This is an automated email from the ASF dual-hosted git repository.
github-bot pushed a commit to branch asf-site
in repository https://gitbox.apache.org/repos/asf/nuttx-website.git
The following commit(s) were added to refs/heads/asf-site by this push:
new 24a92d676d Publishing web: 405a7126bab3fbbeef1bb95fabd1561c86029fc1
docs: 2d069231c54605ec0907704ae758fcc3acb7cf6f
24a92d676d is described below
commit 24a92d676d550566e5cbc9dd80a3c676b451d5d0
Author: raiden00pl <raide...@railab.me>
AuthorDate: Fri Feb 21 00:27:28 2025 +0000
Publishing web: 405a7126bab3fbbeef1bb95fabd1561c86029fc1 docs:
2d069231c54605ec0907704ae758fcc3acb7cf6f
---
content/docs/10.0.0/index.html | 2 +-
content/docs/10.0.1/index.html | 2 +-
content/docs/10.1.0/index.html | 2 +-
content/docs/10.2.0/index.html | 2 +-
content/docs/10.3.0/index.html | 2 +-
content/docs/11.0.0/index.html | 2 +-
content/docs/12.0.0/index.html | 2 +-
content/docs/12.0.0/searchindex.js | 2 +-
content/docs/12.1.0/index.html | 2 +-
content/docs/12.1.0/searchindex.js | 2 +-
content/docs/12.2.0/index.html | 2 +-
content/docs/12.2.0/searchindex.js | 2 +-
content/docs/12.2.1/index.html | 2 +-
content/docs/12.2.1/searchindex.js | 2 +-
content/docs/12.3.0/index.html | 2 +-
content/docs/12.3.0/searchindex.js | 2 +-
content/docs/12.4.0/index.html | 2 +-
content/docs/12.4.0/searchindex.js | 2 +-
content/docs/12.5.0/index.html | 2 +-
content/docs/12.5.0/searchindex.js | 2 +-
content/docs/12.5.1/index.html | 2 +-
content/docs/12.5.1/searchindex.js | 2 +-
content/docs/12.6.0/index.html | 2 +-
content/docs/12.7.0/index.html | 2 +-
content/docs/12.7.0/searchindex.js | 2 +-
content/docs/12.8.0/index.html | 2 +-
content/docs/12.8.0/searchindex.js | 2 +-
.../latest/_images/esp32s3-audio-config-file.png | Bin 0 -> 21276 bytes
content/docs/latest/_images/esp32s3_lcd_ev.png | Bin 0 -> 338946 bytes
.../platforms/risc-v/esp32c6/index.rst.txt | 4 +-
.../platforms/risc-v/esp32h2/index.rst.txt | 4 +-
.../esp32s3/boards/esp32s3-lcd-ev/index.rst.txt | 156 ++++++++++++++
content/docs/latest/index.html | 2 +-
content/docs/latest/objects.inv | Bin 138633 -> 138802 bytes
content/docs/latest/platforms/index.html | 1 +
.../latest/platforms/risc-v/esp32c6/index.html | 4 +-
.../latest/platforms/risc-v/esp32h2/index.html | 4 +-
.../esp32s3/boards/esp32s3-devkit/index.html | 1 +
.../xtensa/esp32s3/boards/esp32s3-eye/index.html | 1 +
.../esp32s3/boards/esp32s3-korvo-2/index.html | 5 +-
.../{esp32s3-eye => esp32s3-lcd-ev}/index.html | 225 +++++++++++----------
.../esp32s3/boards/esp32s3-lhcbit/index.html | 5 +-
.../latest/platforms/xtensa/esp32s3/index.html | 2 +
content/docs/latest/searchindex.js | 2 +-
content/feed.xml | 4 +-
45 files changed, 329 insertions(+), 145 deletions(-)
diff --git a/content/docs/10.0.0/index.html b/content/docs/10.0.0/index.html
index 7746fbc2a5..73ca1d0c9f 100644
--- a/content/docs/10.0.0/index.html
+++ b/content/docs/10.0.0/index.html
@@ -207,7 +207,7 @@ by following these <a class="reference internal"
href="contributing/documentatio
<div class="section" id="nuttx-documentation">
<h1>NuttX Documentation<a class="headerlink" href="#nuttx-documentation"
title="Permalink to this headline">¶</a></h1>
<p>NuttX is a real-time operating system (RTOS) with an emphasis on standards
compliance and small footprint. Scalable from 8-bit to 32-bit microcontroller
environments, the primary governing standards in NuttX are Posix and ANSI
standards. Additional standard APIs from Unix and other common RTOS’s (such as
VxWorks) are adopted for functionality not available under these standards, or
for functionality that is not appropriate for deeply-embedded environments
(such as fork()).</p>
-<p>Last Updated: 20 February 25 at 00:13</p>
+<p>Last Updated: 21 February 25 at 00:13</p>
<div class="toctree-wrapper compound">
<p class="caption"><span class="caption-text">Table of Contents</span></p>
<ul class="current">
diff --git a/content/docs/10.0.1/index.html b/content/docs/10.0.1/index.html
index f71e842dfc..69bcca04b8 100644
--- a/content/docs/10.0.1/index.html
+++ b/content/docs/10.0.1/index.html
@@ -241,7 +241,7 @@ by following these <a class="reference internal"
href="contributing/documentatio
<div class="section" id="nuttx-documentation">
<h1>NuttX Documentation<a class="headerlink" href="#nuttx-documentation"
title="Permalink to this headline">¶</a></h1>
<p>NuttX is a real-time operating system (RTOS) with an emphasis on standards
compliance and small footprint. Scalable from 8-bit to 32-bit microcontroller
environments, the primary governing standards in NuttX are Posix and ANSI
standards. Additional standard APIs from Unix and other common RTOS’s (such as
VxWorks) are adopted for functionality not available under these standards, or
for functionality that is not appropriate for deeply-embedded environments
(such as fork()).</p>
-<p>Last Updated: 20 February 25 at 00:13</p>
+<p>Last Updated: 21 February 25 at 00:13</p>
<div class="toctree-wrapper compound">
<p class="caption"><span class="caption-text">Table of Contents</span></p>
<ul class="current">
diff --git a/content/docs/10.1.0/index.html b/content/docs/10.1.0/index.html
index 6198fcc448..a2a0aa39df 100644
--- a/content/docs/10.1.0/index.html
+++ b/content/docs/10.1.0/index.html
@@ -241,7 +241,7 @@ by following these <a class="reference internal"
href="contributing/documentatio
<div class="section" id="nuttx-documentation">
<h1>NuttX Documentation<a class="headerlink" href="#nuttx-documentation"
title="Permalink to this headline">¶</a></h1>
<p>NuttX is a real-time operating system (RTOS) with an emphasis on standards
compliance and small footprint. Scalable from 8-bit to 64-bit microcontroller
environments, the primary governing standards in NuttX are POSIX and ANSI
standards. Additional standard APIs from Unix and other common RTOS’s (such as
VxWorks) are adopted for functionality not available under these standards, or
for functionality that is not appropriate for deeply-embedded environments
(such as fork()).</p>
-<p>Last Updated: 20 February 25 at 00:13</p>
+<p>Last Updated: 21 February 25 at 00:13</p>
<div class="toctree-wrapper compound">
<p class="caption"><span class="caption-text">Table of Contents</span></p>
<ul class="current">
diff --git a/content/docs/10.2.0/index.html b/content/docs/10.2.0/index.html
index cb2cdc6481..d42d909924 100644
--- a/content/docs/10.2.0/index.html
+++ b/content/docs/10.2.0/index.html
@@ -242,7 +242,7 @@ by following these <a class="reference internal"
href="contributing/documentatio
<div class="section" id="nuttx-documentation">
<h1>NuttX Documentation<a class="headerlink" href="#nuttx-documentation"
title="Permalink to this headline">¶</a></h1>
<p>NuttX is a real-time operating system (RTOS) with an emphasis on standards
compliance and small footprint. Scalable from 8-bit to 64-bit microcontroller
environments, the primary governing standards in NuttX are POSIX and ANSI
standards. Additional standard APIs from Unix and other common RTOS’s (such as
VxWorks) are adopted for functionality not available under these standards, or
for functionality that is not appropriate for deeply-embedded environments
(such as fork()).</p>
-<p>Last Updated: 20 February 25 at 00:14</p>
+<p>Last Updated: 21 February 25 at 00:13</p>
<div class="toctree-wrapper compound">
<p class="caption"><span class="caption-text">Table of Contents</span></p>
<ul class="current">
diff --git a/content/docs/10.3.0/index.html b/content/docs/10.3.0/index.html
index cb2cdc6481..3dc229211e 100644
--- a/content/docs/10.3.0/index.html
+++ b/content/docs/10.3.0/index.html
@@ -242,7 +242,7 @@ by following these <a class="reference internal"
href="contributing/documentatio
<div class="section" id="nuttx-documentation">
<h1>NuttX Documentation<a class="headerlink" href="#nuttx-documentation"
title="Permalink to this headline">¶</a></h1>
<p>NuttX is a real-time operating system (RTOS) with an emphasis on standards
compliance and small footprint. Scalable from 8-bit to 64-bit microcontroller
environments, the primary governing standards in NuttX are POSIX and ANSI
standards. Additional standard APIs from Unix and other common RTOS’s (such as
VxWorks) are adopted for functionality not available under these standards, or
for functionality that is not appropriate for deeply-embedded environments
(such as fork()).</p>
-<p>Last Updated: 20 February 25 at 00:14</p>
+<p>Last Updated: 21 February 25 at 00:14</p>
<div class="toctree-wrapper compound">
<p class="caption"><span class="caption-text">Table of Contents</span></p>
<ul class="current">
diff --git a/content/docs/11.0.0/index.html b/content/docs/11.0.0/index.html
index cb2cdc6481..3dc229211e 100644
--- a/content/docs/11.0.0/index.html
+++ b/content/docs/11.0.0/index.html
@@ -242,7 +242,7 @@ by following these <a class="reference internal"
href="contributing/documentatio
<div class="section" id="nuttx-documentation">
<h1>NuttX Documentation<a class="headerlink" href="#nuttx-documentation"
title="Permalink to this headline">¶</a></h1>
<p>NuttX is a real-time operating system (RTOS) with an emphasis on standards
compliance and small footprint. Scalable from 8-bit to 64-bit microcontroller
environments, the primary governing standards in NuttX are POSIX and ANSI
standards. Additional standard APIs from Unix and other common RTOS’s (such as
VxWorks) are adopted for functionality not available under these standards, or
for functionality that is not appropriate for deeply-embedded environments
