This is an automated email from the ASF dual-hosted git repository.
xiaoxiang pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/nuttx.git
The following commit(s) were added to refs/heads/master by this push:
new 11f412b7af fix nxstyle
11f412b7af is described below
commit 11f412b7afac90df59c5d777dfa998570b7e5f74
Author: simbit18 <[email protected]>
AuthorDate: Mon Dec 9 14:36:54 2024 +0100
fix nxstyle
Removed extra spaces from .h and .c files
---
arch/arm/src/at32/at32_gpio.h | 2 +-
arch/arm/src/at32/at32_tim.c | 2 +-
arch/arm/src/at32/at32_uid.c | 2 +-
arch/arm/src/at32/hardware/at32_adc_v1.h | 2 +-
arch/arm/src/at32/hardware/at32_can.h | 4 +-
arch/arm/src/at32/hardware/at32f43xxx_rcc.h | 6 +--
arch/arm/src/at32/hardware/at32f43xxx_syscfg.h | 4 +-
arch/arm/src/at32/hardware/at32f43xxx_uart.h | 2 +-
arch/arm/src/gd32f4/gd32f4xx_progmem.c | 4 +-
arch/arm/src/imxrt/hardware/imxrt_flexio.h | 2 +-
arch/arm/src/imxrt/hardware/rt117x/imxrt117x_pmu.h | 4 +-
arch/arm/src/stm32/hardware/stm32_flash.h | 2 +-
arch/arm/src/stm32/stm32_lowputc.c | 6 +--
arch/arm/src/stm32h5/hardware/stm32_adc.h | 4 +-
arch/arm/src/stm32h5/stm32_lowputc.c | 10 ++--
arch/arm/src/stm32u5/hardware/stm32u5xx_spi.h | 2 +-
arch/arm/src/stm32u5/hardware/stm32u5xx_syscfg.h | 2 +-
arch/arm/src/xmc4/xmc4_lowputc.c | 58 +++++++++++-----------
arch/arm64/include/rk3399/chip.h | 2 +-
arch/arm64/include/zynq-mpsoc/chip.h | 2 +-
arch/arm64/src/imx9/hardware/imx9_enet.h | 2 +-
.../src/hpm6000/hardware/hpm6300/hpm6300_sysctl.h | 2 +-
boards/arm/at32/at32f437-mini/src/at32_at24.c | 2 +-
.../stm32/nucleo-f429zi/src/stm32_appinitialize.c | 2 +-
boards/arm/stm32h5/nucleo-h563zi/include/board.h | 2 +-
.../xtensa/esp32s3/esp32s3-devkit/include/board.h | 2 +-
fs/mnemofs/mnemofs_ctz.c | 2 +-
include/nuttx/lin.h | 2 +-
include/nuttx/timers/pwm.h | 2 +-
29 files changed, 70 insertions(+), 70 deletions(-)
diff --git a/arch/arm/src/at32/at32_gpio.h b/arch/arm/src/at32/at32_gpio.h
index 1b6a1b3851..3e877750a6 100644
--- a/arch/arm/src/at32/at32_gpio.h
+++ b/arch/arm/src/at32/at32_gpio.h
@@ -50,7 +50,7 @@
/* Bit-encoded input to at32_configgpio() */
-#if defined(CONFIG_AT32_AT32F43XX)
+#if defined(CONFIG_AT32_AT32F43XX)
/* Each port bit of the general-purpose I/O (GPIO) ports can be
* individually configured by software in several modes:
*
diff --git a/arch/arm/src/at32/at32_tim.c b/arch/arm/src/at32/at32_tim.c
index e2a6e2ea51..7573d8505c 100644
--- a/arch/arm/src/at32/at32_tim.c
+++ b/arch/arm/src/at32/at32_tim.c
@@ -263,7 +263,7 @@
defined(CONFIG_AT32_TIM9) || defined(CONFIG_AT32_TIM10) || \
defined(CONFIG_AT32_TIM11) || defined(CONFIG_AT32_TIM12) || \
defined(CONFIG_AT32_TIM13) || defined(CONFIG_AT32_TIM14) || \
- defined(CONFIG_AT32_TIM20)
+ defined(CONFIG_AT32_TIM20)
/****************************************************************************
* Private Types
diff --git a/arch/arm/src/at32/at32_uid.c b/arch/arm/src/at32/at32_uid.c
index 5aaa31c407..25f8acf8f7 100644
--- a/arch/arm/src/at32/at32_uid.c
+++ b/arch/arm/src/at32/at32_uid.c
@@ -29,7 +29,7 @@
#include "hardware/at32_memorymap.h"
#include "at32_uid.h"
-#ifdef AT32_SYSMEM_UID
+#ifdef AT32_SYSMEM_UID
/****************************************************************************
* Public Functions
diff --git a/arch/arm/src/at32/hardware/at32_adc_v1.h
b/arch/arm/src/at32/hardware/at32_adc_v1.h
index 03b27df0fa..713a092962 100644
--- a/arch/arm/src/at32/hardware/at32_adc_v1.h
+++ b/arch/arm/src/at32/hardware/at32_adc_v1.h
@@ -612,7 +612,7 @@
/* Calibration value register */
-#define ADC_CALVAL_SHIFT (0)
+#define ADC_CALVAL_SHIFT (0)
#define ADC_CALVAL_MASK (0x7f << ADC_CALVAL_SHIFT)
