NO-JIRA - Updated version references in the artifacts. Removed doc/new-book due to embedded references to version 0.8.0.
Project: http://git-wip-us.apache.org/repos/asf/qpid-dispatch/repo Commit: http://git-wip-us.apache.org/repos/asf/qpid-dispatch/commit/acf82fb5 Tree: http://git-wip-us.apache.org/repos/asf/qpid-dispatch/tree/acf82fb5 Diff: http://git-wip-us.apache.org/repos/asf/qpid-dispatch/diff/acf82fb5 Branch: refs/heads/1.0.x Commit: acf82fb5536c2dd405fcdd6aeae8078371d0ab2e Parents: 5f3eaff Author: Ted Ross <[email protected]> Authored: Thu Oct 19 13:45:48 2017 -0400 Committer: Ted Ross <[email protected]> Committed: Thu Oct 19 13:45:48 2017 -0400 ---------------------------------------------------------------------- README | 4 +- console/dispatch-dashboard/setup.py | 3 +- console/hawtio/pom.xml | 4 +- doc/new-book/attributes.adoc | 75 -- doc/new-book/book.adoc | 67 -- doc/new-book/common | 1 - doc/new-book/configuration-connections.adoc | 87 --- doc/new-book/configuration-reference.adoc | 224 ------ doc/new-book/configuration-security.adoc | 336 --------- doc/new-book/cyrus-sasl.adoc | 90 --- doc/new-book/getting-started.adoc | 156 ----- doc/new-book/images/01-peer-to-peer.png | Bin 20101 -> 0 bytes doc/new-book/images/balanced-routing.png | Bin 43261 -> 0 bytes doc/new-book/images/brokered-messaging.png | Bin 50206 -> 0 bytes doc/new-book/images/closest-routing.png | Bin 39803 -> 0 bytes doc/new-book/images/console1.png | Bin 40412 -> 0 bytes doc/new-book/images/console_charts.png | Bin 70070 -> 0 bytes doc/new-book/images/console_entity.png | Bin 69319 -> 0 bytes doc/new-book/images/console_login.png | Bin 39915 -> 0 bytes doc/new-book/images/console_overview.png | Bin 87960 -> 0 bytes doc/new-book/images/console_schema.png | Bin 68025 -> 0 bytes doc/new-book/images/console_topology.png | Bin 67338 -> 0 bytes doc/new-book/images/link-routing.png | Bin 46968 -> 0 bytes doc/new-book/images/message-routing.png | Bin 35861 -> 0 bytes doc/new-book/images/multicast-routing.png | Bin 44923 -> 0 bytes doc/new-book/images/path-redundancy-01.png | Bin 47995 -> 0 bytes doc/new-book/images/path-redundancy-02.png | Bin 42131 -> 0 bytes .../path-redundancy-temp-decoupling-01.png | Bin 47766 -> 0 bytes .../path-redundancy-temp-decoupling-02.png | Bin 49105 -> 0 bytes doc/new-book/images/sharded-queue-01.png | Bin 28383 -> 0 bytes doc/new-book/images/sharded-queue-02.png | Bin 62233 -> 0 bytes doc/new-book/introduction.adoc | 124 ---- doc/new-book/logging.adoc | 346 --------- doc/new-book/management-entities.adoc | 24 - doc/new-book/management.adoc | 38 - doc/new-book/managing-using-qdmanage.adoc | 671 ------------------ doc/new-book/monitoring-using-qdstat.adoc | 392 ----------- doc/new-book/policy.adoc | 366 ---------- doc/new-book/reliability.adoc | 701 ------------------- doc/new-book/revision-info.adoc | 20 - doc/new-book/routing.adoc | 693 ------------------ .../technical-details-specifications.adoc | 190 ----- doc/new-book/theory_of_operation.adoc | 344 --------- .../understand-router-configuration.adoc | 206 ------ doc/new-book/using-console.adoc | 126 ---- pom.xml | 4 +- 46 files changed, 8 insertions(+), 5284 deletions(-) ---------------------------------------------------------------------- http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/README ---------------------------------------------------------------------- diff --git a/README b/README index 641ee64..513d9d4 100644 --- a/README +++ b/README @@ -10,8 +10,8 @@ Dependencies To build dispatch on a yum-based Linux system, you will need the following packages installed: -- qpid-proton-c-devel (0.15 or later) -- python-qpid-proton (0.15 or later) +- qpid-proton-c-devel (0.18 or later) +- python-qpid-proton (0.18 or later) - cmake - make - gcc http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/console/dispatch-dashboard/setup.py ---------------------------------------------------------------------- diff --git a/console/dispatch-dashboard/setup.py b/console/dispatch-dashboard/setup.py index 78e838d..2678275 100644 --- a/console/dispatch-dashboard/setup.py +++ b/console/dispatch-dashboard/setup.py @@ -19,7 +19,8 @@ setup( name = 'dispatch', version = '0.0.1', description = 'dashboard extension for OpenStack Dashboard', - author = 'Redhat', + author = 'Apache Qpid', + author_email = '[email protected]', classifiers = [ 'Environment :: OpenStack', 'Framework :: Django', http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/console/hawtio/pom.xml ---------------------------------------------------------------------- diff --git a/console/hawtio/pom.xml b/console/hawtio/pom.xml index ab594f1..fe2c668 100644 --- a/console/hawtio/pom.xml +++ b/console/hawtio/pom.xml @@ -24,9 +24,9 @@ <groupId>org.apache.qpid</groupId> <artifactId>dispatch-hawtio-console</artifactId> - <version>1.0.0-SNAPSHOT</version> + <version>1.0.0</version> <packaging>war</packaging> - <inceptionYear>2016</inceptionYear> + <inceptionYear>2017</inceptionYear> <url>https://qpid.apache.org</url> <description> http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/attributes.adoc ---------------------------------------------------------------------- diff --git a/doc/new-book/attributes.adoc b/doc/new-book/attributes.adoc deleted file mode 100644 index 6492bff..0000000 --- a/doc/new-book/attributes.adoc +++ /dev/null @@ -1,75 +0,0 @@ -//// -Licensed to the Apache Software Foundation (ASF) under one -or more contributor license agreements. See the NOTICE file -distributed with this work for additional information -regarding copyright ownership. The ASF licenses this file -to you under the Apache License, Version 2.0 (the -"License"); you may not use this file except in compliance -with the License. You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - -Unless required by applicable law or agreed to in writing, -software distributed under the License is distributed on an -"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY -KIND, either express or implied. See the License for the -specific language governing permissions and limitations -under the License -//// - -// Standard document attributes - -:data-uri!: -:doctype: article -:experimental: -:idprefix: -:imagesdir: images -:numbered: -:sectanchors!: -:sectnums: -:source-highlighter: highlightjs -:highlightjs-theme: solarized_dark -:toc: left -:linkattrs: -:toclevels: 3 - -// Component attributes - -:ProductName: Apache Qpid -:RouterLongName: {ProductName} Dispatch Router -:ClientAmqpPythonName: {ProductName} Proton Python -:ConsoleName: {RouterLongName} Console -:FragmentDir: common -:RouterName: Dispatch Router -:RouterSchemaDir: ../../build/doc/book -:RouterVersion: 0.8 - -// Book names - -:RouterBook: Using {RouterLongName} - -// Doc links - -:BookUrlBase: https://qpid.apache.org/releases/qpid-dispatch-0.8.0 - -:ManagementEntitiesUrl: {BookUrlBase}/man/managementschema.html -:ManagementEntitiesLink: link:{ManagementEntitiesUrl}[{RouterName} Management Schema] - -:RouterBookUrl: {BookUrlBase}/book/book.html -:RouterBookLink: link:{RouterBookUrl}[{RouterBook}] - -:qdmanageManPageUrl: {BookUrlBase}/man/qdmanage.html -:qdmanageManPageLink: link:{qdmanageManPageUrl}[qdmanage man page] - -:qdrouterdManPageUrl: {BookUrlBase}/man/qdrouterd.html -:qdrouterdManPageLink: link:{qdrouterdManPageUrl}[qdrouterd man page] - -:qdstatManPageUrl: {BookUrlBase}/man/qdstat.html -:qdstatManPageLink: link:{qdstatManPageUrl}[qdstat man page] - -:ClientAmqpPythonUrl: https://qpid.apache.org/proton/ - -// Other links - -:AmqpSpecUrl: http://docs.oasis-open.org/amqp/core/v1.0/os/amqp-core-overview-v1.0-os.html -:AmqpSpecLink: link:{AmqpSpecUrl}[AMQP 1.0 specification] http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/book.adoc ---------------------------------------------------------------------- diff --git a/doc/new-book/book.adoc b/doc/new-book/book.adoc deleted file mode 100644 index f84a1c2..0000000 --- a/doc/new-book/book.adoc +++ /dev/null @@ -1,67 +0,0 @@ -//// -Licensed to the Apache Software Foundation (ASF) under one -or more contributor license agreements. See the NOTICE file -distributed with this work for additional information -regarding copyright ownership. The ASF licenses this file -to you under the Apache License, Version 2.0 (the -"License"); you may not use this file except in compliance -with the License. You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - -Unless required by applicable law or agreed to in writing, -software distributed under the License is distributed on an -"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY -KIND, either express or implied. See the License for the -specific language governing permissions and limitations -under the License -//// - -include::attributes.adoc[] - -= {RouterBook} - -// Introduction -include::introduction.adoc[leveloffset=+1] - -// Theory of Operation -include::theory_of_operation.adoc[leveloffset=+1] - -// Getting Started -include::getting-started.adoc[leveloffset=+1] - -// Configuration -include::understand-router-configuration.adoc[leveloffset=+1] - -// Network Connections -include::configuration-connections.adoc[leveloffset=+1] - -// Security -include::configuration-security.adoc[leveloffset=+1] - -// Routing -include::routing.adoc[leveloffset=+1] - -// Logging -include::logging.adoc[leveloffset=+1] - -// Policies -include::policy.adoc[leveloffset=+1] - -// Management -include::management.adoc[leveloffset=+1] - -// Reliability -include::reliability.adoc[leveloffset=+1] - -// Technical Details and Specifications -include::technical-details-specifications.adoc[leveloffset=+1] - -[appendix] -include::cyrus-sasl.adoc[leveloffset=+1] - -[appendix] -include::configuration-reference.adoc[leveloffset=+1] - -// Revision information -include::revision-info.adoc[] http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/common ---------------------------------------------------------------------- diff --git a/doc/new-book/common b/doc/new-book/common deleted file mode 120000 index 8332399..0000000 --- a/doc/new-book/common +++ /dev/null @@ -1 +0,0 @@ -../common/ \ No newline at end of file http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/configuration-connections.adoc ---------------------------------------------------------------------- diff --git a/doc/new-book/configuration-connections.adoc b/doc/new-book/configuration-connections.adoc deleted file mode 100644 index eaed602..0000000 --- a/doc/new-book/configuration-connections.adoc +++ /dev/null @@ -1,87 +0,0 @@ -//// -Licensed to the Apache Software Foundation (ASF) under one -or more contributor license agreements. See the NOTICE file -distributed with this work for additional information -regarding copyright ownership. The ASF licenses this file -to you under the Apache License, Version 2.0 (the -"License"); you may not use this file except in compliance -with the License. You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - -Unless required by applicable law or agreed to in writing, -software distributed under the License is distributed on an -"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY -KIND, either express or implied. See the License for the -specific language governing permissions and limitations -under the License -//// - -[[router_network_connections]] -= Network Connections - -Connections define how the router communicates with clients, other routers, and brokers. You can configure _incoming connections_ to define how the router listens for data from clients and other routers, and you can configure _outgoing connections_ to define how the router sends data to other routers and brokers. - -[[adding_incoming_connections]] -== Listening for Incoming Connections - -Listening for incoming connections involves setting the host and port on which the router should listen for traffic. - -.Procedure - -. In the router's configuration file, add a `listener`: -+ --- -[options="nowrap",subs="+quotes"] ----- -listener { - host: _HOST_NAME/ADDRESS_ - port: _PORT_NUMBER/NAME_ - ... -} ----- - -`host`:: Either an IP address (IPv4 or IPv6) or hostname on which the router should listen for incoming connections. -`port`:: The port number or symbolic service name on which the router should listen for incoming connections. - -For information about additional attributes, see xref:router_configuration_file_listener[Listener] in the _Configuration Reference_. --- - -. If necessary, xref:securing_incoming_connections[secure the connection]. -+ -If you have set up SSL/TLS or SASL in your environment, you can configure the router to only accept encrypted or authenticated communication on this connection. - -. If you want the router to listen for incoming connections on additional hosts or ports, configure an additional `listener` entity for each host and port. - -[[adding_outgoing_connections]] -== Adding Outgoing Connections - -Configuring outgoing connections involves setting the host and port on which the router should connect to other routers and brokers. - -.Procedure - -. In the router's configuration file, add a `connector`: -+ --- -[options="nowrap",subs="+quotes"] ----- -connector { - name: _NAME_ - host: _HOST_NAME/ADDRESS_ - port: _PORT_NUMBER/NAME_ - ... -} ----- - -`name`:: The name of the `connector`. You should specify a name that describes the entity to which the connector connects. This name is used by configured addresses (for example, a `linkRoute` entity) in order to specify which connection should be used for them. -`host`:: Either an IP address (IPv4 or IPv6) or hostname on which the router should connect. -`port`:: The port number or symbolic service name on