(such as fork()).</p>
-<p>Last Updated: 20 February 25 at 00:14</p>
+<p>Last Updated: 21 February 25 at 00:14</p>
<div class="toctree-wrapper compound">
<p class="caption"><span class="caption-text">Table of Contents</span></p>
<ul class="current">
diff --git a/content/docs/12.0.0/index.html b/content/docs/12.0.0/index.html
index 4aafc4aca7..479d7dea59 100644
--- a/content/docs/12.0.0/index.html
+++ b/content/docs/12.0.0/index.html
@@ -167,7 +167,7 @@ by following these <a class="reference internal"
href="contributing/documentatio
<section id="nuttx-documentation">
<h1>NuttX Documentation<a class="headerlink" href="#nuttx-documentation"
title="Permalink to this headline"></a></h1>
<p>NuttX is a real-time operating system (RTOS) with an emphasis on standards
compliance and small footprint. Scalable from 8-bit to 64-bit microcontroller
environments, the primary governing standards in NuttX are POSIX and ANSI
standards. Additional standard APIs from Unix and other common RTOS’s (such as
VxWorks) are adopted for functionality not available under these standards, or
for functionality that is not appropriate for deeply-embedded environments
(such as fork()).</p>
-<p>Last Updated: 20 February 25 at 00:14</p>
+<p>Last Updated: 21 February 25 at 00:14</p>
<div class="toctree-wrapper compound">
<p class="caption" role="heading"><span class="caption-text">Table of
Contents</span></p>
<ul class="current">
diff --git a/content/docs/12.0.0/searchindex.js
b/content/docs/12.0.0/searchindex.js
index e2a360d119..7ebda063a6 100644
--- a/content/docs/12.0.0/searchindex.js
+++ b/content/docs/12.0.0/searchindex.js
@@ -1 +1 @@
-Search.setIndex({docnames:["applications/index","applications/nsh/builtin","applications/nsh/commands","applications/nsh/config","applications/nsh/customizing","applications/nsh/index","applications/nsh/installation","applications/nsh/login","applications/nsh/nsh","components/binfmt","components/drivers/block/index","components/drivers/character/analog","components/drivers/character/can","components/drivers/character/foc","components/drivers/character/index","components/drivers/character
[...]
\ No newline at end of file
+Search.setIndex({docnames:["applications/index","applications/nsh/builtin","applications/nsh/commands","applications/nsh/config","applications/nsh/customizing","applications/nsh/index","applications/nsh/installation","applications/nsh/login","applications/nsh/nsh","components/binfmt","components/drivers/block/index","components/drivers/character/analog","components/drivers/character/can","components/drivers/character/foc","components/drivers/character/index","components/drivers/character
[...]
\ No newline at end of file
diff --git a/content/docs/12.1.0/index.html b/content/docs/12.1.0/index.html
index 3c4ecc3bb9..b3c7c63f93 100644
--- a/content/docs/12.1.0/index.html
+++ b/content/docs/12.1.0/index.html
@@ -167,7 +167,7 @@ by following these <a class="reference internal"
href="contributing/documentatio
<section id="nuttx-documentation">
<h1>NuttX Documentation<a class="headerlink" href="#nuttx-documentation"
title="Permalink to this headline"></a></h1>
<p>NuttX is a real-time operating system (RTOS) with an emphasis on standards
compliance and small footprint. Scalable from 8-bit to 64-bit microcontroller
environments, the primary governing standards in NuttX are POSIX and ANSI
standards. Additional standard APIs from Unix and other common RTOS’s (such as
VxWorks) are adopted for functionality not available under these standards, or
for functionality that is not appropriate for deeply-embedded environments
(such as fork()).</p>
-<p>Last Updated: 20 February 25 at 00:15</p>
+<p>Last Updated: 21 February 25 at 00:15</p>
<div class="toctree-wrapper compound">
<p class="caption" role="heading"><span class="caption-text">Table of
Contents</span></p>
<ul class="current">
diff --git a/content/docs/12.1.0/searchindex.js
b/content/docs/12.1.0/searchindex.js
index 7b839c6e17..809653f576 100644
--- a/content/docs/12.1.0/searchindex.js
+++ b/content/docs/12.1.0/searchindex.js
@@ -1 +1 @@
-Search.setIndex({docnames:["applications/index","applications/nsh/builtin","applications/nsh/commands","applications/nsh/config","applications/nsh/customizing","applications/nsh/index","applications/nsh/installation","applications/nsh/login","applications/nsh/nsh","components/binfmt","components/drivers/block/index","components/drivers/character/analog","components/drivers/character/can","components/drivers/character/foc","components/drivers/character/index","components/drivers/character
[...]
\ No newline at end of file
+Search.setIndex({docnames:["applications/index","applications/nsh/builtin","applications/nsh/commands","applications/nsh/config","applications/nsh/customizing","applications/nsh/index","applications/nsh/installation","applications/nsh/login","applications/nsh/nsh","components/binfmt","components/drivers/block/index","components/drivers/character/analog","components/drivers/character/can","components/drivers/character/foc","components/drivers/character/index","components/drivers/character
[...]
\ No newline at end of file
diff --git a/content/docs/12.2.0/index.html b/content/docs/12.2.0/index.html
index a9536f2e30..f4a0076abf 100644
--- a/content/docs/12.2.0/index.html
+++ b/content/docs/12.2.0/index.html
@@ -168,7 +168,7 @@ by following these <a class="reference internal"
href="contributing/documentatio
<section id="nuttx-documentation">
<h1>NuttX Documentation<a class="headerlink" href="#nuttx-documentation"
title="Permalink to this heading"></a></h1>
<p>NuttX is a real-time operating system (RTOS) with an emphasis on standards
compliance and small footprint. Scalable from 8-bit to 64-bit microcontroller
environments, the primary governing standards in NuttX are POSIX and ANSI
standards. Additional standard APIs from Unix and other common RTOS’s (such as
VxWorks) are adopted for functionality not available under these standards, or
for functionality that is not appropriate for deeply-embedded environments
(such as fork()).</p>
-<p>Last Updated: 20 February 25 at 00:15</p>
+<p>Last Updated: 21 February 25 at 00:15</p>
<div class="toctree-wrapper compound">
<p class="caption" role="heading"><span class="caption-text">Table of
Contents</span></p>
<ul class="current">
diff --git a/content/docs/12.2.0/searchindex.js
b/content/docs/12.2.0/searchindex.js
index 5178cfe77a..76e8b2e9c7 100644
--- a/content/docs/12.2.0/searchindex.js
+++ b/content/docs/12.2.0/searchindex.js
@@ -1 +1 @@
-Search.setIndex({"docnames": ["applications/index",
"applications/nsh/builtin", "applications/nsh/commands",
"applications/nsh/config", "applications/nsh/customizing",
"applications/nsh/index", "applications/nsh/installation",
"applications/nsh/login", "applications/nsh/nsh", "applications/nxdiag/config",
"applications/nxdiag/index", "applications/wapi/commands",
"applications/wapi/index", "applications/wapi/wireless", "components/binfmt",
"components/drivers/block/index", "components/dr [...]
\ No newline at end of file
+Search.setIndex({"docnames": ["applications/index",
"applications/nsh/builtin", "applications/nsh/commands",
"applications/nsh/config", "applications/nsh/customizing",
"applications/nsh/index", "applications/nsh/installation",
"applications/nsh/login", "applications/nsh/nsh", "applications/nxdiag/config",
"applications/nxdiag/index", "applications/wapi/commands",
"applications/wapi/index", "applications/wapi/wireless", "components/binfmt",
"components/drivers/block/index", "components/dr [...]
\ No newline at end of file
diff --git a/content/docs/12.2.1/index.html b/content/docs/12.2.1/index.html
index 5b8f5fa1ff..f4a0076abf 100644
--- a/content/docs/12.2.1/index.html
+++ b/content/docs/12.2.1/index.html
@@ -168,7 +168,7 @@ by following these <a class="reference internal"
href="contributing/documentatio
<section id="nuttx-documentation">
<h1>NuttX Documentation<a class="headerlink" href="#nuttx-documentation"
title="Permalink to this heading"></a></h1>
<p>NuttX is a real-time operating system (RTOS) with an emphasis on standards
compliance and small footprint. Scalable from 8-bit to 64-bit microcontroller
environments, the primary governing standards in NuttX are POSIX and ANSI
standards. Additional standard APIs from Unix and other common RTOS’s (such as
VxWorks) are adopted for functionality not available under these standards, or
for functionality that is not appropriate for deeply-embedded environments
(such as fork()).</p>
-<p>Last Updated: 20 February 25 at 00:16</p>
+<p>Last Updated: 21 February 25 at 00:15</p>
<div class="toctree-wrapper compound">
<p class="caption" role="heading"><span class="caption-text">Table of
Contents</span></p>
<ul class="current">
diff --git a/content/docs/12.2.1/searchindex.js
b/content/docs/12.2.1/searchindex.js
index 075a300f40..1735eb9296 100644
--- a/content/docs/12.2.1/searchindex.js
+++ b/content/docs/12.2.1/searchindex.js
@@ -1 +1 @@
-Search.setIndex({"docnames": ["applications/index",
"applications/nsh/builtin", "applications/nsh/commands",
"applications/nsh/config", "applications/nsh/customizing",
"applications/nsh/index", "applications/nsh/installation",
"applications/nsh/login", "applications/nsh/nsh", "applications/nxdiag/config",
"applications/nxdiag/index", "applications/wapi/commands",
"applications/wapi/index", "applications/wapi/wireless", "components/binfmt",
"components/drivers/block/index", "components/dr [...]
