This is an automated email from the ASF dual-hosted git repository.
mseidel pushed a commit to branch AOO41X
in repository https://gitbox.apache.org/repos/asf/openoffice.git
The following commit(s) were added to refs/heads/AOO41X by this push:
new 3c0d14c Re-enable adapted texts for NSIS installer.
3c0d14c is described below
commit 3c0d14cb62bf956bd654028d32598f68071d2c69
Author: mseidel <[email protected]>
AuthorDate: Fri May 21 20:56:47 2021 +0200
Re-enable adapted texts for NSIS installer.
This fixes https://bz.apache.org/ooo/show_bug.cgi?id=127628
---
main/solenv/bin/modules/installer/download.pm | 740 +++++++++++++-------------
1 file changed, 372 insertions(+), 368 deletions(-)
diff --git a/main/solenv/bin/modules/installer/download.pm
b/main/solenv/bin/modules/installer/download.pm
index 64fb417..13ac54b 100644
--- a/main/solenv/bin/modules/installer/download.pm
+++ b/main/solenv/bin/modules/installer/download.pm
@@ -1,5 +1,5 @@
#**************************************************************
-#
+#
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements. See the NOTICE file
# distributed with this work for additional information
@@ -7,16 +7,16 @@
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License. You may obtain a copy of the License at
-#
+#
# http://www.apache.org/licenses/LICENSE-2.0
-#
+#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied. See the License for the
# specific language governing permissions and limitations
# under the License.
-#
+#
#**************************************************************
@@ -34,7 +34,7 @@ use installer::systemactions;
use strict;
-BEGIN { # This is needed so that cygwin's perl evaluates ACLs
+BEGIN { # This is needed so that Cygwin's perl evaluates ACLs
# (needed for correctly evaluating the -x test.)
if( $^O =~ /cygwin/i ) {
require filetest; import filetest "access";
@@ -42,19 +42,19 @@ BEGIN { # This is needed so that cygwin's perl evaluates
ACLs
}
##################################################################
-# Including the lowercase product name into the script template
+# Including the lowercase product name into the script template
##################################################################
sub put_productname_into_script
{
my ($scriptfile, $variableshashref) = @_;
-
+
my $productname = $variableshashref->{'PRODUCTNAME'};
$productname = lc($productname);
$productname =~ s/\.//g; # openoffice.org -> openofficeorg
$productname =~ s/\s*//g;
- $installer::logger::Lang->printf("Adding productname %s into download
shell script\n", $productname);
+ $installer::logger::Lang->printf("Adding productname %s into download
shell script\n", $productname);
for ( my $i = 0; $i <= $#{$scriptfile}; $i++ )
{
@@ -63,25 +63,25 @@ sub put_productname_into_script
}
#########################################################
-# Including the linenumber into the script template
+# Including the linenumber into the script template
#########################################################
sub put_linenumber_into_script
{
my ( $scriptfile ) = @_;
-
- my $linenumber = $#{$scriptfile} + 2;
- $installer::logger::Lang->printf("Adding linenumber %d into download shell
script\n", $linenumber);
+ my $linenumber = $#{$scriptfile} + 2;
+
+ $installer::logger::Lang->printf("Adding linenumber %d into download
shell script\n", $linenumber);
for ( my $i = 0; $i <= $#{$scriptfile}; $i++ )
{
${$scriptfile}[$i] =~ s/LINENUMBERPLACEHOLDER/$linenumber/;
- }
+ }
}
#########################################################
-# Determining the name of the new scriptfile
+# Determining the name of the new scriptfile
#########################################################
sub determine_scriptfile_name
@@ -92,35 +92,35 @@ sub determine_scriptfile_name
$filename = $filename . $installer::globals::downloadfileextension;
$installer::globals::downloadfilename = $filename;
- $installer::logger::Lang->printf("Setting download shell script file name
to %s\n", $filename);
+ $installer::logger::Lang->printf("Setting download shell script file
name to %s\n", $filename);
return $filename;
}
#########################################################
-# Saving the script file in the installation directory
+# Saving the script file in the installation directory
#########################################################
sub save_script_file
{
my ($directory, $newscriptfilename, $scriptfile) = @_;
-
+
$newscriptfilename = $directory . $installer::globals::separator .
$newscriptfilename;
installer::files::save_file($newscriptfilename, $scriptfile);
- $installer::logger::Lang->printf("Saving script file %s\n",
$newscriptfilename);
+ $installer::logger::Lang->printf("Saving script file %s\n",
$newscriptfilename);
if ( ! $installer::globals::iswindowsbuild )
{
my $localcall = "chmod 775 $newscriptfilename \>\/dev\/null
2\>\&1";
system($localcall);
}
-
+
return $newscriptfilename;
}
#########################################################
-# Including checksum and size into script file
+# Including checksum and size into script file
#########################################################
sub put_checksum_and_size_into_script
@@ -129,30 +129,30 @@ sub put_checksum_and_size_into_script
my $checksum = "";
my $size = "";
-
- if ( $sumout =~ /^\s*(\d+)\s+(\d+)\s*$/ )
+
+ if ( $sumout =~ /^\s*(\d+)\s+(\d+)\s*$/ )
{
$checksum = $1;
- $size = $2;
+ $size = $2;
}
else
{
installer::exiter::exit_program("ERROR: Incorrect return value
from /usr/bin/sum: $sumout", "put_checksum_and_size_into_script");
}
- $installer::logger::Lang->printf(
- "Adding checksum %s and size %s into download shell script\n",
$checksum, $size);
+ $installer::logger::Lang->printf(
+ "Adding checksum %s and size %s into download shell script\n",
$checksum, $size);
for ( my $i = 0; $i <= $#{$scriptfile}; $i++ )
{
${$scriptfile}[$i] =~ s/CHECKSUMPLACEHOLDER/$checksum/;
${$scriptfile}[$i] =~ s/DISCSPACEPLACEHOLDER/$size/;
}
-
+
}
#########################################################
-# Calling md5sum
+# Calling md5sum
#########################################################
sub call_md5sum
@@ -160,11 +160,11 @@ sub call_md5sum
my ($filename) = @_;
my $md5sumfile = "/usr/bin/md5sum";
-
+
if ( ! -f $md5sumfile ) { installer::exiter::exit_program("ERROR: No
file /usr/bin/md5sum", "call_md5sum"); }
-
+
my $systemcall = "$md5sumfile $filename |";
-
+
my $md5sumoutput = "";
open (SUM, "$systemcall");
@@ -173,31 +173,31 @@ sub call_md5sum
my $returnvalue = $?; # $? contains the return value of the systemcall
- $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);
-
+ $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);
+
if ($returnvalue)
{
- $installer::logger::Lang->printf("ERROR: Could not execute \"%s\"!\n",
$systemcall);
+ $installer::logger::Lang->printf("ERROR: Could not execute
\"%s\"!\n", $systemcall);
}
else
{
- $installer::logger::Lang->print("Success: Executed \"%s\"
successfully!\n", $systemcall);
+ $installer::logger::Lang->print("Success: Executed \"%s\"
successfully!\n", $systemcall);
}
-
- return $md5sumoutput;
+
+ return $md5sumoutput;
}
#########################################################
-# Calling md5sum
+# Calling md5sum
#########################################################
sub get_md5sum
{
my ($md5sumoutput) = @_;
-
+
my $md5sum;
-
- if ( $md5sumoutput =~ /^\s*(\w+?)\s+/ )
+
+ if ( $md5sumoutput =~ /^\s*(\w+?)\s+/ )
{
$md5sum = $1;
}
@@ -206,13 +206,13 @@ sub get_md5sum
installer::exiter::exit_program("ERROR: Incorrect return value
from /usr/bin/md5sum: $md5sumoutput", "get_md5sum");
}
- $installer::logger::Lang->printf("Setting md5sum: %s\n", $md5sum);
+ $installer::logger::Lang->printf("Setting md5sum: %s\n", $md5sum);
return $md5sum;
}
#########################################################
-# Determining checksum and size of tar file
+# Determining checksum and size of tar file
#########################################################
sub call_sum
@@ -220,7 +220,7 @@ sub call_sum
my ($filename, $getuidlibrary) = @_;
my $systemcall = "/usr/bin/sum $filename |";
-
+
my $sumoutput = "";
open (SUM, "$systemcall");
@@ -229,29 +229,29 @@ sub call_sum
my $returnvalue = $?; # $? contains the return value of the systemcall
- $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);
-
+ $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);
+
if ($returnvalue)
{
