This is an automated email from the ASF dual-hosted git repository.
xiaoxiang pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/nuttx.git
The following commit(s) were added to refs/heads/master by this push:
new a4398b50c8 drivers/lcd/Kconfig: Fix Kconfig style
a4398b50c8 is described below
commit a4398b50c80e9aa709c921b8d5c2641eda2e3c27
Author: simbit18 <[email protected]>
AuthorDate: Mon Jun 19 12:55:55 2023 +0200
drivers/lcd/Kconfig: Fix Kconfig style
Remove TABs from Kconfig file
Add comments
---
drivers/lcd/Kconfig | 430 ++++++++++++++++++++++++++--------------------------
1 file changed, 215 insertions(+), 215 deletions(-)
diff --git a/drivers/lcd/Kconfig b/drivers/lcd/Kconfig
index 0d9d5d639d..ef271dea18 100644
--- a/drivers/lcd/Kconfig
+++ b/drivers/lcd/Kconfig
@@ -106,21 +106,21 @@ config LCD_APA102
default n
if LCD_APA102
- config LCD_APA102_XRES
- int "APA102 X Resolution"
- default 16
- ---help---
- Specifies the X resolution of the LCD.
-
- config LCD_APA102_YRES
- int "APA102 Y Resolution"
- default 16
- ---help---
- Specifies the Y resolution of the LCD.
-
- config LCD_APA102_FREQUENCY
- int "SPI Frequency"
- default 1000000
+config LCD_APA102_XRES
+ int "APA102 X Resolution"
+ default 16
+ ---help---
+ Specifies the X resolution of the LCD.
+
+config LCD_APA102_YRES
+ int "APA102 Y Resolution"
+ default 16
+ ---help---
+ Specifies the Y resolution of the LCD.
+
+config LCD_APA102_FREQUENCY
+ int "SPI Frequency"
+ default 1000000
endif # LCD_APA102
@@ -174,7 +174,7 @@ config P14201_FRAMEBUFFER
LCD framebuffer. This internal framebuffer support should not
be
enabled with CONFIG_LCD_FRAMBEBUFFER because this external
common
framebuffer interface will provide the necessary buffering.
-endif
+endif # LCD_P14201
config LCD_MAX7219
bool "Matrix of 8x8 LEDs controlled by MAX7219"
@@ -272,7 +272,7 @@ config UG9664HSWAG01_POWER
configuration should be defined. In this case the system must
provide an interface ug_power().
-endif
+endif # LCD_UG9664HSWAG01
config LCD_SH1106_OLED_132
bool "Generic 0.96'' OLED Display Module (SH1106/SSD1306)"
@@ -463,7 +463,7 @@ config LCD_SSD1351
if LCD_SSD1351
choice
- prompt "Interface"
+ prompt "SSD1351 Interface"
default SSD1351_SPI4WIRE
config SSD1351_PARALLEL8BIT
@@ -484,7 +484,7 @@ config SSD1351_SPI4WIRE
---help---
Enables support for the 4-wire SPI interface.
-endchoice
+endchoice # SSD1351 Interface
if SSD1351_SPI3WIRE || SSD1351_SPI4WIRE
@@ -632,49 +632,49 @@ config SSD1351_MSTRCONTRAST
---help---
Specifies the master contrast ratio in sixteenths.
-endif
+endif # LCD_SSD1351
config LCD_ST7735
bool "Sitronix ST7735 TFT Controller"
default n
if LCD_ST7735
- choice
- prompt "LCD Preset Resolutions"
- optional
+choice
+ prompt "LCD Preset Resolutions"
+ optional
- config LCD_ST7735_GM11
- bool "128x160"
+config LCD_ST7735_GM11
+ bool "128x160"
- config LCD_ST7735_GM00
- bool "132x162"
+config LCD_ST7735_GM00
+ bool "132x162"
- config LCD_ST7735_GM01
- bool "132x132"
+config LCD_ST7735_GM01
+ bool "132x132"
- endchoice
+endchoice # LCD Preset Resolutions
if !LCD_ST7735_GM00 && !LCD_ST7735_GM01 && !LCD_ST7735_GM11
- config LCD_ST7735_XRES
+config LCD_ST7735_XRES
int "ST7735 X Resolution"
default 128
---help---
Specifies the X resolution of the LCD.