\ No newline at end of file
+Search.setIndex({"docnames": ["applications/index",
"applications/nsh/builtin", "applications/nsh/commands",
"applications/nsh/config", "applications/nsh/customizing",
"applications/nsh/index", "applications/nsh/installation",
"applications/nsh/login", "applications/nsh/nsh", "applications/nxdiag/config",
"applications/nxdiag/index", "applications/wapi/commands",
"applications/wapi/index", "applications/wapi/wireless", "components/binfmt",
"components/drivers/block/index", "components/dr [...]
\ No newline at end of file
diff --git a/content/docs/12.3.0/index.html b/content/docs/12.3.0/index.html
index 75a4fb75df..64189fb045 100644
--- a/content/docs/12.3.0/index.html
+++ b/content/docs/12.3.0/index.html
@@ -168,7 +168,7 @@ by following these <a class="reference internal"
href="contributing/documentatio
<section id="nuttx-documentation">
<h1>NuttX Documentation<a class="headerlink" href="#nuttx-documentation"
title="Permalink to this heading"></a></h1>
<p>NuttX is a real-time operating system (RTOS) with an emphasis on standards
compliance and small footprint. Scalable from 8-bit to 64-bit microcontroller
environments, the primary governing standards in NuttX are POSIX and ANSI
standards. Additional standard APIs from Unix and other common RTOS’s (such as
VxWorks) are adopted for functionality not available under these standards, or
for functionality that is not appropriate for deeply-embedded environments
(such as fork()).</p>
-<p>Last Updated: 20 February 25 at 00:16</p>
+<p>Last Updated: 21 February 25 at 00:16</p>
<div class="toctree-wrapper compound">
<p class="caption" role="heading"><span class="caption-text">Table of
Contents</span></p>
<ul class="current">
diff --git a/content/docs/12.3.0/searchindex.js
b/content/docs/12.3.0/searchindex.js
index 198bbfe654..b72b71a73d 100644
--- a/content/docs/12.3.0/searchindex.js
+++ b/content/docs/12.3.0/searchindex.js
@@ -1 +1 @@
-Search.setIndex({"docnames": ["applications/index",
"applications/nsh/builtin", "applications/nsh/commands",
"applications/nsh/config", "applications/nsh/customizing",
"applications/nsh/index", "applications/nsh/installation",
"applications/nsh/login", "applications/nsh/nsh", "applications/nxdiag/config",
"applications/nxdiag/index", "applications/wapi/commands",
"applications/wapi/index", "applications/wapi/wireless", "components/binfmt",
"components/drivers/block/index", "components/dr [...]
\ No newline at end of file
+Search.setIndex({"docnames": ["applications/index",
"applications/nsh/builtin", "applications/nsh/commands",
"applications/nsh/config", "applications/nsh/customizing",
"applications/nsh/index", "applications/nsh/installation",
"applications/nsh/login", "applications/nsh/nsh", "applications/nxdiag/config",
"applications/nxdiag/index", "applications/wapi/commands",
"applications/wapi/index", "applications/wapi/wireless", "components/binfmt",
"components/drivers/block/index", "components/dr [...]
\ No newline at end of file
diff --git a/content/docs/12.4.0/index.html b/content/docs/12.4.0/index.html
index df1dcb0bb6..d844699818 100644
--- a/content/docs/12.4.0/index.html
+++ b/content/docs/12.4.0/index.html
@@ -175,7 +175,7 @@ standards. Additional standard APIs from Unix and other
common RTOS’s (such as
VxWorks) are adopted for functionality not available under these standards, or
for functionality that is not appropriate for deeply-embedded environments
(such
as fork()).</p>
-<p>Last Updated: 20 February 25 at 00:17</p>
+<p>Last Updated: 21 February 25 at 00:16</p>
<div class="toctree-wrapper compound">
<p class="caption" role="heading"><span class="caption-text">Table of
Contents</span></p>
<ul class="current">
diff --git a/content/docs/12.4.0/searchindex.js
b/content/docs/12.4.0/searchindex.js
index b8c4227da5..a4535f1c91 100644
--- a/content/docs/12.4.0/searchindex.js
+++ b/content/docs/12.4.0/searchindex.js
@@ -1 +1 @@
-Search.setIndex({"docnames": ["applications/audioutils/fmsynt/index",
"applications/audioutils/index", "applications/audioutils/mml_parser/index",
"applications/audioutils/nxaudio/index",
"applications/benchmarks/coremark/index", "applications/benchmarks/index",
"applications/boot/index", "applications/boot/mcuboot/index",
"applications/boot/miniboot/index", "applications/canutils/candump/index",
"applications/canutils/canlib/index", "applications/canutils/cansend/index",
"applications/c [...]
\ No newline at end of file
+Search.setIndex({"docnames": ["applications/audioutils/fmsynt/index",
"applications/audioutils/index", "applications/audioutils/mml_parser/index",
"applications/audioutils/nxaudio/index",
"applications/benchmarks/coremark/index", "applications/benchmarks/index",
"applications/boot/index", "applications/boot/mcuboot/index",
"applications/boot/miniboot/index", "applications/canutils/candump/index",
"applications/canutils/canlib/index", "applications/canutils/cansend/index",
"applications/c [...]
\ No newline at end of file
diff --git a/content/docs/12.5.0/index.html b/content/docs/12.5.0/index.html
index 89661b2a42..cb4c571c66 100644
--- a/content/docs/12.5.0/index.html
+++ b/content/docs/12.5.0/index.html
@@ -175,7 +175,7 @@ standards. Additional standard APIs from Unix and other
common RTOS’s (such as
VxWorks) are adopted for functionality not available under these standards, or
for functionality that is not appropriate for deeply-embedded environments
(such
as fork()).</p>
-<p>Last Updated: 20 February 25 at 00:18</p>
+<p>Last Updated: 21 February 25 at 00:18</p>
<div class="toctree-wrapper compound">
<p class="caption" role="heading"><span class="caption-text">Table of
Contents</span></p>
<ul class="current">
diff --git a/content/docs/12.5.0/searchindex.js
b/content/docs/12.5.0/searchindex.js
index e07e0faf30..4a62b0a362 100644
--- a/content/docs/12.5.0/searchindex.js
+++ b/content/docs/12.5.0/searchindex.js
@@ -1 +1 @@
-Search.setIndex({"docnames": ["applications/audioutils/fmsynt/index",
"applications/audioutils/index", "applications/audioutils/mml_parser/index",
"applications/audioutils/nxaudio/index",
"applications/benchmarks/coremark/index", "applications/benchmarks/index",
"applications/boot/index", "applications/boot/mcuboot/index",
"applications/boot/miniboot/index", "applications/canutils/candump/index",
"applications/canutils/canlib/index", "applications/canutils/cansend/index",
"applications/c [...]
\ No newline at end of file
+Search.setIndex({"docnames": ["applications/audioutils/fmsynt/index",
"applications/audioutils/index", "applications/audioutils/mml_parser/index",
"applications/audioutils/nxaudio/index",
"applications/benchmarks/coremark/index", "applications/benchmarks/index",
"applications/boot/index", "applications/boot/mcuboot/index",
"applications/boot/miniboot/index", "applications/canutils/candump/index",
"applications/canutils/canlib/index", "applications/canutils/cansend/index",
"applications/c [...]
\ No newline at end of file
diff --git a/content/docs/12.5.1/index.html b/content/docs/12.5.1/index.html
index a5043b557d..b6d78b9c5c 100644
--- a/content/docs/12.5.1/index.html
+++ b/content/docs/12.5.1/index.html
@@ -175,7 +175,7 @@ standards. Additional standard APIs from Unix and other
common RTOS’s (such as
VxWorks) are adopted for functionality not available under these standards, or
for functionality that is not appropriate for deeply-embedded environments
(such
as fork()).</p>
-<p>Last Updated: 20 February 25 at 00:20</p>
+<p>Last Updated: 21 February 25 at 00:19</p>
<div class="toctree-wrapper compound">
<p class="caption" role="heading"><span class="caption-text">Table of
Contents</span></p>
<ul class="current">
diff --git a/content/docs/12.5.1/searchindex.js
b/content/docs/12.5.1/searchindex.js
index 4a010c2092..5bdd572a86 100644
--- a/content/docs/12.5.1/searchindex.js
+++ b/content/docs/12.5.1/searchindex.js
@@ -1 +1 @@
-Search.setIndex({"docnames": ["applications/audioutils/fmsynt/index",
"applications/audioutils/index", "applications/audioutils/mml_parser/index",
"applications/audioutils/nxaudio/index",
"applications/benchmarks/coremark/index", "applications/benchmarks/index",
"applications/boot/index", "applications/boot/mcuboot/index",
"applications/boot/miniboot/index", "applications/canutils/candump/index",
"applications/canutils/canlib/index", "applications/canutils/cansend/index",
"applications/c [...]