# define ADC_CALVAL(n) (n << ADC_CALVAL_SHIFT)
diff --git a/arch/arm/src/at32/hardware/at32_can.h
b/arch/arm/src/at32/hardware/at32_can.h
index bc727e0232..34bf9dfc26 100644
--- a/arch/arm/src/at32/hardware/at32_can.h
+++ b/arch/arm/src/at32/hardware/at32_can.h
@@ -307,7 +307,7 @@
#define CAN_ESTS_BOF (1 << 0) /* Bus-off flag */
#define CAN_ESTS_ETR_SHIFT (4) /* Error
type record */
-#define CAN_ESTS_ETR_MASK (7 << CAN_ESTS_ETR_SHIFT)
+#define CAN_ESTS_ETR_MASK (7 << CAN_ESTS_ETR_SHIFT)
#define CAN_ESTS_ETR_NONE (0 << CAN_ESTS_ETR_SHIFT) /* No
error */
#define CAN_ESTS_ETR_STUFF (1 << CAN_ESTS_ETR_SHIFT) /* Stuff
error */
#define CAN_ESTS_ETR_FORM (2 << CAN_ESTS_ETR_SHIFT) /* Form
error */
@@ -318,7 +318,7 @@
#define CAN_ESTS_ETR_SOFT (7 << CAN_ESTS_ETR_SHIFT) /* Set
by soft */
#define CAN_ESTS_TEC_SHIFT (16) /* Transmit error counter */
-#define CAN_ESTS_TEC_MASK (0xff << CAN_ESTS_TEC_SHIFT)
+#define CAN_ESTS_TEC_MASK (0xff << CAN_ESTS_TEC_SHIFT)
#define CAN_ESTS_REC_SHIFT (24) /* Receive error counter */
#define CAN_ESTS_REC_MASK (0xff << CAN_ESTS_REC_SHIFT)
diff --git a/arch/arm/src/at32/hardware/at32f43xxx_rcc.h
b/arch/arm/src/at32/hardware/at32f43xxx_rcc.h
index 90bf1e391a..46de4253e4 100644
--- a/arch/arm/src/at32/hardware/at32f43xxx_rcc.h
+++ b/arch/arm/src/at32/hardware/at32f43xxx_rcc.h
@@ -97,11 +97,11 @@
/* PLL configuration register */
#define CRM_PLL_CFG_PLL_MS_SHIFT (0) /* PLL pre-division, range: 1~15 */
-#define CRM_PLL_CFG_PLL_MS_MASK (15 << CRM_PLL_CFG_PLL_MS_SHIFT)
+#define CRM_PLL_CFG_PLL_MS_MASK (15 << CRM_PLL_CFG_PLL_MS_SHIFT)
# define CRM_PLL_CFG_PLL_MS(n) ((n) << CRM_PLL_CFG_PLL_MS_SHIFT) /* n
= 1..15 */
#define CRM_PLL_CFG_PLL_NS_SHIFT (6) /* PLL Multiplication
Factor,range: 31~500 */
-#define CRM_PLL_CFG_PLL_NS_MASK (0x1FF << CRM_PLL_CFG_PLL_NS_SHIFT)
+#define CRM_PLL_CFG_PLL_NS_MASK (0x1FF << CRM_PLL_CFG_PLL_NS_SHIFT)
# define CRM_PLL_CFG_PLL_NS(n) ((n) << CRM_PLL_CFG_PLL_NS_SHIFT) /* n
= 31..500 */
#define CRM_PLL_CFG_PLL_FR_SHIFT (16) /* PLL post-division */
@@ -510,7 +510,7 @@
#define CRM_MISC1_HICK_TO_SCLK (1 << 14) /* HICK as system clock
frequency select */
#define CRM_MISC1_CLKOUT2_SEL2_SHIFT (16) /* Clock output2 sel2 */
-#define CRM_MISC1_CLKOUT2_SEL2_MASK (15 <<
CRM_MISC1_CLKOUT2_SEL2_SHIFT)
+#define CRM_MISC1_CLKOUT2_SEL2_MASK (15 <<
CRM_MISC1_CLKOUT2_SEL2_SHIFT)
# define CRM_MISC1_CLKOUT2_SEL2_USB (0 <<
CRM_MISC1_CLKOUT2_SEL2_SHIFT) /* Select USB output */
# define CRM_MISC1_CLKOUT2_SEL2_ADC (1 <<
CRM_MISC1_CLKOUT2_SEL2_SHIFT) /* Select ADC output */
# define CRM_MISC1_CLKOUT2_SEL2_HICK (2 <<
CRM_MISC1_CLKOUT2_SEL2_SHIFT) /* Select HICK output */
diff --git a/arch/arm/src/at32/hardware/at32f43xxx_syscfg.h
b/arch/arm/src/at32/hardware/at32f43xxx_syscfg.h
index 65710ea3bc..580be58529 100644
--- a/arch/arm/src/at32/hardware/at32f43xxx_syscfg.h
+++ b/arch/arm/src/at32/hardware/at32f43xxx_syscfg.h
@@ -71,13 +71,13 @@
#define SCFG_CFG1_IR_POL (1 << 5) /* Infrared output
polarity selection */
#define SCFG_CFG1_IR_SRC_SEL_SHIFT (6) /* Infrared modulation
envelope signal source selection */
-#define SCFG_CFG1_IR_SRC_SEL_MASK (3 << SCFG_CFG1_IR_SRC_SEL_SHIFT)
+#define SCFG_CFG1_IR_SRC_SEL_MASK (3 << SCFG_CFG1_IR_SRC_SEL_SHIFT)
# define SCFG_CFG1_IR_SRC_SEL_TMR10 (0 << SCFG_CFG1_IR_SRC_SEL_SHIFT)
/* Source use TRM10 */
# define SCFG_CFG1_IR_SRC_SEL_USART1 (1 << SCFG_CFG1_IR_SRC_SEL_SHIFT)
/* Source use USART1 */
# define SCFG_CFG1_IR_SRC_SEL_USART2 (2 << SCFG_CFG1_IR_SRC_SEL_SHIFT)
/* Source use USART2 */
#define SCFG_CFG1_SWAP_XMC_SHIFT (6) /* Infrared modulation
envelope signal source selection */
-#define SCFG_CFG1_SWAP_XMC_MASK (3 << SCFG_CFG1_SWAP_XMC_SHIFT)
+#define SCFG_CFG1_SWAP_XMC_MASK (3 << SCFG_CFG1_SWAP_XMC_SHIFT)
