rst
+++ b/Documentation/platforms/mips/pic32mz/index.rst
@@ -36,7 +36,7 @@ timers.
**NuttX-9.0**. Cache operations were implemented.
Refer to the NuttX board
-`README
<https://github.com/apache/nuttx/blob/master/boards/mips/pic32mz/pic32mz-starterkit/README.txt>`__
+`README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/mips/pic32mz/boards/pic32mz-starterkit/README.txt>`__
file for further information.
**Development Environment:** Same as for the PIC32MZ.
diff --git a/Documentation/platforms/renesas/m16c/boards/skp16c26/README.txt
b/Documentation/platforms/renesas/m16c/boards/skp16c26/README.txt
index 99cbb7fd14..b8eaf5df22 100644
--- a/Documentation/platforms/renesas/m16c/boards/skp16c26/README.txt
+++ b/Documentation/platforms/renesas/m16c/boards/skp16c26/README.txt
@@ -1,4 +1,4 @@
-boards/renesas/m16c/skp16c26/README.txt
+Documentation/platforms/renesas/m16c/boards/skp16c26/README.txt
^^^^^^^^^^^^^^^^^^^^^^^^^^^
1. The buildroot package can be used to build an M16C toolchain. The toolchain
diff --git a/Documentation/platforms/renesas/m16c/index.rst
b/Documentation/platforms/renesas/m16c/index.rst
index 3ca099c79a..b01bee71be 100644
--- a/Documentation/platforms/renesas/m16c/index.rst
+++ b/Documentation/platforms/renesas/m16c/index.rst
@@ -14,7 +14,7 @@ Where the reference line is:
No workaround is known at this time. This is a show stopper for M16C.
Refer to the NuttX board
-`README
<https://github.com/apache/nuttx/blob/master/boards/renesas/m16c/skp16c26/README.txt>`__
+`README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/renesas/m16c/boards/skp16c26/README.txt>`__
file for further information.
Supported Boards
diff --git a/Documentation/platforms/x86/qemu/index.rst
b/Documentation/platforms/x86/qemu/index.rst
index 7ed64378df..7088e4d906 100644
--- a/Documentation/platforms/x86/qemu/index.rst
+++ b/Documentation/platforms/x86/qemu/index.rst
@@ -13,7 +13,7 @@ examples under QEMU. The port is reported to be functional on
the
Lizhuoyi contributed additional keyboard and VGA drivers. This is a
great, stable starting point for anyone interested in fleshing out the
x86 port! Refer to the NuttX
-`README
<https://github.com/apache/nuttx/blob/master/boards/x86/qemu/qemu-i486/README.txt>`__
+`README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/x86/qemu/boards/qemu-i486/README.txt>`__
file for further information.
Supported Boards
diff --git a/Documentation/platforms/z16/z16f/index.rst
b/Documentation/platforms/z16/z16f/index.rst
index 765b827471..5eb782a1e5 100644
--- a/Documentation/platforms/z16/z16f/index.rst
+++ b/Documentation/platforms/z16/z16f/index.rst
@@ -12,7 +12,7 @@ available in NuttX version 0.3.7. A working NuttShell (NSH)
configuration as added in NuttX-6.33 (although a patch is required to
work around an issue with a ZDS-II 5.0.1 tool problem). An ESPI
driver was added in NuttX-7.2. Refer to the NuttX board
-`README
<https://github.com/apache/nuttx/blob/master/boards/z16/z16f/z16f2800100zcog/README.txt>`__
+`README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/z16/z16f/boards/z16f2800100zcog/README.txt>`__
file for further information.
Supported Boards
diff --git a/Documentation/platforms/z80/z180/index.rst
b/Documentation/platforms/z80/z180/index.rst
index 9559011fc1..2412327f0e 100644
--- a/Documentation/platforms/z80/z180/index.rst
+++ b/Documentation/platforms/z80/z180/index.rst
@@ -16,7 +16,7 @@ makes additional P112 derivative hobbyist home brew computers.
P112 board. Boards from Kickstarter project will not be available,
however, until the third quarter of 2013. So it will be some time before
this port is verified on hardware. Refer to the NuttX board
-`README
<https://github.com/apache/nuttx/blob/master/boards/z80/z180/p112/README.txt>`__
+`README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/z80/z180/boards/p112/README.txt>`__
file for further information.