\ No newline at end of file
+Search.setIndex({"docnames": ["applications/audioutils/fmsynt/index",
"applications/audioutils/index", "applications/audioutils/mml_parser/index",
"applications/audioutils/nxaudio/index",
"applications/benchmarks/coremark/index", "applications/benchmarks/index",
"applications/boot/index", "applications/boot/mcuboot/index",
"applications/boot/miniboot/index", "applications/canutils/candump/index",
"applications/canutils/canlib/index", "applications/canutils/cansend/index",
"applications/c [...]
\ No newline at end of file
diff --git a/content/docs/12.6.0/index.html b/content/docs/12.6.0/index.html
index b6342413e5..ece50b8a19 100644
--- a/content/docs/12.6.0/index.html
+++ b/content/docs/12.6.0/index.html
@@ -176,7 +176,7 @@ standards. Additional standard APIs from Unix and other
common RTOS’s (such as
VxWorks) are adopted for functionality not available under these standards, or
for functionality that is not appropriate for deeply-embedded environments
(such
as fork()).</p>
-<p>Last Updated: 20 February 25 at 00:21</p>
+<p>Last Updated: 21 February 25 at 00:20</p>
<div class="toctree-wrapper compound">
<p class="caption" role="heading"><span class="caption-text">Table of
Contents</span></p>
<ul class="current">
diff --git a/content/docs/12.7.0/index.html b/content/docs/12.7.0/index.html
index 3c76a1ef39..6b610316af 100644
--- a/content/docs/12.7.0/index.html
+++ b/content/docs/12.7.0/index.html
@@ -175,7 +175,7 @@ standards. Additional standard APIs from Unix and other
common RTOS’s (such as
VxWorks) are adopted for functionality not available under these standards, or
for functionality that is not appropriate for deeply-embedded environments
(such
as fork()).</p>
-<p>Last Updated: 20 February 25 at 00:23</p>
+<p>Last Updated: 21 February 25 at 00:22</p>
<div class="toctree-wrapper compound">
<p class="caption" role="heading"><span class="caption-text">Table of
Contents</span></p>
<ul class="current">
diff --git a/content/docs/12.7.0/searchindex.js
b/content/docs/12.7.0/searchindex.js
index 3308b43090..e1327aa2f0 100644
--- a/content/docs/12.7.0/searchindex.js
+++ b/content/docs/12.7.0/searchindex.js
@@ -1 +1 @@
-Search.setIndex({"docnames": ["applications/audioutils/fmsynt/index",
"applications/audioutils/index", "applications/audioutils/mml_parser/index",
"applications/audioutils/nxaudio/index",
"applications/benchmarks/cachespeed/index",
"applications/benchmarks/coremark-pro/index",
"applications/benchmarks/coremark/index",
"applications/benchmarks/dhrystone/index", "applications/benchmarks/fio/index",
"applications/benchmarks/index", "applications/benchmarks/iozone/index",
"applications/bench [...]
\ No newline at end of file
+Search.setIndex({"docnames": ["applications/audioutils/fmsynt/index",
"applications/audioutils/index", "applications/audioutils/mml_parser/index",
"applications/audioutils/nxaudio/index",
"applications/benchmarks/cachespeed/index",
"applications/benchmarks/coremark-pro/index",
"applications/benchmarks/coremark/index",
"applications/benchmarks/dhrystone/index", "applications/benchmarks/fio/index",
"applications/benchmarks/index", "applications/benchmarks/iozone/index",
"applications/bench [...]
\ No newline at end of file
diff --git a/content/docs/12.8.0/index.html b/content/docs/12.8.0/index.html
index 5ec06da66e..f49701ae79 100644
--- a/content/docs/12.8.0/index.html
+++ b/content/docs/12.8.0/index.html
@@ -175,7 +175,7 @@ standards. Additional standard APIs from Unix and other
common RTOS’s (such as
VxWorks) are adopted for functionality not available under these standards, or
for functionality that is not appropriate for deeply-embedded environments
(such
as fork()).</p>
-<p>Last Updated: 20 February 25 at 00:24</p>
+<p>Last Updated: 21 February 25 at 00:23</p>
<div class="toctree-wrapper compound">
<p class="caption" role="heading"><span class="caption-text">Table of
Contents</span></p>
<ul class="current">
diff --git a/content/docs/12.8.0/searchindex.js
b/content/docs/12.8.0/searchindex.js
index ec37f44f7a..72c801b270 100644
--- a/content/docs/12.8.0/searchindex.js
+++ b/content/docs/12.8.0/searchindex.js
@@ -1 +1 @@
-Search.setIndex({"docnames": ["applications/audioutils/fmsynt/index",
"applications/audioutils/index", "applications/audioutils/mml_parser/index",
"applications/audioutils/nxaudio/index",
"applications/benchmarks/cachespeed/index",
"applications/benchmarks/coremark-pro/index",
"applications/benchmarks/coremark/index",
"applications/benchmarks/dhrystone/index", "applications/benchmarks/fio/index",
"applications/benchmarks/index", "applications/benchmarks/iozone/index",
"applications/bench [...]
\ No newline at end of file
+Search.setIndex({"docnames": ["applications/audioutils/fmsynt/index",
"applications/audioutils/index", "applications/audioutils/mml_parser/index",
"applications/audioutils/nxaudio/index",
"applications/benchmarks/cachespeed/index",
"applications/benchmarks/coremark-pro/index",
"applications/benchmarks/coremark/index",
"applications/benchmarks/dhrystone/index", "applications/benchmarks/fio/index",
"applications/benchmarks/index", "applications/benchmarks/iozone/index",
"applications/bench [...]
\ No newline at end of file
diff --git a/content/docs/latest/_images/esp32s3-audio-config-file.png
b/content/docs/latest/_images/esp32s3-audio-config-file.png
new file mode 100644
index 0000000000..c51fa32e29
Binary files /dev/null and
b/content/docs/latest/_images/esp32s3-audio-config-file.png differ
diff --git a/content/docs/latest/_images/esp32s3_lcd_ev.png
b/content/docs/latest/_images/esp32s3_lcd_ev.png
new file mode 100644
index 0000000000..23be064d3a
Binary files /dev/null and b/content/docs/latest/_images/esp32s3_lcd_ev.png
differ
diff --git
a/content/docs/latest/_sources/platforms/risc-v/esp32c6/index.rst.txt
b/content/docs/latest/_sources/platforms/risc-v/esp32c6/index.rst.txt
index bd98d966e6..c6049e3719 100644
--- a/content/docs/latest/_sources/platforms/risc-v/esp32c6/index.rst.txt
+++ b/content/docs/latest/_sources/platforms/risc-v/esp32c6/index.rst.txt
@@ -283,12 +283,12 @@ GPIO Yes
HMAC No
I2C Yes
I2S No
-Int. Temp. No
+Int. Temp. Yes
LED No
LED_PWM Yes
MCPWM Yes
Pulse Counter Yes
-RMT No
+RMT Yes
RNG No
RSA No
RTC Yes
diff --git
a/content/docs/latest/_sources/platforms/risc-v/esp32h2/index.rst.txt
b/content/docs/latest/_sources/platforms/risc-v/esp32h2/index.rst.txt
index 95a2d0aef8..7fff0591a0 100644
--- a/content/docs/latest/_sources/platforms/risc-v/esp32h2/index.rst.txt
+++ b/content/docs/latest/_sources/platforms/risc-v/esp32h2/index.rst.txt
@@ -283,12 +283,12 @@ GPIO Yes
HMAC No
I2C Yes
I2S No
-Int. Temp. No
+Int. Temp. Yes
LED No
LED_PWM Yes
MCPWM No
Pulse Counter Yes
-RMT No
+RMT Yes
RNG No
RSA No
RTC Yes
diff --git
a/content/docs/latest/_sources/platforms/xtensa/esp32s3/boards/esp32s3-lcd-ev/index.rst.txt
b/content/docs/latest/_sources/platforms/xtensa/esp32s3/boards/esp32s3-lcd-ev/index.rst.txt
new file mode 100644
index 0000000000..9b36d11cd7
--- /dev/null
+++
b/content/docs/latest/_sources/platforms/xtensa/esp32s3/boards/esp32s3-lcd-ev/index.rst.txt
@@ -0,0 +1,156 @@
+===============
+ESP32-S3-LCD-EV
+===============
+
+The `ESP32-S3-LCD-EV-Board
<https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s3/esp32-s3-lcd-ev-board/user_guide.html>`_
is a small-sized AI development board from Espressif featuring the ESP32-S3
CPU with a touchscreen LCD display, dual microphone, an 16 MB Octal PSRAM and
an 16 MB flash.
+
+.. list-table::
+ :align: center
+
+ * - .. figure:: esp32s3_lcd_ev.png
+ :align: center
+
+Features
+========
+
+ - ESP32-S3 WROOM-1 Module
+ - USB Type-C ports
+ - Power LED
+ - LCD Display
+ - MEMS Microphone
+ - 16MB Octal PSRAM
+ - 16MB SPI Flash
+ - RST and BOOT buttons (BOOT accessible to user)
+
+Serial Console
+==============
+
+UART0 is, by default, the serial console. It connects to the on-board
+CP2102 converter and is available on the USB connector USB CON8 (J1).
+
+It will show up as /dev/ttyUSB[n] where [n] will probably be 0.
+
+Buttons and LEDs
+================
+
+Board Buttons
+-------------
+
+There are two buttons labeled Boot and EN. The EN button is not available
+to software. It pulls the chip enable line that doubles as a reset line.
+
+The BOOT button is connected to IO0. On reset it is used as a strapping
+pin to determine whether the chip boots normally or into the serial
+bootloader. After reset, however, the BOOT button can be used for software
+input.