which the router should connect. - -For information about additional attributes, see xref:router_configuration_file_connector[Connector] in the _Configuration Reference_. --- - -. If necessary, xref:securing_outgoing_connections[secure the connection]. -+ -If you have set up SSL/TLS or SASL in your environment, you can configure the router to only send encrypted or authenticated communication on this connection. - -. For each remaining router or broker to which this router should connect, configure an additional `connector` entity. http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/configuration-reference.adoc ---------------------------------------------------------------------- diff --git a/doc/new-book/configuration-reference.adoc b/doc/new-book/configuration-reference.adoc deleted file mode 100644 index 6ccbd16..0000000 --- a/doc/new-book/configuration-reference.adoc +++ /dev/null @@ -1,224 +0,0 @@ -//// -Licensed to the Apache Software Foundation (ASF) under one -or more contributor license agreements. See the NOTICE file -distributed with this work for additional information -regarding copyright ownership. The ASF licenses this file -to you under the Apache License, Version 2.0 (the -"License"); you may not use this file except in compliance -with the License. You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - -Unless required by applicable law or agreed to in writing, -software distributed under the License is distributed on an -"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY -KIND, either express or implied. See the License for the -specific language governing permissions and limitations -under the License -//// - -[[router_configuration_reference]] - -// This config reference could stand to be cleaned up. Also, some of the introductory content is no longer necessary since it's covered in the introductory chapter about configuration. We should just link to it instead of repeating it here. - -= Configuration Reference - -The {RouterName} component behavior is totally configurable using a configuration file which can be passed as parameter (with the `--conf` option) on the command line when running it. After installation, a default configuration file is placed at the following path : - -[options="nowrap"] ----- -[install-prefix]/etc/qpid-dispatch/qdrouterd.conf ----- - -This file is used when the router is started without specify configuration file path on the command line and when it is started as a service. In case of starting router on the command line the configuration file can be placed anywhere on the file system. - -== Configuration File - -The configuration file is made up of sections with following syntax : - -[options="nowrap"] ----- -sectionName { - attributeName: attributeValue - attributeName: attributeValue - ... -} ----- - -A section could be referenced by another section using its `name` attribute. An example is the _sslProfile_ section which describes attributes for setting SSL/TLS configuration and can be applied to one or more _listener_ and _connector_ sections. - -[options="nowrap"] ----- -sslProfile { - name: ssl-profile-one - certDb: ca-certificate-1.pem - certFile: server-certificate-1.pem - keyFile: server-private-key.pem -} - -listener { - sslProfile: ssl-profile-one - host: 0.0.0.0 - port: amqp - saslMechanisms: ANONYMOUS -} ----- - -In the above example, the _sslProfile_ section named _ssl-profile-one_ is used to define the _sslProfile_ attribute for the _listener_ section. - -=== Configuration Sections - -[[router_configuration_file_sslprofile]] -==== sslProfile - -Attributes for setting SSL/TLS configuration for connections. - -* *_certDb_* (path) : The absolute path to the database that contains the public certificates of trusted certificate authorities (CA). -* *_certFile_* (path) : The absolute path to the file containing the PEM-formatted public certificate to be used on the local end of any connections using this profile. -* *_keyFile_* (path) : The absolute path to the file containing the PEM-formatted private key for the above certificate. -* *_passwordFile_* (path) : If the above private key is password protected, this is the absolute path to a file containing the password that unlocks the certificate key. -* *_password_* (string) : An alternative to storing the password in a file referenced by passwordFile is to supply the password right here in the configuration file. This option can be used by supplying the password in the âpasswordâ option. Donât use both password and passwordFile in the same profile. -* *_uidFormat_* (string) : A list of x509 client certificate fields that will be used to build a string that will uniquely identify the client certificate owner. For example, a value of âcouâ indicates that the uid will consist of c - common name concatenated with o - organization-company name concatenated with u - organization unit; or a value of âoFâ indicates that the uid will consist of o (organization name) concatenated with F (the sha256 fingerprint of the entire certificate) . Allowed values can be any combination of comma separated âcâ( ISO3166 two character country code), âsâ(state or province), âlâ(Locality; generally - city), âoâ(Organization - Company Name), âuâ(Organization Unit - typically certificate type or brand), ânâ(CommonName - typically a username for client certificates) and â1â(sha1 certificate fingerprint, as displayed in the fingerprints section when looking at a certificate with say a web browser is the hash of the entire certificate) and 2 (sha256 certificate fingerprint) and 5 (sha512 certificate fingerprint). -* *_displayNameFile_* (string) : The absolute path to the file containing the unique id to display name mapping. -* *_name_* (string) : The name of the profile used for referencing it from _listener_ and _connector_ sections. - -*Used by* : _listener_, _connector_. - -[[router_configuration_file_router]] -==== router - -Describe main information about the router related to identity, internal processes and inter routers communication. - - -* *_id_* (string) : Routerâs unique identity. It is required and the router will fail to start without it. -* *_mode_* (One of [`standalone`, `interior`], default=`standalone`) : In standalone mode, the router operates as a single component. It does not participate in the routing protocol and therefore will not cooperate with other routers. In interior mode, the router operates in cooperation with other interior routers in an interconnected network. -* *_helloInterval_* (integer, default=`1`) : Interval in seconds between HELLO messages sent to neighbor routers in order to announce its presence (as a keep alive). -* *_helloMaxAge_* (integer, default=`3`) : Time in seconds after which a neighbor router is declared lost if no HELLO is received. -* *_raInterval_* (integer, default=`30`) : Interval