This is an automated email from the ASF dual-hosted git repository.
mseidel pushed a commit to branch trunk
in repository https://gitbox.apache.org/repos/asf/openoffice.git
The following commit(s) were added to refs/heads/trunk by this push:
new 7a06057217 Translate German (Anz -> Count), cleanup
7a06057217 is described below
commit 7a060572174e01fdba6408933249961c2f4db977
Author: mseidel <[email protected]>
AuthorDate: Wed Mar 19 12:56:40 2025 +0100
Translate German (Anz -> Count), cleanup
---
main/filter/source/msfilter/msdffimp.cxx | 356 +++++++++++++++----------------
main/svx/source/svdraw/svdorect.cxx | 222 ++++++++++---------
main/svx/source/svdraw/svdtrans.cxx | 24 +--
3 files changed, 296 insertions(+), 306 deletions(-)
diff --git a/main/filter/source/msfilter/msdffimp.cxx
b/main/filter/source/msfilter/msdffimp.cxx
index 1cc07e7762..5d33a4b40c 100644
--- a/main/filter/source/msfilter/msdffimp.cxx
+++ b/main/filter/source/msfilter/msdffimp.cxx
@@ -19,8 +19,6 @@
*
*************************************************************/
-
-
// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_filter.hxx"
/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil -*- */
@@ -163,9 +161,9 @@ void Impl_OlePres::Write( SvStream & rStm )
if( nJobLen )
rStm.Write( pJob, nJobLen );
rStm << (sal_uInt32)nAspect;
- rStm << (sal_Int32)-1; //L-Index immer -1
+ rStm << (sal_Int32)-1; //L-Index immer -1
rStm << (sal_Int32)nAdvFlags;
- rStm << (sal_Int32)0; //Compression
+ rStm << (sal_Int32)0; //Compression
rStm << (sal_Int32)aSize.Width();
rStm << (sal_Int32)aSize.Height();
sal_uLong nPos = rStm.Tell();
@@ -173,7 +171,7 @@ void Impl_OlePres::Write( SvStream & rStm )
if( GetFormat() == FORMAT_GDIMETAFILE && pMtf )
{
- // Immer auf 1/100 mm, bis Mtf-Loesung gefunden
+ // Immer auf 1/100 mm, bis Mtf-Lösung gefunden
// Annahme (keine Skalierung, keine Org-Verschiebung)
DBG_ASSERT( pMtf->GetPrefMapMode().GetScaleX() == Fraction( 1,
1 ),
"X-Skalierung im Mtf" );
@@ -206,7 +204,7 @@ void Impl_OlePres::Write( SvStream & rStm )
}
//---------------------------------------------------------------------------
-// Hilfs Klassen aus MSDFFDEF.HXX
+// Hilfs Klassen aus MSDFFDEF.HXX
//---------------------------------------------------------------------------
// Masse fuer dashed lines
@@ -442,10 +440,10 @@ SvStream& operator>>( SvStream& rIn,
SvxMSDffSolverContainer& rContainer )
void SvxMSDffManager::SolveSolver( const SvxMSDffSolverContainer& rSolver )
{
- sal_Int32 i, nCnt;
- for ( i = 0, nCnt = rSolver.aCList.Count(); i < nCnt; i++ )
- {
- SvxMSDffConnectorRule* pPtr =
(SvxMSDffConnectorRule*)rSolver.aCList.GetObject( i );
+ sal_Int32 i, nCnt;
+ for ( i = 0, nCnt = rSolver.aCList.Count(); i < nCnt; i++ )
+ {
+ SvxMSDffConnectorRule* pPtr =
(SvxMSDffConnectorRule*)rSolver.aCList.GetObject( i );
if ( pPtr->pCObj )
{
for ( int nN = 0; nN < 2; nN++ )
@@ -458,14 +456,14 @@ void SvxMSDffManager::SolveSolver( const
SvxMSDffSolverContainer& rSolver )
bTail = sal_True;
pO = pPtr->pAObj;
nC = pPtr->ncptiA;
- nSpFlags = pPtr->nSpFlagsA;
+ nSpFlags = pPtr->nSpFlagsA;
}
else
{
bTail = sal_False;
pO = pPtr->pBObj;
nC = pPtr->ncptiB;
- nSpFlags = pPtr->nSpFlagsB;
+ nSpFlags = pPtr->nSpFlagsB;
}
if ( pO )
{
@@ -475,9 +473,9 @@ void SvxMSDffManager::SolveSolver( const
SvxMSDffSolverContainer& rSolver )
Reference< XShape > aXConnector(
pPtr->pCObj->getUnoShape(), UNO_QUERY );
SdrGluePointList* pList =
pO->ForceGluePointList();
- sal_Bool bValidGluePoint = sal_False;
+ sal_Bool bValidGluePoint = sal_False;
sal_Int32 nId = nC;
- sal_uInt32 nInventor = pO->GetObjInventor();
+ sal_uInt32 nInventor =
pO->GetObjInventor();
if( nInventor == SdrInventor )
{
@@ -498,12 +496,12 @@ void SvxMSDffManager::SolveSolver( const
SvxMSDffSolverContainer& rSolver )
if ( nC & 1 )
{
if (
nSpFlags & SP_FFLIPH )
-
nC ^= 2; // 1 <-> 3
+
nC ^= 2; // 1 <-> 3
}
else
{
if (
nSpFlags & SP_FFLIPV )
-
nC ^= 1; // 0 <-> 2
+
nC ^= 1; // 0 <-> 2
}
switch( nC )
{
@@ -629,12 +627,12 @@ void SvxMSDffManager::SolveSolver( const
SvxMSDffSolverContainer& rSolver )
if ( nC
& 1 )
{
if ( nSpFlags & SP_FFLIPH )
-
nC ^= 2; // 1 <-> 3
+
nC ^= 2; // 1 <-> 3
}
else
{
if ( nSpFlags & SP_FFLIPV )
-
nC ^= 1; // 0 <-> 2
+
nC ^= 1; // 0 <-> 2
}
switch(
nC )
{
@@ -800,7 +798,7 @@ static basegfx::B2DPolygon GetLineArrow( const sal_Int32
nLineWidth, const MSO_L
{
basegfx::B2DPolygon aRetval;
// 70 100mm = 2pt = 40 twip. In MS, line width less than 2pt has the
same size arrow as 2pt
- //If the unit is twip. Make all use this unit especially the critical
value 70/40.
+ // If the unit is twip. Make all use this unit especially the critical
value 70/40.
sal_Int32 nLineWidthCritical = bScaleArrow ? 40 : 70;
double fLineWidth = nLineWidth < nLineWidthCritical ?
nLineWidthCritical : nLineWidth;;
double fLenghtMul, fWidthMul;
@@ -919,28 +917,28 @@ void DffPropertyReader::ApplyLineAttributes( SfxItemSet&
rSet, const MSO_SPT eSh
// Linienattribute
sal_Int32 nLineWidth = (sal_Int32)GetPropertyValue(
DFF_Prop_lineWidth, 9525 );
- // support LineCap
- const MSO_LineCap
eLineCap((MSO_LineCap)GetPropertyValue(DFF_Prop_lineEndCapStyle,
mso_lineEndCapSquare));
+ // support LineCap
+ const MSO_LineCap
eLineCap((MSO_LineCap)GetPropertyValue(DFF_Prop_lineEndCapStyle,
mso_lineEndCapSquare));
- switch(eLineCap)
- {
- default: /* case mso_lineEndCapFlat */
- {
- // no need to set, it is the default. If this changes, this
needs to be activated
- //
rSet.Put(XLineCapItem(com::sun::star::drawing::LineCap_BUTT));
- break;
- }
- case mso_lineEndCapRound:
- {
- rSet.Put(XLineCapItem(com::sun::star::drawing::LineCap_ROUND));
- break;
- }
- case mso_lineEndCapSquare:
- {
-
rSet.Put(XLineCapItem(com::sun::star::drawing::LineCap_SQUARE));
- break;
- }
- }
+ switch(eLineCap)
+ {
+ default: /* case mso_lineEndCapFlat */
+ {
+ // no need to set, it is the default. If this
changes, this needs to be activated
+ //
rSet.Put(XLineCapItem(com::sun::star::drawing::LineCap_BUTT));
+ break;
+ }
+ case mso_lineEndCapRound:
+ {
+
rSet.Put(XLineCapItem(com::sun::star::drawing::LineCap_ROUND));
+ break;
+ }
+ case mso_lineEndCapSquare:
+ {
+
rSet.Put(XLineCapItem(com::sun::star::drawing::LineCap_SQUARE));
+ break;
+ }
+ }
MSO_LineDashing eLineDashing =
(MSO_LineDashing)GetPropertyValue( DFF_Prop_lineDashing, mso_lineSolid );
if ( eLineDashing == mso_lineSolid )
@@ -1009,12 +1007,12 @@ void DffPropertyReader::ApplyLineAttributes(
SfxItemSet& rSet, const MSO_SPT eSh
}
rSet.Put( XLineColorItem( String(), rManager.MSO_CLR_ToColor(
GetPropertyValue( DFF_Prop_lineColor ), DFF_Prop_lineColor ) ) );
if ( IsProperty( DFF_Prop_lineOpacity ) )
- {
+ {
double nTrans = GetPropertyValue(DFF_Prop_lineOpacity,
0x10000);
- nTrans = (nTrans * 100) / 65536;
+ nTrans = (nTrans * 100) / 65536;
rSet.Put(XLineTransparenceItem(
- sal_uInt16(100 - ::rtl::math::round(nTrans))));
- }
+ sal_uInt16(100 - ::rtl::math::round(nTrans))));
+ }
rManager.ScaleEmu( nLineWidth );
rSet.Put( XLineWidthItem( nLineWidth ) );
@@ -1071,8 +1069,8 @@ void DffPropertyReader::ApplyLineAttributes( SfxItemSet&
rSet, const MSO_SPT eSh
rSet.Put( XLineEndCenterItem( bArrowCenter ) );
}
- // this was used to at least adapt the lineDash to the lineCap
before lineCap was
- // supported, so with supporting lineCap this is no longer needed
+ // this was used to at least adapt the lineDash to the
lineCap before lineCap was
+ // supported, so with supporting lineCap this is no
longer needed
//if ( IsProperty( DFF_Prop_lineEndCapStyle ) )
//{
// MSO_LineCap eLineCap =
(MSO_LineCap)GetPropertyValue( DFF_Prop_lineEndCapStyle );
@@ -1349,9 +1347,9 @@ void DffPropertyReader::ApplyFillAttributes( SvStream&
rIn, SfxItemSet& rSet, co
break;
case mso_fillShadeCenter : // Shade from
bounding rectangle to end point
{
- //If it is imported as a bitmap, it will not
work well with transparecy especially 100
- //But the gradient look well comparing with
imported as gradient. And rotate with shape
- //also works better. So here just keep it.
