This is an automated email from the ASF dual-hosted git repository.
xiaoxiang pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/nuttx.git
The following commit(s) were added to refs/heads/master by this push:
new c8f9e409dc ioctl: add definitions related to ethtool
c8f9e409dc is described below
commit c8f9e409dc88c3b3500defc7c64126df0e4180f3
Author: zhanghongyu <zhanghon...@xiaomi.com>
AuthorDate: Wed Nov 1 14:35:48 2023 +0800
ioctl: add definitions related to ethtool
We reuse the linux platform code when adapting the matter library, in order
to compile through, so first add the ethtool related definition
Signed-off-by: zhanghongyu <zhanghon...@xiaomi.com>
---
include/net/if.h | 2 +
include/nuttx/ethtool.h | 223 ++++++++++++++++++++++++++++++++++++++++++++++
include/nuttx/net/ioctl.h | 4 +
3 files changed, 229 insertions(+)
diff --git a/include/net/if.h b/include/net/if.h
index 1d143f5208..5a604ad979 100644
--- a/include/net/if.h
+++ b/include/net/if.h
@@ -276,6 +276,7 @@ struct ifreq
struct mii_ioctl_data_s ifru_mii_data; /* MII request data */
struct can_ioctl_data_s ifru_can_data; /* CAN bitrate request
data */
struct can_ioctl_filter_s ifru_can_filter; /* CAN filter request data
*/
+ FAR void *ifru_data; /* For use by interface */
} ifr_ifru;
};
@@ -293,6 +294,7 @@ struct ifreq
#define ifr_mii_reg_num ifr_ifru.ifru_mii_data.reg_num /* PHY register
address */
#define ifr_mii_val_in ifr_ifru.ifru_mii_data.val_in /* PHY input data
*/
#define ifr_mii_val_out ifr_ifru.ifru_mii_data.val_out /* PHY output
data */
+#define ifr_data ifr_ifru.ifru_data /* for use by
interface */
/* Used only with the SIOCGIFCONF IOCTL command */
diff --git a/include/nuttx/ethtool.h b/include/nuttx/ethtool.h
new file mode 100644
index 0000000000..1d0c3191f6
--- /dev/null
+++ b/include/nuttx/ethtool.h
@@ -0,0 +1,223 @@
+/****************************************************************************
+ * include/nuttx/ethtool.h
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements. See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership. The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+#ifndef __INCLUDE_NUTTX_ETHTOOL_H
+#define __INCLUDE_NUTTX_ETHTOOL_H
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* CMDs currently supported */
+#define ETHTOOL_GSET 0x00000001 /* DEPRECATED, Get settings. \
+ * Please use ETHTOOL_GLINKSETTINGS \
+ **/
+#define ETHTOOL_SSET 0x00000002 /* DEPRECATED, Set settings. \
+ * Please use ETHTOOL_SLINKSETTINGS \
+ **/
+#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */
+#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */
+#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */
+#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */
+#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */
+#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */
+#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */
+
+/* Get link status for host, i.e. whether the interface *and* the
+ * physical port (if there is one) are up (ethtool_value).