in seconds between Router-Advertisements sent to all routers in a stable network. -* *_raIntervalFlux_* (integer, default=`4`) : Interval in seconds between Router-Advertisements sent to all routers during topology fluctuations. -* *_remoteLsMaxAge_* (integer, default=`60`) : Time in seconds after which link state is declared stale if no RA is received. -* *_workerThreads_* (integer, default=`4`) : The number of threads that will be created to process message traffic and other application work (timers, non-amqp file descriptors, and so on). -* *_debugDump_* (path) : The absolute path for a file to dump debugging information that canât be logged normally. -* *_saslConfigPath_* (path) : The absolute path to the SASL configuration file. -* *_saslConfigName_* (string, default=`qdrouterd`) : Name of the SASL configuration. This string + â.confâ is the name of the configuration file. - -[[router_configuration_file_listener]] -==== listener - -Listens for incoming connections to the router. - -* *_host_* (string, default=`127.0.0.1`) : IP address: ipv4 or ipv6 literal or a hostname. -* *_port_* (string, default=`amqp`) : Port number or symbolic service name. -* *_protocolFamily_* (One of [`IPv4`, `IPv6`]) : IPv4: Internet Protocol version 4; IPv6: Internet Protocol version 6. If not specified, the protocol family will be automatically determined from the address. -* *_role_* (One of [`normal`, `inter-router`, `route-container`], default=`normal`) : The role of an established connection. In the normal role, the connection is assumed to be used for AMQP clients that are doing normal message delivery over the connection. In the inter-router role, the connection is assumed to be to another router in the network. Inter-router discovery and routing protocols can only be used over inter-router connections. The route-container role can be used for router-container connections, for example, a router-broker connection. -* *_cost_* (integer, default=`1`) : For the `inter-route` role only. This value assigns a cost metric to the inter-router connection. The default (and minimum) value is one. Higher values represent higher costs. The cost is used to influence the routing algorithm as it attempts to use the path with the lowest total cost from ingress to egress. -* *_saslMechanisms_* (string) : Space separated list of accepted SASL authentication mechanisms. -* *_authenticatePeer_* (boolean) : yes: Require the peerâs identity to be authenticated; no: Do not require any authentication. -* *_requireEncryption_* (boolean) : yes: Require the connection to the peer to be encrypted; no: Permit non-encrypted communication with the peer. It is related to SASL mechanisms which support encryption. -* *_requireSsl_* (boolean) : yes: Require the use of SSL/TLS on the connection; no: Allow clients to connect without SSL/TLS. -* *_trustedCerts_* (path) : This optional setting can be used to reduce the set of available CAs for client authentication. If used, this setting must provide an absolute path to a PEM file that contains the trusted certificates. -* *_maxFrameSize_* (integer, default=`16384`) : Defaults to 16384. If specified, it is the maximum frame size in octets that will be used in the connection-open negotiation with a connected peer. The frame size is the largest contiguous set of uninterrupted data that can be sent for a message delivery over the connection. Interleaving of messages on different links is done at frame granularity. -* *_idleTimeoutSeconds_* : (integer, default=`16`) : The idle timeout, in seconds, for connections through this listener. If no frames are received on the connection for this time interval, the connection shall be closed. -* *_stripAnnotations_* (One of [`in`, `out`, `both`, `no`], default=`both`) : in: Strip the dispatch router specific annotations only on ingress; out: Strip the dispatch router specific annotations only on egress; both: Strip the dispatch router specific annotations on both ingress and egress; no - do not strip dispatch router specific annotations. -* *_linkCapacity_* (integer) : The capacity of links within this connection, in terms of message deliveries. The capacity is the number of messages that can be in-flight concurrently for each link. -* *_sslProfile_* (string) : The name of the _sslProfile_ entity to use in order to have SSL/TLS configuration. -* *_http_* (boolean): If set to `yes`, the listener will accept HTTP connections using AMQP over WebSockets. - -[[router_configuration_file_connector]] -==== connector - -Establishes an outgoing connection from the router. - -* *_name_* (string) : Name using to reference the connector in the configuration file for example for a link routing to queue on a broker. -* *_host_* (string, default=`127.0.0.1`) : IP address: ipv4 or ipv6 literal or a hostname. -* *_port_* (string, default=`amqp`) : Port number or symbolic service name. -* *_protocolFamily_* (One of [`IPv4`, `IPv6`]) : IPv4: Internet Protocol version 4; IPv6: Internet Protocol version 6. If not specified, the protocol family will be automatically determined from the address. -* *_role_* (One of [`normal`, `inter-router`, `route-container`], default=`normal`) : The role of an established connection. In the normal role, the connection is assumed to be used for AMQP clients that are doing normal message delivery over the connection. In the inter-router role, the connection is assumed to be to another router in the network. Inter-router discovery and routing protocols can only be used over inter-router connections. route-container role can be used for router-container connections, for example, a router-broker connection. -* *_cost_* (integer, default=`1`) : For the âinter-routerâ role only. This value assigns a cost metric to the inter-router connection. The default (and minimum) value is one. Higher values represent higher costs. The cost is used to influence the routing algorithm as it attempts to use the path with the lowest total cost from ingress to egress. -* *_saslMechanisms_* (string) : Space separated list of accepted SASL authentication mechanisms. -* *_allowRedirect_* (boolean, default=True) : Allow the peer to redirect this connection to another address. -* *_maxFrameSize_* (integer, default=`65536`) : Maximum frame size in octets that will be used in the connection-open negotiation with a connected peer. The frame size is the largest contiguous set of uninterrupted data that can be sent for a message delivery over the connection. Interleaving of messages on different links is done at frame granularity. -* *_idleTimeoutSeconds_* (integer, default=`16`) : The idle timeout, in seconds, for connections through this connector. If no frames are received on the connection for this time interval, the connection shall be