The arch/z80 directories contain files to support a variety of 8-bit
architectures
diff --git a/Documentation/platforms/z80/z8/index.rst
b/Documentation/platforms/z80/z8/index.rst
index 42b2c3f8c1..af64399d08 100644
--- a/Documentation/platforms/z80/z8/index.rst
+++ b/Documentation/platforms/z80/z8/index.rst
@@ -13,9 +13,9 @@ environment is either Windows native or Cygwin under Windows.
**STATUS:** This release has been verified only on the ZiLOG ZDS-II
Z8Encore! chip simulation as of nuttx-0.3.9. Refer to the NuttX board
README files for the
-`z8encore000zco
<https://github.com/apache/nuttx/blob/master/boards/z80/z8/z8encore000zco/README.txt>`__
+`z8encore000zco
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/z80/z8/boards/z8encore000zco/README.txt>`__
and for
-the\ `z8f64200100kit
<https://github.com/apache/nuttx/blob/master/boards/z80/z8/z8f64200100kit/README.txt>`__
+the\ `z8f64200100kit
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/z80/z8/boards/z8f64200100kit/README.txt>`__
for further information.
Supported Boards
diff --git a/Documentation/platforms/z80/z80/index.rst
b/Documentation/platforms/z80/z80/index.rst
index f16705024a..1cce01ba0f 100644
--- a/Documentation/platforms/z80/z80/index.rst
+++ b/Documentation/platforms/z80/z80/index.rst
@@ -9,7 +9,7 @@ Z80 instruction simulator called z80sim.
**STATUS:** This port is complete and stable to the extent that it can
be tested using an instruction set simulator. Refer to the NuttX board
-`README
<https://github.com/apache/nuttx/blob/master/boards/z80/z80/z80sim/README.txt>`__
+`README
<https://github.com/apache/nuttx/blob/master/Documentation/platforms/z80/z80/boards/z80sim/README.txt>`__
file for further information.