- $installer::logger::Lang->printf("ERROR: Could not execute \"%s\"!\n",
$systemcall);
+ $installer::logger::Lang->printf("ERROR: Could not execute
\"%s\"!\n", $systemcall);
}
else
{
- $installer::logger::Lang->printf("Success: Executed \"%s\"
successfully!\n", $systemcall);
+ $installer::logger::Lang->printf("Success: Executed \"%s\"
successfully!\n", $systemcall);
}
-
+
$sumoutput =~ s/\s+$filename\s$//;
- return $sumoutput;
+ return $sumoutput;
}
#########################################################
-# Searching for the getuid.so in the solver
+# Searching for the getuid.so in the solver
#########################################################
sub get_path_for_library
{
my ($includepatharrayref) = @_;
-
+
my $getuidlibraryname = "getuid.so";
my $getuidlibraryref = "";
@@ -266,12 +266,12 @@ sub get_path_for_library
}
if ($$getuidlibraryref eq "") { installer::exiter::exit_program("ERROR:
Could not find $getuidlibraryname!", "get_path_for_library"); }
-
+
return $$getuidlibraryref;
}
#########################################################
-# Include the tar file into the script
+# Include the tar file into the script
#########################################################
sub include_tar_into_script
@@ -281,21 +281,21 @@ sub include_tar_into_script
my $systemcall = "cat $temporary_tarfile >> $scriptfile && rm
$temporary_tarfile";
my $returnvalue = system($systemcall);
- $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);
-
+ $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);
+
if ($returnvalue)
{
- $installer::logger::Lang->printf("ERROR: Could not execute \"%s\"!\n",
$systemcall);
+ $installer::logger::Lang->printf("ERROR: Could not execute
\"%s\"!\n", $systemcall);
}
else
{
- $installer::logger::Lang->printf("Success: Executed \"%s\"
successfully!\n", $systemcall);
+ $installer::logger::Lang->printf("Success: Executed \"%s\"
successfully!\n", $systemcall);
}
return $returnvalue;
}
#########################################################
-# Create a tar file from the binary package
+# Create a tar file from the binary package
#########################################################
sub tar_package
@@ -311,20 +311,20 @@ sub tar_package
}
my $systemcall = "cd $installdir; $ldpreloadstring tar -cf - * >
$tarfilename";
-
+
my $returnvalue = system($systemcall);
- $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);
-
+ $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);
+
if ($returnvalue)
{
- $installer::logger::Lang->printf("ERROR: Could not execute \"%s\"!\n",
$systemcall);
+ $installer::logger::Lang->printf("ERROR: Could not execute
\"%s\"!\n", $systemcall);
}
else
{
- $installer::logger::Lang->printf("Success: Executed \"\"
successfully!\n", $systemcall);
+ $installer::logger::Lang->printf("Success: Executed \"\"
successfully!\n", $systemcall);
}
-
+
my $localcall = "chmod 775 $tarfilename \>\/dev\/null 2\>\&1";
$returnvalue = system($localcall);
@@ -351,24 +351,24 @@ sub create_tar_gz_file_from_package
my $systemcall = "cd $installdir; rm $onefile";
my $returnvalue = system($systemcall);
- $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);
-
+ $installer::logger::Lang->printf("Systemcall: %s\n",
$systemcall);
+
if ($returnvalue)
{
- $installer::logger::Lang->printf("ERROR: Could not execute
\"%s\"!\n", $systemcall);
+ $installer::logger::Lang->printf("ERROR: Could not
execute \"%s\"!\n", $systemcall);
}
else
{
- $installer::logger::Lang->printf("Success: Executed \"%s\"
successfully!\n", $systemcall);
+ $installer::logger::Lang->printf("Success: Executed
\"%s\" successfully!\n", $systemcall);
}
}
$alldirs = installer::systemactions::get_all_directories($installdir);
- my $packagename = ${$alldirs}[0]; # only taking the first Solaris
package
- if ( $packagename eq "" ) { installer::exiter::exit_program("ERROR:
Could not find package in directory $installdir!", "determine_packagename"); }
+ my $packagename = ${$alldirs}[0]; # only taking the first Solaris
package
+ if ( $packagename eq "" ) { installer::exiter::exit_program("ERROR:
Could not find package in directory $installdir!", "determine_packagename"); }
installer::pathanalyzer::make_absolute_filename_to_relative_filename(\$packagename);
-
+
$installer::globals::downloadfileextension = ".tar.gz";
my $targzname = $packagename .
$installer::globals::downloadfileextension;
$installer::globals::downloadfilename = $targzname;
@@ -382,19 +382,19 @@ sub create_tar_gz_file_from_package
}
my $systemcall = "cd $installdir; $ldpreloadstring tar -cf -
$packagename | gzip > $targzname";
- $installer::logger::Info->printf("... %s ...\n", $systemcall);
+ $installer::logger::Info->printf("... %s ...\n", $systemcall);
my $returnvalue = system($systemcall);
- $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);
-
+ $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);
+
if ($returnvalue)
{
- $installer::logger::Lang->printf("ERROR: Could not execute \"%s\"!\n",
$systemcall);
+ $installer::logger::Lang->printf("ERROR: Could not execute
\"%s\"!\n", $systemcall);
}
else
{
- $installer::logger::Lang->printf("Success: Executed \"%s\"
successfully!\n", $systemcall);
+ $installer::logger::Lang->printf("Success: Executed \"%s\"
successfully!\n", $systemcall);
}
}
@@ -405,10 +405,10 @@ sub create_tar_gz_file_from_package
sub get_installation_type
{
my $type = "";
-
+
if ( $installer::globals::languagepack ) { $type = "langpack"; }
else { $type = "install"; }
-
+
return $type;
}
@@ -430,11 +430,11 @@ sub get_downloadname_language
# en-US is default language and can be removed therefore
# for one-language installation sets
-
+
# if ( $languages =~ /^\s*en-US\s*$/ )
# {
# $languages = "";
- # }
+ # }
if ( length ($languages) > $installer::globals::max_lang_length )
{
@@ -450,44 +450,44 @@ sub get_downloadname_language
sub get_downloadname_productname
{
- my ($allvariables) = @_;
-
- my $start;
-
- if ( $allvariables->{'AOODOWNLOADNAMEPREFIX'} )
- {
- $start = $allvariables->{'AOODOWNLOADNAMEPREFIX'};
- }
- else
- {
- $start = "Apache_OpenOffice";
- if ( $allvariables->{'PRODUCTNAME'} eq "OpenOffice" )
- {
- if ( $allvariables->{'POSTVERSIONEXTENSION'} eq "SDK" )
- {
- $start .= "-SDK";
- }
- }
-
- if ( $allvariables->{'PRODUCTNAME'} eq "AOO-Developer-Build" )
- {
- if ( $allvariables->{'POSTVERSIONEXTENSION'} eq "SDK" )
- {
- $start .= "-Dev-SDK";
- }
- else
- {
- $start .= "-Dev";
- }
- }
-
- if ( $allvariables->{'PRODUCTNAME'} eq "URE" )
- {
- $start .= "-URE";
- }
- }
-
- return $start;
+ my ($allvariables) = @_;
+
+ my $start;
+
+ if ( $allvariables->{'AOODOWNLOADNAMEPREFIX'} )
+ {
+ $start = $allvariables->{'AOODOWNLOADNAMEPREFIX'};
+ }
+ else
+ {
+ $start = "Apache_OpenOffice";
+ if ( $allvariables->{'PRODUCTNAME'} eq "OpenOffice" )
+ {
+ if ( $allvariables->{'POSTVERSIONEXTENSION'} eq "SDK" )
+ {
+ $start .= "-SDK";
+ }
+ }
+
+ if ( $allvariables->{'PRODUCTNAME'} eq "AOO-Developer-Build" )
+ {
+ if ( $allvariables->{'POSTVERSIONEXTENSION'} eq "SDK" )
+ {
+ $start .= "-Dev-SDK";
+ }
+ else
+ {
+ $start .= "-Dev";
+ }
+ }
+
+ if ( $allvariables->{'PRODUCTNAME'} eq "URE" )
+ {
+ $start .= "-URE";
+ }
+ }
+
+ return $start;
}
#########################################################
@@ -497,31 +497,31 @@ sub get_downloadname_productname
sub get_download_version
{
my ($allvariables) = @_;
-
+
my $version = "";
-
+
my $devproduct = 0;
if (( $allvariables->{'DEVELOPMENTPRODUCT'} ) && (
$allvariables->{'DEVELOPMENTPRODUCT'} == 1 )) { $devproduct = 1; }
-
+
my $cwsproduct = 0;
# the environment variable CWS_WORK_STAMP is set only in CWS
if ( $ENV{'CWS_WORK_STAMP'} ) { $cwsproduct = 1; }
- if (( $cwsproduct ) || ( $devproduct )) # use "DEV300m75"
+ if (( $cwsproduct ) || ( $devproduct )) # use "DEV300m75"
{
my $source = uc($installer::globals::build); # DEV300
my $localminor = "";
if ( $installer::globals::minor ne "" ) { $localminor =
$installer::globals::minor; }
else { $localminor = $installer::globals::lastminor; }
- $version = $source . $localminor;
+ $version = $source . $localminor;
}
- else # use 3.2.0rc1
+ else # use 3.2.0rc1
{
$version = $allvariables->{'PRODUCTVERSION'};
if (( $allvariables->{'ABOUTBOXPRODUCTVERSION'} ) && (
$allvariables->{'ABOUTBOXPRODUCTVERSION'} ne "" )) { $version =
$allvariables->{'ABOUTBOXPRODUCTVERSION'}; }
- if (( $allvariables->{'SHORT_PRODUCTEXTENSION'} ) && (
$allvariables->{'SHORT_PRODUCTEXTENSION'} ne "" )) { $version = $version .