closed. -* *_stripAnnotations_* (One of [`in`, `out`, `both`, `no`], default=`both`) : in: Strip the dispatch router specific annotations only on ingress; out: Strip the dispatch router specific annotations only on egress; both: Strip the dispatch router specific annotations on both ingress and egress; no - do not strip dispatch router specific annotations. -* *_linkCapacity_* (integer) : The capacity of links within this connection, in terms of message deliveries. The capacity is the number of messages that can be in-flight concurrently for each link. -* *_verifyHostName_* (boolean, default=True) : yes: Ensures that when initiating a connection (as a client) the hostname in the URL to which this connector connects to matches the hostname in the digital certificate that the peer sends back as part of the SSL/TLS connection; no: Does not perform hostname verification -* *_saslUsername_* (string) : The username that the connector is using to connect to a peer. -* *_saslPassword_* (string) : The password that the connector is using to connect to a peer. -* *_sslProfile_* (string) : The name of the _sslProfile_ entity to use in order to have SSL/TLS configuration. - -[[router_configuration_file_log]] -==== log - -Configure logging for a particular module which is part of the router. You can use the UPDATE operation to change log settings while the router is running. - -* *_module_* (One of [`ROUTER`, `ROUTER_CORE`, `ROUTER_HELLO`, `ROUTER_LS`, `ROUTER_MA`, `MESSAGE`, `SERVER`, `AGENT`, `CONTAINER`, `ERROR`, `POLICY`, `DEFAULT`], required) : Module to configure. The special module `DEFAULT` specifies defaults for all modules. -* *_enable_* (string, default=`default`, required) Levels are: `trace`, `debug`, `info`, `notice`, `warning`, `error`, `critical`. The enable string is a comma-separated list of levels. A level may have a trailing `+` to enable that level and above. For example `trace,debug,warning+` means enable trace, debug, warning, error and critical. The value ânoneâ means disable logging for the module. The value `default` means use the value from the `DEFAULT` module. -* *_timestamp_* (boolean) : Include timestamp in log messages. -* *_source_* (boolean) : Include source file and line number in log messages. -* *_output_* (string) : Where to send log messages. Can be `stderr`, `syslog` or a file name. - -[[router_configuration_file_address]] -==== address - -Entity type for address configuration. This is used to configure the treatment of message-routed deliveries within a particular address-space. The configuration controls distribution and address phasing. - -* *_prefix_* (string, required) : The address prefix for the configured settings. -* *_distribution_* (One of [`multicast`, `closest`, `balanced`], default=`balanced`) : Treatment of traffic associated with the address. -* *_waypoint_* (boolean) : Designates this address space as being used for waypoints. This will cause the proper address-phasing to be used. -* *_ingressPhase_* (integer) : Advanced - Override the ingress phase for this address. -* *_egressPhase_* (integer) : Advanced - Override the egress phase for this address. - -[[router_configuration_file_linkroute]] -==== linkRoute - -Entity type for link-route configuration. This is used to identify remote containers that shall be destinations for routed link-attaches. The link-routing configuration applies to an addressing space defined by a prefix. - -* *_prefix_* (string, required) : The address prefix for the configured settings. -* *_containerId_* (string) : it specifies that the link route will be activated if a remote container will provide a container-id matching with this value. -* *_connection_* (string) : The name from a connector or listener. -* *_distribution_* (One of [`linkBalanced`], default=`linkBalanced`) : Treatment of traffic associated with the address. -* *_dir_* (One of [`in`, `out`], required) : The permitted direction of links. It is defined from a router point of view so âinâ means client senders (router ingress) and âoutâ means client receivers (router egress). - -[[router_configuration_file_autolink]] -==== autoLink - -Entity type for configuring auto-links. Auto-links are links whose lifecycle is managed by the router. These are typically used to attach to waypoints on remote containers (brokers, and so on.). - -* *_addr_* (string, required) : The address of the provisioned object. -* *_dir_* (One of [`in`, `out`], required) : The direction of the link to be created. In means into the router, out means out of the router. -* *_phase_* (integer) : The address phase for this link. Defaults to `0` for `out` links and `1` for `in` links. -* *_containerId_* (string) : ContainerID for the target container. -* *_connection_* (string) : The name from a connector or listener. - -==== console - -Start a websocket/tcp proxy and http file server to serve the web console. - -* *_listener_* (string) : The name of the listener to send the proxied tcp traffic to. -* *_wsport_* (integer, default=`5673`) : The port on which to listen for websocket traffic. -* *_proxy_* (string) : The full path to the proxy program to run. -* *_home_* (string) : The full path to the html/css/js files for the console. -* *_args_* (string) : Optional args to pass to the proxy program for logging, authentication, and so on. - -==== policy - -Defines global connection limit - -* *_maximumConnections_* (integer) : Global maximum number of concurrent client connections allowed. Zero implies no limit. This limit is always enforced even if no other policy settings have been defined. -* *_enableAccessRules_* (boolean) : Enable user rule set processing and connection denial. -* *_policyFolder_* (path) : The absolute path to a folder that holds policyRuleset definition .json files. For a small system the rulesets may all be defined in this file. At a larger scale it is better to have the policy files in their own folder and to have none of the rulesets defined here. All rulesets in all .json files in this folder are processed. -* *_defaultApplication_* (string) : Application policyRuleset to use for connections with no open.hostname or a hostname that does not match any existing policy. For users that donât wish to use open.hostname or any multi-tennancy feature, this default policy can be the only policy in effect for the network. -* *_defaultApplicationEnabled_* (boolean) : Enable defaultApplication policy fallback logic. - -==== policyRuleset - -Per application definition of the locations from which users may connect and the groups to which users belong. - -* *_maxConnections_* (integer) : Maximum number of concurrent client connections allowed. Zero implies no limit. -* *_maxConnPerUser_* (integer) : Maximum number of concurrent client connections allowed for any single user. Zero implies no