+
+Board LEDs
+----------
+
+There are several on-board LEDs for that indicate the presence of power
+and USB activity. None of these are available for use by software.
+Another WS2812 LED is connected to GPIO4.
+
+Configurations
+==============
+
+All of the configurations presented below can be tested by running the
following commands::
+
+ $ ./tools/configure.sh esp32s3-lcd-ev:<config_name>
+ $ make flash ESPTOOL_PORT=/dev/ttyUSB0 -j
+
+Where <config_name> is the name of board configuration you want to use, i.e.:
nsh, buttons, wifi...
+Then use a serial console terminal like ``picocom`` configured to 115200 8N1.
+
+audio
+-----
+
+This configuration uses the I2S0 peripheral and an externally connected audio
+codec to play an audio file streamed over an HTTP connection while connected
+to a Wi-Fi network.
+
+**Audio Codec Setup**
+
+The CS4344 audio codec is connected to the following pins:
+
+============ ========== ============================================
+ESP32-S3 Pin CS4344 Pin Description
+============ ========== ============================================
+5 MCLK Master Clock
+16 SCLK Serial Clock
+7 LRCK Left Right Clock (Word Select)
+6 SDIN Serial Data In on CS4344. (DOUT on ESP32-S3)
+============ ========== ============================================
+
+**Simple HTTP server**
+
+Prepare a PCM-encoded (`.wav`) audio file with 16 or 24 bits/sample (sampled at
+16~48kHz). This file must be placed into a folder in a computer that could
+be accessed on the same Wi-Fi network the ESP32 will be connecting to.
+
+Python provides a simple HTTP server. ``cd`` to the audio file folder on the
+PC and run::
+
+ $ python3 -m http.server
+ Serving HTTP on 0.0.0.0 port 8000 (http://0.0.0.0:8000/)
+
+Look for your PC IP address and test playing the prepared audio on your
+browser:
+
+.. figure:: esp32s3-audio-config-file.png
+ :align: center
+
+After successfully built and flashed, connect the board to the Wi-Fi network::
+
+ nsh> wapi psk wlan0 mypasswd 3
+ nsh> wapi essid wlan0 myssid 1
+ nsh> renew wlan0
+
+Once connected, open NuttX's player and play the file according to the filename
+and the IP address of the HTTP server::
+
+ nsh> nxplayer
+ nxplayer> play http://192.168.1.239:8000/tones.wav
+
+buttons
+-------
+
+This configuration shows the use of the buttons subsystem. It can be used by
executing
+the ``buttons`` application and pressing on any of the available board
buttons::
+
+ nsh> buttons
+ buttons_main: Starting the button_daemon
+ buttons_main: button_daemon started
+ button_daemon: Running
+ button_daemon: Opening /dev/buttons
+ button_daemon: Supported BUTTONs 0x01
+ nsh> Sample = 1
+ Sample = 0
+
+lvgl
+----
+
+This is a demonstration of the LVGL graphics library running on the NuttX LCD
+driver. You can find LVGL here::
+
+ https://www.lvgl.io/
+ https://github.com/lvgl/lvgl
+
+This configuration uses the LVGL demonstration at `apps/examples/lvgldemo`.
+
+nsh
+---
+
+Basic NuttShell configuration (console enabled in UART0, exposed via
+USB connection by means of CP2102 converter, at 115200 bps).
+
+ws2812
+------
+
+This configuration enables the usage of the RMT peripheral and the example
+``ws2812`` to drive addressable RGB LEDs::
+
+ nsh> ws2812
+
+Please note that this board contains an on-board WS2812 LED connected to GPIO38
+and, by default, this config configures the RMT transmitter in the same pin.
diff --git a/content/docs/latest/index.html b/content/docs/latest/index.html
index 886c330191..9f767af472 100644
--- a/content/docs/latest/index.html
+++ b/content/docs/latest/index.html
@@ -175,7 +175,7 @@ standards. Additional standard APIs from Unix and other
common RTOS’s (such as
VxWorks) are adopted for functionality not available under these standards, or
for functionality that is not appropriate for deeply-embedded environments
(such
as fork()).</p>
-<p>Last Updated: 20 February 25 at 00:26</p>
+<p>Last Updated: 21 February 25 at 00:25</p>
<div class="toctree-wrapper compound">
<p class="caption" role="heading"><span class="caption-text">Table of
Contents</span></p>
<ul class="current">
diff --git a/content/docs/latest/objects.inv b/content/docs/latest/objects.inv
index cb2f47998d..c30d716378 100644
Binary files a/content/docs/latest/objects.inv and
b/content/docs/latest/objects.inv differ
diff --git a/content/docs/latest/platforms/index.html
b/content/docs/latest/platforms/index.html
index ed66ec79a8..eb0e872e5b 100644
--- a/content/docs/latest/platforms/index.html
+++ b/content/docs/latest/platforms/index.html
@@ -856,6 +856,7 @@ series and boards supported in NuttX:</p>
<li class="toctree-l3"><a class="reference internal"
href="xtensa/esp32s3/boards/esp32s3-devkit/index.html">ESP32S3-DevKit</a></li>
<li class="toctree-l3"><a class="reference internal"
href="xtensa/esp32s3/boards/esp32s3-eye/index.html">ESP32-S3-EYE</a></li>
<li class="toctree-l3"><a class="reference internal"
href="xtensa/esp32s3/boards/esp32s3-korvo-2/index.html">ESP32-S3-Korvo-2
V3.0</a></li>
+<li class="toctree-l3"><a class="reference internal"
href="xtensa/esp32s3/boards/esp32s3-lcd-ev/index.html">ESP32-S3-LCD-EV</a></li>
<li class="toctree-l3"><a class="reference internal"
href="xtensa/esp32s3/boards/esp32s3-lhcbit/index.html">esp32s3-lhcbit</a></li>
</ul>
</li>
diff --git a/content/docs/latest/platforms/risc-v/esp32c6/index.html
b/content/docs/latest/platforms/risc-v/esp32c6/index.html
index 803a4a20f7..ae6fe749d8 100644
--- a/content/docs/latest/platforms/risc-v/esp32c6/index.html
+++ b/content/docs/latest/platforms/risc-v/esp32c6/index.html
@@ -531,7 +531,7 @@ Backtrace for task 0:
<td><p>No</p></td>
</tr>
<tr class="row-odd"><td><p>Int. Temp.</p></td>
-<td><p>No</p></td>
+<td><p>Yes</p></td>
</tr>
<tr class="row-even"><td><p>LED</p></td>
<td><p>No</p></td>
@@ -546,7 +546,7 @@ Backtrace for task 0:
<td><p>Yes</p></td>
</tr>
<tr class="row-even"><td><p>RMT</p></td>
-<td><p>No</p></td>
+<td><p>Yes</p></td>
</tr>
<tr class="row-odd"><td><p>RNG</p></td>
<td><p>No</p></td>
diff --git a/content/docs/latest/platforms/risc-v/esp32h2/index.html
b/content/docs/latest/platforms/risc-v/esp32h2/index.html
index ae79cda80e..38cdfad4a9 100644
--- a/content/docs/latest/platforms/risc-v/esp32h2/index.html
+++ b/content/docs/latest/platforms/risc-v/esp32h2/index.html
@@ -530,7 +530,7 @@ Backtrace for task 0:
<td><p>No</p></td>
</tr>
<tr class="row-odd"><td><p>Int. Temp.</p></td>
-<td><p>No</p></td>
+<td><p>Yes</p></td>
</tr>
<tr class="row-even"><td><p>LED</p></td>
<td><p>No</p></td>
@@ -545,7 +545,7 @@ Backtrace for task 0:
<td><p>Yes</p></td>
</tr>
<tr class="row-even"><td><p>RMT</p></td>
-<td><p>No</p></td>
+<td><p>Yes</p></td>
</tr>
<tr class="row-odd"><td><p>RNG</p></td>
<td><p>No</p></td>
diff --git
a/content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-devkit/index.html
b/content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-devkit/index.html
index 719c3dfbfe..24b24a7c7f 100644
---
a/content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-devkit/index.html
+++
b/content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-devkit/index.html
@@ -152,6 +152,7 @@
<li class="toctree-l5 current"><a class="current reference internal"
href="#">ESP32S3-DevKit</a></li>
<li class="toctree-l5"><a class="reference internal"
href="../esp32s3-eye/index.html">ESP32-S3-EYE</a></li>
<li class="toctree-l5"><a class="reference internal"
href="../esp32s3-korvo-2/index.html">ESP32-S3-Korvo-2 V3.0</a></li>
+<li class="toctree-l5"><a class="reference internal"
href="../esp32s3-lcd-ev/index.html">ESP32-S3-LCD-EV</a></li>
<li class="toctree-l5"><a class="reference internal"
href="../esp32s3-lhcbit/index.html">esp32s3-lhcbit</a></li>
</ul>
</li>
diff --git
a/content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-eye/index.html
b/content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-eye/index.html
index 532e1a7f0d..961f13f690 100644
--- a/content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-eye/index.html
+++ b/content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-eye/index.html
@@ -152,6 +152,7 @@
<li class="toctree-l5"><a class="reference internal"
href="../esp32s3-devkit/index.html">ESP32S3-DevKit</a></li>
<li class="toctree-l5 current"><a class="current reference internal"
href="#">ESP32-S3-EYE</a></li>
<li class="toctree-l5"><a class="reference internal"
href="../esp32s3-korvo-2/index.html">ESP32-S3-Korvo-2 V3.0</a></li>
+<li class="toctree-l5"><a class="reference internal"
href="../esp32s3-lcd-ev/index.html">ESP32-S3-LCD-EV</a></li>
<li class="toctree-l5"><a class="reference internal"
href="../esp32s3-lhcbit/index.html">esp32s3-lhcbit</a></li>
</ul>
</li>
diff --git
a/content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-korvo-2/index.html
b/content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-korvo-2/index.html
index 335d2e29f5..06175cd849 100644
---
a/content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-korvo-2/index.html
+++
b/content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-korvo-2/index.html
@@ -43,7 +43,7 @@
<script src="../../../../../_static/js/theme.js"></script>
<link rel="index" title="Index" href="../../../../../genindex.html" />