+ // If it is imported as a bitmap, it will not
work well with transparency especially 100
+ // But the gradient look well comparing with
imported as gradient. And rotate with shape
+ // also works better. So here just keep it.
if ( rObjData.aBoundRect.IsEmpty() )// size of
object needed to be able
eXFill = XFILL_GRADIENT;
// to create a bitmap substitution
else
@@ -1361,7 +1359,7 @@ void DffPropertyReader::ApplyFillAttributes( SvStream&
rIn, SfxItemSet& rSet, co
case mso_fillShade : // Shade from
start to end points
case mso_fillShadeShape : // Shade from
shape outline to end point
case mso_fillShadeScale : // Similar to
mso_fillShade, but the fillAngle
- case mso_fillShadeTitle : // special type
- shade to title --- for PP
+ case mso_fillShadeTitle : // special type
- shade to title --- for PP
eXFill = XFILL_GRADIENT;
break;
// case mso_fillBackground : // Use the
background fill color/pattern
@@ -1398,24 +1396,24 @@ void DffPropertyReader::ApplyFillAttributes( SvStream&
rIn, SfxItemSet& rSet, co
if( IsProperty( DFF_Prop_fillBlip ) )
{
Graphic aGraf;
- // first try to get BLIP from cache
- sal_Bool bOK = rManager.GetBLIP( GetPropertyValue(
DFF_Prop_fillBlip ), aGraf, NULL );
- // then try directly from stream (i.e. Excel chart
hatches/bitmaps)
- if ( !bOK )
- bOK = SeekToContent( DFF_Prop_fillBlip, rIn ) &&
rManager.GetBLIPDirect( rIn, aGraf, NULL );
- if ( bOK )
+ // first try to get BLIP from cache
+ sal_Bool bOK = rManager.GetBLIP(
GetPropertyValue( DFF_Prop_fillBlip ), aGraf, NULL );
+ // then try directly from stream (i.e. Excel
chart hatches/bitmaps)
+ if ( !bOK )
+ bOK = SeekToContent( DFF_Prop_fillBlip,
rIn ) && rManager.GetBLIPDirect( rIn, aGraf, NULL );
+ if ( bOK )
{
if ( eMSO_FillType == mso_fillPattern )
{
Color aCol1( COL_WHITE ),
aCol2( COL_WHITE );
- if ( IsProperty( DFF_Prop_fillColor ) )
+ if ( IsProperty(
DFF_Prop_fillColor ) )
aCol1 =
rManager.MSO_CLR_ToColor( GetPropertyValue( DFF_Prop_fillColor ),
DFF_Prop_fillColor );
- if ( IsProperty( DFF_Prop_fillBackColor ) )
+ if ( IsProperty(
DFF_Prop_fillBackColor ) )
aCol2 =
rManager.MSO_CLR_ToColor( GetPropertyValue( DFF_Prop_fillBackColor ),
DFF_Prop_fillBackColor );
- rSet.Put(XFillBitmapItem(String(), aGraf));
+
rSet.Put(XFillBitmapItem(String(), aGraf));
}
else if ( eMSO_FillType ==
mso_fillTexture )
{
@@ -1440,7 +1438,7 @@ void DffPropertyReader::ApplyFillAttributes( SvStream&
rIn, SfxItemSet& rSet, co
void DffPropertyReader::ApplyCustomShapeTextAttributes( SfxItemSet& rSet )
const
{
-// sal_uInt32 nTextFlags = aTextObj.GetTextFlags();
+// sal_uInt32 nTextFlags = aTextObj.GetTextFlags();
sal_Bool bVerticalText = sal_False;
sal_Int32 nTextLeft = GetPropertyValue( DFF_Prop_dxTextLeft, 25 * 3600
) / 360; // 0.25 cm (emu)
sal_Int32 nTextRight = GetPropertyValue( DFF_Prop_dxTextRight, 25 *
3600 ) / 360; // 0.25 cm (emu)
@@ -1469,8 +1467,8 @@ void DffPropertyReader::ApplyCustomShapeTextAttributes(
SfxItemSet& rSet ) const
if ( bVerticalText )
{
- eTVA = SDRTEXTVERTADJUST_BLOCK;
- eTHA = SDRTEXTHORZADJUST_CENTER;
+ eTVA = SDRTEXTVERTADJUST_BLOCK;
+ eTHA = SDRTEXTHORZADJUST_CENTER;
// Textverankerung lesen
MSO_Anchor eTextAnchor = (MSO_Anchor)GetPropertyValue(
DFF_Prop_anchorText, mso_anchorTop );
@@ -1496,21 +1494,21 @@ void DffPropertyReader::ApplyCustomShapeTextAttributes(
SfxItemSet& rSet ) const
eTHA = SDRTEXTHORZADJUST_LEFT;
break;
}
- // if there is a 100% use of following attributes, the textbox can
been aligned also in vertical direction
- switch ( eTextAnchor )
- {
+ // if there is a 100% use of following attributes, the textbox
can been aligned also in vertical direction
+ switch ( eTextAnchor )
+ {
case mso_anchorTopCentered :
case mso_anchorMiddleCentered :
case mso_anchorBottomCentered :
case mso_anchorTopCenteredBaseline:
case mso_anchorBottomCenteredBaseline:
eTVA = SDRTEXTVERTADJUST_CENTER;
- break;
+ break;
- default :
- eTVA = SDRTEXTVERTADJUST_TOP;
- break;
- }
+ default :
+ eTVA = SDRTEXTVERTADJUST_TOP;
+ break;
+ }
}
else
{
@@ -1541,21 +1539,21 @@ void DffPropertyReader::ApplyCustomShapeTextAttributes(
SfxItemSet& rSet ) const
eTVA = SDRTEXTVERTADJUST_BOTTOM;
break;
}
- // if there is a 100% usage of following attributes, the textbox can
be aligned also in horizontal direction
- switch ( eTextAnchor )
- {
+ // if there is a 100% usage of following attributes, the
textbox can be aligned also in horizontal direction
+ switch ( eTextAnchor )
+ {
case mso_anchorTopCentered :
case mso_anchorMiddleCentered :
case mso_anchorBottomCentered :
case mso_anchorTopCenteredBaseline:
case mso_anchorBottomCenteredBaseline:
- eTHA = SDRTEXTHORZADJUST_CENTER; // the text has to be
displayed using the full width;
- break;
+ eTHA = SDRTEXTHORZADJUST_CENTER; // the text
has to be displayed using the full width;
+ break;
- default :
- eTHA = SDRTEXTHORZADJUST_LEFT;
- break;
- }
+ default :
+ eTHA = SDRTEXTHORZADJUST_LEFT;
+ break;
+ }
}
rSet.Put( SvxFrameDirectionItem( bVerticalText ? FRMDIR_VERT_TOP_RIGHT
: FRMDIR_HORI_LEFT_TOP, EE_PARA_WRITINGDIR ) );
@@ -1652,7 +1650,7 @@ void
DffPropertyReader::ApplyCustomShapeGeometryAttributes( SvStream& rIn, SfxIt
MSO_TextFlow eTextFlow = (MSO_TextFlow)( GetPropertyValue(
DFF_Prop_txflTextFlow ) & 0xFFFF );
/* sal_Int32 nFontDirection = GetPropertyValue(
DFF_Prop_cdirFont, mso_cdir0 ); */
- if ( eTextFlow == mso_txflBtoT ) // Bottom to Top non-@,
unten -> oben
+ if ( eTextFlow == mso_txflBtoT ) // Bottom to Top non-@, unten
-> oben
nTextRotateAngle += 90;
switch( GetPropertyValue( DFF_Prop_cdirFont, mso_cdir0 ) )
// SJ: mso_cdir90 and mso_cdir270 will be simulated by
{
// activating vertical
writing for the text objects
@@ -2911,8 +2909,8 @@ void DffPropertyReader::ImportGradientColor( SfxItemSet&
aSet,MSO_FillType eMSO_
eGrad = XGRAD_AXIAL;//A axial gradient other than linear
nChgColors ^= 1;
}
- //if the type is linear or axial, just save focus to nFocusX and
nFocusY for export
- //Core function does no need them. They serves for rect
gradient(CenterXY).
