This is an automated email from the ASF dual-hosted git repository.
xiaoxiang pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/nuttx.git
The following commit(s) were added to refs/heads/master by this push:
new 8fa6a29503 Fix Kconfig style
8fa6a29503 is described below
commit 8fa6a295036996c8b9b93e00894ea14133f015a5
Author: simbit18 <[email protected]>
AuthorDate: Wed Nov 8 12:15:38 2023 +0100
Fix Kconfig style
Remove extra TABs
Remove spaces from Kconfig
Add comments
---
arch/arm/src/at32/Kconfig | 4 +---
arch/arm/src/imxrt/Kconfig | 2 +-
arch/arm/src/sama5/Kconfig | 6 +++---
arch/xtensa/src/esp32s2/Kconfig | 2 +-
boards/Kconfig | 8 ++++----
boards/risc-v/litex/arty_a7/Kconfig | 4 ++--
boards/xtensa/esp32s3/esp32s3-eye/Kconfig | 2 +-
boards/xtensa/esp32s3/esp32s3-lcd-ev/Kconfig | 6 +++---
8 files changed, 16 insertions(+), 18 deletions(-)
diff --git a/arch/arm/src/at32/Kconfig b/arch/arm/src/at32/Kconfig
index 5fce0ed654..2ad9180f8f 100644
--- a/arch/arm/src/at32/Kconfig
+++ b/arch/arm/src/at32/Kconfig
@@ -10,7 +10,6 @@ choice
default ARCH_CHIP_AT32F437VM
depends on ARCH_CHIP_AT32
-
config ARCH_CHIP_AT32F437VM
bool "AT32F437VM"
select AT32_AT32F43XX
@@ -37,7 +36,7 @@ config ARCH_CHIP_AT32F437RG
select AT32_AT32F43XX
select AT32_AT32F437
---help---
- AT32F43X 64-pin , 1024KB FLASH, 384KB SRAM
+ AT32F43X 64-pin , 1024KB FLASH, 384KB SRAM
config ARCH_CHIP_AT32F435VM
bool "AT32F435VM"
@@ -1067,7 +1066,6 @@ config AT32_NOEXT_VECTORS
Sometimes you may not need any Vector support beyond SysTick
and wish to save memory. This applies only to ARMv7-M
architectures.
-
choice
prompt "JTAG Configuration"
default AT32_JTAG_DISABLE
diff --git a/arch/arm/src/imxrt/Kconfig b/arch/arm/src/imxrt/Kconfig
index b7017a7b06..ff29185c11 100644
--- a/arch/arm/src/imxrt/Kconfig
+++ b/arch/arm/src/imxrt/Kconfig
@@ -183,7 +183,7 @@ config IMXRT_APP_FORMAT_MCUBOOT
select IMXRT_HAVE_OTA_PARTITION
depends on EXPERIMENTAL
---help---
- The MCUboot support of loading the firmware images.
+ The MCUboot support of loading the firmware images.
comment "MCUboot support depends on CONFIG_EXPERIMENTAL"
depends on !EXPERIMENTAL
diff --git a/arch/arm/src/sama5/Kconfig b/arch/arm/src/sama5/Kconfig
index f290565b34..f128387f36 100644
--- a/arch/arm/src/sama5/Kconfig
+++ b/arch/arm/src/sama5/Kconfig
@@ -1092,13 +1092,13 @@ choice
TRAILING EDGE: The signal is single-ended.
If bit NON_OVERLAP is cleared, the signal is sent to
CLASSD_L0 and CLASSD_R0.
-
+
If bit NON_OVERLAP is set, the signal is sent to
CLASSD_L0/L1 and CLASSD_R0/R1.
UNIFORM: The signal is differential.
If bit NON_OVERLAP is cleared, the signal is sent to
CLASSD_L0/L2 and CLASSD_R0/R2.
-
+
If bit NON_OVERLAP is set, the signal is sent to
CLASSD_L0/L1/L2/L3 and CLASSD_R0/R1/R2/R3.
@@ -1109,7 +1109,7 @@ config SAMA5D2_CLASSD_PWM_UNIFORM
bool "Uniform"
endchoice # Class D PWM Modulation Type
-
+
config SAMA5D2_CLASSD_NON_OVERLAP_MODE
bool "Non-overlapping Circuit Enable (NON_OVERLAP)"
default n
diff --git a/arch/xtensa/src/esp32s2/Kconfig b/arch/xtensa/src/esp32s2/Kconfig
index 625ea79ccd..12e56a62eb 100644
--- a/arch/xtensa/src/esp32s2/Kconfig
+++ b/arch/xtensa/src/esp32s2/Kconfig
@@ -865,7 +865,7 @@ comment "General storage MTD configuration"
config ESP32S2_MTD
bool "MTD driver"
- default y
+ default y
select MTD
select MTD_BYTE_WRITE
select MTD_PARTITION
diff --git a/boards/Kconfig b/boards/Kconfig
index 0619819d7e..d956a3c5c6 100644
--- a/boards/Kconfig
+++ b/boards/Kconfig
@@ -1721,7 +1721,7 @@ config ARCH_BOARD_LINUM_STM32H753BI
select ARCH_HAVE_BUTTONS
---help---
The Linum board is based on the STMicro STM32H753BI MCU.
