This is an automated email from the ASF dual-hosted git repository.
xiaoxiang pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/nuttx.git
The following commit(s) were added to refs/heads/master by this push:
new 863dcbbb45 DOC: Add information on STM32F0 and STM32L4
flashing/debugging.
863dcbbb45 is described below
commit 863dcbbb45eb2874733ad7d467021c92feade31b
Author: Tomasz 'CeDeROM' CEDRO <[email protected]>
AuthorDate: Mon Oct 14 20:20:27 2024 +0200
DOC: Add information on STM32F0 and STM32L4 flashing/debugging.
Signed-off-by: Tomasz 'CeDeROM' CEDRO <[email protected]>
---
Documentation/platforms/arm/stm32f0/index.rst | 27 +++++++++++++++++++++++++++
Documentation/platforms/arm/stm32l4/index.rst | 27 +++++++++++++++++++++++++++
2 files changed, 54 insertions(+)
diff --git a/Documentation/platforms/arm/stm32f0/index.rst
b/Documentation/platforms/arm/stm32f0/index.rst
index 3b0ecfbbac..9849ed5281 100644
--- a/Documentation/platforms/arm/stm32f0/index.rst
+++ b/Documentation/platforms/arm/stm32f0/index.rst
@@ -52,6 +52,33 @@ USB Yes
HDMI-CEC No
========== ======= =====
+Flashing and Debugging
+======================
+
+NuttX firmware Flashing with STLink probe and OpenOCD::
+
+ openocd -f interface/stlink.cfg -f target/stm32f0x.cfg -c 'program
nuttx.bin 0x08000000; reset run; exit'
+
+Remote target Reset with STLink probe and OpenOCD::
+
+ openocd -f interface/stlink.cfg -f target/stm32f0x.cfg -c 'init; reset run;
exit'
+
+Remote target Debug with STLink probe and OpenOCD:
+
+ 1. You need to have NuttX built with debug symbols, see :ref:`debugging`.
+
+ 2. Launch the OpenOCD GDB server::
+
+ openocd -f interface/stlink.cfg -f target/stm32f0x.cfg -c 'init; reset
halt'
+
+ 3. You can now attach to remote OpenOCD GDB server with your favorite
debugger,
+ for instance gdb::
+
+ arm-none-eabi-gdb --tui nuttx -ex 'target extended-remote localhost:3333'
+ (gdb) monitor reset halt
+ (gdb) breakpoint nsh_main
+ (gdb) continue
+
Supported Boards
================
diff --git a/Documentation/platforms/arm/stm32l4/index.rst
b/Documentation/platforms/arm/stm32l4/index.rst
index 4d094ae271..6be0b2f932 100644
--- a/Documentation/platforms/arm/stm32l4/index.rst
+++ b/Documentation/platforms/arm/stm32l4/index.rst
@@ -104,6 +104,33 @@ OCTOSPI No
OCTOSPIIOM No
========== ======= ==============================
+Flashing and Debugging
+======================
+
+NuttX firmware Flashing with STLink probe and OpenOCD::
+
+ openocd -f interface/stlink.cfg -f target/stm32l4x.cfg -c 'program
nuttx.bin 0x08000000; reset run; exit'
+
+Remote target Reset with STLink probe and OpenOCD::
+
+ openocd -f interface/stlink.cfg -f target/stm32l4x.cfg -c 'init; reset run;
exit'
+
+Remote target Debug with STLink probe and OpenOCD:
+
+ 1. You need to have NuttX built with debug symbols, see :ref:`debugging`.
+
+ 2. Launch the OpenOCD GDB server::
+
+ openocd -f interface/stlink.cfg -f target/stm32l4x.cfg -c 'init; reset
halt'
+
+ 3. You can now attach to remote OpenOCD GDB server with your favorite
debugger,
+ for instance gdb::
+
+ arm-none-eabi-gdb --tui nuttx -ex 'target extended-remote localhost:3333'
+ (gdb) monitor reset halt
+ (gdb) breakpoint nsh_main
+ (gdb) continue
+
Supported Boards
================