<link rel="search" title="Search" href="../../../../../search.html" />
- <link rel="next" title="esp32s3-lhcbit"
href="../esp32s3-lhcbit/index.html" />
+ <link rel="next" title="ESP32-S3-LCD-EV"
href="../esp32s3-lcd-ev/index.html" />
<link rel="prev" title="ESP32-S3-EYE" href="../esp32s3-eye/index.html" />
</head>
@@ -152,6 +152,7 @@
<li class="toctree-l5"><a class="reference internal"
href="../esp32s3-devkit/index.html">ESP32S3-DevKit</a></li>
<li class="toctree-l5"><a class="reference internal"
href="../esp32s3-eye/index.html">ESP32-S3-EYE</a></li>
<li class="toctree-l5 current"><a class="current reference internal"
href="#">ESP32-S3-Korvo-2 V3.0</a></li>
+<li class="toctree-l5"><a class="reference internal"
href="../esp32s3-lcd-ev/index.html">ESP32-S3-LCD-EV</a></li>
<li class="toctree-l5"><a class="reference internal"
href="../esp32s3-lhcbit/index.html">esp32s3-lhcbit</a></li>
</ul>
</li>
@@ -1415,7 +1416,7 @@ content streamed through the Wi-Fi in CD quality!</p>
</div>
<footer><div class="rst-footer-buttons" role="navigation"
aria-label="Footer">
<a href="../esp32s3-eye/index.html" class="btn btn-neutral float-left"
title="ESP32-S3-EYE" accesskey="p" rel="prev"><span class="fa
fa-arrow-circle-left" aria-hidden="true"></span> Previous</a>
- <a href="../esp32s3-lhcbit/index.html" class="btn btn-neutral
float-right" title="esp32s3-lhcbit" accesskey="n" rel="next">Next <span
class="fa fa-arrow-circle-right" aria-hidden="true"></span></a>
+ <a href="../esp32s3-lcd-ev/index.html" class="btn btn-neutral
float-right" title="ESP32-S3-LCD-EV" accesskey="n" rel="next">Next <span
class="fa fa-arrow-circle-right" aria-hidden="true"></span></a>
</div>
<hr/>
diff --git
a/content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-eye/index.html
b/content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-lcd-ev/index.html
similarity index 70%
copy from
content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-eye/index.html
copy to
content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-lcd-ev/index.html
index 532e1a7f0d..5be1fb21e1 100644
--- a/content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-eye/index.html
+++
b/content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-lcd-ev/index.html
@@ -25,7 +25,7 @@
<meta charset="utf-8" /><meta name="generator" content="Docutils 0.19:
https://docutils.sourceforge.io/"; />
<meta name="viewport" content="width=device-width, initial-scale=1.0" />
- <title>ESP32-S3-EYE — NuttX latest documentation</title>
+ <title>ESP32-S3-LCD-EV — NuttX latest documentation</title>
<link rel="stylesheet" type="text/css"
href="../../../../../_static/pygments.css" />
<link rel="stylesheet" type="text/css"
href="../../../../../_static/css/theme.css" />
<link rel="stylesheet" type="text/css"
href="../../../../../_static/copybutton.css" />
@@ -43,8 +43,8 @@
<script src="../../../../../_static/js/theme.js"></script>
<link rel="index" title="Index" href="../../../../../genindex.html" />
<link rel="search" title="Search" href="../../../../../search.html" />
- <link rel="next" title="ESP32-S3-Korvo-2 V3.0"
href="../esp32s3-korvo-2/index.html" />
- <link rel="prev" title="ESP32S3-DevKit"
href="../esp32s3-devkit/index.html" />
+ <link rel="next" title="esp32s3-lhcbit"
href="../esp32s3-lhcbit/index.html" />
+ <link rel="prev" title="ESP32-S3-Korvo-2 V3.0"
href="../esp32s3-korvo-2/index.html" />
</head>
<body class="wy-body-for-nav">
@@ -150,8 +150,9 @@
<li class="toctree-l4"><a class="reference internal"
href="../../index.html#peripheral-support">Peripheral Support</a></li>
<li class="toctree-l4 current"><a class="reference internal"
href="../../index.html#supported-boards">Supported Boards</a><ul
class="current">
<li class="toctree-l5"><a class="reference internal"
href="../esp32s3-devkit/index.html">ESP32S3-DevKit</a></li>
-<li class="toctree-l5 current"><a class="current reference internal"
href="#">ESP32-S3-EYE</a></li>
+<li class="toctree-l5"><a class="reference internal"
href="../esp32s3-eye/index.html">ESP32-S3-EYE</a></li>
<li class="toctree-l5"><a class="reference internal"
href="../esp32s3-korvo-2/index.html">ESP32-S3-Korvo-2 V3.0</a></li>
+<li class="toctree-l5 current"><a class="current reference internal"
href="#">ESP32-S3-LCD-EV</a></li>
<li class="toctree-l5"><a class="reference internal"
href="../esp32s3-lhcbit/index.html">esp32s3-lhcbit</a></li>
</ul>
</li>
@@ -190,9 +191,9 @@
<li class="breadcrumb-item"><a
href="../../../../index.html">Supported Platforms</a></li>
<li class="breadcrumb-item"><a
href="../../../index.html">Xtensa</a></li>
<li class="breadcrumb-item"><a href="../../index.html">Espressif
ESP32-S3</a></li>
- <li class="breadcrumb-item active">ESP32-S3-EYE</li>
+ <li class="breadcrumb-item active">ESP32-S3-LCD-EV</li>
<li class="wy-breadcrumbs-aside">
- <a
href="../../../../../_sources/platforms/xtensa/esp32s3/boards/esp32s3-eye/index.rst.txt"
rel="nofollow"> View page source</a>
+ <a
href="../../../../../_sources/platforms/xtensa/esp32s3/boards/esp32s3-lcd-ev/index.rst.txt"
rel="nofollow"> View page source</a>
</li>
</ul>
<hr/>
@@ -200,13 +201,13 @@
<div role="main" class="document" itemscope="itemscope"
itemtype="http://schema.org/Article";>
<div itemprop="articleBody">
- <section id="esp32-s3-eye">
-<h1>ESP32-S3-EYE<a class="headerlink" href="#esp32-s3-eye" title="Permalink to
this heading"></a></h1>
-<p>The <a class="reference external"
href="https://github.com/espressif/esp-who/blob/master/docs/en/get-started/ESP32-S3-EYE_Getting_Started_Guide.md";>ESP32-S3-EYE</a>
is a small-sized AI development board from Espressif featuring the ESP32-S3
CPU with a 2-Megapixel camera, an LCD display, a microphone, an 8 MB Octal
PSRAM and an 8 MB flash.</p>
+ <section id="esp32-s3-lcd-ev">
+<h1>ESP32-S3-LCD-EV<a class="headerlink" href="#esp32-s3-lcd-ev"
title="Permalink to this heading"></a></h1>
+<p>The <a class="reference external"
href="https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s3/esp32-s3-lcd-ev-board/user_guide.html";>ESP32-S3-LCD-EV-Board</a>
is a small-sized AI development board from Espressif featuring the ESP32-S3
CPU with a touchscreen LCD display, dual microphone, an 16 MB Octal PSRAM and
an 16 MB flash.</p>
<table class="docutils align-center">
<tbody>
<tr class="row-odd"><td><figure class="align-center">
-<img alt="../../../../../_images/esp32s3_eye.png"
src="../../../../../_images/esp32s3_eye.png" />
+<img alt="../../../../../_images/esp32s3_lcd_ev.png"
src="../../../../../_images/esp32s3_lcd_ev.png" />
</figure>
</td>
</tr>
@@ -217,98 +218,27 @@
<blockquote>
<div><ul class="simple">
<li><p>ESP32-S3 WROOM-1 Module</p></li>
-<li><p>USB micro USB port (it uses internal USB JTAG SERIAL device for
flashing)</p></li>
+<li><p>USB Type-C ports</p></li>
<li><p>Power LED</p></li>
<li><p>LCD Display</p></li>
-<li><p>2-MP Camera</p></li>
<li><p>MEMS Microphone</p></li>
-<li><p>8MB Octal PSRAM</p></li>
-<li><p>8MB SPI Flash</p></li>
+<li><p>16MB Octal PSRAM</p></li>
+<li><p>16MB SPI Flash</p></li>
<li><p>RST and BOOT buttons (BOOT accessible to user)</p></li>
</ul>
</div></blockquote>
</section>
-<section id="configurations">
-<h2>Configurations<a class="headerlink" href="#configurations"
title="Permalink to this heading"></a></h2>
-<p>All of the configurations presented below can be tested by running the
following commands:</p>
-<div class="highlight-none notranslate"><div
class="highlight"><pre><span></span>$ ./tools/configure.sh
esp32s3-eye:<config_name>
-$ make flash ESPTOOL_PORT=/dev/ttyUSB0 -j
-</pre></div>
-</div>
-<p>Where <config_name> is the name of board configuration you want to
use, i.e.: nsh, buttons, wifi…
-Then use a serial console terminal like <code class="docutils literal
notranslate"><span class="pre">picocom</span></code> configured to 115200
8N1.</p>
-<section id="nsh">
-<h3>nsh<a class="headerlink" href="#nsh" title="Permalink to this
heading"></a></h3>
-<p>Basic NuttShell configuration (console enabled in USB JTAG SERIAL Device,
exposed via
-USB connection at 9600 bps).</p>
-</section>
-<section id="usbnsh">
-<h3>usbnsh<a class="headerlink" href="#usbnsh" title="Permalink to this
heading"></a></h3>
-<p>Basic NuttShell configuration console enabled over USB Device (USB
CDC/ACM).</p>
-<p>Before using this configuration, please confirm that your computer detected
-that USB JTAG/serial interface used to flash the board:</p>
-<div class="highlight-none notranslate"><div
class="highlight"><pre><span></span>usb 3-5.2.3: New USB device strings: Mfr=1,
Product=2, SerialNumber=3
-usb 3-5.2.3: Product: USB JTAG/serial debug unit
-usb 3-5.2.3: Manufacturer: Espressif
-usb 3-5.2.3: SerialNumber: XX:XX:XX:XX:XX:XX
-cdc_acm 3-5.2.3:1.0: ttyACM0: USB ACM device
-</pre></div>
-</div>
-<p>Then you can run the configuration and compilation procedure:</p>
-<div class="highlight-none notranslate"><div
class="highlight"><pre><span></span>$ ./tools/configure.sh esp32s3-eye:usbnsh
-$ make flash ESPTOOL_PORT=/dev/ttyACM0 -j8
-</pre></div>
-</div>
-<p>Then run the minicom configured to /dev/ttyACM0 115200 8n1 and
-press <ENTER> three times to force the nsh to show up:</p>
-<div class="highlight-none notranslate"><div
class="highlight"><pre><span></span>NuttShell (NSH) NuttX-12.1.0
-nsh> ?