limit. -* *_maxConnPerHost_* (integer) : Maximum number of concurrent client connections allowed for any remote host. Zero implies no limit. -* *_userGroups_* (map) : A map where each key is a user group name and the corresponding value is a CSV string naming the users in that group. Users who are assigned to one or more groups are deemed ârestrictedâ. Restricted users are subject to connection ingress policy and are assigned policy settings based on the assigned user groups. Unrestricted users may be allowed or denied. If unrestricted users are allowed to connect then they are assigned to user group default. -* *_ingressHostGroups_* (map) : A map where each key is an ingress host group name and the corresponding value is a CSV string naming the IP addresses or address ranges in that group. IP addresses may be FQDN strings or numeric IPv4 or IPv6 host addresses. A host range is two host addresses of the same address family separated with a hyphen. The wildcard host address â*â represents any host address. -* *_ingressPolicies_* (map) : A map where each key is a user group name and the corresponding value is a CSV string naming the ingress host group names that restrict the ingress host for the user group. Users who are members of the user group are allowed to connect only from a host in one of the named ingress host groups. -* *_connectionAllowDefault_* (boolean) : Unrestricted users, those who are not members of a defined user group, are allowed to connect to this application. Unrestricted users are assigned to the âdefaultâ user group and receive âdefaultâ settings. -* *_settings_* (map) : A map where each key is a user group name and the value is a map of the corresponding settings for that group. http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/configuration-security.adoc ---------------------------------------------------------------------- diff --git a/doc/new-book/configuration-security.adoc b/doc/new-book/configuration-security.adoc deleted file mode 100644 index c59a35f..0000000 --- a/doc/new-book/configuration-security.adoc +++ /dev/null @@ -1,336 +0,0 @@ -//// -Licensed to the Apache Software Foundation (ASF) under one -or more contributor license agreements. See the NOTICE file -distributed with this work for additional information -regarding copyright ownership. The ASF licenses this file -to you under the Apache License, Version 2.0 (the -"License"); you may not use this file except in compliance -with the License. You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - -Unless required by applicable law or agreed to in writing, -software distributed under the License is distributed on an -"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY -KIND, either express or implied. See the License for the -specific language governing permissions and limitations -under the License -//// - -[[security_config]] -= Security - -You can configure {RouterName} to communicate with clients, routers, and brokers in a secure way by authenticating and encrypting the router's connections. {RouterName} supports the following security protocols: - -* _SSL/TLS_ for certificate-based encryption and mutual authentication -* _SASL_ for authentication and payload encryption - -[[setting_up_ssl_for_encryption_and_authentication]] -== Setting Up SSL/TLS for Encryption and Authentication - -Before you can secure incoming and outgoing connections using SSL/TLS encryption and authentication, you must first set up the SSL/TLS profile in the router's configuration file. - -// This section assumes that you only need to set up a single SSL profile. Are there scenarios in which customers might need multiple SSL profiles? Would you typically use a single SSL profile for all incoming and outgoing connections, or would you use separate profiles? - -.Prerequisites - -You must have the following files in PEM format: - -* An X.509 CA certificate (used for signing the router certificate for the SSL/TLS server authentication feature). -* A private key (with or without password protection) for the router. -* An X.509 router certificate signed by the X.509 CA certificate. - -.Procedure - -* In the router's configuration file, add an `sslProfile` section: -+ --- -[options="nowrap",subs="+quotes"] ----- -sslProfile { - name: _NAME_ - certDb: _PATH_.pem - certFile: _PATH_.pem - keyFile: _PATH_.pem - password: _PASSWORD/PATH_TO_PASSWORD_FILE_ - ... -} ----- - -`name`:: A name for the SSL/TLS profile. You can use this name to refer to the profile from the incoming and outgoing connections. -+ -For example: -+ -[options="nowrap"] ----- -name: router-ssl-profile ----- - -`certDb`:: The absolute path to the database that contains the public certificates of trusted certificate authorities (CA). -+ -For example: -+ -[options="nowrap"] ----- -certDb: /qdrouterd/ssl_certs/ca-cert.pem ----- - -`certFile`:: The absolute path to the file containing the PEM-formatted public certificate to be used on the local end of any connections using this profile. -+ -For example: -+ -[options="nowrap"] ----- -certFile: /qdrouterd/ssl_certs/router-cert-pwd.pem ----- - -`keyFile`:: The absolute path to the file containing the PEM-formatted private key for the above certificate. -+ -For example: -+ -[options="nowrap"] ----- -keyFile: /qdrouterd/ssl_certs/router-key-pwd.pem ----- - -`passwordFile` or `password`:: If the private key is password-protected, you must provide the password by either specifying the absolute path to a file containing the password that unlocks the certificate key, or entering the password directly in the configuration file. -+ -For example: -+ -[options="nowrap"] ----- -password: routerKeyPassword ----- - -For information about additional `sslProfile` attributes, see xref:router_configuration_file_sslprofile[_sslProfile_] in the _Configuration Reference_. --- - -[[setting_up_sasl_for_authentication_and_payload_encryption]] -== Setting Up SASL for Authentication and Payload Encryption - -If you plan to use SASL to authenticate connections, you must first add the SASL attributes to the `router` entity in the router's configuration file. These attributes define a set of SASL parameters that can be used by the router's incoming and outgoing connections. - -// Do we need to say something here about only supporting Cyrus SASL? - -.Prerequisites - -Before you can set up SASL, you must have the following: - -* xref:generating_sasl_database[The SASL database is generated.] -* xref:configuring_sasl_database[The SASL configuration file is configured.] - -.Procedure - -* In the router's configuration file, add the following attributes to the `router` section: -+ --- -[options="nowrap",subs="+quotes"] ----- -router { - ... - saslConfigPath: _PATH_ - saslConfigName: _FILE_NAME_ -} ----- - -`saslConfigPath`:: The absolute path to the SASL configuration