yangsong8-a1 commented on issue #15960: URL: https://github.com/apache/nuttx/issues/15960#issuecomment-2716969928
> [@yangsong8-a1](https://github.com/yangsong8-a1) I had and fixed this issue: > > https://acassis.wordpress.com/2023/03/24/compiling-and-flashing-nuttx-on-sony-spresense-board/ > > You need to update the board bootloader, dnnrt, gnns, etc, otherwise this error will happen! @acassis @SPRESENSE thank you, refer to the method you provided, I tried updating multiple versions of loader: 1. This problem still occurs when loader version form 2.0.0 to 3.2.0. 2. When using version 3.3, this updating loader log does not appear. and the spresense:nsh configuration can be executed normally. But the rndis and rndis_composite configuration cannot enter nsh normally, and the usbmsc configuration cannot recognize the USB device. I try rndis_composite configuration, because it contain cdcacm. So the USB on my board is not running properly yet. I am using this board. Do I need to set any special hardware settings? For example, jumpers.  -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: commits-unsubscr...@nuttx.apache.org For queries about this service, please contact Infrastructure at: us...@infra.apache.org
