yangsong8-a1 opened a new pull request, #21717:
URL: https://github.com/apache/nuttx/pull/21717

   ## Summary
   - Replace the global critical section in the BT H4 UART pseudo device
     (drivers/serial/uart_bth4.c) with a per-device spinlock that protects
     the rx circular buffer and the poll waiter slots.
   - uart_bth4_read() drops the lock while it waits on recvsem and takes it
     again before it checks the buffer.
   ## Impact
   Only /dev/ttyHCI-style devices registered with uart_bth4_register()
   (including through uart_bth5 and bt_driver_register()). There is no API
   change. On SMP, the driver no longer serializes against unrelated users of
   the global critical section.
   ## Testing
   Ubuntu 22.04, gcc 13.1, aarch64-none-elf-gcc.
   - Builds with no warnings in uart_bth4.c: sim:btuart, sim:nsh, sim:smp,
     qemu-armv8a:nsh and qemu-armv8a:nsh_smp (with DRIVERS_BLUETOOTH +
     UART_BTH4).
   - A test app registers a fake bt_driver_s as /dev/ttyHCIt with
     uart_bth4_register(). It injects HCI events from a watchdog (interrupt
     context) and checks write/reassembly, blocking and non-blocking read,
     poll, buffer full (-ENOMEM) and a 3000-event stress test with a
     concurrent poll thread. Results are the same on sim:nsh, sim:smp (4 CPUs)
     and qemu-armv8a:nsh_smp (QEMU, -smp 2):
   ```
   bth4: write cmd ret 4 type 0 len 3 PASS
   bth4: split write sends 0/1 PASS
   bth4: nonblock empty read 0, bad type receive -22 PASS
   bth4: blocking read 9 h4 0x04 seq 0x1234 PASS
   bth4: poll ret 1 revents 0x1 read 9 PASS
   bth4: filled 899 events, drained 8091 bytes PASS
   bth4: stress injected 3000 dropped 0 read 3000 bad 0 polls 200 PASS
   ```
   


-- 
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.

To unsubscribe, e-mail: [email protected]

For queries about this service, please contact Infrastructure at:
[email protected]

Reply via email to