$allvariables->{'SHORT_PRODUCTEXTENSION'}; }
+ if (( $allvariables->{'SHORT_PRODUCTEXTENSION'} ) && (
$allvariables->{'SHORT_PRODUCTEXTENSION'} ne "" )) { $version = $version .
$allvariables->{'SHORT_PRODUCTEXTENSION'}; }
}
-
+
return $version;
}
@@ -537,13 +537,13 @@ sub set_date_string
my $devproduct = 0;
if (( $allvariables->{'DEVELOPMENTPRODUCT'} ) && (
$allvariables->{'DEVELOPMENTPRODUCT'} == 1 )) { $devproduct = 1; }
-
+
my $cwsproduct = 0;
# the environment variable CWS_WORK_STAMP is set only in CWS
if ( $ENV{'CWS_WORK_STAMP'} ) { $cwsproduct = 1; }
my $releasebuild = 1;
- if (( $allvariables->{'SHORT_PRODUCTEXTENSION'} ) && (
$allvariables->{'SHORT_PRODUCTEXTENSION'} ne "" )) { $releasebuild = 0; }
+ if (( $allvariables->{'SHORT_PRODUCTEXTENSION'} ) && (
$allvariables->{'SHORT_PRODUCTEXTENSION'} ne "" )) { $releasebuild = 0; }
if (( ! $devproduct ) && ( ! $cwsproduct ) && ( ! $releasebuild ))
{
@@ -552,9 +552,9 @@ sub set_date_string
my $day = $timearray[3];
my $month = $timearray[4] + 1;
my $year = $timearray[5] + 1900;
-
- if ( $month < 10 ) { $month = "0" . $month; }
- if ( $day < 10 ) { $day = "0" . $day; }
+
+ if ( $month < 10 ) { $month = "0" . $month; }
+ if ( $day < 10 ) { $day = "0" . $day; }
$datestring = $year . $month . $day;
}
@@ -569,7 +569,7 @@ sub set_date_string
sub get_download_platformname
{
my $platformname = "";
-
+
if ( $installer::globals::islinuxbuild )
{
$platformname = "Linux";
@@ -584,7 +584,7 @@ sub get_download_platformname
}
elsif ( $installer::globals::isfreebsdbuild )
{
- $platformname = "FreeBSD";
+ $platformname = "FreeBSD";
}
elsif ( $installer::globals::ismacbuild )
{
@@ -593,9 +593,9 @@ sub get_download_platformname
else
{
# $platformname = $installer::globals::packageformat;
- $platformname = $installer::globals::compiler;
+ $platformname = $installer::globals::compiler;
}
-
+
return $platformname;
}
@@ -606,7 +606,7 @@ sub get_download_platformname
sub get_download_architecture
{
my $arch = "";
-
+
if(( $installer::globals::compiler =~ /^unxlngi/ )
|| ( $installer::globals::compiler =~ /^unxmac.i/ )
|| ( $installer::globals::issolarisx86build )
@@ -628,8 +628,8 @@ sub get_download_architecture
{
$arch = "PPC";
}
-
- return $arch;
+
+ return $arch;
}
#########################################################
@@ -639,9 +639,9 @@ sub get_download_architecture
sub get_install_type
{
my ($allvariables) = @_;
-
+
my $type = "";
-
+
if ( $installer::globals::languagepack )
{
$type = "langpack";
@@ -650,15 +650,15 @@ sub get_install_type
{
$type = $type . "-rpm";
}
-
+
if ( $installer::globals::islinuxdebbuild )
{
$type = $type . "-deb";
}
-
+
if ( $installer::globals::packageformat eq "archive" )
{
- $type = $type . "-arc";
+ $type = $type . "-arc";
}
}
else
@@ -669,15 +669,15 @@ sub get_install_type
{
$type = $type . "-rpm";
}
-
+
if ( $installer::globals::islinuxdebbuild )
{
$type = $type . "-deb";
}
-
+
if ( $installer::globals::packageformat eq "archive" )
{
- $type = $type . "-arc";
+ $type = $type . "-arc";
}
if (( $allvariables->{'WITHJREPRODUCT'} ) && (
$allvariables->{'WITHJREPRODUCT'} == 1 ))
@@ -686,7 +686,7 @@ sub get_install_type
}
}
-
+
return $type;
}
@@ -699,9 +699,9 @@ sub get_downloadname_addon
my $addon = "";
if ( $installer::globals::islinuxdebbuild ) { $addon = $addon . "_deb";
}
-
+
if ( $installer::globals::product =~ /_wJRE\s*$/ ) { $addon = "_wJRE"; }
-
+
return $addon;
}
@@ -713,13 +713,13 @@ sub get_downloadname_addon
sub get_versionstring
{
my ( $versionfile ) = @_;
-
+
my $versionstring = "";
for ( my $i = 0; $i <= $#{$versionfile}; $i++ )
{
my $oneline = ${$versionfile}[$i];
-
+
if ( $oneline =~ /^\s*\#/ ) { next; } # comment line
if ( $oneline =~ /^\s*\"\s*(.*?)\s*\"\s*$/ )
{
@@ -727,7 +727,7 @@ sub get_versionstring
last;
}
}
-
+
return $versionstring;
}
@@ -742,21 +742,21 @@ sub get_current_version
my $versionstring = "";
my $filename = "version.info";
# $filename = $installer::globals::ooouploaddir .
$installer::globals::separator . $filename;
-
+
if ( -f $filename )
{
- $installer::logger::Lang->printf("File %s exists. Trying to find
current version.\n", $filename);
+ $installer::logger::Lang->printf("File %s exists. Trying to
find current version.\n", $filename);
my $versionfile = installer::files::read_file($filename);
$versionstring = get_versionstring($versionfile);
- $installer::logger::Lang->printf("Setting version string: %s\n",
$versionstring);
+ $installer::logger::Lang->printf("Setting version string:
%s\n", $versionstring);
}
else
{
- $installer::logger::Lang->printf("File %s does not exist. No version
setting in download file name.\n", $filename);
+ $installer::logger::Lang->printf("File %s does not exist. No
version setting in download file name.\n", $filename);
}
$installer::globals::oooversionstring = $versionstring;
-
+
return $versionstring;
}
@@ -771,7 +771,7 @@ sub get_current_version
sub set_download_filename
{
my ($languagestringref, $allvariables) = @_;
-
+
my $start = get_downloadname_productname($allvariables);
my $versionstring = get_download_version($allvariables);
my $date = set_date_string($allvariables);
@@ -779,16 +779,16 @@ sub set_download_filename
my $architecture = get_download_architecture();
my $type = get_install_type($allvariables);
my $language = get_downloadname_language($languagestringref);
-
+
# Setting the extension happens automatically
- my $filename = $start . "_" . $versionstring . "_" . $date . "_" .