# define SCFG_CFG1_SWAP_XMC_NONE (0 << SCFG_CFG1_SWAP_XMC_SHIFT) /*
No swap */
# define SCFG_CFG1_SWAP_XMC_SDRAM1 (1 << SCFG_CFG1_SWAP_XMC_SHIFT) /*
SDRAM swap1 */
# define SCFG_CFG1_SWAP_XMC_QSPI2 (2 << SCFG_CFG1_SWAP_XMC_SHIFT) /*
QSPI2 swap */
diff --git a/arch/arm/src/at32/hardware/at32f43xxx_uart.h
b/arch/arm/src/at32/hardware/at32f43xxx_uart.h
index d4285e6920..234948540c 100644
--- a/arch/arm/src/at32/hardware/at32f43xxx_uart.h
+++ b/arch/arm/src/at32/hardware/at32f43xxx_uart.h
@@ -176,7 +176,7 @@
#define USART_CTRL1_TCDT_MASK (31 << USART_CTRL1_TCDT_SHIFT)
#define USART_CTRL1_TCDT(X) ((X) << USART_CTRL1_TCDT_SHIFT)
#define USART_CTRL1_TSDT_SHIFT (21) /* transmit start delay time
*/
-#define USART_CTRL1_TSDT_MASK (31 << USART_CTRL1_TSDT_SHIFT)
+#define USART_CTRL1_TSDT_MASK (31 << USART_CTRL1_TSDT_SHIFT)
#define USART_CTRL1_TSDT(X) ((X) << USART_CTRL1_TSDT_SHIFT)
#define USART_CTRL1_DBN1 (1 << 28) /* Data bit num */
diff --git a/arch/arm/src/gd32f4/gd32f4xx_progmem.c
b/arch/arm/src/gd32f4/gd32f4xx_progmem.c
index 3f8b35c5db..e1ceed1767 100644
--- a/arch/arm/src/gd32f4/gd32f4xx_progmem.c
+++ b/arch/arm/src/gd32f4/gd32f4xx_progmem.c
@@ -74,12 +74,12 @@
# define FMC_PROGMEM_SECTOR_EADDR (0x0810FFFF)
# elif defined(CONFIG_GD32F4_FLASH_CONFIG_K)
-#if defined(CONFIG_GD32F4_GD32F450)
+#if defined(CONFIG_GD32F4_GD32F450)
# define FMC_PROGMEM_SECTOR_SIZES {_K(16), _K(16), _K(16), _K(16)}
# define FMC_PROGMEM_SECTOR_NUM (4)
# define FMC_PROGMEM_SECTOR_SADDR (0x08100000)
# define FMC_PROGMEM_SECTOR_EADDR (0x0810FFFF)
-#elif defined(CONFIG_GD32F4_GD32F470)
+#elif defined(CONFIG_GD32F4_GD32F470)
# define FMC_PROGMEM_SECTOR_SIZES {_K(256), _K(256), _K(256), _K(256)}
# define FMC_PROGMEM_SECTOR_NUM (256)
# define FMC_PROGMEM_SECTOR_SADDR (0x08200000)
diff --git a/arch/arm/src/imxrt/hardware/imxrt_flexio.h
b/arch/arm/src/imxrt/hardware/imxrt_flexio.h
index eec91affbf..099bb94592 100644
--- a/arch/arm/src/imxrt/hardware/imxrt_flexio.h
+++ b/arch/arm/src/imxrt/hardware/imxrt_flexio.h
@@ -41,7 +41,7 @@
#define IMXRT_FLEXIO_SHIFTSTAT_OFFSET 0x0010 /* Shifter Status Register,
offset: 0x10 */
#define IMXRT_FLEXIO_SHIFTERR_OFFSET 0x0014 /* Shifter Error Register,
offset: 0x14 */
#define IMXRT_FLEXIO_TIMSTAT_OFFSET 0x0018 /* Timer Status Register,
offset: 0x18 */
-#define IMXRT_FLEXIO_SHIFTSIEN_OFFSET 0x0020 /* Shift Enable, offset: 0x20
*/
+#define IMXRT_FLEXIO_SHIFTSIEN_OFFSET 0x0020 /* Shift Enable, offset: 0x20
*/
#define IMXRT_FLEXIO_SHIFTEIEN_OFFSET 0x0024 /* Shifter Error Interrupt
Enable, offset: 0x24 */
#define IMXRT_FLEXIO_TIMIEN_OFFSET 0x0028 /* Timer Interrupt Enable
Register, offset: 0x28 */
#define IMXRT_FLEXIO_SHIFTSDEN_OFFSET 0x0030 /* Shifter Status DMA Enable,
offset: 0x30 */
diff --git a/arch/arm/src/imxrt/hardware/rt117x/imxrt117x_pmu.h
b/arch/arm/src/imxrt/hardware/rt117x/imxrt117x_pmu.h
index 51563f75f1..de394dd026 100644
--- a/arch/arm/src/imxrt/hardware/rt117x/imxrt117x_pmu.h
+++ b/arch/arm/src/imxrt/hardware/rt117x/imxrt117x_pmu.h
@@ -120,7 +120,7 @@
#define ANADIG_PMU_PMU_BIAS_CTRL_WB_CFG_1P8(n) (((n) <<
ANADIG_PMU_PMU_BIAS_CTRL_WB_CFG_1P8_SHIFT) &
ANADIG_PMU_PMU_BIAS_CTRL_WB_CFG_1P8_MASK)
#define ANADIG_PMU_PMU_BIAS_CTRL_WB_VDD_SEL_1P8 (1 << 14) /* Bit 14:
wb_vdd_sel_1p8 */
-#define ANADIG_PMU_PMU_BIAS_CTRL_WB_CFG_1P8_WELL_SELECT (0x1) /* Bit 0: WELL
Select */
+#define ANADIG_PMU_PMU_BIAS_CTRL_WB_CFG_1P8_WELL_SELECT (0x1) /* Bit 0: WELL
Select */
#define ANADIG_PMU_PMU_BIAS_CTRL_WB_CFG_1P8_VOLTAGE_THRESHOLD_SHIFT (1)
#define ANADIG_PMU_PMU_BIAS_CTRL_WB_CFG_1P8_VOLTAGE_THRESHOLD_MASK (0x1 <<
ANADIG_PMU_PMU_BIAS_CTRL_WB_CFG_1P8_VOLTAGE_THRESHOLD_SHIFT)
@@ -130,7 +130,7 @@