+ **/
+
+#define ETHTOOL_GLINK 0x0000000a
+#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */
+#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */
+#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */
+#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */
+#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */
+#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */
+#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */
+#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */
+#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable
(ethtool_value) */
+#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable
(ethtool_value) */
+#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable
(ethtool_value) */
+#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable
(ethtool_value) */
+#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable \
+ * (ethtool_value) \
+ **/
+#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable \
+ * (ethtool_value). \
+ **/
+#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */
+#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */
+#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */
+#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */
+#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */
+#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */
+#define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */
+#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */
+#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */
+#define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */
+#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */
+#define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */
+#define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */
+#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */
+#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */
+#define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */
+#define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */
+#define ETHTOOL_GGRO 0x0000002b /* Get GRO enable (ethtool_value) */
+#define ETHTOOL_SGRO 0x0000002c /* Set GRO enable (ethtool_value) */
+#define ETHTOOL_GRXRINGS 0x0000002d /* Get RX rings available for LB */
+#define ETHTOOL_GRXCLSRLCNT 0x0000002e /* Get RX class rule count */
+#define ETHTOOL_GRXCLSRULE 0x0000002f /* Get RX classification rule */
+#define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */
+#define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */
+#define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */
+#define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */
+#define ETHTOOL_RESET 0x00000034 /* Reset hardware */
+#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */
+#define ETHTOOL_GRXNTUPLE 0x00000036 /* deprecated */
+#define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */
+#define ETHTOOL_GRXFHINDIR 0x00000038 /* Get RX flow hash indir'n table */
+#define ETHTOOL_SRXFHINDIR 0x00000039 /* Set RX flow hash indir'n table */
+#define ETHTOOL_GFEATURES 0x0000003a /* Get device offload settings */
+#define ETHTOOL_SFEATURES 0x0000003b /* Change device offload settings */
+#define ETHTOOL_GCHANNELS 0x0000003c /* Get no of channels */
+#define ETHTOOL_SCHANNELS 0x0000003d /* Set no of channels */
+#define ETHTOOL_SET_DUMP 0x0000003e /* Set dump settings */
+#define ETHTOOL_GET_DUMP_FLAG 0x0000003f /* Get dump settings */
+#define ETHTOOL_GET_DUMP_DATA 0x00000040 /* Get dump data */
+#define ETHTOOL_GET_TS_INFO 0x00000041 /* Get time stamping and PHC info */
+#define ETHTOOL_GMODULEINFO 0x00000042 /* Get plug-in module information */
+#define ETHTOOL_GMODULEEEPROM 0x00000043 /* Get plug-in module eeprom */
+#define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */
+#define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */
+#define ETHTOOL_GRSSH 0x00000046 /* Get RX flow hash configuration */
+#define ETHTOOL_SRSSH 0x00000047 /* Set RX flow hash configuration */
+#define ETHTOOL_GTUNABLE 0x00000048 /* Get tunable configuration */
+#define ETHTOOL_STUNABLE 0x00000049 /* Set tunable configuration */
+#define ETHTOOL_GPHYSTATS 0x0000004a /* get PHY-specific statistics */
+#define ETHTOOL_PERQUEUE 0x0000004b /* Set per queue options */
+#define ETHTOOL_GLINKSETTINGS 0x0000004c /* Get ethtool_link_settings */
+#define ETHTOOL_SLINKSETTINGS 0x0000004d /* Set ethtool_link_settings */
+#define ETHTOOL_PHY_GTUNABLE 0x0000004e /* Get PHY tunable configuration */
+#define ETHTOOL_PHY_STUNABLE 0x0000004f /* Set PHY tunable configuration */
+#define ETHTOOL_GFECPARAM 0x00000050 /* Get FEC settings */
+#define ETHTOOL_SFECPARAM 0x00000051 /* Set FEC settings */
+
+/* Duplex, half or full. */
+
+#define DUPLEX_HALF 0x00
+#define DUPLEX_FULL 0x01
+#define DUPLEX_UNKNOWN 0xff
+
+/****************************************************************************
+ * Public Type Definitions
+ ****************************************************************************/
+
+/**
+ * struct ethtool_cmd - DEPRECATED, link control and status
+ * This structure is DEPRECATED, please use struct ethtool_link_settings.
+ * @cmd: Command number = %ETHTOOL_GSET or %ETHTOOL_SSET
+ * @supported: Bitmask of %SUPPORTED_* flags for the link modes,
+ * physical connectors and other link features for which the
+ * interface supports autonegotiation or auto-detection.
+ * Read-only.
+ * @advertising: Bitmask of %ADVERTISED_* flags for the link modes,
+ * physical connectors and other link features that are
+ * advertised through autonegotiation or enabled for
+ * auto-detection.
+ * @speed: Low bits of the speed, 1Mb units, 0 to INT_MAX or SPEED_UNKNOWN
+ * @duplex: Duplex mode; one of %DUPLEX_*
+ * @port: Physical connector type; one of %PORT_*
+ * @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not
+ * applicable. For clause 45 PHYs this is the PRTAD.
