casaroli opened a new pull request, #3811: URL: https://github.com/apache/nuttx-apps/pull/3811
## Summary `examples/pmstress` walks the PM states in a fixed, timed sequence: active, idle and standby for `CONFIG_EXAMPLES_PMSTRESS_STEP_SECS` each, then the deepest state until power off, with a 1 s full-speed burst between the steps. A logging supply can then record the current of each state with no debugger or console attached; the bursts show where each step starts. On the rp23xx, `pmstress suspend <seconds>` also suspends to RAM with the `BOARDIOC_RP23XX_SUSPEND` boardctl() command of apache/nuttx#20491, and prints the wake source. That part is compiled only when the command is defined, so this example builds without that PR. ## Impact New example, off by default, depends on `CONFIG_PM`. ## Testing `tools/checkpatch.sh -c -u -m -g` passes. On a Pimoroni Pico Plus 2 W with apache/nuttx#20491: ``` nsh> pmstress suspend 5 pmstress: suspending to RAM for 5 s pmstress: back, returned 0, wake source 0x00000040 ``` I did not run the staircase itself in this round. -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