+ // if the type is linear or axial, just save focus to nFocusX and
nFocusY for export
+ // Core function does no need them. They serves for rect
gradient(CenterXY).
sal_uInt16 nFocusX = (sal_uInt16)nFocus;
sal_uInt16 nFocusY = (sal_uInt16)nFocus;
@@ -3173,15 +3171,15 @@ DffRecordHeader* DffRecordManager::GetRecordHeader(
sal_uInt16 nRecId, DffSeekTo
}
//---------------------------------------------------------------------------
-// private Methoden
+// private Methoden
//---------------------------------------------------------------------------
struct EscherBlipCacheEntry
{
ByteString aUniqueID;
- sal_uInt32 nBlip;
+ sal_uInt32 nBlip;
- EscherBlipCacheEntry( sal_uInt32 nBlipId, const ByteString& rUniqueID ) :
+ EscherBlipCacheEntry( sal_uInt32 nBlipId, const ByteString& rUniqueID )
:
aUniqueID( rUniqueID ),
nBlip( nBlipId ) {}
};
@@ -3228,8 +3226,8 @@ void SvxMSDffManager::Scale( Polygon& rPoly ) const
{
if ( !bNeedMap )
return;
- sal_uInt16 nPointAnz = rPoly.GetSize();
- for ( sal_uInt16 nPointNum = 0; nPointNum < nPointAnz; nPointNum++ )
+ sal_uInt16 nPointCount = rPoly.GetSize();
+ for ( sal_uInt16 nPointNum = 0; nPointNum < nPointCount; nPointNum++ )
Scale( rPoly[ nPointNum ] );
}
@@ -3253,7 +3251,7 @@ sal_uInt32 SvxMSDffManager::ScalePt( sal_uInt32 nVal )
const
Fraction aFact( GetMapFactor( MAP_POINT, eMap ).X() );
long aMul = aFact.GetNumerator();
long aDiv = aFact.GetDenominator() * 65536;
- aFact = Fraction( aMul, aDiv ); // nochmal versuchen zu kuerzen
+ aFact = Fraction( aMul, aDiv ); // nochmal versuchen zu kürzen
return BigMulDiv( nVal, aFact.GetNumerator(), aFact.GetDenominator() );
}
@@ -3273,25 +3271,25 @@ void SvxMSDffManager::SetModel(SdrModel* pModel, long
nApplicationScale)
Fraction aFact( GetMapFactor(MAP_INCH, eMap).X() );
long nMul=aFact.GetNumerator();
long nDiv=aFact.GetDenominator()*nApplicationScale;
- aFact=Fraction(nMul,nDiv); // nochmal versuchen zu kuerzen
+ aFact=Fraction(nMul,nDiv); // nochmal versuchen zu kürzen
// Bei 100TH_MM -> 2540/576=635/144
// Bei Twip -> 1440/576=5/2
nMapMul = aFact.GetNumerator();
nMapDiv = aFact.GetDenominator();
bNeedMap = nMapMul!=nMapDiv;
- // MS-DFF-Properties sind grossteils in EMU (English Metric
Units) angegeben
+ // MS-DFF-Properties sind großteils in EMU (English Metric
Units) angegeben
// 1mm=36000emu, 1twip=635emu
aFact=GetMapFactor(MAP_100TH_MM,eMap).X();
nMul=aFact.GetNumerator();
nDiv=aFact.GetDenominator()*360;
- aFact=Fraction(nMul,nDiv); // nochmal versuchen zu kuerzen
+ aFact=Fraction(nMul,nDiv); // nochmal versuchen zu kürzen
// Bei 100TH_MM -> 1/360
// Bei Twip -> 14,40/(25,4*360)=144/91440=1/635
nEmuMul=aFact.GetNumerator();
nEmuDiv=aFact.GetDenominator();
- // Und noch was fuer typografische Points
+ // Und noch was für typografische Points
aFact=GetMapFactor(MAP_POINT,eMap).X();
nPntMul=aFact.GetNumerator();
nPntDiv=aFact.GetDenominator();
@@ -3392,7 +3390,7 @@ FASTBOOL SvxMSDffManager::SeekToRec( SvStream& rSt,
sal_uInt16 nRecId, sal_uLong
FASTBOOL SvxMSDffManager::SeekToRec2( sal_uInt16 nRecId1, sal_uInt16 nRecId2,
sal_uLong nMaxFilePos, DffRecordHeader* pRecHd, sal_uLong nSkipCount ) const
{
FASTBOOL bRet = sal_False;
- sal_uLong nFPosMerk = rStCtrl.Tell(); // FilePos merken fuer ggf.
spaetere Restauration
+ sal_uLong nFPosMerk = rStCtrl.Tell(); // FilePos merken für ggf.
spätere Restauration
DffRecordHeader aHd;
do
{
@@ -3423,7 +3421,7 @@ FASTBOOL SvxMSDffManager::SeekToRec2( sal_uInt16 nRecId1,
sal_uInt16 nRecId2, sa
FASTBOOL SvxMSDffManager::GetColorFromPalette( sal_uInt16 /* nNum */, Color&
rColor ) const
{
// diese Methode ist in der zum Excel-Import
- // abgeleiteten Klasse zu ueberschreiben...
+ // abgeleiteten Klasse zu überschreiben...
rColor.SetColor( COL_WHITE );
return sal_True;
}
@@ -3437,7 +3435,7 @@ FASTBOOL SvxMSDffManager::GetColorFromPalette( sal_uInt16
/* nNum */, Color& rCo
// fill and line color
Color SvxMSDffManager::MSO_TEXT_CLR_ToColor( sal_uInt32 nColorCode ) const
{
- // Fuer Textfarben: Header ist 0xfeRRGGBB
+ // Für Textfarben: Header ist 0xfeRRGGBB
if ( ( nColorCode & 0xfe000000 ) == 0xfe000000 )
nColorCode &= 0x00ffffff;
else
@@ -3597,14 +3595,14 @@ Color SvxMSDffManager::MSO_CLR_ToColor( sal_uInt32
nColorCode, sal_uInt16 nConte
}
switch( nFunctionBits )
{
- case 0x01 : // darken color by
parameter
+ case 0x01 : // darken color by parameter
{
aColor.SetRed( sal::static_int_cast<
sal_uInt8 >( ( nParameter * aColor.GetRed() ) >> 8 ) );
aColor.SetGreen( sal::static_int_cast<
sal_uInt8 >( ( nParameter * aColor.GetGreen() ) >> 8 ) );
aColor.SetBlue( sal::static_int_cast<
sal_uInt8 >( ( nParameter * aColor.GetBlue() ) >> 8 ) );
}
break;
- case 0x02 : // lighten color by
parameter
+ case 0x02 : // lighten color by parameter
{
sal_uInt16 nInvParameter = ( 0x00ff -
nParameter ) * 0xff;
aColor.SetRed( sal::static_int_cast<
sal_uInt8 >( ( nInvParameter + ( nParameter * aColor.GetRed() ) ) >> 8 ) );
@@ -3612,7 +3610,7 @@ Color SvxMSDffManager::MSO_CLR_ToColor( sal_uInt32
nColorCode, sal_uInt16 nConte
aColor.SetBlue( sal::static_int_cast<
sal_uInt8 >( ( nInvParameter + ( nParameter * aColor.GetBlue() ) ) >> 8 ) );
}
break;
- case 0x03 : // add grey level
RGB(p,p,p)
+ case 0x03 : // add grey level RGB(p,p,p)
{
sal_Int16 nR =
(sal_Int16)aColor.GetRed() + (sal_Int16)nParameter;
sal_Int16 nG =
(sal_Int16)aColor.GetGreen() + (sal_Int16)nParameter;
@@ -3626,7 +3624,7 @@ Color SvxMSDffManager::MSO_CLR_ToColor( sal_uInt32
nColorCode, sal_uInt16 nConte
aColor = Color( (sal_uInt8)nR,
(sal_uInt8)nG, (sal_uInt8)nB );
}
break;
- case 0x04 : // subtract grey level
RGB(p,p,p)
+ case 0x04 : // subtract grey level RGB(p,p,p)
{
sal_Int16 nR =
(sal_Int16)aColor.GetRed() - (sal_Int16)nParameter;
sal_Int16 nG =
(sal_Int16)aColor.GetGreen() - (sal_Int16)nParameter;
@@ -3640,7 +3638,7 @@ Color SvxMSDffManager::MSO_CLR_ToColor( sal_uInt32
nColorCode, sal_uInt16 nConte
aColor = Color( (sal_uInt8)nR,
(sal_uInt8)nG, (sal_uInt8)nB );
}
break;
- case 0x05 : // subtract from grey
level RGB(p,p,p)
+ case 0x05 : // subtract from grey level
RGB(p,p,p)
{
sal_Int16 nR = (sal_Int16)nParameter -
(sal_Int16)aColor.GetRed();
sal_Int16 nG = (sal_Int16)nParameter -
(sal_Int16)aColor.GetGreen();
@@ -3654,7 +3652,7 @@ Color SvxMSDffManager::MSO_CLR_ToColor( sal_uInt32
nColorCode, sal_uInt16 nConte
aColor = Color( (sal_uInt8)nR,
(sal_uInt8)nG, (sal_uInt8)nB );
}
break;
- case 0x06 : // per component: black
if < p, white if >= p
+ case 0x06 : // per component: black if < p,
white if >= p
{
aColor.SetRed( aColor.GetRed() <
nParameter ? 0x00 : 0xff );
aColor.SetGreen( aColor.GetGreen() <
nParameter ? 0x00 : 0xff );
@@ -4026,9 +4024,9 @@ SdrObject* SvxMSDffManager::ImportGraphic( SvStream& rSt,
SfxItemSet& rSet, cons
case 6 : eDrawMode = GRAPHICDRAWMODE_MONO;
break;
case 0 :
{
- //office considers the converted values
of (in OOo) 70 to be the
- //"watermark" values, which can vary
slightly due to rounding from the
- //above values
+ // office considers the converted
values of (in OOo) 70 to be the
+ // "watermark" values, which can vary
slightly due to rounding from the
+ // above values
if (( nContrast == -70 ) && (
nBrightness == 70 ))
{
nContrast = 0;
@@ -4270,13 +4268,13 @@ SdrObject* SvxMSDffManager::ImportGroup( const
DffRecordHeader& rHd, SvStream& r
double a = nGroupRotateAngle * nPi180;
pRet->NbcRotate( aClientRect.Center(),
nGroupRotateAngle, sin( a ), cos( a ) );
}
- if ( nSpFlags & SP_FFLIPV ) // Vertikal
gespiegelt?
+ if ( nSpFlags & SP_FFLIPV ) // Vertikal gespiegelt?