-help usage: help [-v] [<cmd>]
-
- . break dd exit ls ps source
umount
- [ cat df false mkdir pwd test unset
- ? cd dmesg free mkrd rm time
uptime
- alias cp echo help mount rmdir true
usleep
- unalias cmp env hexdump mv set truncate xd
- basename dirname exec kill printf sleep uname
-
-Builtin Apps:
- nsh sh
-nsh> uname -a
-NuttX 12.1.0 38a73cd970 Jun 18 2023 16:58:46 xtensa esp32s3-eye
-nsh>
-</pre></div>
-</div>
-</section>
-</section>
-<section id="flashing">
-<h2>Flashing<a class="headerlink" href="#flashing" title="Permalink to this
heading"></a></h2>
-<p>Because ESP32-S3 doesn’t use an external USB/Serial chip like others ESP32
-boards you should put it in programming mode this way:</p>
-<blockquote>
-<div><ol class="arabic simple">
-<li><p>Press and hold BOOT and RESET (RST) buttons at same time;</p></li>
-<li><p>Release the RESET button and keep BOOT button pressed;</p></li>
-<li><p>After one or more seconds release the BOOT button;</p></li>
-<li><p>Run the flashing command: make flash ESPTOOL_PORT=/dev/ttyACM0</p></li>
-</ol>
-</div></blockquote>
-</section>
<section id="serial-console">
<h2>Serial Console<a class="headerlink" href="#serial-console"
title="Permalink to this heading"></a></h2>
-<p>The internal USB JTAG SERIAL Device, by default, is used as serial console.
-It is normally detected by Linux host as a USB CDC/ACM serial device.</p>
-<p>It will show up as /dev/ttyACM[n] where [n] will probably be 0.</p>
-<p>You can use minicom with /dev/ttyACM0 port at 9600 8n1 or picocom this
way:</p>
-<blockquote>
-<div><p>$ picocom -b9600 /dev/ttyACM0</p>
-</div></blockquote>
+<p>UART0 is, by default, the serial console. It connects to the on-board
+CP2102 converter and is available on the USB connector USB CON8 (J1).</p>
+<p>It will show up as /dev/ttyUSB[n] where [n] will probably be 0.</p>
</section>
<section id="buttons-and-leds">
<h2>Buttons and LEDs<a class="headerlink" href="#buttons-and-leds"
title="Permalink to this heading"></a></h2>
<section id="board-buttons">
<h3>Board Buttons<a class="headerlink" href="#board-buttons" title="Permalink
to this heading"></a></h3>
-<p>There are two buttons labeled BOOT and RST. The RST button is not available
+<p>There are two buttons labeled Boot and EN. The EN button is not available
to software. It pulls the chip enable line that doubles as a reset line.</p>
<p>The BOOT button is connected to IO0. On reset it is used as a strapping
pin to determine whether the chip boots normally or into the serial
@@ -318,29 +248,120 @@ input.</p>
<section id="board-leds">
<h3>Board LEDs<a class="headerlink" href="#board-leds" title="Permalink to
this heading"></a></h3>
<p>There are several on-board LEDs for that indicate the presence of power
-and USB activity. None of these are available for use by software.</p>
+and USB activity. None of these are available for use by software.
+Another WS2812 LED is connected to GPIO4.</p>
</section>
</section>
-<section id="pin-mapping">
-<h2>Pin Mapping<a class="headerlink" href="#pin-mapping" title="Permalink to
this heading"></a></h2>
-<div class="admonition-todo admonition" id="id2">
-<p class="admonition-title">Todo</p>
-<p>To be updated</p>
+<section id="configurations">
+<h2>Configurations<a class="headerlink" href="#configurations"
title="Permalink to this heading"></a></h2>
+<p>All of the configurations presented below can be tested by running the
following commands:</p>
+<div class="highlight-none notranslate"><div
class="highlight"><pre><span></span>$ ./tools/configure.sh
esp32s3-lcd-ev:<config_name>
+$ make flash ESPTOOL_PORT=/dev/ttyUSB0 -j
+</pre></div>
</div>
+<p>Where <config_name> is the name of board configuration you want to
use, i.e.: nsh, buttons, wifi…
+Then use a serial console terminal like <code class="docutils literal
notranslate"><span class="pre">picocom</span></code> configured to 115200
8N1.</p>
+<section id="audio">
+<h3>audio<a class="headerlink" href="#audio" title="Permalink to this
heading"></a></h3>
+<p>This configuration uses the I2S0 peripheral and an externally connected
audio
+codec to play an audio file streamed over an HTTP connection while connected
+to a Wi-Fi network.</p>
+<p><strong>Audio Codec Setup</strong></p>
+<p>The CS4344 audio codec is connected to the following pins:</p>
<table class="docutils align-default">
<thead>
-<tr class="row-odd"><th class="head"><p>Pin</p></th>
-<th class="head"><p>Signal</p></th>
-<th class="head"><p>Notes</p></th>
+<tr class="row-odd"><th class="head"><p>ESP32-S3 Pin</p></th>
+<th class="head"><p>CS4344 Pin</p></th>
+<th class="head"><p>Description</p></th>
</tr>
</thead>
<tbody>
-<tr class="row-even"><td><p>?</p></td>
-<td><p>?</p></td>
-<td><p>?</p></td>
+<tr class="row-even"><td><p>5</p></td>
+<td><p>MCLK</p></td>
+<td><p>Master Clock</p></td>
+</tr>
+<tr class="row-odd"><td><p>16</p></td>
+<td><p>SCLK</p></td>
+<td><p>Serial Clock</p></td>
+</tr>
+<tr class="row-even"><td><p>7</p></td>
+<td><p>LRCK</p></td>
+<td><p>Left Right Clock (Word Select)</p></td>
+</tr>
+<tr class="row-odd"><td><p>6</p></td>
+<td><p>SDIN</p></td>
+<td><p>Serial Data In on CS4344. (DOUT on ESP32-S3)</p></td>
</tr>
</tbody>
</table>
+<p><strong>Simple HTTP server</strong></p>
+<p>Prepare a PCM-encoded (<cite>.wav</cite>) audio file with 16 or 24
bits/sample (sampled at
+16~48kHz). This file must be placed into a folder in a computer that could
+be accessed on the same Wi-Fi network the ESP32 will be connecting to.</p>
+<p>Python provides a simple HTTP server. <code class="docutils literal
notranslate"><span class="pre">cd</span></code> to the audio file folder on the
+PC and run:</p>
+<div class="highlight-none notranslate"><div
class="highlight"><pre><span></span>$ python3 -m http.server
+Serving HTTP on 0.0.0.0 port 8000 (http://0.0.0.0:8000/)
+</pre></div>
+</div>
+<p>Look for your PC IP address and test playing the prepared audio on your
+browser:</p>
+<figure class="align-center">
+<img alt="../../../../../_images/esp32s3-audio-config-file.png"
src="../../../../../_images/esp32s3-audio-config-file.png" />
+</figure>
+<p>After successfully built and flashed, connect the board to the Wi-Fi
network:</p>
+<div class="highlight-none notranslate"><div
class="highlight"><pre><span></span>nsh> wapi psk wlan0 mypasswd 3
+nsh> wapi essid wlan0 myssid 1
+nsh> renew wlan0
+</pre></div>
+</div>
+<p>Once connected, open NuttX’s player and play the file according to the
filename
+and the IP address of the HTTP server:</p>
+<div class="highlight-none notranslate"><div
class="highlight"><pre><span></span>nsh> nxplayer
+nxplayer> play http://192.168.1.239:8000/tones.wav
+</pre></div>
+</div>
+</section>
+<section id="buttons">
+<h3>buttons<a class="headerlink" href="#buttons" title="Permalink to this
heading"></a></h3>
+<p>This configuration shows the use of the buttons subsystem. It can be used
by executing
+the <code class="docutils literal notranslate"><span
class="pre">buttons</span></code> application and pressing on any of the
available board buttons:</p>
+<div class="highlight-none notranslate"><div
class="highlight"><pre><span></span>nsh> buttons
+buttons_main: Starting the button_daemon
+buttons_main: button_daemon started
+button_daemon: Running
+button_daemon: Opening /dev/buttons
+button_daemon: Supported BUTTONs 0x01
+nsh> Sample = 1
+Sample = 0
+</pre></div>
+</div>
+</section>
+<section id="lvgl">
+<h3>lvgl<a class="headerlink" href="#lvgl" title="Permalink to this
heading"></a></h3>
+<p>This is a demonstration of the LVGL graphics library running on the NuttX
LCD
+driver. You can find LVGL here:</p>
+<div class="highlight-none notranslate"><div
class="highlight"><pre><span></span>https://www.lvgl.io/
