This is an automated email from the ASF dual-hosted git repository. xiaoxiang781216 pushed a commit to branch master in repository https://gitbox.apache.org/repos/asf/nuttx.git
commit 18e3fe657036223c9a8d7e492bae24efc49620fb Author: iamadahn <[email protected]> AuthorDate: Thu Nov 5 15:55:00 2026 +0300 boards/arm/stm32g0/weact-stm32g0b1: update documentation Update the documentation with new configs for WeAct STM32G0B1 board Signed-off-by: iamadahn <[email protected]> --- .../arm/stm32g0/boards/weact-stm32g0b1/index.rst | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/Documentation/platforms/arm/stm32g0/boards/weact-stm32g0b1/index.rst b/Documentation/platforms/arm/stm32g0/boards/weact-stm32g0b1/index.rst index d2fb52fda0f..6311e8d0a00 100644 --- a/Documentation/platforms/arm/stm32g0/boards/weact-stm32g0b1/index.rst +++ b/Documentation/platforms/arm/stm32g0/boards/weact-stm32g0b1/index.rst @@ -21,7 +21,7 @@ The board features: - USB OTG FS with Type-C connector, - Serial Wire Debug header for use with an external SWD/JTAG adapter. -LEDs +LED ==== The WeAct STM32G0B1 board has only one software controllable LED on PC6. @@ -31,7 +31,7 @@ enabled. If enabled the LED is simply turned on when the board boots successfully, and is blinking on panic / assertion failed. -Buttons +Button ======= The WeAct STM32G0B1 board has only one button on PC13. @@ -56,3 +56,14 @@ nsh Configures the NuttShell (nsh) located at apps/examples/nsh. This configuration enables a serial console on UART3. + +userled +------- + +This is a config example to blink onboard led with userled driver and leds example. + +buttons +------- + +This is a config example to test onboard user button with input driver and buttons example in signal mode. +