$platform . "_" . $architecture . "_" . $type . "_" . $language;
-
+ my $filename = $start . "_" . $versionstring . "_" . $date . "_" .
$platform . "_" . $architecture . "_" . $type . "_" . $language;
+
$filename =~ s/\_\_/\_/g; # necessary, if $versionstring or
$platform or $language are empty
$filename =~ s/\_\s*$//; # necessary, if $language and $addon
are empty
-
+
$installer::globals::ooodownloadfilename = $filename;
-
+
return $filename;
}
@@ -818,20 +818,20 @@ sub create_tar_gz_file_from_directory
my $targzname = $downloaddir . $installer::globals::separator .
$installer::globals::downloadfilename;
my $systemcall = "cd $changedir; $ldpreloadstring tar -cf - $packdir |
gzip > $targzname";
-
+
my $returnvalue = system($systemcall);
- $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);
-
+ $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);
+
if ($returnvalue)
{
- $installer::logger::Lang->printf("ERROR: Could not execute \"%s\"!\n",
$systemcall);
+ $installer::logger::Lang->printf("ERROR: Could not execute
\"%s\"!\n", $systemcall);
}
else
{
- $installer::logger::Lang->printf("Success: Executed \"%s\"
successfully!\n", $systemcall);
+ $installer::logger::Lang->printf("Success: Executed \"%s\"
successfully!\n", $systemcall);
}
-
+
return $targzname;
}
@@ -866,12 +866,12 @@ sub resolve_variables_in_downloadname
elsif ( $installer::globals::compiler =~ /unxmac.i/ ) { $os = "macosi";
}
elsif ( $installer::globals::compiler =~ /unxmac.x/ ) { $os = "macosx";
}
elsif ( $installer::globals::compiler =~ /unxmacxp/ ) { $os = "macosp";
}
- else { $os = ""; }
+ else { $os = ""; }
$downloadname =~ s/\{os\}/$os/;
my $languages = $$languagestringref;
$downloadname =~ s/\{languages\}/$languages/;
-
+
$downloadname =~ s/\-\-\-/\-/g;
$downloadname =~ s/\-\-/\-/g;
$downloadname =~ s/\-\s*$//;
@@ -880,14 +880,14 @@ sub resolve_variables_in_downloadname
}
##################################################################
-# Windows: Replacing one placeholder with the specified value
+# Windows: Replacing one placeholder with the specified value
##################################################################
sub replace_one_variable
{
my ($templatefile, $placeholder, $value) = @_;
- $installer::logger::Lang->printf("Replacing %s by %s in nsi file\n",
$placeholder, $value);
+ $installer::logger::Lang->printf("Replacing %s by %s in nsi file\n",
$placeholder, $value);
for ( my $i = 0; $i <= $#{$templatefile}; $i++ )
{
@@ -903,28 +903,28 @@ sub replace_one_variable
sub convert_to_unicode
{
my ($string) = @_;
-
+
my $unicodestring = "";
-
+
my $stringlength = length($string);
-
+
for ( my $i = 0; $i < $stringlength; $i++ )
{
$unicodestring = $unicodestring . substr($string, $i, 1);
$unicodestring = $unicodestring . chr(0);
- }
+ }
return $unicodestring;
}
##################################################################
-# Windows: Including the product name into nsi template
+# Windows: Including the product name into nsi template
##################################################################
sub put_windows_productname_into_template
{
my ($templatefile, $variableshashref) = @_;
-
+
my $productname = $variableshashref->{'PRODUCTNAME'};
$productname =~ s/\.//g; # OpenOffice.org -> OpenOfficeorg
@@ -932,13 +932,13 @@ sub put_windows_productname_into_template
}
##################################################################
-# Windows: Including the path to the banner.bmp into nsi template
+# Windows: Including the path to the banner.bmp into nsi template
##################################################################
sub put_banner_bmp_into_template
{
my ($templatefile, $includepatharrayref, $allvariables) = @_;
-
+
# my $filename = "downloadbanner.bmp";
if ( ! $allvariables->{'DOWNLOADBANNER'} ) {
installer::exiter::exit_program("ERROR: DOWNLOADBANNER not defined in product
definition!", "put_banner_bmp_into_template"); }
my $filename = $allvariables->{'DOWNLOADBANNER'};
@@ -947,7 +947,7 @@ sub put_banner_bmp_into_template
if ( $installer::globals::include_pathes_read )
{
- $completefilenameref =
installer::scriptitems::get_sourcepath_from_filename_and_includepath(\$filename,
$includepatharrayref, 0);
+ $completefilenameref =
installer::scriptitems::get_sourcepath_from_filename_and_includepath(\$filename,
$includepatharrayref, 0);
}
else
{
@@ -962,7 +962,7 @@ sub put_banner_bmp_into_template
}
##################################################################
-# Windows: Including the path to the welcome.bmp into nsi template
+# Windows: Including the path to the welcome.bmp into nsi template
##################################################################
sub put_welcome_bmp_into_template
@@ -992,7 +992,7 @@ sub put_welcome_bmp_into_template
}
##################################################################
-# Windows: Including the path to the setup.ico into nsi template
+# Windows: Including the path to the setup.ico into nsi template
##################################################################
sub put_setup_ico_into_template
@@ -1022,88 +1022,88 @@ sub put_setup_ico_into_template
}
##################################################################
-# Windows: Including the publisher into nsi template
+# Windows: Including the publisher into nsi template
##################################################################
sub put_publisher_into_template ($$)
{
- my ($templatefile, $variables) = @_;
-
- my $publisher = $variables->{'OOOVENDOR'};
- $publisher = "" unless defined $publisher;
+ my ($templatefile, $variables) = @_;
+
+ my $publisher = $variables->{'OOOVENDOR'};
+ $publisher = "" unless defined $publisher;
- replace_one_variable($templatefile, "PUBLISHERPLACEHOLDER", $publisher);
+ replace_one_variable($templatefile, "PUBLISHERPLACEHOLDER", $publisher);
}
##################################################################
-# Windows: Including the web site into nsi template
+# Windows: Including the web site into nsi template
##################################################################
sub put_website_into_template ($$)
{
- my ($templatefile, $variables) = @_;
+ my ($templatefile, $variables) = @_;
- my $website = $variables->{'STARTCENTER_INFO_URL'};
- $website = "" unless defined $website;
+ my $website = $variables->{'STARTCENTER_INFO_URL'};
+ $website = "" unless defined $website;
- replace_one_variable($templatefile, "WEBSITEPLACEHOLDER", $website);
+ replace_one_variable($templatefile, "WEBSITEPLACEHOLDER", $website);
}
##################################################################
-# Windows: Including the Java file name into nsi template
+# Windows: Including the Java file name into nsi template
##################################################################
sub put_javafilename_into_template
{
my ($templatefile, $variableshashref) = @_;
-
+
my $javaversion = "";
-
+
if ( $variableshashref->{'WINDOWSJAVAFILENAME'} ) { $javaversion =
$variableshashref->{'WINDOWSJAVAFILENAME'}; }
-
+
replace_one_variable($templatefile, "WINDOWSJAVAFILENAMEPLACEHOLDER",
$javaversion);
}
##################################################################
-# Windows: Including the product version into nsi template
+# Windows: Including the product version into nsi template
##################################################################
sub put_windows_productversion_into_template
{
my ($templatefile, $variableshashref) = @_;
-
+
my $productversion = $variableshashref->{'PRODUCTVERSION'};
-
+
replace_one_variable($templatefile, "PRODUCTVERSIONPLACEHOLDER",
$productversion);
}
##################################################################
-# Windows: Including the product version into nsi template
+# Windows: Including the product version into nsi template
##################################################################
sub put_windows_productpath_into_template
{
my ($templatefile, $variableshashref, $languagestringref,
$localnsisdir) = @_;
-
+
my $productpath = $variableshashref->{'PROPERTYTABLEPRODUCTNAME'};
-
+
my $locallangs = $$languagestringref;
$locallangs =~ s/_/ /g;
if (length($locallangs) > $installer::globals::max_lang_length) {
$locallangs = "multi lingual"; }
- if ( ! $installer::globals::languagepack ) { $productpath =
$productpath . " (" . $locallangs . ")"; }
+ if ( ! $installer::globals::languagepack ) { $productpath =
$productpath . " (" . $locallangs . ")"; }
replace_one_variable($templatefile, "PRODUCTPATHPLACEHOLDER",
$productpath);
}
##################################################################
-# Windows: Including download file name into nsi template
+# Windows: Including download file name into nsi template
##################################################################
sub put_outputfilename_into_template
{
my ($templatefile, $downloadname) = @_;
-
+
$installer::globals::downloadfileextension = ".exe";
$downloadname = $downloadname .