+https://github.com/lvgl/lvgl
+</pre></div>
+</div>
+<p>This configuration uses the LVGL demonstration at
<cite>apps/examples/lvgldemo</cite>.</p>
+</section>
+<section id="nsh">
+<h3>nsh<a class="headerlink" href="#nsh" title="Permalink to this
heading"></a></h3>
+<p>Basic NuttShell configuration (console enabled in UART0, exposed via
+USB connection by means of CP2102 converter, at 115200 bps).</p>
+</section>
+<section id="ws2812">
+<h3>ws2812<a class="headerlink" href="#ws2812" title="Permalink to this
heading"></a></h3>
+<p>This configuration enables the usage of the RMT peripheral and the example
+<code class="docutils literal notranslate"><span
class="pre">ws2812</span></code> to drive addressable RGB LEDs:</p>
+<div class="highlight-none notranslate"><div
class="highlight"><pre><span></span>nsh> ws2812
+</pre></div>
+</div>
+<p>Please note that this board contains an on-board WS2812 LED connected to
GPIO38
+and, by default, this config configures the RMT transmitter in the same
pin.</p>
+</section>
</section>
</section>
@@ -348,8 +369,8 @@ and USB activity. None of these are available for use by
software.</p>
</div>
</div>
<footer><div class="rst-footer-buttons" role="navigation"
aria-label="Footer">
- <a href="../esp32s3-devkit/index.html" class="btn btn-neutral
float-left" title="ESP32S3-DevKit" accesskey="p" rel="prev"><span class="fa
fa-arrow-circle-left" aria-hidden="true"></span> Previous</a>
- <a href="../esp32s3-korvo-2/index.html" class="btn btn-neutral
float-right" title="ESP32-S3-Korvo-2 V3.0" accesskey="n" rel="next">Next <span
class="fa fa-arrow-circle-right" aria-hidden="true"></span></a>
+ <a href="../esp32s3-korvo-2/index.html" class="btn btn-neutral
float-left" title="ESP32-S3-Korvo-2 V3.0" accesskey="p" rel="prev"><span
class="fa fa-arrow-circle-left" aria-hidden="true"></span> Previous</a>
+ <a href="../esp32s3-lhcbit/index.html" class="btn btn-neutral
float-right" title="esp32s3-lhcbit" accesskey="n" rel="next">Next <span
class="fa fa-arrow-circle-right" aria-hidden="true"></span></a>
</div>
<hr/>
diff --git
a/content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-lhcbit/index.html
b/content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-lhcbit/index.html
index fb1a6c0b56..d0291b21e2 100644
---
a/content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-lhcbit/index.html
+++
b/content/docs/latest/platforms/xtensa/esp32s3/boards/esp32s3-lhcbit/index.html
@@ -44,7 +44,7 @@
<link rel="index" title="Index" href="../../../../../genindex.html" />
<link rel="search" title="Search" href="../../../../../search.html" />
<link rel="next" title="Z16" href="../../../../z16/index.html" />
- <link rel="prev" title="ESP32-S3-Korvo-2 V3.0"
href="../esp32s3-korvo-2/index.html" />
+ <link rel="prev" title="ESP32-S3-LCD-EV"
href="../esp32s3-lcd-ev/index.html" />
</head>
<body class="wy-body-for-nav">
@@ -152,6 +152,7 @@
<li class="toctree-l5"><a class="reference internal"
href="../esp32s3-devkit/index.html">ESP32S3-DevKit</a></li>
<li class="toctree-l5"><a class="reference internal"
href="../esp32s3-eye/index.html">ESP32-S3-EYE</a></li>
<li class="toctree-l5"><a class="reference internal"
href="../esp32s3-korvo-2/index.html">ESP32-S3-Korvo-2 V3.0</a></li>
+<li class="toctree-l5"><a class="reference internal"
href="../esp32s3-lcd-ev/index.html">ESP32-S3-LCD-EV</a></li>
<li class="toctree-l5 current"><a class="current reference internal"
href="#">esp32s3-lhcbit</a></li>
</ul>
</li>
@@ -358,7 +359,7 @@ Where <subdir> is one of the following:
</div>
</div>
<footer><div class="rst-footer-buttons" role="navigation"
aria-label="Footer">
- <a href="../esp32s3-korvo-2/index.html" class="btn btn-neutral
float-left" title="ESP32-S3-Korvo-2 V3.0" accesskey="p" rel="prev"><span
class="fa fa-arrow-circle-left" aria-hidden="true"></span> Previous</a>
+ <a href="../esp32s3-lcd-ev/index.html" class="btn btn-neutral
float-left" title="ESP32-S3-LCD-EV" accesskey="p" rel="prev"><span class="fa
fa-arrow-circle-left" aria-hidden="true"></span> Previous</a>
<a href="../../../../z16/index.html" class="btn btn-neutral
float-right" title="Z16" accesskey="n" rel="next">Next <span class="fa
fa-arrow-circle-right" aria-hidden="true"></span></a>
</div>
diff --git a/content/docs/latest/platforms/xtensa/esp32s3/index.html
b/content/docs/latest/platforms/xtensa/esp32s3/index.html
index 319166bb22..2e41a9b975 100644
--- a/content/docs/latest/platforms/xtensa/esp32s3/index.html
+++ b/content/docs/latest/platforms/xtensa/esp32s3/index.html
@@ -172,6 +172,7 @@
<li class="toctree-l5"><a class="reference internal"
href="boards/esp32s3-devkit/index.html">ESP32S3-DevKit</a></li>
<li class="toctree-l5"><a class="reference internal"
href="boards/esp32s3-eye/index.html">ESP32-S3-EYE</a></li>
<li class="toctree-l5"><a class="reference internal"
href="boards/esp32s3-korvo-2/index.html">ESP32-S3-Korvo-2 V3.0</a></li>
+<li class="toctree-l5"><a class="reference internal"
href="boards/esp32s3-lcd-ev/index.html">ESP32-S3-LCD-EV</a></li>
<li class="toctree-l5"><a class="reference internal"
href="boards/esp32s3-lhcbit/index.html">esp32s3-lhcbit</a></li>
</ul>
</li>
@@ -753,6 +754,7 @@ Set the attribute <code class="docutils literal
notranslate"><span class="pre">_
<li class="toctree-l1"><a class="reference internal"
href="boards/esp32s3-devkit/index.html">ESP32S3-DevKit</a></li>
<li class="toctree-l1"><a class="reference internal"
href="boards/esp32s3-eye/index.html">ESP32-S3-EYE</a></li>
<li class="toctree-l1"><a class="reference internal"
href="boards/esp32s3-korvo-2/index.html">ESP32-S3-Korvo-2 V3.0</a></li>
+<li class="toctree-l1"><a class="reference internal"
href="boards/esp32s3-lcd-ev/index.html">ESP32-S3-LCD-EV</a></li>
<li class="toctree-l1"><a class="reference internal"
href="boards/esp32s3-lhcbit/index.html">esp32s3-lhcbit</a></li>
</ul>
</div>
diff --git a/content/docs/latest/searchindex.js
b/content/docs/latest/searchindex.js
index b92d6af521..20cd7d0f89 100644
--- a/content/docs/latest/searchindex.js
+++ b/content/docs/latest/searchindex.js
@@ -1 +1 @@
-Search.setIndex({"docnames": ["applications/audioutils/fmsynt/index",
"applications/audioutils/index", "applications/audioutils/mml_parser/index",
"applications/audioutils/nxaudio/index",
"applications/benchmarks/cachespeed/index",
"applications/benchmarks/coremark-pro/index",
"applications/benchmarks/coremark/index",
"applications/benchmarks/dhrystone/index", "applications/benchmarks/fio/index",
"applications/benchmarks/index", "applications/benchmarks/iozone/index",
"applications/bench [...]
\ No newline at end of file
+Search.setIndex({"docnames": ["applications/audioutils/fmsynt/index",
"applications/audioutils/index", "applications/audioutils/mml_parser/index",
"applications/audioutils/nxaudio/index",
"applications/benchmarks/cachespeed/index",
"applications/benchmarks/coremark-pro/index",
"applications/benchmarks/coremark/index",
"applications/benchmarks/dhrystone/index", "applications/benchmarks/fio/index",
"applications/benchmarks/index", "applications/benchmarks/iozone/index",
"applications/bench [...]
\ No newline at end of file
diff --git a/content/feed.xml b/content/feed.xml
index cfa2c2aaef..85bce43017 100644
--- a/content/feed.xml
+++ b/content/feed.xml
@@ -5,8 +5,8 @@
<description></description>
<link>/</link>
<atom:link href="/feed.xml" rel="self" type="application/rss+xml"/>
- <pubDate>Thu, 20 Feb 2025 00:28:11 +0000</pubDate>
- <lastBuildDate>Thu, 20 Feb 2025 00:28:11 +0000</lastBuildDate>
+ <pubDate>Fri, 21 Feb 2025 00:27:14 +0000</pubDate>
+ <lastBuildDate>Fri, 21 Feb 2025 00:27:14 +0000</lastBuildDate>
<generator>Jekyll v4.3.2</generator>
<item>