**XTRS: TRS-80 Model I/III/4/4P Emulator for Unix**. A very similar Z80
diff --git a/boards/arm/lpc17xx_40xx/lx_cpu/tools/oocd.sh
b/boards/arm/lpc17xx_40xx/lx_cpu/tools/oocd.sh
index d71e44b622..dd7b5eb8d1 100644
--- a/boards/arm/lpc17xx_40xx/lx_cpu/tools/oocd.sh
+++ b/boards/arm/lpc17xx_40xx/lx_cpu/tools/oocd.sh
@@ -1,6 +1,6 @@
#!/bin/sh
#
-# See boards/arm/lpc17xx_40xx/lx_cpu/README.txt for information about
+# See Documentation/platforms/arm/lpc40xx/boards/lx_cpu/README.txt for
information about
# this file.
TOPDIR=$1
diff --git a/boards/arm/lpc214x/zp214xpa/tools/oocd.sh
b/boards/arm/lpc214x/zp214xpa/tools/oocd.sh
index 9360b9fe8c..0413aca4a5 100755
--- a/boards/arm/lpc214x/zp214xpa/tools/oocd.sh
+++ b/boards/arm/lpc214x/zp214xpa/tools/oocd.sh
@@ -1,6 +1,6 @@
#!/usr/bin/env bash
#
-# See boards/arm/lpc214x/zp214xpa/README.txt for information about
+# See Documentation/platforms/arm/lpc214x/boards/zp214xpa/README.txt for
information about
# this file.
TOPDIR=$1
diff --git a/boards/arm/lpc31xx/olimex-lpc-h3131/tools/oocd.sh
b/boards/arm/lpc31xx/olimex-lpc-h3131/tools/oocd.sh
index 8162e3fc03..938c731a0c 100755
--- a/boards/arm/lpc31xx/olimex-lpc-h3131/tools/oocd.sh
+++ b/boards/arm/lpc31xx/olimex-lpc-h3131/tools/oocd.sh
@@ -1,6 +1,6 @@
#!/usr/bin/env bash
#
-# See boards/arm/lpc31xx/olimex-lpc-h3131/README.txt for information about
+# See Documentation/platforms/arm/lpc31xx/boards/olimex-lpc-h3131/README.txt
for information about
# this file.
TOPDIR=$1
diff --git a/boards/arm/tiva/dk-tm4c129x/tools/oocd.sh
b/boards/arm/tiva/dk-tm4c129x/tools/oocd.sh
index ad0281ffd7..45db542909 100755
--- a/boards/arm/tiva/dk-tm4c129x/tools/oocd.sh
+++ b/boards/arm/tiva/dk-tm4c129x/tools/oocd.sh
@@ -1,6 +1,6 @@
#!/usr/bin/env bash
#
-# See boards/arm/tiva/dk-tm4c129x/README.txt for information about
+# See Documentation/platforms/arm/tiva/boards/dk-tm4c129x/README.txt for
information about
# this file.
TOPDIR=$1
diff --git a/boards/arm/tiva/lm3s6965-ek/tools/oocd.sh
b/boards/arm/tiva/lm3s6965-ek/tools/oocd.sh
index 5d8a9ba127..c73c6be4d5 100755
--- a/boards/arm/tiva/lm3s6965-ek/tools/oocd.sh
+++ b/boards/arm/tiva/lm3s6965-ek/tools/oocd.sh
@@ -1,6 +1,6 @@
#!/usr/bin/env bash
#
-# See boards/arm/tiva/lm3s6965-ek/README.txt for information about
+# See Documentation/platforms/arm/tiva/boards/lm3s6965-ek/README.txt for
information about
# this file.
TOPDIR=$1
diff --git a/boards/arm/tiva/lm4f120-launchpad/tools/oocd.sh
b/boards/arm/tiva/lm4f120-launchpad/tools/oocd.sh
index d7726bdd42..c7c57bcde2 100755
--- a/boards/arm/tiva/lm4f120-launchpad/tools/oocd.sh
+++ b/boards/arm/tiva/lm4f120-launchpad/tools/oocd.sh
@@ -1,6 +1,6 @@
#!/usr/bin/env bash
#
-# See boards/arm/tiva/lm4f120-launchpad/README.txt for information about
+# See Documentation/platforms/arm/tiva/boards/lm4f120-launchpad/README.txt for
information about
# this file.
TOPDIR=$1
diff --git a/boards/arm/tiva/tm4c123g-launchpad/tools/oocd.sh
b/boards/arm/tiva/tm4c123g-launchpad/tools/oocd.sh
index 3ffd6ec9a6..c061313eda 100755
--- a/boards/arm/tiva/tm4c123g-launchpad/tools/oocd.sh
+++ b/boards/arm/tiva/tm4c123g-launchpad/tools/oocd.sh
@@ -1,6 +1,6 @@
#!/usr/bin/env bash
#
-# See boards/arm/tiva/tm4c123g-launchpad/README.txt for information about
+# See Documentation/platforms/arm/tiva/boards/tm4c123g-launchpad/README.txt
for information about
# this file.
TOPDIR=$1
diff --git a/boards/arm/tiva/tm4c1294-launchpad/tools/oocd.sh
b/boards/arm/tiva/tm4c1294-launchpad/tools/oocd.sh
index 796f6ef396..50fac61985 100755
--- a/boards/arm/tiva/tm4c1294-launchpad/tools/oocd.sh
+++ b/boards/arm/tiva/tm4c1294-launchpad/tools/oocd.sh
@@ -1,6 +1,6 @@
#!/usr/bin/env bash
#
-# See boards/arm/tiva/tm4c1294-launchpad/README.txt for information about
+# See Documentation/platforms/arm/tiva/boards/tm4c1294-launchpad/README.txt
for information about
# this file.
TOPDIR=$1
diff --git a/boards/arm/tiva/tm4c129e-launchpad/tools/oocd.sh
b/boards/arm/tiva/tm4c129e-launchpad/tools/oocd.sh
index f9b2e6522d..a8c66c0db0 100755
--- a/boards/arm/tiva/tm4c129e-launchpad/tools/oocd.sh
+++ b/boards/arm/tiva/tm4c129e-launchpad/tools/oocd.sh
@@ -1,6 +1,6 @@
#!/usr/bin/env bash
#
-# See boards/arm/tiva/tm4c129e-launchpad/README.txt for information about
+# See Documentation/platforms/arm/tiva/boards/tm4c129e-launchpad/README.txt
for information about
# this file.
TOPDIR=$1