$installer::globals::downloadfileextension;
$installer::globals::downloadfilename = $downloadname;
@@ -1112,7 +1112,7 @@ sub put_outputfilename_into_template
}
##################################################################
-# Windows: Generating the file list in nsi file format
+# Windows: Generating the file list in nsi file format
##################################################################
sub get_file_list
@@ -1123,11 +1123,11 @@ sub get_file_list
my $alldirs = installer::systemactions::get_all_directories($basedir);
unshift(@{$alldirs}, $basedir); # $basedir is the first directory in
$alldirs
-
+
for ( my $i = 0; $i <= $#{$alldirs}; $i++ )
{
my $onedir = ${$alldirs}[$i];
-
+
# Syntax:
# SetOutPath "$INSTDIR"
@@ -1135,20 +1135,20 @@ sub get_file_list
$relativedir =~ s/\Q$basedir\E//;
my $oneline = " " . "SetOutPath" . " " . "\"\$INSTDIR" .
$relativedir . "\"" . "\n";
-
+
if ( $^O =~ /cygwin/i ) {
$oneline =~ s/\//\\/g;
}
push(@filelist, $oneline);
-
+
# Collecting all files in the specific directory
-
+
my $files =
installer::systemactions::get_all_files_from_one_directory($onedir);
-
+
for ( my $j = 0; $j <= $#{$files}; $j++ )
{
my $onefile = ${$files}[$j];
-
+
my $fileline = " " . "File" . " " . "\"" . $onefile .
"\"" . "\n";
if ( $^O =~ /cygwin/i ) {
@@ -1162,13 +1162,13 @@ sub get_file_list
}
##################################################################
-# Windows: Including list of all files into nsi template
+# Windows: Including list of all files into nsi template
##################################################################
sub put_filelist_into_template
{
my ($templatefile, $installationdir) = @_;
-
+
my $filelist = get_file_list($installationdir);
my $filestring = "";
@@ -1177,23 +1177,23 @@ sub put_filelist_into_template
{
$filestring = $filestring . ${$filelist}[$i];
}
-
+
$filestring =~ s/\s*$//;
-
+
replace_one_variable($templatefile, "ALLFILESPLACEHOLDER", $filestring);
}
##################################################################
-# Windows: NSIS uses specific language names
+# Windows: NSIS uses specific language names
##################################################################
sub nsis_language_converter
{
my ($language) = @_;
-
+
my $nsislanguage = "";
- # Assign language used by NSIS.
+ # Assign language used by NSIS.
# The files "$nsislanguage.nsh" and "$nsislanguage.nlf"
# are needed in the NSIS environment.
# Directory: <NSIS-Dir>/Contrib/Language files
@@ -1255,8 +1255,8 @@ sub nsis_language_converter
elsif ( $language eq "vi" ) { $nsislanguage = "Vietnamese"; }
elsif ( $language eq "cy" ) { $nsislanguage = "Welsh"; }
else
- {
- $installer::logger::Lang->printf("NSIS language_converter : Could not
find nsis language for %s!\n", $language);
+ {
+ $installer::logger::Lang->printf("NSIS language_converter :
Could not find nsis language for %s!\n", $language);
$nsislanguage = "English";
}
@@ -1264,7 +1264,7 @@ sub nsis_language_converter
}
##################################################################
-# Windows: Including list of all languages into nsi template
+# Windows: Including list of all languages into nsi template
##################################################################
sub put_language_list_into_template
@@ -1273,7 +1273,7 @@ sub put_language_list_into_template
my $alllangstring = "";
my %nsislangs;
-
+
for ( my $i = 0; $i <= $#{$languagesarrayref}; $i++ )
{
my $onelanguage = ${$languagesarrayref}[$i];
@@ -1291,25 +1291,25 @@ sub put_language_list_into_template
}
else
{
- $alllangstring = $alllangstring . $langstring;
+ $alllangstring = $alllangstring . $langstring;
}
}
$alllangstring =~ s/\s*$//;
-
+
replace_one_variable($templatefile, "ALLLANGUAGESPLACEHOLDER",
$alllangstring);
}
##################################################################
-# Windows: Collecting all identifier from mlf file
+# Windows: Collecting all identifier from mlf file
##################################################################
sub get_identifier
{
my ( $mlffile ) = @_;
-
+
my @identifier = ();
-
+
for ( my $i = 0; $i <= $#{$mlffile}; $i++ )
{
my $oneline = ${$mlffile}[$i];
@@ -1336,24 +1336,24 @@ sub get_language_block_from_language_file
my @language_block = ();
for ( my $i = 0; $i <= $#{$languagefile}; $i++ )
- {
+ {
if ( ${$languagefile}[$i] =~ /^\s*\[\s*$searchstring\s*\]\s*$/ )
{
my $counter = $i;
push(@language_block, ${$languagefile}[$counter]);
$counter++;
-
+
while (( $counter <= $#{$languagefile} ) && (!(
${$languagefile}[$counter] =~ /^\s*\[/ )))
{
push(@language_block,
${$languagefile}[$counter]);
$counter++;
}
-
+
last;
}
- }
-
+ }
+
return \@language_block;
}
@@ -1365,7 +1365,7 @@ sub get_language_block_from_language_file
sub get_language_string_from_language_block
{
my ($language_block, $language) = @_;
-
+
my $newstring = "";
for ( my $i = 0; $i <= $#{$language_block}; $i++ )
@@ -1374,15 +1374,15 @@ sub get_language_string_from_language_block
{
$newstring = $1;
last;
- }
- }
-
+ }
+ }
+
if ( $newstring eq "" )
{
- $language = "en-US"; # defaulting to english
+ $language = "en-US"; # defaulting to English
for ( my $i = 0; $i <= $#{$language_block}; $i++ )
- {
+ {
if ( ${$language_block}[$i] =~
/^\s*$language\s*\=\s*\"(.*)\"\s*$/ )
{
$newstring = $1;
@@ -1390,12 +1390,12 @@ sub get_language_string_from_language_block
}
}
}
-
+
return $newstring;
}
##################################################################
-# Windows: Replacing strings in NSIS nsh file
+# Windows: Replacing strings in NSIS nsh file
# nsh file syntax:
# !define MUI_TEXT_DIRECTORY_TITLE "Zielverzeichnis auswählen"
##################################################################
@@ -1405,25 +1405,29 @@ sub replace_identifier_in_nshfile
my ( $nshfile, $identifier, $newstring, $nshfilename, $onelanguage ) =
@_;
for ( my $i = 0; $i <= $#{$nshfile}; $i++ )
+
+ $newstring =~ s/\\r/\$\\r/g; # \r -> $\r in modern nsis versions
+ $newstring =~ s/\\n/\$\\n/g; # \n -> $\n in modern nsis versions