{ // BoundRect in aBoundRect
Point aLeft( aClientRect.Left(), (
aClientRect.Top() + aClientRect.Bottom() ) >> 1 );
Point aRight( aLeft.X() + 1000, aLeft.Y() );
pRet->NbcMirror( aLeft, aRight );
}
- if ( nSpFlags & SP_FFLIPH ) // Horizontal
gespiegelt?
+ if ( nSpFlags & SP_FFLIPH ) // Horizontal gespiegelt?
{ // BoundRect in aBoundRect
Point aTop( ( aClientRect.Left() +
aClientRect.Right() ) >> 1, aClientRect.Top() );
Point aBottom( aTop.X(), aTop.Y() + 1000 );
@@ -4410,7 +4408,7 @@ SdrObject* SvxMSDffManager::ImportShape( const
DffRecordHeader& rHd, SvStream& r
Rectangle aTextRect;
if ( !aObjData.aBoundRect.IsEmpty() )
- { // Rotation auf BoundingBox anwenden, BEVOR ien Objekt
generiert wurde
+ { // Rotation auf BoundingBox anwenden, BEVOR ein Objekt
generiert wurde
if( mnFix16Angle )
{
long nAngle = mnFix16Angle;
@@ -5288,7 +5286,7 @@ SdrObject* SvxMSDffManager::ProcessObj(SvStream& rSt,
pTextObj = new SdrRectObj(OBJ_TEXT, rTextRect);
pTextImpRec = new SvxMSDffImportRec(*pImpRec);
- // Die vertikalen Absatzeinrueckungen sind im BoundRect mit drin,
+ // Die vertikalen Absatzeinrückungen sind im BoundRect mit drin,
// hier rausrechnen
Rectangle aNewRect(rTextRect);
aNewRect.Bottom() -= nTextTop + nTextBottom;
@@ -5346,7 +5344,7 @@ SdrObject* SvxMSDffManager::ProcessObj(SvStream& rSt,
default: break;
}
- // Abstaende an den Raendern der Textbox setzen
+ // Abstände an den Rändern der Textbox setzen
aSet.Put( SdrTextLeftDistItem( nTextLeft ) );
aSet.Put( SdrTextRightDistItem( nTextRight ) );
aSet.Put( SdrTextUpperDistItem( nTextTop ) );
@@ -5577,7 +5575,7 @@ SdrObject* SvxMSDffManager::ProcessObj(SvStream& rSt,
rImportData.aRecords.Insert( pTextImpRec );
}
- // Eintrag in Z-Order-Liste um Zeiger auf dieses Objekt
ergaenzen
+ // Eintrag in Z-Order-Liste um Zeiger auf dieses Objekt
ergänzen
/*Only store objects which are not deep inside the
tree*/
if( ( rObjData.nCalledByGroup == 0 )
||
@@ -5665,7 +5663,7 @@ void SvxMSDffManager::RemoveFromShapeOrder( SdrObject*
pObject ) const
/*struct SvxMSDffBLIPInfo -> in's Header-File
{
- sal_uInt16 nBLIPType; // Art des BLIP: z.B. 6 fuer PNG
+ sal_uInt16 nBLIPType; // Art des BLIP: z.B. 6 für PNG
sal_uLong nFilePos; // Offset des BLIP im Daten-Stream
sal_uLong nBLIPSize; // Anzahl Bytes, die der BLIP im Stream
einnimmt
SvxMSDffBLIPInfo(sal_uInt16 nBType, sal_uLong nFPos, sal_uLong nBSize):
@@ -5682,11 +5680,11 @@ SV_IMPL_OP_PTRARR_SORT( SvxMSDffShapeInfos,
SvxMSDffShapeInfo_Ptr );
SV_IMPL_OP_PTRARR_SORT( SvxMSDffShapeTxBxSort, SvxMSDffShapeOrder_Ptr
);
-// Liste aller SvxMSDffImportRec fuer eine Gruppe
+// Liste aller SvxMSDffImportRec für eine Gruppe
SV_IMPL_OP_PTRARR_SORT(MSDffImportRecords, MSDffImportRec_Ptr)
//---------------------------------------------------------------------------
-// exportierte Klasse: oeffentliche Methoden
+// exportierte Klasse: öffentliche Methoden
//---------------------------------------------------------------------------
SvxMSDffManager::SvxMSDffManager(SvStream& rStCtrl_,
@@ -5706,8 +5704,8 @@ SvxMSDffManager::SvxMSDffManager(SvStream& rStCtrl_,
pShapeOrders( new SvxMSDffShapeOrders ),
nDefaultFontHeight( nDefaultFontHeight_),
nOffsDgg( nOffsDgg_ ),
- nBLIPCount( USHRT_MAX ), // mit Error
initialisieren, da wir erst pruefen,
- nShapeCount( USHRT_MAX ), // ob Kontroll-Stream korrekte
Daten enthaellt
+ nBLIPCount( USHRT_MAX ), // mit Error
initialisieren, da wir erst prüfen,
+ nShapeCount( USHRT_MAX ), // ob Kontroll-Stream korrekte
Daten enthält
maBaseURL( rBaseURL ),
mpFidcls( NULL ),
rStCtrl( rStCtrl_ ),
@@ -5742,7 +5740,7 @@ SvxMSDffManager::SvxMSDffManager(SvStream& rStCtrl_,
// Steuer Stream auslesen, im Erfolgsfall nBLIPCount setzen
GetCtrlData( nOffsDgg );
- // Text-Box-Story-Ketten-Infos ueberpruefen
+ // Text-Box-Story-Ketten-Infos überprüfen
CheckTxBxStoryChain();
// alte FilePos des/der Stream(s) restaurieren
@@ -5759,8 +5757,8 @@ SvxMSDffManager::SvxMSDffManager( SvStream& rStCtrl_,
const String& rBaseURL, MS
pShapeOrders( new SvxMSDffShapeOrders ),
nDefaultFontHeight( 24 ),
nOffsDgg( 0 ),
- nBLIPCount( USHRT_MAX ), // mit Error
initialisieren, da wir erst pruefen,
- nShapeCount( USHRT_MAX ), // ob Kontroll-Stream korrekte
Daten enthaellt
+ nBLIPCount( USHRT_MAX ), // mit Error
initialisieren, da wir erst prüfen,
+ nShapeCount( USHRT_MAX ), // ob Kontroll-Stream korrekte
Daten enthält
maBaseURL( rBaseURL ),
mpFidcls( NULL ),
rStCtrl( rStCtrl_ ),
@@ -5816,7 +5814,7 @@ void SvxMSDffManager::InitSvxMSDffManager( long
nOffsDgg_, SvStream* pStData_, s
// Steuer Stream auslesen, im Erfolgsfall nBLIPCount setzen
GetCtrlData( nOffsDgg );
- // Text-Box-Story-Ketten-Infos ueberpruefen
+ // Text-Box-Story-Ketten-Infos überprüfen
CheckTxBxStoryChain();
// alte FilePos des/der Stream(s) restaurieren
@@ -5944,7 +5942,7 @@ void SvxMSDffManager::CheckTxBxStoryChain()
// voriger war letzter seiner Gruppe
if( nObj )
pOld->GetObject( nObj-1 )->bLastBoxInChain = sal_True;
- // urspruengliches Array freigeben, ohne Objekte zu zerstoeren
+ // ursprüngliches Array freigeben, ohne Objekte zu zerstören
pOld->Remove((sal_uInt16)0, nCnt);
delete pOld;
}
@@ -5954,7 +5952,7 @@ void SvxMSDffManager::CheckTxBxStoryChain()
Einlesen der Shape-Infos im Ctor:
---------------------------------
- merken der Shape-Ids und zugehoerigen Blip-Nummern und TextBox-Infos
+ merken der Shape-Ids und zugehörigen Blip-Nummern und TextBox-Infos
========= ============
=============
und merken des File-Offsets fuer jedes Blip
============
@@ -6017,7 +6015,7 @@ void SvxMSDffManager::GetCtrlData( long nOffsDgg_ )
}
-// ab hier: Drawing Group Container d.h. Dokument - weit gueltige Daten
+// ab hier: Drawing Group Container d.h. Dokument - weit gültige Daten
// ======================= ========
//
void SvxMSDffManager::GetDrawingGroupContainerData( SvStream& rSt, sal_uLong
nLenDgg )
@@ -6048,7 +6046,7 @@ void SvxMSDffManager::GetDrawingGroupContainerData(
SvStream& rSt, sal_uLong nLe
// relevanten Daten aller enthaltenen FBSEs in unserem Pointer Array
ablegen.
// Dabei zaehlen wir die gefundenen FBSEs im Member nBLIPCount mit.