- config LCD_ST7735_YRES
+config LCD_ST7735_YRES
int "ST7735 Y Resolution"
default 160
---help---
Specifies the Y resolution of the LCD.
- config LCD_ST7735_XOFFSET
+config LCD_ST7735_XOFFSET
int "ST7735 X Offset"
default 0
---help---
Specifies the X offset of the LCD.
- config LCD_ST7735_YOFFSET
+config LCD_ST7735_YOFFSET
int "ST7735 Y Offset"
default 0
---help---
@@ -682,21 +682,21 @@ if !LCD_ST7735_GM00 && !LCD_ST7735_GM01 &&
!LCD_ST7735_GM11
endif
- config LCD_ST7735_BGR
- bool "Swap R & B channel"
- default n
+config LCD_ST7735_BGR
+ bool "Swap R & B channel"
+ default n
- config LCD_ST7735_BPP
- int "Bit Per Pixel (12, 16 or 18)"
- default 16
+config LCD_ST7735_BPP
+ int "Bit Per Pixel (12, 16 or 18)"
+ default 16
- config LCD_ST7735_SPIMODE
- int "SPI Mode"
- default 0
+config LCD_ST7735_SPIMODE
+ int "SPI Mode"
+ default 0
- config LCD_ST7735_FREQUENCY
- int "SPI Frequency"
- default 3000000
+config LCD_ST7735_FREQUENCY
+ int "SPI Frequency"
+ default 3000000
endif # LCD_ST7735
@@ -705,56 +705,56 @@ config LCD_ST7789
default n
if LCD_ST7789
- config LCD_ST7789_XRES
- int "ST7789 X Resolution"
- default 240
- ---help---
- Specifies the X resolution of the LCD.
-
- config LCD_ST7789_YRES
- int "ST7789 Y Resolution"
- default 320
- ---help---
- Specifies the Y resolution of the LCD.
-
- config LCD_ST7789_XOFFSET
- int "ST7789 X Offset"
- default 0
- ---help---
- Specifies the X offset of the LCD.
-
- config LCD_ST7789_YOFFSET
- int "ST7789 Y Offset"
- default 0
- ---help---
- Specifies the Y offset of the LCD.
-
- config LCD_ST7789_MIRRORX
- bool "ST7789 Mirror X"
- default n
-
- config LCD_ST7789_MIRRORY
- bool "ST7789 Mirror Y"
- default n
-
- config LCD_ST7789_INVCOLOR
- bool "ST7789 Invert Color"
- default y
- ---help---
- Invert colors of the LCD display. This is useful for
implementations
- that assume that that colors are inverted by default.
-
- config LCD_ST7789_BPP
- int "Bit Per Pixel (12 or 16)"
- default 16
-
- config LCD_ST7789_SPIMODE
- int "SPI Mode"
- default 0
-
- config LCD_ST7789_FREQUENCY
- int "SPI Frequency"
- default 1000000
+config LCD_ST7789_XRES
+ int "ST7789 X Resolution"
+ default 240
+ ---help---
+ Specifies the X resolution of the LCD.
+
+config LCD_ST7789_YRES
+ int "ST7789 Y Resolution"
+ default 320
+ ---help---
+ Specifies the Y resolution of the LCD.
+
+config LCD_ST7789_XOFFSET
+ int "ST7789 X Offset"
+ default 0
+ ---help---
+ Specifies the X offset of the LCD.
+
+config LCD_ST7789_YOFFSET
+ int "ST7789 Y Offset"
+ default 0
+ ---help---
+ Specifies the Y offset of the LCD.
+
+config LCD_ST7789_MIRRORX
+ bool "ST7789 Mirror X"
+ default n
+
+config LCD_ST7789_MIRRORY
+ bool "ST7789 Mirror Y"
+ default n
+
+config LCD_ST7789_INVCOLOR
+ bool "ST7789 Invert Color"
+ default y
+ ---help---
+ Invert colors of the LCD display. This is useful for
implementations
+ that assume that that colors are inverted by default.
+
+config LCD_ST7789_BPP
+ int "Bit Per Pixel (12 or 16)"
+ default 16
+
+config LCD_ST7789_SPIMODE
+ int "SPI Mode"
+ default 0
+
+config LCD_ST7789_FREQUENCY
+ int "SPI Frequency"
+ default 1000000
endif # LCD_ST7789
@@ -763,45 +763,45 @@ config LCD_GC9A01
default n
if LCD_GC9A01
- config LCD_GC9A01_XRES
- int "GC9A01 X Resolution"
- default 240
- ---help---
- Specifies the X resolution of the LCD.