+
{
if ( ${$nshfile}[$i] =~ /\s+\Q$identifier\E\s+\"(.+)\"\s*$/ )
{
my $oldstring = $1;
${$nshfile}[$i] =~ s/\Q$oldstring\E/$newstring/;
- $installer::logger::Lang->printf("NSIS replacement in %s (%s):
\-\> %s\n",
- $nshfilename,
- $onelanguage,
- $oldstring,
- $newstring);
+ $installer::logger::Lang->printf("NSIS replacement in
%s (%s): \-\> %s\n",
+ $nshfilename,
+ $onelanguage,
+ $oldstring,
+ $newstring);
}
}
}
##################################################################
-# Windows: Replacing strings in NSIS nlf file
+# Windows: Replacing strings in NSIS nlf file
# nlf file syntax (2 lines):
# # ^DirSubText
-# Zielverzeichnis
+# Zielverzeichnis
##################################################################
sub replace_identifier_in_nlffile
@@ -1438,17 +1442,17 @@ sub replace_identifier_in_nlffile
my $oldstring = ${$nlffile}[$next];
${$nlffile}[$next] = $newstring . "\n";
$oldstring =~ s/\s*$//;
- $installer::logger::Lang->printf("NSIS replacement in %s (%s): %s
\-\> %s\n",
- $nlffilename,
- $onelanguage,
- $oldstring,
- $newstring);
+ $installer::logger::Lang->printf("NSIS replacement in
%s (%s): %s \-\> %s\n",
+ $nlffilename,
+ $onelanguage,
+ $oldstring,
+ $newstring);
}
- }
+ }
}
##################################################################
-# Windows: Translating the NSIS nsh and nlf file
+# Windows: Translating the NSIS nsh and nlf file
##################################################################
sub translate_nsh_nlf_file
@@ -1457,24 +1461,24 @@ sub translate_nsh_nlf_file
# Analyzing the mlf file, collecting all Identifier
my $allidentifier = get_identifier($mlffile);
-
+
$onelanguage = "en-US" if ( $nsislanguage eq "English" && $onelanguage
ne "en-US");
for ( my $i = 0; $i <= $#{$allidentifier}; $i++ )
{
my $identifier = ${$allidentifier}[$i];
my $language_block =
get_language_block_from_language_file($identifier, $mlffile);
my $newstring =
get_language_string_from_language_block($language_block, $onelanguage);
-
+
# removing mask
$newstring =~ s/\\\'/\'/g;
-
+
replace_identifier_in_nshfile($nshfile, $identifier,
$newstring, $nshfilename, $onelanguage);
- replace_identifier_in_nlffile($nlffile, $identifier,
$newstring, $nlffilename, $onelanguage);
+ replace_identifier_in_nlffile($nlffile, $identifier,
$newstring, $nlffilename, $onelanguage);
}
}
##################################################################
-# Converting utf 16 file to utf 8
+# Converting utf 16 file to utf 8
##################################################################
sub convert_utf16_to_utf8
@@ -1490,7 +1494,7 @@ sub convert_utf16_to_utf8
# open( IN, "<:para:crlf:uni", $filename ) ||
installer::exiter::exit_program("ERROR: Cannot open file $filename for
reading", "convert_utf16_to_utf8");
open( IN, "<:encoding(UTF16-LE)", $filename ) ||
installer::exiter::exit_program("ERROR: Cannot open file $filename for
reading", "convert_utf16_to_utf8");
while ( my $line = <IN> )
- {
+ {
push @localfile, $line;
}
close( IN );
@@ -1498,7 +1502,7 @@ sub convert_utf16_to_utf8
if ( open( OUT, ">:utf8", $filename ) )
{
print OUT @localfile;
- close(OUT);
+ close(OUT);
}
$savfilename = $filename . "_before.utf8";
@@ -1506,12 +1510,12 @@ sub convert_utf16_to_utf8
}
##################################################################
-# Converting utf 8 file to utf 16
+# Converting utf 8 file to utf 16
##################################################################
sub convert_utf8_to_utf16
{
- my ( $filename ) = @_;
+ my ( $filename ) = @_;
my @localfile = ();
@@ -1519,8 +1523,8 @@ sub convert_utf8_to_utf16
installer::systemactions::copy_one_file($filename, $savfilename);
open( IN, "<:utf8", $filename ) ||
installer::exiter::exit_program("ERROR: Cannot open file $filename for
reading", "convert_utf8_to_utf16");
- while (my $line = <IN>)
- {
+ while (my $line = <IN>)
+ {
push @localfile, $line;
}
close( IN );
@@ -1528,7 +1532,7 @@ sub convert_utf8_to_utf16
if ( open( OUT, ">:raw:encoding(UTF16-LE):crlf:utf8", $filename ) )
{
print OUT @localfile;
- close(OUT);
+ close(OUT);
}
$savfilename = $filename . "_after.utf16";
@@ -1536,12 +1540,12 @@ sub convert_utf8_to_utf16
}
##################################################################
-# Converting text string to utf 16
+# Converting text string to utf 16
##################################################################
sub convert_textstring_to_utf16
{
- my ( $textstring, $localnsisdir, $shortfilename ) = @_;
+ my ( $textstring, $localnsisdir, $shortfilename ) = @_;
my $filename = $localnsisdir . $installer::globals::separator .
$shortfilename;
my @filecontent = ();
@@ -1556,13 +1560,13 @@ sub convert_textstring_to_utf16
}
##################################################################
-# Windows: Copying NSIS language files to local nsis directory
+# Windows: Copying NSIS language files to local nsis directory
##################################################################
sub copy_and_translate_nsis_language_files
{
my ($nsispath, $localnsisdir, $languagesarrayref, $allvariables) = @_;
-
+
my $nlffilepath = $nsispath . $installer::globals::separator .
"Contrib" . $installer::globals::separator . "Language\ files" .
$installer::globals::separator;
my $nshfilepath = $nsispath . $installer::globals::separator .
"Contrib" . $installer::globals::separator . "Modern\ UI" .
$installer::globals::separator . "Language files" .
$installer::globals::separator;
@@ -1577,7 +1581,7 @@ sub copy_and_translate_nsis_language_files
my $nlffilename = $localnsisdir .
$installer::globals::separator . $nsislanguage . "_pack.nlf";
if ( $^O =~ /cygwin/i ) { $nlffilename =~ s/\//\\/g; }
installer::systemactions::copy_one_file($sourcepath,
$nlffilename);
-
+
# Copying the nsh file
# In newer nsis versions, the nsh file is located next to the
nlf file
$sourcepath = $nshfilepath . $nsislanguage . "\.nsh";
@@ -1592,32 +1596,32 @@ sub copy_and_translate_nsis_language_files
}
my $nshfilename = $localnsisdir .