#define ANADIG_PMU_PMU_BIAS_CTRL_WB_CFG_1P8_DRIVE_STRENGTH_MASK (0x7 <<
ANADIG_PMU_PMU_BIAS_CTRL_WB_CFG_1P8_DRIVE_STRENGTH_SHIFT)
#define ANADIG_PMU_PMU_BIAS_CTRL_WB_CFG_1P8_DRIVE_STRENGTH(n) ((n) <<
ANADIG_PMU_PMU_BIAS_CTRL_WB_CFG_1P8_DRIVE_STRENGTH_SHIFT) &
ANADIG_PMU_PMU_BIAS_CTRL_WB_CFG_1P8_DRIVE_STRENGTH_MASK)
-#define ANADIG_PMU_PMU_BIAS_CTRL_WB_CFG_1P8_OSCILLATOR_FREQ_SHIFT (5) /* Bits
5:8: Oscillator settings */
+#define ANADIG_PMU_PMU_BIAS_CTRL_WB_CFG_1P8_OSCILLATOR_FREQ_SHIFT (5) /* Bits
5:8: Oscillator settings */
#define ANADIG_PMU_PMU_BIAS_CTRL_WB_CFG_1P8_OSCILLATOR_FREQ_MASK (0xf <<
ANADIG_PMU_PMU_BIAS_CTRL_WB_CFG_1P8_OSCILLATOR_FREQ_SHIFT)
#define ANADIG_PMU_PMU_BIAS_CTRL_WB_CFG_1P8_OSCILLATOR_FREQ(n) ((n) <<
ANADIG_PMU_PMU_BIAS_CTRL_WB_CFG_1P8_OSCILLATOR_FREQ_SHIFT) &
ANADIG_PMU_PMU_BIAS_CTRL_WB_CFG_1P8_OSCILLATOR_FREQ_MASK)
diff --git a/arch/arm/src/stm32/hardware/stm32_flash.h
b/arch/arm/src/stm32/hardware/stm32_flash.h
index 44feb59756..2da3181508 100644
--- a/arch/arm/src/stm32/hardware/stm32_flash.h
+++ b/arch/arm/src/stm32/hardware/stm32_flash.h
@@ -203,7 +203,7 @@
# elif defined(CONFIG_STM32_FLASH_CONFIG_E)
# define STM32_FLASH_SIZE 128 * 4096
# endif
-# elif defined(CONFIG_STM32_STM32G49XX)
+# elif defined(CONFIG_STM32_STM32G49XX)
# elif defined(CONFIG_STM32_FLASH_CONFIG_C)
# define STM32_FLASH_NPAGES 128
# define STM32_FLASH_PAGESIZE 2048
diff --git a/arch/arm/src/stm32/stm32_lowputc.c
b/arch/arm/src/stm32/stm32_lowputc.c
index 44f65ae662..ff9659c971 100644
--- a/arch/arm/src/stm32/stm32_lowputc.c
+++ b/arch/arm/src/stm32/stm32_lowputc.c
@@ -308,9 +308,9 @@
# define STM32_BRR_VALUE \
(((STM32_APBCLOCK & 0xf0000000) / STM32_CONSOLE_BAUD) << 4) + \
(((STM32_APBCLOCK & 0x0fffffff) << 4) / STM32_CONSOLE_BAUD)
-# define STM32_PRESC_VALUE 0x7
+# define STM32_PRESC_VALUE 0x7
-# else
+# else
# if defined(CONFIG_STM32_STM32F30XX) || defined(CONFIG_STM32_STM32F33XX)
|| \
defined(CONFIG_STM32_STM32F37XX) || defined(CONFIG_STM32_STM32G4XXX)
@@ -668,7 +668,7 @@ void stm32_lowsetup(void)
#if CONSOLE_LPUART > 0 && defined(CONFIG_STM32_STM32G4XXX)
putreg32(STM32_PRESC_VALUE, STM32_CONSOLE_BASE + STM32_USART_PRESC_OFFSET);
-#endif
+#endif
putreg32(STM32_BRR_VALUE, STM32_CONSOLE_BASE + STM32_USART_BRR_OFFSET);
diff --git a/arch/arm/src/stm32h5/hardware/stm32_adc.h
b/arch/arm/src/stm32h5/hardware/stm32_adc.h
index 35dc2668c2..9c19701126 100644
--- a/arch/arm/src/stm32h5/hardware/stm32_adc.h
+++ b/arch/arm/src/stm32h5/hardware/stm32_adc.h
@@ -511,13 +511,13 @@
/* ADC analog watchdog 2 configuration register */
#define ADC_AWD2CR_CH_SHIFT (0)
-#define ADC_AWD2CR_CH_MASK (0xfffff << ADC_AWD2CR_CH_SHIFT)
+#define ADC_AWD2CR_CH_MASK (0xfffff << ADC_AWD2CR_CH_SHIFT)
# define ADC_AWD2CR_CH(n) (1 << (n)) /* Channel n=0..19*/
/* ADC analog watchdog 3 configuration register */
#define ADC_AWD3CR_CH_SHIFT (0)
-#define ADC_AWD3CR_CH_MASK (0xfffff << ADC_AWD3CR_CH_SHIFT)
+#define ADC_AWD3CR_CH_MASK (0xfffff << ADC_AWD3CR_CH_SHIFT)
# define ADC_AWD3CR_CH(n) (1 << (n)) /* Channel n=0..19*/
/* ADC differential mode selection register */
diff --git a/arch/arm/src/stm32h5/stm32_lowputc.c
b/arch/arm/src/stm32h5/stm32_lowputc.c
index 4ad64eb4c9..7de76e7300 100644
--- a/arch/arm/src/stm32h5/stm32_lowputc.c
+++ b/arch/arm/src/stm32h5/stm32_lowputc.c
@@ -49,7 +49,7 @@
# define STM32H5_CONSOLE_BASE STM32_LPUART1_BASE
# define STM32H5_APBCLOCK STM32_PCLK1_FREQUENCY
# define STM32H5_CONSOLE_APBREG STM32_RCC_APB3ENR
-# define STM32H5_CONSOLE_APBEN RCC_APB3ENR_LPUART1EN
+# define STM32H5_CONSOLE_APBEN RCC_APB3ENR_LPUART1EN
# define STM32H5_CONSOLE_BAUD CONFIG_LPUART1_BAUD
# define STM32H5_CONSOLE_BITS CONFIG_LPUART1_BITS
# define STM32H5_CONSOLE_PARITY CONFIG_LPUART1_PARITY
@@ -67,8 +67,8 @@