-
- config LCD_GC9A01_YRES
- int "GC9A01 Y Resolution"
- default 240
- ---help---
- Specifies the Y resolution of the LCD.
-
- config LCD_GC9A01_XOFFSET
- int "GC9A01 X Offset"
- default 0
- ---help---
- Specifies the X offset of the LCD.
-
- config LCD_GC9A01_YOFFSET
- int "GC9A01 Y Offset"
- default 0
- ---help---
- Specifies the Y offset of the LCD.
-
- config LCD_GC9A01_BGR
- bool "Swap R & B channel"
- default n
-
- config LCD_GC9A01_BPP
- int "Bit Per Pixel (12 or 16)"
- default 16
-
- config LCD_GC9A01_SPIMODE
- int "SPI Mode"
- default 0
-
- config LCD_GC9A01_FREQUENCY
- int "SPI Frequency"
- default 1000000
+config LCD_GC9A01_XRES
+ int "GC9A01 X Resolution"
+ default 240
+ ---help---
+ Specifies the X resolution of the LCD.
+
+config LCD_GC9A01_YRES
+ int "GC9A01 Y Resolution"
+ default 240
+ ---help---
+ Specifies the Y resolution of the LCD.
+
+config LCD_GC9A01_XOFFSET
+ int "GC9A01 X Offset"
+ default 0
+ ---help---
+ Specifies the X offset of the LCD.
+
+config LCD_GC9A01_YOFFSET
+ int "GC9A01 Y Offset"
+ default 0
+ ---help---
+ Specifies the Y offset of the LCD.
+
+config LCD_GC9A01_BGR
+ bool "Swap R & B channel"
+ default n
+
+config LCD_GC9A01_BPP
+ int "Bit Per Pixel (12 or 16)"
+ default 16
+
+config LCD_GC9A01_SPIMODE
+ int "SPI Mode"
+ default 0
+
+config LCD_GC9A01_FREQUENCY
+ int "SPI Frequency"
+ default 1000000
endif # LCD_GC9A01
@@ -810,53 +810,53 @@ config LCD_JD9851
default n
if LCD_JD9851
- config LCD_JD9851_XRES
- int "JD9851 X Resolution"
- default 240
- ---help---
- Specifies the X resolution of the LCD.
-
- config LCD_JD9851_YRES
- int "JD9851 Y Resolution"
- default 320
- ---help---
- Specifies the Y resolution of the LCD.
-
- config LCD_JD9851_XOFFSET
- int "JD9851 X Offset"
- default 0
- ---help---
- Specifies the X offset of the LCD.
-
- config LCD_JD9851_YOFFSET
- int "JD9851 Y Offset"
- default 0
- ---help---
- Specifies the Y offset of the LCD.
-
- config LCD_JD9851_BGR
- bool "Swap R & B channel"
- default n
-
- config LCD_JD9851_BPP
- int "Bit Per Pixel (16)"
- default 16
-
- config LCD_JD9851_SPIMODE
- int "SPI Mode"
- default 0
-
- config LCD_JD9851_FREQUENCY
- int "SPI Frequency"
- default 1000000
-
- config LCD_JD9851_INVERT
- bool "Enter into display inversion mode"
- default n
-
- config LCD_JD9851_TE
- bool "Tearing effect line on"
- default n
+config LCD_JD9851_XRES
+ int "JD9851 X Resolution"
+ default 240
+ ---help---
+ Specifies the X resolution of the LCD.
+
+config LCD_JD9851_YRES
+ int "JD9851 Y Resolution"
+ default 320
+ ---help---
+ Specifies the Y resolution of the LCD.
+
+config LCD_JD9851_XOFFSET
+ int "JD9851 X Offset"
+ default 0
+ ---help---
+ Specifies the X offset of the LCD.
+
+config LCD_JD9851_YOFFSET
+ int "JD9851 Y Offset"
+ default 0
+ ---help---
+ Specifies the Y offset of the LCD.