$installer::globals::separator . $nsislanguage . "_pack.nsh";
if ( $^O =~ /cygwin/i ) { $nshfilename =~ s/\//\\/g; }
- installer::systemactions::copy_one_file($sourcepath,
$nshfilename);
+ installer::systemactions::copy_one_file($sourcepath,
$nshfilename);
# Changing the macro name in nsh file: MUI_LANGUAGEFILE_BEGIN
-> MUI_LANGUAGEFILE_PACK_BEGIN
- convert_utf16_to_utf8($nshfilename);
- convert_utf16_to_utf8($nlffilename);
- my $nshfile = installer::files::read_file($nshfilename);
+ #convert_utf16_to_utf8($nshfilename);
+ #convert_utf16_to_utf8($nlffilename);
+ my $nshfile = installer::files::read_file($nshfilename);
replace_one_variable($nshfile, "MUI_LANGUAGEFILE_BEGIN",
"MUI_LANGUAGEFILE_PACK_BEGIN");
# find the ulf file for translation
my $mlffile = get_translation_file($allvariables);
-
+
# Translate the files
my $nlffile = installer::files::read_file($nlffilename);
translate_nsh_nlf_file($nshfile, $nlffile, $mlffile,
$onelanguage, $nshfilename, $nlffilename, $nsislanguage);
-
+
installer::files::save_file($nshfilename, $nshfile);
installer::files::save_file($nlffilename, $nlffile);
- convert_utf8_to_utf16($nshfilename);
- convert_utf8_to_utf16($nlffilename);
+ #convert_utf8_to_utf16($nshfilename);
+ #convert_utf8_to_utf16($nlffilename);
}
}
##################################################################
-# Windows: Including the nsis path into the nsi template
+# Windows: Including the nsis path into the nsi template
##################################################################
sub put_nsis_path_into_template
@@ -1628,7 +1632,7 @@ sub put_nsis_path_into_template
}
##################################################################
-# Windows: Including the output path into the nsi template
+# Windows: Including the output path into the nsi template
##################################################################
sub put_output_path_into_template
@@ -1641,7 +1645,7 @@ sub put_output_path_into_template
}
##################################################################
-# Windows: Finding the path to the nsis SDK
+# Windows: Finding the path to the nsis SDK
##################################################################
sub get_path_to_nsis_sdk
@@ -1649,38 +1653,38 @@ sub get_path_to_nsis_sdk
my $nsispath = "";
if ( $ENV{'NSIS_PATH'} )
- {
+ {
$nsispath = $ENV{'NSIS_PATH'};
}
if ( $nsispath eq "" )
{
- $installer::logger::Info->print("... no Environment variable
\"NSIS_PATH\"!\n");
+ $installer::logger::Info->print("... no Environment variable
\"NSIS_PATH\"!\n");
}
- elsif ( ! -d $nsispath )
+ elsif ( ! -d $nsispath )
{
installer::exiter::exit_program("ERROR: NSIS path $nsispath
does not exist!", "get_path_to_nsis_sdk");
}
-
+
return $nsispath;
}
##################################################################
-# Windows: Executing NSIS to create the installation set
+# Windows: Executing NSIS to create the installation set
##################################################################
sub call_nsis
{
my ( $nsispath, $nsifile ) = @_;
-
+
my $makensisexe = $nsispath . $installer::globals::separator .
"makensis.exe";
- $installer::logger::Info->printf("... starting %s ... \n", $makensisexe);
+ $installer::logger::Info->printf("... starting %s ... \n",
$makensisexe);
if( $^O =~ /cygwin/i ) { $nsifile =~ s/\\/\//g; }
my $systemcall = "$makensisexe $nsifile |";
- $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);
+ $installer::logger::Lang->printf("Systemcall: %s\n", $systemcall);
my @nsisoutput = ();
@@ -1692,17 +1696,17 @@ sub call_nsis
if ($returnvalue)
{
- $installer::logger::Lang->printf("ERROR: %s !\n", $systemcall);
+ $installer::logger::Lang->printf("ERROR: %s !\n", $systemcall);
}
else
{
- $installer::logger::Lang->printf("Success: %s\n", $systemcall);
- }
+ $installer::logger::Lang->printf("Success: %s\n", $systemcall);
+ }
foreach my $line (@nsisoutput)
- {
- $installer::logger::Lang->print($line);
- }
+ {
+ $installer::logger::Lang->print($line);
+ }
}
#################################################################################
@@ -1712,11 +1716,11 @@ sub call_nsis
sub replace_one_variable_in_translationfile
{
my ($translationfile, $variable, $searchstring) = @_;
-
+
for ( my $i = 0; $i <= $#{$translationfile}; $i++ )
{
${$translationfile}[$i] =~ s/\%$searchstring/$variable/g;
- }
+ }
}
#################################################################################
@@ -1750,13 +1754,13 @@ sub get_translation_file
my $translationfile = installer::files::read_file($translationfilename);
replace_variables($translationfile, $allvariableshashref);
- $installer::logger::Lang->printf("Reading translation file: %s\n",
$translationfilename);
-
+ $installer::logger::Lang->printf("Reading translation file: %s\n",
$translationfilename);
+
return $translationfile;
}
####################################################
-# Removing english, if it was added before
+# Removing English, if it was added before
####################################################
sub remove_english_for_nsis_installer
@@ -1766,7 +1770,7 @@ sub remove_english_for_nsis_installer
# $$languagestringref =~ s/en-US_//;
# shift(@{$languagesarrayref});
- @{$languagesarrayref} = ("en-US"); # only english for NSIS
installer!
+ @{$languagesarrayref} = ("en-US"); # only English for NSIS
installer!
}
####################################################
@@ -1776,21 +1780,21 @@ sub remove_english_for_nsis_installer
sub create_link_tree
{
my ($sourcedownloadfile, $destfilename, $versionstring) = @_;
-
+
if ( ! $installer::globals::ooouploaddir ) {
installer::exiter::exit_program("ERROR: Directory for AOO upload not defined!",
"create_link_tree"); }
my $versiondir = $installer::globals::ooouploaddir .
$installer::globals::separator . $versionstring;
- $installer::logger::Lang->printf("Directory for the link: %s\n",
$versiondir);
-
+ $installer::logger::Lang->printf("Directory for the link: %s\n",
$versiondir);
+
if ( ! -d $versiondir ) {
installer::systemactions::create_directory_structure($versiondir); }
-
- # inside directory $versiondir all links have to be created
+
+ # inside directory $versiondir all links have to be created
my $linkdestination = $versiondir . $installer::globals::separator .
$destfilename;
# If there is an older version of this file (link), it has to be removed
if ( -f $linkdestination ) { unlink($linkdestination); }
- $installer::logger::Lang->printf("Creating hard link from %s to %s\n",
$sourcedownloadfile, $linkdestination);
- installer::systemactions::hardlink_one_file($sourcedownloadfile,
$linkdestination);
+ $installer::logger::Lang->printf("Creating hard link from %s to %s\n",
$sourcedownloadfile, $linkdestination);
+ installer::systemactions::hardlink_one_file($sourcedownloadfile,
$linkdestination);
}
#######################################################
@@ -1801,7 +1805,7 @@ sub create_link_tree
sub is_supported_platform
{
my $is_supported = 0;
-
+
if (( $installer::globals::islinuxrpmbuild ) ||
( $installer::globals::issolarissparcbuild ) ||
( $installer::globals::issolarisx86build ) ||
@@ -1820,20 +1824,20 @@ sub is_supported_platform
sub create_download_sets
{
my ($installationdir, $includepatharrayref, $allvariableshashref,
$downloadname, $languagestringref, $languagesarrayref) = @_;
-
- $installer::logger::Info->print("\n");
-
$installer::logger::Info->print("******************************************\n");
- $installer::logger::Info->print("... creating download installation set
...\n", 1);
-
$installer::logger::Info->print("******************************************\n");
+
+ $installer::logger::Info->print("\n");
+
$installer::logger::Info->print("******************************************\n");
+ $installer::logger::Info->print("... creating download installation set
...\n", 1);
+
$installer::logger::Info->print("******************************************\n");
installer::logger::include_header_into_logfile("Creating download
installation sets:");
- # special handling for installation sets, to which english was added
automatically
+ # special handling for installation sets, to which English was added
automatically
if ( $installer::globals::added_english ) {
remove_english_for_nsis_installer($languagestringref, $languagesarrayref); }
my $firstdir = $installationdir;
installer::pathanalyzer::get_path_from_fullqualifiedname(\$firstdir);
-
+
my $lastdir = $installationdir;
installer::pathanalyzer::make_absolute_filename_to_relative_filename(\$lastdir);
@@ -1843,9 +1847,9 @@ sub create_download_sets
# removing existing directory "_native_packed_inprogress" and
"_native_packed_witherror" and "_native_packed"
my $downloaddir = $firstdir . $lastdir;
-
+
if ( -d $downloaddir ) {
installer::systemactions::remove_complete_directory($downloaddir); }
-
+
my $olddir = $downloaddir;
$olddir =~ s/_inprogress/_witherror/;
if ( -d $olddir ) {
installer::systemactions::remove_complete_directory($olddir); }
@@ -1855,21 +1859,21 @@ sub create_download_sets
if ( -d $olddir ) {
installer::systemactions::remove_complete_directory($olddir); }
# creating the new directory
-
+
installer::systemactions::create_directory($downloaddir);
$installer::globals::saveinstalldir = $downloaddir;
# evaluating the name of the download file
- if ( $allvariableshashref->{'AOODOWNLOADNAME'} )
- {
- $downloadname = set_download_filename($languagestringref,
$allvariableshashref);
- }
- else
- {
- $downloadname =
resolve_variables_in_downloadname($allvariableshashref, $downloadname,
$languagestringref);
- }
+ if ( $allvariableshashref->{'AOODOWNLOADNAME'} )
+ {
+ $downloadname = set_download_filename($languagestringref,
$allvariableshashref);
+ }
+ else
+ {
+ $downloadname =
resolve_variables_in_downloadname($allvariableshashref, $downloadname,
$languagestringref);
+ }
if ( ! $installer::globals::iswindowsbuild ) # Unix specific part
{
@@ -1901,8 +1905,8 @@ sub create_download_sets
if ($$scriptref eq "") {
installer::exiter::exit_program("ERROR: Could not find script file
$scriptfilename!", "create_download_sets"); }
my $scriptfile =
installer::files::read_file($$scriptref);
- $installer::logger::Lang->printf("Found script file %s: %s \n",
$scriptfilename, $$scriptref);
-
+ $installer::logger::Lang->printf("Found script file %s:
%s \n", $scriptfilename, $$scriptref);
+
# add product name into script template
put_productname_into_script($scriptfile,
$allvariableshashref);
@@ -1911,22 +1915,22 @@ sub create_download_sets
# create tar file
my $temporary_tarfile_name = $downloaddir .
