raiden00pl opened a new pull request, #22026:
URL: https://github.com/apache/nuttx/pull/22026

     ## Summary
     
     - video: Add the Z16 depth pixel format.
     - video/v4l2_cap: Enumerate frame intervals per frame size.
       Entries that set a size or format now only match a request for it
       (this also filters the UVC host driver's per-size entries).
     - drivers/video: Add the ST VL53L5CX multizone ToF driver.
       V4L2 depth capture device (V4L2_PIX_FMT_Z16, mm): 8x8 at 1-15 Hz or
       4x4 at 1-60 Hz. The sensor INT output starts each frame read on the LP
       work queue. The sensor keeps its firmware in RAM; the build downloads
       it from ST's VL53L5CX ULD (X-CUBE-TOF1 v3.4.3, BSD-3-Clause), so the
       driver depends on ALLOW_BSD_COMPONENTS.
     - boards/stm32n6570-dk: Add the VL53L5CX ToF sensor.
       INT on PQ0, LPn on PQ5, /dev/video1. INT takes EXTI0, so the TAMP
       button has no interrupt when the sensor is enabled.
     
     ## Impact
       
     New driver, a new pixel format (Z16) and a fix in frame interval
     enumeration. No change for existing boards.
     
     ## Testing
     
     STM32N6570-DK, nsh + VIDEO_VL53L5CX (10 ms tick), V4L2 capture of
     /dev/video1:
     - first stream start (firmware write at 1 MHz I2C): 1.10 s
     - 8x8 at 15 Hz: 150/150 frames, 15.0 fps                                   
                                                                                
                                                                                
                                    
     - 4x4 at 60 Hz: 300/300 frames, 59.8 fps                                   
                                                                                
                                                                                
                                    
     - 4x4 at 1 Hz: 60/60 frames                                                
                                                                                
                                                                                
                                    
     - both buffers held for 500 ms: streaming resumes, 60/60 frames            
                                                                                
                                                                                
                                    
     - STREAMOFF: INT stops, the sensor stops ranging                           
                                                                                
                                                                                
                                    
     - 2/15 s frame interval: 24/24 frames at 7.9 fps 


-- 
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.

To unsubscribe, e-mail: [email protected]

For queries about this service, please contact Infrastructure at:
[email protected]

Reply via email to