+
+config LCD_JD9851_BGR
+ bool "Swap R & B channel"
+ default n
+
+config LCD_JD9851_BPP
+ int "Bit Per Pixel (16)"
+ default 16
+
+config LCD_JD9851_SPIMODE
+ int "SPI Mode"
+ default 0
+
+config LCD_JD9851_FREQUENCY
+ int "SPI Frequency"
+ default 1000000
+
+config LCD_JD9851_INVERT
+ bool "Enter into display inversion mode"
+ default n
+
+config LCD_JD9851_TE
+ bool "Tearing effect line on"
+ default n
endif # LCD_JD9851
@@ -1058,7 +1058,7 @@ config UG2864AMBAG01_NINTERFACES
Specifies the number of physical UG-9664HSWAG01 devices that
will be
supported. NOTE: At present, this must be undefined or
defined to be 1.
-endif
+endif # LCD_UG2864AMBAG01
config LCD_SSD1289
bool "LCD Based on SSD1289 Controller"
@@ -1084,8 +1084,8 @@ config SSD1289_PROFILE2
config SSD1289_PROFILE3
bool "Profile 3"
-endchoice
-endif
+endchoice # SSD1289 Initialization Profile
+endif # LCD_SSD1289
config LCD_SHARP_MEMLCD
bool "Sharp Memory LCD Suite"
@@ -1114,7 +1114,7 @@ config MEMLCD_LS027B7DH01A
---help---
Selects the LS027B7DH01A model
-endchoice
+endchoice # Memory LCD Model
config MEMLCD_NINTERFACES
int "Number of physical Memory LCD devices"
@@ -1140,7 +1140,7 @@ config MEMLCD_SPI_FREQUENCY
---help---
Define to use a different bus frequency, FIXME DEFAULT VALUE OK?
-endif
+endif # LCD_SHARP_MEMLCD
choice
prompt "LCD Orientation"
@@ -1186,7 +1186,7 @@ config LCD_DYN_ORIENTATION
have the possibility to switch the orientation while runtime.
Orientation
is a parameter of lcdinitialize().
-endchoice
+endchoice # LCD Orientation
config LCD_LPM013M091A
bool "JDI LPM013M091A LCD Driver"
@@ -1204,29 +1204,29 @@ config LCD_ILI9225
LCD Single Chip Driver, ILI9225, ILI Technology Corp.
if LCD_ILI9225
- config LCD_ILI9225_XRES
- int "ILI9225 X Resolution"
- default 176
- ---help---
- Specifies the X resolution of the LCD.
-
- config LCD_ILI9225_YRES
- int "ILI9225 Y Resolution"
- default 220
- ---help---
- Specifies the Y resolution of the LCD.
-
- config LCD_ILI9225_BPP
- int "Bit Per Pixel (16)"
- default 16
-
- config LCD_ILI9225_SPIMODE
- int "SPI Mode"
- default 0
-
- config LCD_ILI9225_FREQUENCY
- int "SPI Frequency"
- default 1000000
+config LCD_ILI9225_XRES
+ int "ILI9225 X Resolution"
+ default 176
+ ---help---
+ Specifies the X resolution of the LCD.
+
+config LCD_ILI9225_YRES
+ int "ILI9225 Y Resolution"
+ default 220
+ ---help---
+ Specifies the Y resolution of the LCD.
+
+config LCD_ILI9225_BPP
+ int "Bit Per Pixel (16)"
+ default 16
+
+config LCD_ILI9225_SPIMODE
+ int "SPI Mode"
+ default 0
+
+config LCD_ILI9225_FREQUENCY
+ int "SPI Frequency"
+ default 1000000
endif # LCD_ILI9225
@@ -1282,7 +1282,7 @@ config LCD_ILI9340_IFACE0_RPORTRAIT
---help---
Define for "reverse portrait" orientation support.
-endchoice
+endchoice # LCD Orientation
choice
prompt "Color format"
@@ -1295,8 +1295,8 @@ config LCD_ILI9340_IFACE0_RGB565
---help---
16 bpp RGB565 color format
-endchoice
-endif
+endchoice # Color format
+endif # LCD_ILI9340_IFACE0
config LCD_ILI9340_IFACE1
bool "(2) LCD Display"
@@ -1633,7 +1633,6 @@ config LCD_SSD1680
Required SPI driver settings:
SPI_CMDDATA - Include support for cmd/data selection.
-
if LCD_SSD1680
choice
@@ -1668,6 +1667,7 @@ config SSD1680_FREQUENCY
---help---
Selects the SPI bus frequency used with the SSD1680 device.
Max for read mode is 2.5 MHz, for write mode is 20 HHz
+
endif # LCD_SSD1680
