cwespressif edited a comment on pull request #557: URL: https://github.com/apache/incubator-nuttx-apps/pull/557#issuecomment-759889713
> @cwespressif > > I tried this PR with esp32-devkitc but it seems that it's unstable. > > ``` > nsh> uname -a > NuttX 10.0.1 657088318a-dirty Jan 14 2021 09:33:40 xtensa esp32-devkitc > nsh> ifconfig > wlan0 Link encap:Ethernet HWaddr 3c:71:bf:8a:dd:10 at UP > inet addr:192.168.10.6 DRaddr:192.168.10.1 Mask:255.255.255.0 > > nsh> iperf -c 192.168.10.16 > IP: 192.168.10.6 > > mode=tcp-client sip=192.168.10.6:5001, dip=192.168.10.16:5001, interval=3, time=30 > W (43841) wifi:<ba-add>idx:0 (ifx:0, fe:b7:97:5a:a3:8a), tid:6, ssn:2, winSize:64 > W (45628) wifi:<ba-add>idx:1 (ifx:0, fe:b7:97:5a:a3:8a), tid:0, ssn:0, winSize:64 > > Interval Bandwidth > > 0- 3 sec, 0.48 Mbits/sec > 3- 6 sec, 0.00 Mbits/sec > 6- 9 sec, 0.00 Mbits/sec > 9- 12 sec, 0.00 Mbits/sec > 12- 15 sec, 0.00 Mbits/sec > 15- 18 sec, 0.00 Mbits/sec > 18- 21 sec, 0.00 Mbits/sec > 21- 24 sec, 0.00 Mbits/sec > 24- 27 sec, 0.00 Mbits/sec > 27- 30 sec, 0.00 Mbits/sec > ``` Hi @masayuki2009 I use the incubator-nuttx master version to test with this PR, the config is wapi which under esp32-devkitc, enable iperf example, the test result seems OK and stable, but your test looks like the device has stopped sending packets,could you provide a wireless packet capture?  ---------------------------------------------------------------- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. For queries about this service, please contact Infrastructure at: us...@infra.apache.org