- const sal_uLong nSkipBLIPLen = 20; // bis zu nBLIPLen zu
ueberspringende Bytes
+ const sal_uLong nSkipBLIPLen = 20; // bis zu nBLIPLen zu
überspringende Bytes
const sal_uLong nSkipBLIPPos = 4; // dahinter bis zu nBLIPPos zu
skippen
sal_uInt32 nBLIPLen = 0, nBLIPPos = 0;
@@ -6130,7 +6128,7 @@ void SvxMSDffManager::GetDrawingGroupContainerData(
SvStream& rSt, sal_uLong nLe
}
-// ab hier: Drawing Container d.h. Seiten (Blatt, Dia) - weit gueltige Daten
+// ab hier: Drawing Container d.h. Seiten (Blatt, Dia) - weit gültige Daten
// ================= ======
//
void SvxMSDffManager::GetDrawingContainerData( SvStream& rSt, sal_uLong nLenDg,
@@ -6141,8 +6139,7 @@ void SvxMSDffManager::GetDrawingContainerData( SvStream&
rSt, sal_uLong nLenDg,
sal_uLong nReadDg = 0;
// Wir stehen in einem Drawing Container (je einer pro Seite)
- // und muessen nun
- // alle enthaltenen Shape Group Container abklappern
+ // und müssen nun alle enthaltenen Shape Group Container abklappern
do
{
if(!this->ReadCommonRecordHeader( rSt, nVer, nInst, nFbt,
nLength)) return;
@@ -6153,7 +6150,7 @@ void SvxMSDffManager::GetDrawingContainerData( SvStream&
rSt, sal_uLong nLenDg,
if(!this->GetShapeGroupContainerData( rSt, nLength, sal_True,
nDrawingContainerId )) return;
}
else
- // blanker Shape Container ? (ausserhalb vom Shape Group
Container)
+ // blanker Shape Container ? (außerhalb vom Shape Group
Container)
if( DFF_msofbtSpContainer == nFbt )
{
if(!this->GetShapeContainerData( rSt, nLength, ULONG_MAX,
nDrawingContainerId )) return;
@@ -6173,7 +6170,7 @@ sal_Bool SvxMSDffManager::GetShapeGroupContainerData(
SvStream& rSt,
sal_uInt8 nVer;sal_uInt16 nInst;sal_uInt16 nFbt;sal_uInt32 nLength;
long nStartShapeGroupCont = rSt.Tell();
// Wir stehen in einem Shape Group Container (ggfs. mehrere pro Seite)
- // und muessen nun
+ // und müssen nun
// alle enthaltenen Shape Container abklappern
sal_Bool bFirst = !bPatriarch;
sal_uLong nReadSpGrCont = 0;
@@ -6215,8 +6212,8 @@ sal_Bool SvxMSDffManager::GetShapeContainerData(
SvStream& rSt,
sal_uInt8 nVer;sal_uInt16 nInst;sal_uInt16 nFbt;sal_uInt32 nLength;
long nStartShapeCont = rSt.Tell();
// Wir stehen in einem Shape Container (ggfs. mehrere pro Sh. Group)
- // und muessen nun
- // die Shape Id und File-Pos (fuer spaetere, erneute Zugriffe)
+ // und müssen nun
+ // die Shape Id und File-Pos (für spätere, erneute Zugriffe)
// und den ersten BStore Verweis (falls vorhanden) entnehmen
sal_uLong nLenShapePropTbl = 0;
sal_uLong nReadSpCont = 0;
@@ -6227,7 +6224,7 @@ sal_Bool SvxMSDffManager::GetShapeContainerData(
SvStream& rSt,
nPosGroup :
nStartShapeCont - DFF_COMMON_RECORD_HEADER_SIZE;
SvxMSDffShapeInfo aInfo( nStartOffs );
- // duerfte das Shape durch einen Rahmen ersetzt werden ?
+ // dürfte das Shape durch einen Rahmen ersetzt werden?
// (vorausgesetzt, es zeigt sich, dass es eine TextBox ist,
// und der Text nicht gedreht ist)
sal_Bool bCanBeReplaced = (ULONG_MAX > nPosGroup) ? sal_False :
sal_True;
@@ -6272,11 +6269,11 @@ sal_Bool SvxMSDffManager::GetShapeContainerData(
SvStream& rSt,
switch( nPropId )
{
case DFF_Prop_txflTextFlow :
- //Writer can now handle vertical textflows in its
- //native frames, to only need to do this for the
- //other two formats
+ // Writer can now handle vertical textflows in its
+ // native frames, to only need to do this for the
+ // other two formats
- //Writer will handle all textflow except BtoT
+ // Writer will handle all textflow except BtoT
if (GetSvxMSDffSettings() &
(SVXMSDFF_SETTINGS_IMPORT_PPT |
SVXMSDFF_SETTINGS_IMPORT_EXCEL))
@@ -6293,9 +6290,9 @@ sal_Bool SvxMSDffManager::GetShapeContainerData(
SvStream& rSt,
}
break;
case DFF_Prop_cdirFont :
- //Writer can now handle right to left and left
- //to right in its native frames, so only do
- //this for the other two formats.
+ // Writer can now handle right to left and left
+ // to right in its native frames, so only do
+ // this for the other two formats.
if (GetSvxMSDffSettings() &
(SVXMSDFF_SETTINGS_IMPORT_PPT |
SVXMSDFF_SETTINGS_IMPORT_EXCEL))
@@ -6325,7 +6322,7 @@ sal_Bool SvxMSDffManager::GetShapeContainerData(
SvStream& rSt,
default:
{
- // Bit gesetzt und gueltig?
+ // Bit gesetzt und gültig?
if( 0x4000 == ( nPropId &
0xC000 ) )
{
// Blip Property
gefunden: BStore Idx vermerken!
@@ -6334,8 +6331,8 @@ sal_Bool SvxMSDffManager::GetShapeContainerData(
SvStream& rSt,
else if( 0x8000 & nPropId )
{
// komplexe Prop
gefunden:
- // Laenge ist immer 6,
nur die Laenge der nach der
- // eigentlichen
Prop-Table anhaengenden Extra-Daten
+ // Länge ist immer 6,
nur die Länge der nach der
+ // eigentlichen
Prop-Table anhängenden Extra-Daten
// ist unterschiedlich
nPropVal = 6;
}
@@ -6345,10 +6342,10 @@ sal_Bool SvxMSDffManager::GetShapeContainerData(
SvStream& rSt,
/*
//JP 21.04.99: Bug 64510
-// alte Version, die unter OS/2 zu Compilerfehlern fuehrt und damit arge
+// alte Version, die unter OS/2 zu Compilerfehlern führt und damit arge
// Performance einbussen hat.
- if( 0x4000 == ( nPropId & 0xC000 ) )// Bit
gesetzt und gueltig?
+ if( 0x4000 == ( nPropId & 0xC000 ) )// Bit
gesetzt und gültig?
{
// Blip Property gefunden: BStore Idx
vermerken!
aInfo.nBStoreIdx = nPropVal; //
Index im BStore Container
@@ -6374,14 +6371,12 @@ sal_Bool SvxMSDffManager::GetShapeContainerData(
SvStream& rSt,
eWrapMode = (MSO_WrapMode)nPropVal;
}
////////////////////////////////////////////////////////////////
-
////////////////////////////////////////////////////////////////
// keine weitere Property-Auswertung: folge
beim Shape-Import //
////////////////////////////////////////////////////////////////
-
////////////////////////////////////////////////////////////////
else
if( 0x8000 & nPropId )
{
- // komplexe Prop gefunden: Laenge lesen
und ueberspringen
+ // komplexe Prop gefunden: Länge lesen
und überspringen
if(!SkipBytes( rSt, nPropVal )) return
sal_False;
nPropRead += nPropVal;
}
@@ -6413,7 +6408,7 @@ sal_Bool SvxMSDffManager::GetShapeContainerData(
SvStream& rSt,
while( nReadSpCont < nLenShapeCont );
//
- // Jetzt ggfs. die Infos fuer spaetere Zugriffe auf das Shape speichern
+ // Jetzt ggfs. die Infos für spätere Zugriffe auf das Shape speichern
//
if( aInfo.nShapeId )
{
@@ -6443,8 +6438,7 @@ sal_Bool SvxMSDffManager::GetShapeContainerData(
SvStream& rSt,
/*****************************************************************************
-
- Zugriff auf ein Shape zur Laufzeit (ueber die Shape-Id)
+ Zugriff auf ein Shape zur Laufzeit (über die Shape-Id)
----------------------------------
******************************************************************************/
sal_Bool SvxMSDffManager::GetShape(sal_uLong nId, SdrObject*& rpShape,
@@ -6541,7 +6535,7 @@ sal_Bool SvxMSDffManager::GetBLIP( sal_uLong nIdx_,
Graphic& rData, Rectangle* p
if( pStData2 && !bOk )
{
// Fehler, aber zweite Chance: es gibt noch einen
zweiten
- // Datenstream, in dem die Grafik liegen
koennte!
+ // Datenstream, in dem die Grafik liegen
könnte!
if( pStData2->GetError() )
pStData2->ResetError();
sal_uLong nOldPosData2 = pStData2->Tell();
@@ -6744,7 +6738,7 @@ sal_Bool SvxMSDffManager::GetBLIPDirect( SvStream&
rBLIPStream, Graphic& rData,
}
rBLIPStream.Seek( nOldPos ); // alte FilePos des Streams restaurieren
- return ( GRFILTER_OK == nRes ); // Ergebniss melden
+ return ( GRFILTER_OK == nRes ); // Ergebnis melden
}
/* static */
@@ -6807,7 +6801,7 @@ sal_Bool SvxMSDffManager::ProcessClientData(SvStream&
rStData, sal_uLong nDatLen
void SvxMSDffManager::ProcessClientAnchor2( SvStream& /* rSt */,
DffRecordHeader& /* rHd */ , void* /* pData */, DffObjData& /* rObj */ )
{
- return; // wird von SJ im Draw ueberladen
+ return; // wird von SJ im Draw überladen
}
sal_uLong SvxMSDffManager::Calc_nBLIPPos( sal_uLong nOrgVal, sal_uLong /*
nStreamPos */ ) const
@@ -6857,8 +6851,8 @@ sal_Bool SvxMSDffManager::MakeContentStream( SotStorage *
pStor, const GDIMetaFi
sal_uLong nAdviseModes = 2;
Impl_OlePres aEle( FORMAT_GDIMETAFILE );
- // Die Groesse in 1/100 mm umrechnen
- // Falls eine nicht anwendbare MapUnit (Device abhaengig) verwendet
wird,
+ // Die Größe in 1/100 mm umrechnen
+ // Falls eine nicht anwendbare MapUnit (Device abhängig) verwendet wird,
// versucht SV einen BestMatchden richtigen Wert zu raten.