# elif defined(CONFIG_USART1_SERIAL_CONSOLE)
# define STM32H5_CONSOLE_BASE STM32_USART1_BASE
# define STM32H5_APBCLOCK STM32_PCLK2_FREQUENCY
-# define STM32H5_CONSOLE_APBREG STM32_RCC_APB2ENR
-# define STM32H5_CONSOLE_APBEN RCC_APB2ENR_USART1EN
+# define STM32H5_CONSOLE_APBREG STM32_RCC_APB2ENR
+# define STM32H5_CONSOLE_APBEN RCC_APB2ENR_USART1EN
# define STM32H5_CONSOLE_BAUD CONFIG_USART1_BAUD
# define STM32H5_CONSOLE_BITS CONFIG_USART1_BITS
# define STM32H5_CONSOLE_PARITY CONFIG_USART1_PARITY
@@ -372,9 +372,9 @@
# define STM32_BRR_VALUE \
(((STM32_APBCLOCK & 0xf0000000) / STM32_CONSOLE_BAUD) << 4) + \
(((STM32_APBCLOCK & 0x0fffffff) << 4) / STM32_CONSOLE_BAUD)
-# define STM32_PRESC_VALUE 0x7
+# define STM32_PRESC_VALUE 0x7
-# else
+# else
/* Baud rate for standard USART (SPI mode included):
*
diff --git a/arch/arm/src/stm32u5/hardware/stm32u5xx_spi.h
b/arch/arm/src/stm32u5/hardware/stm32u5xx_spi.h
index 7b00c1bcc2..e7d98a97ae 100644
--- a/arch/arm/src/stm32u5/hardware/stm32u5xx_spi.h
+++ b/arch/arm/src/stm32u5/hardware/stm32u5xx_spi.h
@@ -32,7 +32,7 @@
#if defined(CONFIG_STM32U5_STM32U535XX) || defined(CONFIG_STM32U5_STM32U545XX)
|| \
defined(CONFIG_STM32U5_STM32U575XX) || defined(CONFIG_STM32U5_STM32U585XX)
|| \
defined(CONFIG_STM32U5_STM32U59XX) || defined(CONFIG_STM32U5_STM32U59AXX)
|| \
- defined(CONFIG_STM32U5_STM32U5A5XX) || defined(CONFIG_STM32U5_STM32U5A9XX)
+ defined(CONFIG_STM32U5_STM32U5A5XX) || defined(CONFIG_STM32U5_STM32U5A9XX)
/****************************************************************************
* Pre-processor Definitions
diff --git a/arch/arm/src/stm32u5/hardware/stm32u5xx_syscfg.h
b/arch/arm/src/stm32u5/hardware/stm32u5xx_syscfg.h
index f47743b2fa..56fc25f062 100644
--- a/arch/arm/src/stm32u5/hardware/stm32u5xx_syscfg.h
+++ b/arch/arm/src/stm32u5/hardware/stm32u5xx_syscfg.h
@@ -33,7 +33,7 @@
#if defined(CONFIG_STM32U5_STM32U535XX) || defined(CONFIG_STM32U5_STM32U545XX)
|| \
defined(CONFIG_STM32U5_STM32U575XX) || defined(CONFIG_STM32U5_STM32U585XX)
|| \
defined(CONFIG_STM32U5_STM32U59XX) || defined(CONFIG_STM32U5_STM32U59AXX)
|| \
- defined(CONFIG_STM32U5_STM32U5A5XX) || defined(CONFIG_STM32U5_STM32U5A9XX)
+ defined(CONFIG_STM32U5_STM32U5A5XX) || defined(CONFIG_STM32U5_STM32U5A9XX)
/****************************************************************************
* Pre-processor Definitions
diff --git a/arch/arm/src/xmc4/xmc4_lowputc.c b/arch/arm/src/xmc4/xmc4_lowputc.c
index b2f701dd03..dd53a2b655 100644
--- a/arch/arm/src/xmc4/xmc4_lowputc.c
+++ b/arch/arm/src/xmc4/xmc4_lowputc.c
@@ -112,30 +112,30 @@
#define UART_OVERSAMPLING 16
-#if defined(CONFIG_XMC4_USIC0_CHAN0_ISUART)
-#if CONFIG_XMC4_USIC0_CHAN0_TX_BUFFER_SIZE < 2 \
+#if defined(CONFIG_XMC4_USIC0_CHAN0_ISUART)
+#if CONFIG_XMC4_USIC0_CHAN0_TX_BUFFER_SIZE < 2 \
|| CONFIG_XMC4_USIC0_CHAN0_TX_BUFFER_SIZE > 64 \
|| !IS_POWER_OF_2(CONFIG_XMC4_USIC0_CHAN0_TX_BUFFER_SIZE)
# error Tx Buffer Size should be a power of 2 between 2 and 64
#endif
-#if CONFIG_XMC4_USIC0_CHAN0_RX_BUFFER_SIZE < 2 \
- || CONFIG_XMC4_USIC0_CHAN0_RX_BUFFER_SIZE > 64 \
+#if CONFIG_XMC4_USIC0_CHAN0_RX_BUFFER_SIZE < 2 \
+ || CONFIG_XMC4_USIC0_CHAN0_RX_BUFFER_SIZE > 64 \
|| !IS_POWER_OF_2(CONFIG_XMC4_USIC0_CHAN0_RX_BUFFER_SIZE)
# error Rx Buffer Size should be a power of 2 between 2 and 64
#endif
#endif
-#if defined(CONFIG_XMC4_USIC0_CHAN1_ISUART)
-#if CONFIG_XMC4_USIC0_CHAN1_TX_BUFFER_SIZE < 2 \
+#if defined(CONFIG_XMC4_USIC0_CHAN1_ISUART)
+#if CONFIG_XMC4_USIC0_CHAN1_TX_BUFFER_SIZE < 2 \
|| CONFIG_XMC4_USIC0_CHAN1_TX_BUFFER_SIZE > 64 \
|| !IS_POWER_OF_2(CONFIG_XMC4_USIC0_CHAN1_TX_BUFFER_SIZE)