+ * @transceiver: Historically used to distinguish different possible
+ * PHY types, but not in a consistent way. Deprecated.
+ * @autoneg: Enable/disable autonegotiation and auto-detection;
+ * either %AUTONEG_DISABLE or %AUTONEG_ENABLE
+ * @mdio_support: Bitmask of %ETH_MDIO_SUPPORTS_* flags for the MDIO
+ * protocols supported by the interface; 0 if unknown.
+ * Read-only.
+ * @maxtxpkt: Historically used to report TX IRQ coalescing; now
+ * obsoleted by &struct ethtool_coalesce. Read-only; deprecated.
+ * @maxrxpkt: Historically used to report RX IRQ coalescing; now
+ * obsoleted by &struct ethtool_coalesce. Read-only; deprecated.
+ * @speed_hi: High bits of the speed, 1Mb units, 0 to INT_MAX or
+ * SPEED_UNKNOWN
+ * @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of
+ * %ETH_TP_MDI_*. If the status is unknown or not applicable, the
+ * value will be %ETH_TP_MDI_INVALID. Read-only.
+ * @eth_tp_mdix_ctrl: Ethernet twisted pair MDI(-X) control; one of
+ * %ETH_TP_MDI_*. If MDI(-X) control is not implemented, reads
+ * yield %ETH_TP_MDI_INVALID and writes may be ignored or rejected.
+ * When written successfully, the link should be renegotiated if
+ * necessary.
+ * @lp_advertising: Bitmask of %ADVERTISED_* flags for the link modes
+ * and other link features that the link partner advertised
+ * through autonegotiation; 0 if unknown or not applicable.
+ * Read-only.
+ *
+ * The link speed in Mbps is split between @speed and @speed_hi. Use
+ * the ethtool_cmd_speed() and ethtool_cmd_speed_set() functions to
+ * access it.
+ *
+ * If autonegotiation is disabled, the speed and @duplex represent the
+ * fixed link mode and are writable if the driver supports multiple
+ * link modes. If it is enabled then they are read-only; if the link
+ * is up they represent the negotiated link mode; if the link is down,
+ * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and
+ * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode.
+ *
+ * Some hardware interfaces may have multiple PHYs and/or physical
+ * connectors fitted or do not allow the driver to detect which are
+ * fitted. For these interfaces @port and/or @phy_address may be
+ * writable, possibly dependent on @autoneg being %AUTONEG_DISABLE.
+ * Otherwise, attempts to write different values may be ignored or
+ * rejected.
+ *
+ * Users should assume that all fields not marked read-only are
+ * writable and subject to validation by the driver. They should use
+ * %ETHTOOL_GSET to get the current values before making specific
+ * changes and then applying them with %ETHTOOL_SSET.
+ *
+ * Deprecated fields should be ignored by both users and drivers.
+ **/
+
+struct ethtool_cmd
+{
+ uint32_t cmd;
+ uint32_t supported;
+ uint32_t advertising;
+ uint16_t speed;
+ uint8_t duplex;
+ uint8_t port;
+ uint8_t phy_address;
+ uint8_t transceiver;
+ uint8_t autoneg;
+ uint8_t mdio_support;
+ uint32_t maxtxpkt;
+ uint32_t maxrxpkt;
+ uint16_t speed_hi;
+ uint8_t eth_tp_mdix;
+ uint8_t eth_tp_mdix_ctrl;
+ uint32_t lp_advertising;
+ uint32_t reserved[2];
+};
+
+#endif
diff --git a/include/nuttx/net/ioctl.h b/include/nuttx/net/ioctl.h
index 69e12dec76..049d12ca5d 100644
--- a/include/nuttx/net/ioctl.h
+++ b/include/nuttx/net/ioctl.h
@@ -136,6 +136,10 @@
#define SIOCGIFBR _SIOC(0x003A) /* Bridging support */
#define SIOCSIFBR _SIOC(0x003B) /* Set bridging options */
+/* ETH Tool calls ***********************************************************/
+
+#define SIOCETHTOOL _SIOC(0x003D) /* Ethtool interface */
+
/****************************************************************************
* Public Type Definitions
****************************************************************************/