Size aSize = rMtf.GetPrefSize();
MapMode aMMSrc = rMtf.GetPrefMapMode();
@@ -7344,21 +7338,21 @@ com::sun::star::uno::Reference <
com::sun::star::embed::XEmbeddedObject > SvxMS
SdrOle2Obj* SvxMSDffManager::CreateSdrOLEFromStorage(
const String& rStorageName,
SotStorageRef& rSrcStorage,
- const uno::Reference < embed::XStorage >& xDestStorage,
+ const uno::Reference < embed::XStorage >&
xDestStorage,
const Graphic& rGrf,
const Rectangle& rBoundRect,
const Rectangle& rVisArea,
SvStream* pDataStrm,
- ErrCode& rError,
+ ErrCode& rError,
sal_uInt32 nConvertFlags,
sal_Int64 nReccomendedAspect )
{
sal_Int64 nAspect = nReccomendedAspect;
SdrOle2Obj* pRet = 0;
- if( rSrcStorage.Is() && xDestStorage.is() && rStorageName.Len() )
+ if( rSrcStorage.Is() && xDestStorage.is() && rStorageName.Len() )
{
- comphelper::EmbeddedObjectContainer aCnt( xDestStorage );
- // Ist der 01Ole-Stream ueberhaupt vorhanden ?
+ comphelper::EmbeddedObjectContainer aCnt( xDestStorage );
+ // Ist der 01Ole-Stream überhaupt vorhanden ?
// ( ist er z.B. bei FontWork nicht )
// Wenn nicht -> Einbindung als Grafik
sal_Bool bValidStorage = sal_False;
@@ -7368,7 +7362,7 @@ SdrOle2Obj* SvxMSDffManager::CreateSdrOLEFromStorage(
aDstStgName += String::CreateFromInt32( ++nMSOleObjCntr );
{
- SvStorageRef xObjStg = rSrcStorage->OpenSotStorage( rStorageName,
+ SvStorageRef xObjStg = rSrcStorage->OpenSotStorage(
rStorageName,
STREAM_READWRITE| STREAM_SHARE_DENYALL );
if( xObjStg.Is() )
{
@@ -7431,8 +7425,8 @@ SdrOle2Obj* SvxMSDffManager::CreateSdrOLEFromStorage(
if( bValidStorage )
{
- // object is not an own object
- SotStorageRef xObjStor = SotStorage::OpenOLEStorage( xDestStorage,
aDstStgName, STREAM_READWRITE );
+ // object is not an own object
+ SotStorageRef xObjStor = SotStorage::OpenOLEStorage(
xDestStorage, aDstStgName, STREAM_READWRITE );
if ( xObjStor.Is() )
{
@@ -7444,7 +7438,7 @@ SdrOle2Obj* SvxMSDffManager::CreateSdrOLEFromStorage(
if( xObjStor->GetError() )
{
- rError = xObjStor->GetError();
+ rError = xObjStor->GetError();
bValidStorage = sal_False;
}
else if( !xObjStor.Is() )
@@ -7464,13 +7458,13 @@ SdrOle2Obj* SvxMSDffManager::CreateSdrOLEFromStorage(
{
// or is it an OLE-1 Stream in the DataStream?
SvStorageRef xObjStor = SotStorage::OpenOLEStorage(
xDestStorage, aDstStgName );
- //TODO/MBA: remove metafile conversion from ConvertToOle2
- //when is this code used?!
+ // TODO/MBA: remove metafile conversion from ConvertToOle2
+ // when is this code used?!
GDIMetaFile aMtf;
bValidStorage = ConvertToOle2( *pDataStrm, nLen, &aMtf,
xObjStor );
xObjStor->Commit();
}
- }
+ }
if( bValidStorage )
{
@@ -7508,13 +7502,13 @@ SdrOle2Obj* SvxMSDffManager::CreateSdrOLEFromStorage(
}
}
- svt::EmbeddedObjectRef aObj( xObj, nAspect );
+ svt::EmbeddedObjectRef aObj( xObj, nAspect );
- // TODO/LATER: need MediaType
- aObj.SetGraphic( rGrf, ::rtl::OUString() );
+ // TODO/LATER: need MediaType
+ aObj.SetGraphic( rGrf, ::rtl::OUString() );
- pRet = new SdrOle2Obj( aObj, aDstStgName, rBoundRect, false);
- }
+ pRet = new SdrOle2Obj( aObj, aDstStgName,
rBoundRect, false);
+ }
}
}
@@ -7538,7 +7532,7 @@ SdrObject* SvxMSDffManager::GetAutoForm( MSO_SPT eTyp )
const
sal_Bool SvxMSDffManager::SetPropValue( const uno::Any& rAny, const
uno::Reference< ::com::sun::star::beans::XPropertySet > & rXPropSet,
const String& rPropName, sal_Bool
bTestPropertyAvailability )
{
- sal_Bool bRetValue = sal_True;
+ sal_Bool bRetValue = sal_True;
if ( bTestPropertyAvailability )
{
bRetValue = sal_False;
@@ -7566,7 +7560,7 @@ sal_Bool SvxMSDffManager::SetPropValue( const uno::Any&
rAny, const uno::Referen
bRetValue = sal_False;
}
}
- return bRetValue;
+ return bRetValue;
}
SvxMSDffImportRec::SvxMSDffImportRec()
@@ -7636,9 +7630,9 @@ SvxMSDffImportRec::SvxMSDffImportRec(const
SvxMSDffImportRec& rCopy)
nShapeId( rCopy.nShapeId ),
eShapeType( rCopy.eShapeType )
{
- eLineStyle = rCopy.eLineStyle; // GPF-Bug #66227#
- bDrawHell = rCopy.bDrawHell;
- bHidden = rCopy.bHidden;
+ eLineStyle = rCopy.eLineStyle; // GPF-Bug #66227#
+ bDrawHell = rCopy.bDrawHell;
+ bHidden = rCopy.bHidden;
// bInGroup = rCopy.bInGroup;
bReplaceByFly = rCopy.bReplaceByFly;
bAutoWidth = rCopy.bAutoWidth;
@@ -7668,10 +7662,10 @@ SvxMSDffImportRec::SvxMSDffImportRec(const
SvxMSDffImportRec& rCopy)
else
pClientDataBuffer = 0;
- if (rCopy.pWrapPolygon)
- pWrapPolygon = new Polygon(*rCopy.pWrapPolygon);
- else
- pWrapPolygon = 0;
+ if (rCopy.pWrapPolygon)
+ pWrapPolygon = new Polygon(*rCopy.pWrapPolygon);
+ else
+ pWrapPolygon = 0;
}
SvxMSDffImportRec::~SvxMSDffImportRec()
@@ -7684,8 +7678,6 @@ SvxMSDffImportRec::~SvxMSDffImportRec()
delete pWrapPolygon;
}
-/* vi:set tabstop=4 shiftwidth=4 expandtab: */
-
void SvxMSDffManager::insertShapeId( sal_Int32 nShapeId, SdrObject* pShape )
{
maShapeIdContainer[nShapeId] = pShape;
diff --git a/main/svx/source/svdraw/svdorect.cxx
b/main/svx/source/svdraw/svdorect.cxx
index 4fd7f81be3..3f8e3aac1c 100644
--- a/main/svx/source/svdraw/svdorect.cxx
+++ b/main/svx/source/svdraw/svdorect.cxx
@@ -1,5 +1,5 @@
/**************************************************************
- *
+ *
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
@@ -7,20 +7,18 @@
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
- *
+ *
* http://www.apache.org/licenses/LICENSE-2.0
- *
+ *
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
- *
+ *
*************************************************************/
-
-
// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_svx.hxx"
@@ -36,13 +34,13 @@
#include <svx/svddrag.hxx>
#include <svx/svdmodel.hxx>
#include <svx/svdpage.hxx>
-#include <svx/svdocapt.hxx> // fuer Import von SdrFileVersion 2
-#include <svx/svdpagv.hxx> // fuer
+#include <svx/svdocapt.hxx> // für Import von SdrFileVersion 2
+#include <svx/svdpagv.hxx> // für
#include <svx/svdview.hxx> // das
#include <svx/svdundo.hxx> // Macro-Beispiel
#include <svx/svdopath.hxx>
-#include "svx/svdglob.hxx" // Stringcache
-#include "svx/svdstr.hrc" // Objektname
+#include "svx/svdglob.hxx" // Stringcache
+#include "svx/svdstr.hrc" // Objektname
#include <svx/xflclit.hxx>
#include <svx/xlnclit.hxx>
#include <svx/xlnwtit.hxx>
@@ -91,7 +89,7 @@ SdrRectObj::SdrRectObj(SdrObjKind eNewTextKind)
{
DBG_ASSERT(eTextKind==OBJ_TEXT || eTextKind==OBJ_TEXTEXT ||
eTextKind==OBJ_OUTLINETEXT ||
eTextKind==OBJ_TITLETEXT,
- "SdrRectObj::SdrRectObj(SdrObjKind) ist nur fuer
Textrahmen gedacht");
+ "SdrRectObj::SdrRectObj(SdrObjKind) ist nur für
Textrahmen gedacht");
bClosedObj=sal_True;
}
@@ -101,23 +99,23 @@ SdrRectObj::SdrRectObj(SdrObjKind eNewTextKind, const
Rectangle& rRect)
{
DBG_ASSERT(eTextKind==OBJ_TEXT || eTextKind==OBJ_TEXTEXT ||
eTextKind==OBJ_OUTLINETEXT ||
eTextKind==OBJ_TITLETEXT,
- "SdrRectObj::SdrRectObj(SdrObjKind,...) ist nur fuer
Textrahmen gedacht");
+ "SdrRectObj::SdrRectObj(SdrObjKind,...) ist nur für
Textrahmen gedacht");
bClosedObj=sal_True;
}
SdrRectObj::SdrRectObj(SdrObjKind eNewTextKind, const Rectangle& rNewRect,
SvStream& rInput, const String& rBaseURL, sal_uInt16 eFormat)
-: SdrTextObj(eNewTextKind,rNewRect,rInput,rBaseURL,eFormat),
+: SdrTextObj(eNewTextKind,rNewRect,rInput,rBaseURL,eFormat),
mpXPoly(NULL)
{
DBG_ASSERT(eTextKind==OBJ_TEXT || eTextKind==OBJ_TEXTEXT ||
eTextKind==OBJ_OUTLINETEXT ||
eTextKind==OBJ_TITLETEXT,
- "SdrRectObj::SdrRectObj(SdrObjKind,...) ist nur fuer
Textrahmen gedacht");
+ "SdrRectObj::SdrRectObj(SdrObjKind,...) ist nur für
Textrahmen gedacht");
bClosedObj=sal_True;
}
SdrRectObj::~SdrRectObj()
{
- if(mpXPoly)
+ if(mpXPoly)
{
delete mpXPoly;
}
@@ -125,7 +123,7 @@ SdrRectObj::~SdrRectObj()
void SdrRectObj::SetXPolyDirty()
{
- if(mpXPoly)
+ if(mpXPoly)
{
delete mpXPoly;
mpXPoly = 0L;
@@ -141,19 +139,19 @@ FASTBOOL SdrRectObj::PaintNeedsXPoly(long nEckRad) const
XPolygon SdrRectObj::ImpCalcXPoly(const Rectangle& rRect1, long nRad1) const
{
XPolygon aXPoly(rRect1,nRad1,nRad1);
- const sal_uInt16 nPointAnz(aXPoly.GetPointCount());
- XPolygon aNeuPoly(nPointAnz+1);
- sal_uInt16 nShift=nPointAnz-2;
- if (nRad1!=0) nShift=nPointAnz-5;
+ const sal_uInt16 nPointCount(aXPoly.GetPointCount());
+ XPolygon aNeuPoly(nPointCount+1);
+ sal_uInt16 nShift=nPointCount-2;
+ if (nRad1!=0) nShift=nPointCount-5;
sal_uInt16 j=nShift;
- for (sal_uInt16 i=1; i<nPointAnz; i++) {
+ for (sal_uInt16 i=1; i<nPointCount; i++) {
aNeuPoly[i]=aXPoly[j];
aNeuPoly.SetFlags(i,aXPoly.GetFlags(j));
j++;
- if (j>=nPointAnz) j=1;
+ if (j>=nPointCount) j=1;
}
aNeuPoly[0]=rRect1.BottomCenter();
- aNeuPoly[nPointAnz]=aNeuPoly[0];
+ aNeuPoly[nPointCount]=aNeuPoly[0];
aXPoly=aNeuPoly;
// Die Winkelangaben beziehen sich immer auf die linke obere Ecke von
!aRect!