# error Tx Buffer Size should be a power of 2 between 2 and 64
#endif
-#if CONFIG_XMC4_USIC0_CHAN1_RX_BUFFER_SIZE < 2 \
- || CONFIG_XMC4_USIC0_CHAN1_RX_BUFFER_SIZE > 64 \
+#if CONFIG_XMC4_USIC0_CHAN1_RX_BUFFER_SIZE < 2 \
+ || CONFIG_XMC4_USIC0_CHAN1_RX_BUFFER_SIZE > 64 \
|| !IS_POWER_OF_2(CONFIG_XMC4_USIC0_CHAN1_RX_BUFFER_SIZE)
# error Rx Buffer Size should be a power of 2 between 2 and 64
#endif
@@ -144,43 +144,43 @@
#if defined(CONFIG_XMC4_USIC0_CHAN0_ISUART) &&
defined(CONFIG_XMC4_USIC0_CHAN1_ISUART)
#if CONFIG_XMC4_USIC0_CHAN0_TX_BUFFER_SIZE +
CONFIG_XMC4_USIC0_CHAN0_RX_BUFFER_SIZE + \
- CONFIG_XMC4_USIC0_CHAN1_TX_BUFFER_SIZE +
CONFIG_XMC4_USIC0_CHAN1_RX_BUFFER_SIZE > 64
+ CONFIG_XMC4_USIC0_CHAN1_TX_BUFFER_SIZE +
CONFIG_XMC4_USIC0_CHAN1_RX_BUFFER_SIZE > 64
# error The sum of Rx and Tx Buffers sizes should be inferior to 64
#endif
#endif
-#if defined(CONFIG_XMC4_USIC1_CHAN0_ISUART)
-#if CONFIG_XMC4_USIC1_CHAN0_TX_BUFFER_SIZE < 2 \
+#if defined(CONFIG_XMC4_USIC1_CHAN0_ISUART)
+#if CONFIG_XMC4_USIC1_CHAN0_TX_BUFFER_SIZE < 2 \
|| CONFIG_XMC4_USIC1_CHAN0_TX_BUFFER_SIZE > 64 \
|| !IS_POWER_OF_2(CONFIG_XMC4_USIC1_CHAN0_TX_BUFFER_SIZE)
# error Tx Buffer Size should be a power of 2 between 2 and 64
#endif
-#if CONFIG_XMC4_USIC1_CHAN0_RX_BUFFER_SIZE < 2 \
- || CONFIG_XMC4_USIC1_CHAN0_RX_BUFFER_SIZE > 64 \
+#if CONFIG_XMC4_USIC1_CHAN0_RX_BUFFER_SIZE < 2 \
+ || CONFIG_XMC4_USIC1_CHAN0_RX_BUFFER_SIZE > 64 \
|| !IS_POWER_OF_2(CONFIG_XMC4_USIC1_CHAN0_RX_BUFFER_SIZE)
# error Rx Buffer Size should be a power of 2 between 2 and 64
#endif
-#if CONFIG_XMC4_USIC1_CHAN0_TX_BUFFER_SIZE +
CONFIG_XMC4_USIC1_CHAN0_RX_BUFFER_SIZE > 64
+#if CONFIG_XMC4_USIC1_CHAN0_TX_BUFFER_SIZE +
CONFIG_XMC4_USIC1_CHAN0_RX_BUFFER_SIZE > 64
# error The sum of Rx and Tx Buffer sizes should be inferior to 64
#endif
#endif
-#if defined(CONFIG_XMC4_USIC1_CHAN1_ISUART)
-#if CONFIG_XMC4_USIC1_CHAN1_TX_BUFFER_SIZE < 2 \
+#if defined(CONFIG_XMC4_USIC1_CHAN1_ISUART)
+#if CONFIG_XMC4_USIC1_CHAN1_TX_BUFFER_SIZE < 2 \
|| CONFIG_XMC4_USIC1_CHAN1_TX_BUFFER_SIZE > 64 \
|| !IS_POWER_OF_2(CONFIG_XMC4_USIC1_CHAN1_TX_BUFFER_SIZE)
# error Tx Buffer Size should be a power of 2 between 2 and 64
#endif
-#if CONFIG_XMC4_USIC1_CHAN1_RX_BUFFER_SIZE < 2 \
- || CONFIG_XMC4_USIC1_CHAN1_RX_BUFFER_SIZE > 64 \
+#if CONFIG_XMC4_USIC1_CHAN1_RX_BUFFER_SIZE < 2 \
+ || CONFIG_XMC4_USIC1_CHAN1_RX_BUFFER_SIZE > 64 \
|| !IS_POWER_OF_2(CONFIG_XMC4_USIC1_CHAN1_RX_BUFFER_SIZE)
# error Rx Buffer Size should be a power of 2 between 2 and 64
#endif
-#if CONFIG_XMC4_USIC1_CHAN1_TX_BUFFER_SIZE +
CONFIG_XMC4_USIC1_CHAN1_RX_BUFFER_SIZE > 64
+#if CONFIG_XMC4_USIC1_CHAN1_TX_BUFFER_SIZE +
CONFIG_XMC4_USIC1_CHAN1_RX_BUFFER_SIZE > 64
# error The sum of Rx and Tx Buffer sizes should be inferior to 64
#endif
#endif
@@ -192,38 +192,38 @@
#endif
#endif
-#if defined(CONFIG_XMC4_USIC2_CHAN0_ISUART)
-#if CONFIG_XMC4_USIC2_CHAN0_TX_BUFFER_SIZE < 2 \
+#if defined(CONFIG_XMC4_USIC2_CHAN0_ISUART)
+#if CONFIG_XMC4_USIC2_CHAN0_TX_BUFFER_SIZE < 2 \
|| CONFIG_XMC4_USIC2_CHAN0_TX_BUFFER_SIZE > 64 \
|| !IS_POWER_OF_2(CONFIG_XMC4_USIC2_CHAN0_TX_BUFFER_SIZE)
# error Tx Buffer Size should be a power of 2 between 2 and 64
#endif
-#if CONFIG_XMC4_USIC2_CHAN0_RX_BUFFER_SIZE < 2 \
- || CONFIG_XMC4_USIC2_CHAN0_RX_BUFFER_SIZE > 64 \
+#if CONFIG_XMC4_USIC2_CHAN0_RX_BUFFER_SIZE < 2 \
+ || CONFIG_XMC4_USIC2_CHAN0_RX_BUFFER_SIZE > 64 \
|| !IS_POWER_OF_2(CONFIG_XMC4_USIC2_CHAN0_RX_BUFFER_SIZE)
# error Rx Buffer Size should be a power of 2 between 2 and 64
#endif
-#if CONFIG_XMC4_USIC2_CHAN0_TX_BUFFER_SIZE +
CONFIG_XMC4_USIC2_CHAN0_RX_BUFFER_SIZE > 64
+#if CONFIG_XMC4_USIC2_CHAN0_TX_BUFFER_SIZE +
CONFIG_XMC4_USIC2_CHAN0_RX_BUFFER_SIZE > 64