-
+
config ARCH_BOARD_NUCLEO_L152RE
bool "STM32L152 Nucleo L152RE"
depends on ARCH_CHIP_STM32L152RE
@@ -3064,7 +3064,7 @@ config ARCH_BOARD
default "esp32-pico-kit" if ARCH_BOARD_ESP32_PICO_KIT
default "esp32-sparrow-kit" if ARCH_BOARD_ESP32_SPARROWKIT
default "esp32-wrover-kit" if ARCH_BOARD_ESP32_WROVERKIT
- default "esp32-2432S028"
if ARCH_BOARD_ESP32_2432S028
+ default "esp32-2432S028" if ARCH_BOARD_ESP32_2432S028
default "esp32c3-devkit" if ARCH_BOARD_ESP32C3_DEVKIT
default "esp32c3-devkit-rust-1" if ARCH_BOARD_ESP32C3_DEVKIT_RUST1
default "esp32c3-generic" if ARCH_BOARD_ESP32C3_GENERIC
@@ -3337,7 +3337,7 @@ config ARCH_BOARD
default "xx3823" if ARCH_BOARD_XX3823
default "s698pm-dkit" if ARCH_BOARD_S698PM_DKIT
default "hpm6750evk2" if ARCH_BOARD_HPM6750EVK2
- default "at32f437-mini" if ARCH_BOARD_AT32F437_MINI
+ default "at32f437-mini" if ARCH_BOARD_AT32F437_MINI
comment "Common Board Options"
@@ -4271,7 +4271,7 @@ config ARCH_BOARD_COMMON
bool "Board common logic"
default n
---help---
- Board common logic located in each board/common folder.
+ Board common logic located in each board/common folder.
if ARCH_BOARD_COMMON
if ARCH_CHIP_ESP32
diff --git a/boards/risc-v/litex/arty_a7/Kconfig
b/boards/risc-v/litex/arty_a7/Kconfig
index 7977b985b2..4109837f08 100644
--- a/boards/risc-v/litex/arty_a7/Kconfig
+++ b/boards/risc-v/litex/arty_a7/Kconfig
@@ -67,8 +67,8 @@ config LITEX_APPLICATION_RAMDISK
bool "Use application ramdisk"
depends on BUILD_KERNEL
---help---
- The application ramdisk is currently only intended only to hold
+ The application ramdisk is currently only intended only to hold
application elfs in the romfs format. These applications must
loaded
externally into ram through litex_term, or similar method.
-endif
+endif # ARCH_BOARD_ARTY_A7
diff --git a/boards/xtensa/esp32s3/esp32s3-eye/Kconfig
b/boards/xtensa/esp32s3/esp32s3-eye/Kconfig
index d533243d3e..51df4a13d5 100644
--- a/boards/xtensa/esp32s3/esp32s3-eye/Kconfig
+++ b/boards/xtensa/esp32s3/esp32s3-eye/Kconfig
@@ -57,6 +57,6 @@ config ESP32S3_EYE_LCD
select LCD_DEV
select LCD_ST7789
---help---
- Enable board LCD support, IC is LCD_ST7789V.
+ Enable board LCD support, IC is LCD_ST7789V.
endif # ARCH_BOARD_ESP32S3_EYE
diff --git a/boards/xtensa/esp32s3/esp32s3-lcd-ev/Kconfig
b/boards/xtensa/esp32s3/esp32s3-lcd-ev/Kconfig
index 01a4b2e000..3d26b68551 100644
--- a/boards/xtensa/esp32s3/esp32s3-lcd-ev/Kconfig
+++ b/boards/xtensa/esp32s3/esp32s3-lcd-ev/Kconfig
@@ -58,7 +58,7 @@ config ESP32S3_BOARD_IOEXPANDER
default n
depends on ESP32S3_BOARD_I2C
---help---
- Enable board IO expander support, IC is TC9554.
+ Enable board IO expander support, IC is TC9554.
config ESP32S3_BOARD_LCD
bool "Enable Board LCD"
@@ -66,13 +66,13 @@ config ESP32S3_BOARD_LCD
depends on ESP32S3_LCD
select ESP32S3_BOARD_IOEXPANDER
---help---
- Enable board LCD support, IC is GC9503CV.
+ Enable board LCD support, IC is GC9503CV.
config ESP32S3_BOARD_TOUCHPAD
bool "Enable Board Touchpad"
default n
depends on ESP32S3_BOARD_I2C
---help---
- Enable board touchpad support, IC is FT5X06.
+ Enable board touchpad support, IC is FT5X06.
endif # ARCH_BOARD_ESP32S3_LCD_EV