@@ -169,7 +167,7 @@ void SdrRectObj::RecalcXPoly()
const XPolygon& SdrRectObj::GetXPoly() const
{
- if(!mpXPoly)
+ if(!mpXPoly)
{
((SdrRectObj*)this)->RecalcXPoly();
}
@@ -183,10 +181,10 @@ void SdrRectObj::TakeObjInfo(SdrObjTransformInfoRec&
rInfo) const
rInfo.bResizeFreeAllowed=bNoTextFrame || aGeo.nDrehWink%9000==0;
rInfo.bResizePropAllowed=sal_True;
rInfo.bRotateFreeAllowed=sal_True;
- rInfo.bRotate90Allowed =sal_True;
+ rInfo.bRotate90Allowed =sal_True;
rInfo.bMirrorFreeAllowed=bNoTextFrame;
- rInfo.bMirror45Allowed =bNoTextFrame;
- rInfo.bMirror90Allowed =bNoTextFrame;
+ rInfo.bMirror45Allowed =bNoTextFrame;
+ rInfo.bMirror90Allowed =bNoTextFrame;
// allow transparence
rInfo.bTransparenceAllowed = sal_True;
@@ -195,15 +193,15 @@ void SdrRectObj::TakeObjInfo(SdrObjTransformInfoRec&
rInfo) const
XFillStyle eFillStyle =
((XFillStyleItem&)(GetObjectItem(XATTR_FILLSTYLE))).GetValue();
rInfo.bGradientAllowed = (eFillStyle == XFILL_GRADIENT);
- rInfo.bShearAllowed =bNoTextFrame;
+ rInfo.bShearAllowed =bNoTextFrame;
rInfo.bEdgeRadiusAllowed=sal_True;
FASTBOOL bCanConv=!HasText() || ImpCanConvTextToCurve();
if (bCanConv && !bNoTextFrame && !HasText()) {
bCanConv=HasFill() || HasLine();
}
- rInfo.bCanConvToPath =bCanConv;
- rInfo.bCanConvToPoly =bCanConv;
+ rInfo.bCanConvToPath =bCanConv;
+ rInfo.bCanConvToPoly =bCanConv;
rInfo.bCanConvToContour = (rInfo.bCanConvToPoly ||
LineGeometryUsageIsNecessary());
}
@@ -241,8 +239,8 @@ void SdrRectObj::TakeObjNameSingul(XubString& rName) const
{
sal_uInt16 nResId=STR_ObjNameSingulRECT;
if (aGeo.nShearWink!=0) {
- nResId+=4; // Parallelogramm oder Raute
- // Raute ist nicht, weil Shear die vertikalen Kanten
verlaengert!
+ nResId+=4; // Parallelogramm oder Raute
+ // Raute ist nicht, weil Shear die vertikalen Kanten
verlängert!
// Wenn Zeit ist, werde ich das mal berechnen.
} else {
if (aRect.GetWidth()==aRect.GetHeight()) nResId+=2; //
Quadrat
@@ -267,7 +265,7 @@ void SdrRectObj::TakeObjNamePlural(XubString& rName) const
else {
sal_uInt16 nResId=STR_ObjNamePluralRECT;
if (aGeo.nShearWink!=0) {
- nResId+=4; // Parallelogramm oder Raute
+ nResId+=4; // Parallelogramm oder Raute
} else {
if (aRect.GetWidth()==aRect.GetHeight()) nResId+=2; //
Quadrat
}
@@ -312,7 +310,7 @@ void SdrRectObj::NbcSetLogicRect(const Rectangle& rRect)
sal_uInt32 SdrRectObj::GetHdlCount() const
{
- return IsTextFrame() ? 10 : 9;
+ return IsTextFrame() ? 10 : 9;
}
SdrHdl* SdrRectObj::GetHdl(sal_uInt32 nHdlNum) const
@@ -321,22 +319,22 @@ SdrHdl* SdrRectObj::GetHdl(sal_uInt32 nHdlNum) const
Point aPnt;
SdrHdlKind eKind = HDL_MOVE;
- if(!IsTextFrame())
- {
- nHdlNum++;
- }
+ if(!IsTextFrame())
+ {
+ nHdlNum++;
+ }
- switch(nHdlNum)
- {
- case 0:
- {
+ switch(nHdlNum)
+ {
+ case 0:
+ {
OSL_ENSURE(!IsTextEditActive(), "Do not use a ImpTextframeHdl for
hilighting text in active text edit, this will collide with EditEngine paints
(!)");
pH = new ImpTextframeHdl(aRect);
pH->SetObj((SdrObject*)this);
pH->SetDrehWink(aGeo.nDrehWink);
break;
}
- case 1:
+ case 1:
{
long a = GetEckenradius();
long b = Max(aRect.GetWidth(),aRect.GetHeight())/2; // Wird
aufgerundet, da GetWidth() eins draufaddiert
@@ -346,35 +344,35 @@ SdrHdl* SdrRectObj::GetHdl(sal_uInt32 nHdlNum) const
aPnt.X()+=a;
eKind = HDL_CIRC;
break;
- }
- case 2: aPnt=aRect.TopLeft(); eKind = HDL_UPLFT; break; // Oben
links
- case 3: aPnt=aRect.TopCenter(); eKind = HDL_UPPER; break; // Oben
- case 4: aPnt=aRect.TopRight(); eKind = HDL_UPRGT; break; // Oben
rechts
- case 5: aPnt=aRect.LeftCenter(); eKind = HDL_LEFT ; break; // Links
- case 6: aPnt=aRect.RightCenter(); eKind = HDL_RIGHT; break; // Rechts
- case 7: aPnt=aRect.BottomLeft(); eKind = HDL_LWLFT; break; // Unten
links
- case 8: aPnt=aRect.BottomCenter(); eKind = HDL_LOWER; break; // Unten
- case 9: aPnt=aRect.BottomRight(); eKind = HDL_LWRGT; break; // Unten
rechts
- }
+ }
+ case 2: aPnt=aRect.TopLeft(); eKind = HDL_UPLFT; break; //
Oben links
+ case 3: aPnt=aRect.TopCenter(); eKind = HDL_UPPER; break; //
Oben
+ case 4: aPnt=aRect.TopRight(); eKind = HDL_UPRGT; break; //
Oben rechts
+ case 5: aPnt=aRect.LeftCenter(); eKind = HDL_LEFT ; break; //
Left
+ case 6: aPnt=aRect.RightCenter(); eKind = HDL_RIGHT; break; //
Right
+ case 7: aPnt=aRect.BottomLeft(); eKind = HDL_LWLFT; break; //
Unten links
+ case 8: aPnt=aRect.BottomCenter(); eKind = HDL_LOWER; break; //
Unten
+ case 9: aPnt=aRect.BottomRight(); eKind = HDL_LWRGT; break; //
Unten rechts
+ }
- if(!pH)
- {
- if(aGeo.nShearWink)
- {
- ShearPoint(aPnt,aRect.TopLeft(),aGeo.nTan);
- }
+ if(!pH)
+ {
+ if(aGeo.nShearWink)
+ {
+ ShearPoint(aPnt,aRect.TopLeft(),aGeo.nTan);
+ }
- if(aGeo.nDrehWink)
- {
- RotatePoint(aPnt,aRect.TopLeft(),aGeo.nSin,aGeo.nCos);
- }
+ if(aGeo.nDrehWink)
+ {
+ RotatePoint(aPnt,aRect.TopLeft(),aGeo.nSin,aGeo.nCos);
+ }
pH = new SdrHdl(aPnt,eKind);
pH->SetObj((SdrObject*)this);
pH->SetDrehWink(aGeo.nDrehWink);
}
- return pH;
+ return pH;
}
////////////////////////////////////////////////////////////////////////////////////////////////////
@@ -388,52 +386,52 @@ bool SdrRectObj::beginSpecialDrag(SdrDragStat& rDrag)
const
{
const bool bRad(rDrag.GetHdl() && HDL_CIRC ==
rDrag.GetHdl()->GetKind());
- if(bRad)
- {
+ if(bRad)
+ {
rDrag.SetEndDragChangesAttributes(true);
- return true;
- }
+ return true;
+ }
- return SdrTextObj::beginSpecialDrag(rDrag);
+ return SdrTextObj::beginSpecialDrag(rDrag);
}
bool SdrRectObj::applySpecialDrag(SdrDragStat& rDrag)
{
const bool bRad(rDrag.GetHdl() && HDL_CIRC ==
rDrag.GetHdl()->GetKind());
- if (bRad)
- {
- Rectangle aBoundRect0;
+ if (bRad)
+ {
+ Rectangle aBoundRect0;
Point aPt(rDrag.GetNow());
- if(aGeo.nDrehWink)
- RotatePoint(aPt,aRect.TopLeft(),-aGeo.nSin,aGeo.nCos);
+ if(aGeo.nDrehWink)
+ RotatePoint(aPt,aRect.TopLeft(),-aGeo.nSin,aGeo.nCos);
sal_Int32 nRad(aPt.X() - aRect.Left());
- if (nRad < 0)
- nRad = 0;
+ if (nRad < 0)
+ nRad = 0;
- if(nRad != GetEckenradius())
- {