# error The sum of Rx and Tx Buffer sizes should be inferior to 64
#endif
#endif
-#if defined(CONFIG_XMC4_USIC2_CHAN1_ISUART)
-#if CONFIG_XMC4_USIC2_CHAN1_TX_BUFFER_SIZE < 2 \
+#if defined(CONFIG_XMC4_USIC2_CHAN1_ISUART)
+#if CONFIG_XMC4_USIC2_CHAN1_TX_BUFFER_SIZE < 2 \
|| CONFIG_XMC4_USIC2_CHAN1_TX_BUFFER_SIZE > 64 \
|| !IS_POWER_OF_2(CONFIG_XMC4_USIC2_CHAN1_TX_BUFFER_SIZE)
# error Tx Buffer Size should be a power of 2 between 2 and 64
#endif
-#if CONFIG_XMC4_USIC2_CHAN1_RX_BUFFER_SIZE < 2 \
- || CONFIG_XMC4_USIC2_CHAN1_RX_BUFFER_SIZE > 64 \
+#if CONFIG_XMC4_USIC2_CHAN1_RX_BUFFER_SIZE < 2 \
+ || CONFIG_XMC4_USIC2_CHAN1_RX_BUFFER_SIZE > 64 \
|| !IS_POWER_OF_2(CONFIG_XMC4_USIC2_CHAN1_RX_BUFFER_SIZE)
# error Rx Buffer Size should be a power of 2 between 2 and 64
#endif
-#if CONFIG_XMC4_USIC2_CHAN1_TX_BUFFER_SIZE +
CONFIG_XMC4_USIC2_CHAN1_RX_BUFFER_SIZE > 64
+#if CONFIG_XMC4_USIC2_CHAN1_TX_BUFFER_SIZE +
CONFIG_XMC4_USIC2_CHAN1_RX_BUFFER_SIZE > 64
# error The sum of Rx and Tx Buffer sizes should be inferior to 64
#endif
#endif
diff --git a/arch/arm64/include/rk3399/chip.h b/arch/arm64/include/rk3399/chip.h
index 26530b6f38..b04d2b8ea6 100644
--- a/arch/arm64/include/rk3399/chip.h
+++ b/arch/arm64/include/rk3399/chip.h
@@ -42,7 +42,7 @@
/* Rockchip A64 Generic Interrupt Controller v2: Distributor and Redist */
#define CONFIG_GICD_BASE 0xfee00000
-#define CONFIG_GICR_BASE 0xfef00000
+#define CONFIG_GICR_BASE 0xfef00000
#define CONFIG_GICR_OFFSET 0x20000
/* Rockchip RK3399 Memory Map: RAM and Device I/O */
diff --git a/arch/arm64/include/zynq-mpsoc/chip.h
b/arch/arm64/include/zynq-mpsoc/chip.h
index 7305d7f909..f8dedb16aa 100644
--- a/arch/arm64/include/zynq-mpsoc/chip.h
+++ b/arch/arm64/include/zynq-mpsoc/chip.h
@@ -42,7 +42,7 @@
/* XilinX ZYNQ_MPSOC Generic Interrupt Controller v2: Distributor & Redist */
#define CONFIG_GICD_BASE 0xf9010000
-#define CONFIG_GICR_BASE 0xf9020000
+#define CONFIG_GICR_BASE 0xf9020000
#define CONFIG_GICR_OFFSET 0x20000
/* XilinX ZYNQ_MPSOC Memory Map: RAM and Device I/O */
diff --git a/arch/arm64/src/imx9/hardware/imx9_enet.h
b/arch/arm64/src/imx9/hardware/imx9_enet.h
index 10613cc7ae..4f7050527a 100644
--- a/arch/arm64/src/imx9/hardware/imx9_enet.h
+++ b/arch/arm64/src/imx9/hardware/imx9_enet.h
@@ -160,7 +160,7 @@
#define ENET_RXB2 (1 << 4) /* Receive buffer interrupt,
class 2 */
#define ENET_RXF2 (1 << 5) /* Receive frame interrupt,
class 2 */
#define ENET_TXB2 (1 << 6) /* Transmit buffer interrupt,
class 2 */
-#define ENET_TXF2 (1 << 7) /* Transmit frame interrupt,
class 2 */
+#define ENET_TXF2 (1 << 7) /* Transmit frame interrupt,
class 2 */
#define ENET_RXFLUSH_0 (1 << 12) /* RX DMA Ring 0 flush
indication */
#define ENET_RXFLUSH_1 (1 << 13) /* RX DMA Ring 1 flush
indication */
#define ENET_RXFLUSH_2 (1 << 14) /* RX DMA Ring 2 flush
indication */
diff --git a/arch/risc-v/src/hpm6000/hardware/hpm6300/hpm6300_sysctl.h
b/arch/risc-v/src/hpm6000/hardware/hpm6300/hpm6300_sysctl.h
index 3b9c46d6cd..7003d4f35e 100644
--- a/arch/risc-v/src/hpm6000/hardware/hpm6300/hpm6300_sysctl.h
+++ b/arch/risc-v/src/hpm6000/hardware/hpm6300/hpm6300_sysctl.h
@@ -286,7 +286,7 @@
#define SYSCTL_RETENTION_LINK_MASK (0xffU <<
SYSCTL_RETENTION_LINK_SHIFT)
# define SYSCTL_RETENTION_LINK_SOC_RAM (0 <<
SYSCTL_RETENTION_LINK_SHIFT)
# define SYSCTL_RETENTION_LINK_PERIPH_REG (1 <<
SYSCTL_RETENTION_LINK_SHIFT)
-# define SYSCTL_RETENTION_LINK_CPU0_RAM (2 <<
SYSCTL_RETENTION_LINK_SHIFT)
+# define SYSCTL_RETENTION_LINK_CPU0_RAM (2 <<
SYSCTL_RETENTION_LINK_SHIFT)
# define SYSCTL_RETENTION_LINK_CPU0_REG (3 <<
SYSCTL_RETENTION_LINK_SHIFT)
# define SYSCTL_RETENTION_LINK_XTAL (4 <<
SYSCTL_RETENTION_LINK_SHIFT)
