annerajb commented on PR #10193: URL: https://github.com/apache/nuttx/pull/10193#issuecomment-1712951016
> @annerajb whats the correct way to build, you flash onto a micro sd card with tow boot installed and it should boot? Is there any way to format the memory card because just using the basic build commands it doesn't seem to be able to detect a partition table on the memory card > > git clone https://github.com/apache/nuttx.git > cd nuttx/ > ./tools/configure.sh pinephonepro/nsh > make > cp nuttx.bin Image > gzip Image > > and the .gz image is what I flash with balena etcher to sd card, seems to be latest > > Tow-Boot TPL 2022.07 > Channel 0: LPDDR4, 50MHz > BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB > Channel 1: LPDDR4, 50MHz > BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB > 256B stride > lpddr4_set_rate: change freq to 400000000 mhz 0, 1 > lpddr4_set_rate: change freq to 800000000 mhz 1, 0 > Trying to boot from BOOTROM > Returning to boot ROM... > > Tow-Boot SPL 2022.07 > Trying to boot from SPI > NOTICE: BL31: v2.6(release): > NOTICE: BL31: Built : 00:00:00, Jan 1 1980 > > > Tow-Boot 2022.07 006 [variant: spi] > > SoC: Rockchip rk3399 > Reset cause: POR > Model: Pine64 PinePhonePro > DRAM: 3.9 GiB > Initializing Pinephone Pro charger > PMIC: RK8180 (on=0x40, off=0x08) > Core: 324 devices, 34 uclasses, devicetree: separate > MMC: mmc@fe310000: 3, mmc@fe320000: 1, mmc@fe330000: 0 > Loading Environment from SPIFlash... SF: Detected gd25lq128e with page size 256 Bytes, erase size 4 KiB, total 16 MiB > *** Warning - bad CRC, using default environment > > In: serial > Out: serial > Err: serial > Model: Pine64 PinePhonePro > Net: No ethernet found. > starting USB... > Bus usb@fe380000: ehci_generic usb@fe380000: Failed to get clocks (ret=-19) > Port not available. > Bus usb@fe3a0000: USB OHCI 1.0 > Bus usb@fe3c0000: ehci_generic usb@fe3c0000: Failed to get clocks (ret=-19) > Port not available. > Bus usb@fe3e0000: USB OHCI 1.0 > scanning bus usb@fe3a0000 for devices... 1 USB Device(s) found > scanning bus usb@fe3e0000 for devices... 1 USB Device(s) found > scanning usb for storage devices... 0 Storage Device(s) found > Please press [ESCAPE] or [CTRL+C] to enter the boot menu. > off > off > switch to partitions #0, OK > mmc0(part 0) is current device > ** Invalid partition 1 ** > Couldn't find partition mmc 0:1 > switch to partitions #0, OK > mmc1 is current device > ** No partition table - mmc 1 ** > Couldn't find partition mmc 1:1 > > Device 0: unknown device > No ethernet found. > missing environment variable: pxeuuid > Retrieving file: pxelinux.cfg/00000000 > No ethernet found. > Retrieving file: pxelinux.cfg/0000000 > No ethernet found. > Retrieving file: pxelinux.cfg/000000 > No ethernet found. > Retrieving file: pxelinux.cfg/00000 > No ethernet found. > Retrieving file: pxelinux.cfg/0000 > No ethernet found. > Retrieving file: pxelinux.cfg/000 > No ethernet found. > Retrieving file: pxelinux.cfg/00 > No ethernet found. > Retrieving file: pxelinux.cfg/0 > No ethernet found. > Retrieving file: pxelinux.cfg/default-arm-rk3399-pinephone-pro-rk3399 > No ethernet found. > Retrieving file: pxelinux.cfg/default-arm-rk3399 > No ethernet found. > Retrieving file: pxelinux.cfg/default-arm > No ethernet found. > Retrieving file: pxelinux.cfg/default > No ethernet found. > Config file not found > No ethernet found. > No ethernet found. > SF: Detected gd25lq128e with page size 256 Bytes, erase size 4 KiB, total 16 MiB > device 0 offset 0xffe000, size 0x2000 > SF: 8192 bytes @ 0xffe000 Read: OK > ## Executing script at 00500000 > Wrong image format for "source" command > SCRIPT FAILED: continuing... > > ERROR: Could not boot anything from distro_bootcmd. > No I flashed a random pinephone pro image that didn't use a uefi boot and modified the .conf file from grub to specify the copied over image.gz Will paste a example later today and try to find what's the distro I flashed with balena -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