- NbcSetEckenradius(nRad);
- }
-
- return true;
- }
- else
- {
- return SdrTextObj::applySpecialDrag(rDrag);
- }
+ if(nRad != GetEckenradius())
+ {
+ NbcSetEckenradius(nRad);
+ }
+
+ return true;
+ }
+ else
+ {
+ return SdrTextObj::applySpecialDrag(rDrag);
+ }
}
String SdrRectObj::getSpecialDragComment(const SdrDragStat& rDrag) const
{
- const bool bCreateComment(rDrag.GetView() && this ==
rDrag.GetView()->GetCreateObj());
+ const bool bCreateComment(rDrag.GetView() && this ==
rDrag.GetView()->GetCreateObj());
- if(bCreateComment)
- {
+ if(bCreateComment)
+ {
return String();
}
else
@@ -444,7 +442,7 @@ String SdrRectObj::getSpecialDragComment(const SdrDragStat&
rDrag) const
{
Point aPt(rDrag.GetNow());
- // -sin fuer Umkehrung
+ // -sin für Umkehrung
if(aGeo.nDrehWink)
RotatePoint(aPt, aRect.TopLeft(), -aGeo.nSin,
aGeo.nCos);
@@ -460,13 +458,13 @@ String SdrRectObj::getSpecialDragComment(const
SdrDragStat& rDrag) const
aStr += GetMetrStr(nRad);
aStr += sal_Unicode(')');
- return aStr;
- }
- else
- {
- return SdrTextObj::getSpecialDragComment(rDrag);
- }
- }
+ return aStr;
+ }
+ else
+ {
+ return SdrTextObj::getSpecialDragComment(rDrag);
+ }
+ }
}
////////////////////////////////////////////////////////////////////////////////////////////////////
@@ -531,7 +529,7 @@ XubString SdrRectObj::GetMacroPopupComment(const
SdrObjMacroHitRec& rRec) const
SdrGluePoint SdrRectObj::GetVertexGluePoint(sal_uInt16 nPosNum) const
{
sal_Int32 nWdt = ImpGetLineWdt(); // #i25616#
((XLineWidthItem&)(GetObjectItem(XATTR_LINEWIDTH))).GetValue();
-
+
// #i25616#
if(!LineIsOutsideGeometry())
{
@@ -557,7 +555,7 @@ SdrGluePoint SdrRectObj::GetVertexGluePoint(sal_uInt16
nPosNum) const
SdrGluePoint SdrRectObj::GetCornerGluePoint(sal_uInt16 nPosNum) const
{
sal_Int32 nWdt = ImpGetLineWdt(); // #i25616#
((XLineWidthItem&)(GetObjectItem(XATTR_LINEWIDTH))).GetValue();
-
+
// #i25616#
if(!LineIsOutsideGeometry())
{
@@ -583,27 +581,27 @@ SdrGluePoint SdrRectObj::GetCornerGluePoint(sal_uInt16
nPosNum) const
SdrObject* SdrRectObj::DoConvertToPolyObj(sal_Bool bBezier, bool bAddText)
const
{
XPolygon aXP(ImpCalcXPoly(aRect,GetEckenradius()));
- { // #40608# Nur Uebergangsweise bis zum neuen TakeContour()
+ { // #40608# Nur übergangsweise bis zum neuen TakeContour()
aXP.Remove(0,1);
aXP[aXP.GetPointCount()-1]=aXP[0];
}
basegfx::B2DPolyPolygon aPolyPolygon(aXP.getB2DPolygon());
- aPolyPolygon.removeDoublePoints();
+ aPolyPolygon.removeDoublePoints();
SdrObject* pRet = 0L;
-
- // small correction: Do not create something when no fill and no line. To
- // be sure to not damage something with non-text frames, do this only
- // when used with bAddText==false from other converters
- if((bAddText && !IsTextFrame()) || HasFill() || HasLine())
+
+ // small correction: Do not create something when no fill and no line.
To
+ // be sure to not damage something with non-text frames, do this only
+ // when used with bAddText==false from other converters
+ if((bAddText && !IsTextFrame()) || HasFill() || HasLine())
{
pRet = ImpConvertMakeObj(aPolyPolygon, sal_True, bBezier);
}
- if(bAddText)
- {
- pRet = ImpConvertAddText(pRet, bBezier);
- }
+ if(bAddText)
+ {
+ pRet = ImpConvertAddText(pRet, bBezier);
+ }
return pRet;
}
@@ -620,4 +618,4 @@ void SdrRectObj::RestGeoData(const SdrObjGeoData& rGeo)
SetXPolyDirty();
}
-// eof
+/* vim: set noet sw=4 ts=4: */
diff --git a/main/svx/source/svdraw/svdtrans.cxx
b/main/svx/source/svdraw/svdtrans.cxx
index 1cacf901bb..f47057ff64 100644
--- a/main/svx/source/svdraw/svdtrans.cxx
+++ b/main/svx/source/svdraw/svdtrans.cxx
@@ -399,19 +399,19 @@ double CrookStretchXPoint(Point& rPnt, Point* pC1, Point*
pC2, const Point& rCen
void CrookRotatePoly(XPolygon& rPoly, const Point& rCenter, const Point& rRad,
FASTBOOL bVert)
{
double nSin,nCos;
- sal_uInt16 nPointAnz=rPoly.GetPointCount();
+ sal_uInt16 nPointCount=rPoly.GetPointCount();
sal_uInt16 i=0;
- while (i<nPointAnz) {
+ while (i<nPointCount) {
Point* pPnt=&rPoly[i];
Point* pC1=NULL;
Point* pC2=NULL;
- if (i+1<nPointAnz && rPoly.IsControl(i)) { // Kontrollpunkt
links
+ if (i+1<nPointCount && rPoly.IsControl(i)) { // Kontrollpunkt
links
pC1=pPnt;
i++;
pPnt=&rPoly[i];
}
i++;
- if (i<nPointAnz && rPoly.IsControl(i)) { // Kontrollpunkt rechts
+ if (i<nPointCount && rPoly.IsControl(i)) { // Kontrollpunkt
rechts
pC2=&rPoly[i];
i++;
}
@@ -422,19 +422,19 @@ void CrookRotatePoly(XPolygon& rPoly, const Point&
rCenter, const Point& rRad, F
void CrookSlantPoly(XPolygon& rPoly, const Point& rCenter, const Point& rRad,
FASTBOOL bVert)
{
double nSin,nCos;
- sal_uInt16 nPointAnz=rPoly.GetPointCount();
+ sal_uInt16 nPointCount=rPoly.GetPointCount();
sal_uInt16 i=0;
- while (i<nPointAnz) {
+ while (i<nPointCount) {
Point* pPnt=&rPoly[i];
Point* pC1=NULL;
Point* pC2=NULL;
- if (i+1<nPointAnz && rPoly.IsControl(i)) { // Kontrollpunkt
links
+ if (i+1<nPointCount && rPoly.IsControl(i)) { // Kontrollpunkt
links
pC1=pPnt;
i++;
pPnt=&rPoly[i];
}
i++;
- if (i<nPointAnz && rPoly.IsControl(i)) { // Kontrollpunkt rechts
+ if (i<nPointCount && rPoly.IsControl(i)) { // Kontrollpunkt
rechts
pC2=&rPoly[i];
i++;
}
@@ -445,19 +445,19 @@ void CrookSlantPoly(XPolygon& rPoly, const Point&
rCenter, const Point& rRad, FA
void CrookStretchPoly(XPolygon& rPoly, const Point& rCenter, const Point&
rRad, FASTBOOL bVert, const Rectangle rRefRect)
{
double nSin,nCos;
- sal_uInt16 nPointAnz=rPoly.GetPointCount();
+ sal_uInt16 nPointCount=rPoly.GetPointCount();
sal_uInt16 i=0;
- while (i<nPointAnz) {
+ while (i<nPointCount) {
Point* pPnt=&rPoly[i];
Point* pC1=NULL;
Point* pC2=NULL;
- if (i+1<nPointAnz && rPoly.IsControl(i)) { // Kontrollpunkt
links
+ if (i+1<nPointCount && rPoly.IsControl(i)) { // Kontrollpunkt
links
pC1=pPnt;
i++;
pPnt=&rPoly[i];
}
i++;
- if (i<nPointAnz && rPoly.IsControl(i)) { // Kontrollpunkt rechts
+ if (i<nPointCount && rPoly.IsControl(i)) { // Kontrollpunkt
rechts
pC2=&rPoly[i];
i++;
}