# define SYSCTL_RETENTION_LINK_PLL0 (5 <<
SYSCTL_RETENTION_LINK_SHIFT)
diff --git a/boards/arm/at32/at32f437-mini/src/at32_at24.c
b/boards/arm/at32/at32f437-mini/src/at32_at24.c
index ada3ce12d7..fab6b34d2d 100644
--- a/boards/arm/at32/at32f437-mini/src/at32_at24.c
+++ b/boards/arm/at32/at32f437-mini/src/at32_at24.c
@@ -107,7 +107,7 @@ int at32_at24_automount(int minor)
ferr("ERROR: Failed to mount the NXFFS volume: %d\n", ret);
return ret;
}
-#else
+#else
/* And use the FTL layer to wrap the MTD driver as a block driver */
finfo("Initialize the FTL layer to create /dev/mtdblock%d\n",
diff --git a/boards/arm/stm32/nucleo-f429zi/src/stm32_appinitialize.c
b/boards/arm/stm32/nucleo-f429zi/src/stm32_appinitialize.c
index aa33e7355a..d697b6083b 100644
--- a/boards/arm/stm32/nucleo-f429zi/src/stm32_appinitialize.c
+++ b/boards/arm/stm32/nucleo-f429zi/src/stm32_appinitialize.c
@@ -43,7 +43,7 @@
#if defined(CONFIG_I2C) && defined(CONFIG_SYSTEM_I2CTOOL)
# include "stm32_i2c.h"
-#endif
+#endif
/****************************************************************************
* Private Functions
diff --git a/boards/arm/stm32h5/nucleo-h563zi/include/board.h
b/boards/arm/stm32h5/nucleo-h563zi/include/board.h
index e9e1805065..e077dec0eb 100644
--- a/boards/arm/stm32h5/nucleo-h563zi/include/board.h
+++ b/boards/arm/stm32h5/nucleo-h563zi/include/board.h
@@ -152,7 +152,7 @@
#if defined(CONFIG_STM32H5_USBFS) || defined(CONFIG_STM32H5_RNG)
# define STM32H5_USE_CLK48 1
-# define STM32H5_CLKUSB_SEL RCC_CCIPR4_USBSEL_HSI48KERCK
+# define STM32H5_CLKUSB_SEL RCC_CCIPR4_USBSEL_HSI48KERCK
# define STM32H5_HSI48_SYNCSRC SYNCSRC_NONE
#endif
diff --git a/boards/xtensa/esp32s3/esp32s3-devkit/include/board.h
b/boards/xtensa/esp32s3/esp32s3-devkit/include/board.h
index b00dc167fa..f28c134287 100644
--- a/boards/xtensa/esp32s3/esp32s3-devkit/include/board.h
+++ b/boards/xtensa/esp32s3/esp32s3-devkit/include/board.h
@@ -55,7 +55,7 @@
#ifdef CONFIG_NET_LAN9250
-# define LAN9250_SPI 2
+# define LAN9250_SPI 2
/* LAN9250 IRQ pin */
diff --git a/fs/mnemofs/mnemofs_ctz.c b/fs/mnemofs/mnemofs_ctz.c
index 2c6f7bdceb..ec16bd748f 100644
--- a/fs/mnemofs/mnemofs_ctz.c
+++ b/fs/mnemofs/mnemofs_ctz.c
@@ -99,7 +99,7 @@
#include <debug.h>
#include <fcntl.h>
#include <nuttx/kmalloc.h>
-#include <math.h>
+#include <math.h>
#include <sys/param.h>
#include <sys/stat.h>
diff --git a/include/nuttx/lin.h b/include/nuttx/lin.h
index ffe4a5df43..51bd3be173 100644
--- a/include/nuttx/lin.h
+++ b/include/nuttx/lin.h
@@ -113,7 +113,7 @@
#define LIN_ERR_TX_UNSPEC 0x00 /* Unspecified error */
#define LIN_ERR_TX_BREAK_TMO (1 << 0) /* Bit 0: Master send break field,
but detect break event timeout */
-#define LIN_ERR_TX_SYNC_TMO (1 << 1) /* Bit 1: Master send sync timeout
(receive back timeout) */
+#define LIN_ERR_TX_SYNC_TMO (1 << 1) /* Bit 1: Master send sync timeout
(receive back timeout) */
#define LIN_ERR_TX_PID_TMO (1 << 2) /* Bit 2: Master send pid timeout
(receive back timeout) */
#define LIN_ERR_TX_DATA_TMO (1 << 3) /* Bit 3: Master/slave send data
timeout (receive back timeout) */
#define LIN_ERR_TX_CHECKSUM_TMO (1 << 4) /* Bit 4: Master/slave send
checksum timeout(receive back timeout) */
diff --git a/include/nuttx/timers/pwm.h b/include/nuttx/timers/pwm.h
index 76cbc3a659..7a124c655c 100644
--- a/include/nuttx/timers/pwm.h
+++ b/include/nuttx/timers/pwm.h
@@ -136,7 +136,7 @@
* the disabled channel's output state.
*/
-#define PWM_DCPOL_NDEF 0 /* Not defined, the default output state
is arch dependant */
+#define PWM_DCPOL_NDEF 0 /* Not defined, the default output state
is arch dependant */
#define PWM_DCPOL_LOW 1 /* Logical zero */
#define PWM_DCPOL_HIGH 2 /* Logical one */