$installer::globals::separator . 'installset.tar';
- my $size = tar_package($installationdir,
$temporary_tarfile_name, $getuidlibrary);
- installer::exiter::exit_program("ERROR: Could not
create tar file $temporary_tarfile_name!", "create_download_sets") unless
$size;
+ my $size = tar_package($installationdir,
$temporary_tarfile_name, $getuidlibrary);
+ installer::exiter::exit_program("ERROR: Could not
create tar file $temporary_tarfile_name!", "create_download_sets") unless $size;
# calling sum to determine checksum and size of the tar
file
my $sumout = call_sum($temporary_tarfile_name);
-
+
# writing checksum and size into scriptfile
put_checksum_and_size_into_script($scriptfile, $sumout);
-
+
# saving the script file
my $newscriptfilename =
determine_scriptfile_name($downloadname);
$newscriptfilename = save_script_file($downloaddir,
$newscriptfilename, $scriptfile);
- $installer::logger::Info->printf("... including installation set
into %s ... \n", $newscriptfilename);
- # Append tar file to script
- include_tar_into_script($newscriptfilename,
$temporary_tarfile_name);
+ $installer::logger::Info->printf("... including
installation set into %s ... \n", $newscriptfilename);
+ # Append tar file to script
+ include_tar_into_script($newscriptfilename,
$temporary_tarfile_name);
}
}
else # Windows specific part
@@ -1940,15 +1944,15 @@ sub create_download_sets
if ( $nsispath eq "" ) {
# If nsis is not found just skip the rest of this
function
# and do not create the NSIS file.
- $installer::logger::Lang->print("\n");
- $installer::logger::Lang->printf("No NSIS SDK found. Skipping the
generation of NSIS file.\n");
- $installer::logger::Info->print("... no NSIS SDK found. Skipping
the generation of NSIS file ... \n");
+ $installer::logger::Lang->print("\n");
+ $installer::logger::Lang->printf("No NSIS SDK found.
Skipping the generation of NSIS file.\n");
+ $installer::logger::Info->print("... no NSIS SDK found.
Skipping the generation of NSIS file ... \n");
return $downloaddir;
}
# copy language files into nsis directory and translate them
copy_and_translate_nsis_language_files($nsispath,
$localnsisdir, $languagesarrayref, $allvariableshashref);
-
+
# find and read the nsi file template
my $templatefilename = "downloadtemplate.nsi";
@@ -1981,15 +1985,15 @@ sub create_download_sets
put_language_list_into_template($templatefile,
$languagesarrayref);
put_nsis_path_into_template($templatefile, $localnsisdir);
put_output_path_into_template($templatefile, $downloaddir);
-
+
my $nsifilename = save_script_file($localnsisdir,
$templatefilename, $templatefile);
- $installer::logger::Info->printf("... created NSIS file %s ... \n",
$nsifilename);
-
+ $installer::logger::Info->printf("... created NSIS file %s ...
\n", $nsifilename);
+
# starting the NSIS SDK to create the download file
- call_nsis($nsispath, $nsifilename);
+ call_nsis($nsispath, $nsifilename);
}
-
+
return $downloaddir;
}
@@ -2001,10 +2005,10 @@ sub create_download_link_tree
{
my ($downloaddir, $languagestringref, $allvariableshashref) = @_;
- $installer::logger::Info->print("\n");
-
$installer::logger::Info->print("******************************************\n");
#
- $installer::logger::Info->print("... creating download hard link ...\n");
-
$installer::logger::Info->print("******************************************\n");
+ $installer::logger::Info->print("\n");
+
$installer::logger::Info->print("******************************************\n");
#
+ $installer::logger::Info->print("... creating download hard link
...\n");
+
$installer::logger::Info->print("******************************************\n");
installer::logger::include_header_into_logfile("Creating download hard
link:");
$installer::logger::Lang->print("\n");
@@ -2014,14 +2018,14 @@ sub create_download_link_tree
{
my $versionstring = "";
# Already defined $installer::globals::oooversionstring and
$installer::globals::ooodownloadfilename ?
-
+
if ( ! $installer::globals::oooversionstring ) { $versionstring
= get_current_version(); }
- else { $versionstring = $installer::globals::oooversionstring;
}
-
- # Is $versionstring empty? If yes, there is nothing to do now.
+ else { $versionstring = $installer::globals::oooversionstring; }
+
+ # Is $versionstring empty? If yes, there is nothing to do now.
+
+ $installer::logger::Lang->printf("Version string is set to:
%s\n", $versionstring);
- $installer::logger::Lang->printf("Version string is set to: %s\n",
$versionstring);
-
if ( $versionstring )
{
# Now the downloadfilename has to be set (if not
already done)
@@ -2033,26 +2037,26 @@ sub create_download_link_tree
{
$destdownloadfilename = $destdownloadfilename .
$installer::globals::downloadfileextension;
- $installer::logger::Lang->printf("Setting destination download
file name: %s\n", $destdownloadfilename);
+ $installer::logger::Lang->printf("Setting
destination download file name: %s\n", $destdownloadfilename);
my $sourcedownloadfile = $downloaddir .
$installer::globals::separator . $installer::globals::downloadfilename;
- $installer::logger::Lang->printf("Setting source download file
name: %s\n", $sourcedownloadfile);
+ $installer::logger::Lang->printf("Setting
source download file name: %s\n", $sourcedownloadfile);
create_link_tree($sourcedownloadfile,
$destdownloadfilename, $versionstring);
# my $md5sumoutput = call_md5sum($downloadfile);
# my $md5sum = get_md5sum($md5sumoutput);
-
+
}
}
else
{
- $installer::logger::Lang->printf("Version string is empty. Nothing
to do!\n");
- }
- }
+ $installer::logger::Lang->printf("Version string is
empty. Nothing to do!\n");
+ }
+ }
else
{
- $installer::logger::Lang->printf("Platform not used for hard linking.
Nothing to do!\n");
+ $installer::logger::Lang->printf("Platform not used for hard
linking. Nothing to do!\n");
}
$installer::logger::Lang->add_timestamp("Performance Info: Creating
hard link, stop");
