yangsong8-a1 opened a new pull request, #21851:
URL: https://github.com/apache/nuttx/pull/21851
## Summary
Add an upper half for Output Compare Units (`CONFIG_OCU`, `/dev/ocuN`).
An OCU channel compares a free-running counter with a threshold and, on a
match, can change an output pin and notify the application.
- ioctls: `OCUIOC_START`/`STOP`, `GETSTATUS`, `GETCOUNTER`,
`SETABSTHRESHOLD`, `SETRELTHRESHOLD`, `SETADVANCETHRESHOLD`,
`SETPINSTATE`, `SETPINACTION` and `OCUIOC_NOTIFICATION` (signal on
compare match). Unknown commands go to the lower half `ioctl`.
- Kernel code can register a match callback directly with
`OCU_SETCALLBACK()`, as with `TIMER_SETCALLBACK()`.
- New ioctl base `_OCUIOCBASE` (0x4b00), documentation in
`Documentation/os/drivers/character/timers/ocu.rst`.
The second commit adds `ocu.c` to the Make build, the third fixes nxstyle
errors.
## Impact
New framework, off by default. No lower half in this PR; the i.MX GPT
lower half follows in a separate PR.
## Testing
Ubuntu 22.04, gcc 13.1, aarch64-none-elf-gcc 13.2.
| Config | Result |
|---|---|
| sim:nsh + OCU (Make, and CMake for the first commit) | builds, 0 warnings |
| qemu-armv8a:nsh + OCU (Make and CMake) | builds, 0 warnings |
| sim:nsh + OCU, test program with a fake lower half; the compare match is
simulated with interrupts disabled | see the log below |
```
GETSTATUS ret=0 flags=0x4 counter=100
lower start
START ret=0
START again ret=-16
SETPINSTATE while running ret=-16
lower setpinaction(3)
SETPINACTION ret=0
GETCOUNTER ret=0 counter=100
SETABSTHRESHOLD ret=0 result=0
SETRELTHRESHOLD ret=0 threshold=150
SETADVANCETHRESHOLD ret=0 threshold=1150 result=1
lower setcallback(set)
lower notification(1)
NOTIFICATION(enable) ret=0
GETSTATUS ret=0 flags=0x7 threshold=1150
sigtimedwait ret=10 signo=10 value=1234
lower notification(0)
lower setcallback(NULL)
NOTIFICATION(disable) ret=0
sigtimedwait after disable ret=-1 errno=11
unknown ioctl ret=-25
lower stop
STOP ret=0
lower notification(0)
lower setcallback(NULL)
```
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: [email protected]
For queries about this service, please contact Infrastructure at:
[email protected]