patacongo commented on issue #9501:
URL: https://github.com/apache/nuttx/issues/9501#issuecomment-1584575667
There are some general instructions for a few ARM platforms. I used the
SAMA5D4-EK in the past with the root file system on an SD card. I put
instructions in the board README.txt file:
Using SAMA5D with file system on SD Card
https://github.com/apache/nuttx/blob/master/boards/arm/sama5/sama5d4-ek/README.txt#L4091
I also noticed these:
Using qemu-system-arm:
https://github.com/apache/nuttx/blob/master/boards/arm/imx6/sabre-6quad/README.txt#L892
https://github.com/apache/nuttx/blob/master/boards/arm/imx6/sabre-6quad/README.txt#L929
You could also check the RISC-V board README files to see if instructioins
were provided:
boards/risc-v/litex/arty_a7/configs/knsh/defconfig:CONFIG_BUILD_KERNEL=y
boards/risc-v/mpfs/icicle/configs/knsh/defconfig:CONFIG_BUILD_KERNEL=y
boards/risc-v/qemu-rv/rv-virt/configs/knetnsh64/defconfig:CONFIG_BUILD_KERNEL=y
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: [email protected]
For queries about this service, please contact Infrastructure at:
[email protected]