file. -+ -For example: -+ -[options="nowrap"] ----- -saslConfigPath: /qdrouterd/security ----- - -`saslConfigName`:: The name of the SASL configuration file. This name should _not_ include the `.conf` file extension. -+ -For example: -+ -[options="nowrap"] ----- -saslConfigName: qdrouterd_sasl ----- --- - -[[securing_incoming_connections]] -== Securing Incoming Connections - -You can secure incoming connections by configuring each connection's `listener` entity for encryption, authentication, or both. - -.Prerequisites - -Before securing incoming connections, the security protocols you plan to use should be set up. - -.Choices - -* xref:adding_ssl_encryption_to_incoming_connection[Add SSL/TLS encryption] -* xref:adding_sasl_authentication_to_incoming_connection[Add SASL authentication] -* xref:adding_ssl_client_authentication_to_incoming_connection[Add SSL/TLS client authentication] -* xref:adding_sasl_payload_encryption_to_incoming_connection[Add SASL payload encryption] - -[[adding_ssl_encryption_to_incoming_connection]] -=== Adding SSL/TLS Encryption to an Incoming Connection - -You can configure an incoming connection to accept encrypted connections only. By adding SSL/TLS encryption, to connect to this router, a remote peer must first start an SSL/TLS handshake with the router and be able to validate the server certificate received by the router during the handshake. - -.Procedure - -* In the router's configuration file, add the following attributes to the connection's `listener` entity: -+ --- -[options="nowrap",subs="+quotes"] ----- -listener { - ... - sslProfile: _SSL_PROFILE_NAME_ - requireSsl: yes -} ----- - -`sslProfile`:: The name of the SSL/TLS profile you set up. - -`requireSsl`:: Enter `yes` to require all clients connecting to the router on this connection to use encryption. --- - -[[adding_sasl_authentication_to_incoming_connection]] -=== Adding SASL Authentication to an Incoming Connection - -You can configure an incoming connection to authenticate the client using SASL. You can use SASL authentication with or without SSL/TLS encryption. - -.Procedure - -* In the router's configuration file, add the following attributes to the connection's `listener` section: -+ --- -[options="nowrap",subs="+quotes"] ----- -listener { - ... - authenticatePeer: yes - saslMechanisms: _MECHANISMS_ -} ----- - -`authenticatePeer`:: Set this attribute to `yes` to require the router to authenticate the identity of a remote peer before it can use this incoming connection. - -`saslMechanisms`:: The SASL authentication mechanism (or mechanisms) to use for peer authentication. You can choose any of the Cyrus SASL authentication mechanisms _except_ for `ANONYMOUS`. To specify multiple authentication mechanisms, separate each mechanism with a space. -+ -For a full list of supported Cyrus SASL authentication mechanisms, see link:https://www.cyrusimap.org/sasl/sasl/authentication_mechanisms.html[Authentication Mechanisms^]. --- - -[[adding_ssl_client_authentication_to_incoming_connection]] -=== Adding SSL/TLS Client Authentication to an Incoming Connection - -You can configure an incoming connection to authenticate the client using SSL/TLS. - -The base SSL/TLS configuration provides content encryption and server authentication, which means that remote peers can verify the router's identity, but the router cannot verify a peer's identity. - -However, you can require an incoming connection to use SSL/TLS client authentication, which means that remote peers must provide an additional certificate to the router during the SSL/TLS handshake. By using this certificate, the router can verify the client's identity without using a username and password. - -You can use SSL/TLS client authentication with or without SASL authentication. - -.Procedure - -* In the router's configuration, file, add the following attribute to the connection's `listener` entity: -+ --- -[options="nowrap"] ----- -listener { - ... - authenticatePeer: yes -} ----- - -`authenticatePeer`:: Set this attribute to `yes` to require the router to authenticate the identity of a remote peer before it can use this incoming connection. --- - -[[adding_sasl_payload_encryption_to_incoming_connection]] -=== Adding SASL Payload Encryption to an Incoming Connection - -If you do not use SSL/TLS, you can still encrypt the incoming connection by using SASL payload encryption. - -.Procedure - -* In the router's configuration file, add the following attributes to the connection's `listener` section: -+ --- -[options="nowrap",subs="+quotes"] ----- -listener { - ... - requireEncryption: yes - saslMechanisms: _MECHANISMS_ -} ----- - -`requireEncryption`:: Set this attribute to `yes` to require the router to use SASL payload encryption for the connection. - -`saslMechanisms`:: The SASL mechanism to use. You can choose any of the Cyrus SASL authentication mechanisms. To specify multiple authentication mechanisms, separate each mechanism with a space. -+ -For a full list of supported Cyrus SASL authentication mechanisms, see link:https://www.cyrusimap.org/sasl/sasl/authentication_mechanisms.html[Authentication Mechanisms^]. --- - -[[securing_outgoing_connections]] -== Securing Outgoing Connections - -You can secure outgoing connections by configuring each connection's `connector` entity for encryption, authentication, or both. - -.Prerequisites - -Before securing outgoing connections, the security protocols you plan to use should be set up. - -.Choices - -* xref:adding_ssl_authentication_to_outgoing_connection[Add SSL/TLS authentication] -* xref:adding_sasl_authentication_to_outgoing_connection[Add SASL authentication] - -[[adding_ssl_authentication_to_outgoing_connection]] -=== Adding SSL/TLS Client Authentication to an Outgoing Connection - -If an outgoing connection connects to an external client configured with mutual authentication, you should ensure that the outgoing connection is configured to provide the external client with a valid security certificate during the SSL/TLS handshake. - -You can use SSL/TLS client authentication with or without SASL authentication. - -.Procedure - -* In the router's configuration file, add the `sslProfile` attribute to the connection's `connector` entity: -+ --- -[options="nowrap",subs="+quotes"] ----- -connector { - ... - sslProfile: _SSL_PROFILE_NAME_ -} ----- - -`sslProfile`:: The name of the SSL/TLS profile you set up. --- - -[[adding_sasl_authentication_to_outgoing_connection]] -=== Adding SASL Authentication to an Outgoing Connection - -You can configure an outgoing connection to provide authentication credentials to the external container. You can use SASL authentication with or without SSL/TLS encryption. - -.Procedure - -* In the router's configuration file, add the `saslMechanisms` attribute to the connection's `connector` entity: -+ --- -[options="nowrap",subs="+quotes"] ----- -connector { - ... - saslMechanisms: _MECHANISMS_ - saslUsername: _USERNAME_ - saslPassword: _PASSWORD_ -} ----- - -`saslMechanisms`:: One or more SASL mechanisms to use to authenticate the router to the external container. You can choose any of the Cyrus SASL authentication mechanisms. To specify multiple authentication mechanisms, separate each mechanism with a space. -+ -For a full list of supported Cyrus SASL authentication mechanisms, see link:https://www.cyrusimap.org/sasl/sasl/authentication_mechanisms.html[Authentication Mechanisms^]. -`saslUsername`:: If any of the SASL mechanisms uses username/password authentication, then provide the username to connect to the external container. -`saslPassword`:: If any of the SASL mechanisms uses username/password authentication, then provide the password to connect to the external container. --- http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/cyrus-sasl.adoc ---------------------------------------------------------------------- diff --git a/doc/new-book/cyrus-sasl.adoc b/doc/new-book/cyrus-sasl.adoc deleted file mode 100644 index 6d510d6..0000000 --- a/doc/new-book/cyrus-sasl.adoc +++ /dev/null @@ -1,90 +0,0 @@ -//// -Licensed to the Apache Software Foundation (ASF) under one -or more contributor license agreements. See the NOTICE file -distributed with this work for additional information -regarding copyright ownership. The ASF licenses this file -to you under the Apache License, Version 2.0 (the -"License"); you may not use this file except in compliance -with the License. You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - -Unless required by applicable law or agreed to in writing, -software distributed under the License is distributed on an -"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY -KIND, either express or implied. See the License for the -specific language governing permissions and limitations -under the License -//// - -[[cyrus_sasl]] -= Using Cyrus SASL to Provide Authentication - -// Just doing some basic editing for now; for future releases, this content will need some more work. Also need to determine if it should be moved from an appendix to the section that deals with setting up SASL. - -{RouterName} uses the Cyrus SASL library for SASL authentication. Therefore, if you want to use SASL, you must set up the Cyrus SASL database and configure it. - -[[generating_sasl_database]] -== Generating a SASL Database - -To generate a SASL database to store credentials, enter the following command: - -[options="nowrap",subs="+quotes"] ----- -# saslpasswd2 -c -f _SASL_DATABASE_NAME_.sasldb -u _DOMAIN_NAME_ _USER_NAME_ ----- - -This command creates or updates the specified SASL database, and adds the specified user name to it. The command also prompts you for the user name's password. - -// What is the goal here - to add user credentials to the database? If so, do you need to run this command for every user that you want to add? When it says that the command prompts for the password, does that mean you use the prompt to set the user's password? - -The full user name is the user name you entered plus the domain name (`__USER_NAME__`@`__DOMAIN_NAME__`). Providing a domain name is not required when you add a user to the database, but if you do not provide one, a default domain will be added automatically (the hostname of the machine on which the tool is running). For example, in the command above, the full user name would be `[email protected]`. - -== Viewing Users in a SASL Database - -To view the user names stored in the SASL database: - -[options="nowrap",subs="+quotes"] ----- -# sasldblistusers2 -f qdrouterd.sasldb [email protected]: __PASSWORD__ [email protected]: __PASSWORD__ ----- - -[[configuring_sasl_database]] -== Configuring a SASL Database - -To use the SASL database to provide authentication in {RouterName}: - -. Open the `/etc/sasl2/qdrouterd.conf` configuration file. - -. Set the following attributes: -+ --- -[options="nowrap",subs="+quotes"] ----- -pwcheck_method: auxprop -auxprop_plugin: sasldb -sasldb_path: __SASL_DATABASE_NAME__ -mech_list: __MECHANISM1 ...__ ----- - -`sasldb_path`:: The name of the SASL database to use. -+ -For example: -+ -[options="nowrap"] ----- -sasldb_path: qdrouterd.sasldb ----- - -`mech_list`:: The SASL mechanisms to enable for authentication. To add multiple mechanisms, separate each entry with a space. -+ -For example: -+ -[options="nowrap"] ----- -mech_list: ANONYMOUS DIGEST-MD5 EXTERNAL PLAIN ----- -// Where can users find a list of supported mechanisms? --- http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/getting-started.adoc ---------------------------------------------------------------------- diff --git a/doc/new-book/getting-started.adoc b/doc/new-book/getting-started.adoc deleted file mode 100644 index 6c899d2..0000000 --- a/doc/new-book/getting-started.adoc +++ /dev/null @@ -1,156 +0,0 @@ -//// -Licensed to the Apache Software Foundation (ASF) under one -or more contributor license agreements. See the NOTICE file -distributed with this work for additional information -regarding copyright ownership. The ASF licenses this file -to you under the Apache License, Version 2.0 (the -"License"); you may not use this file except in compliance -with the License. You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - -Unless required by applicable law or agreed to in writing, -software distributed under the License is distributed on an -"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY -KIND, either express or implied. See the License for the -specific language governing permissions and limitations -under the License -//// - -[[getting_started]] -= Getting Started - -Before configuring {RouterName}, you should understand how to start the router, how it is configured by default, and how to use it in a simple peer-to-peer configuration. - -[[starting_the_router]] -== Starting the Router - -.Procedure - -// Step 1 for starting the router. -include::{FragmentDir}/fragment-starting-router-step.adoc[] -+ -[NOTE] -==== -You can specify a different configuration file with which to start the router. For more information, see xref:methods_for_changing_router_configuration[_Changing a Router's Configuration_]. -==== -+ -The router starts, using the default configuration file stored at `/etc/qpid-dispatch/qdrouterd.conf`. - -. View the log to verify the router status: -+ -[options="nowrap"] ----- -$ qdstat --log ----- -+ -This example shows that the router was correctly installed, is running, and is ready to route traffic between clients: -+ -[options="nowrap"] ----- -$ qdstat --log -Fri May 20 09:38:03 2017 SERVER (info) Container Name: Router.A // <1> -Fri May 20 09:38:03 2017 ROUTER (info) Router started in Standalone mode // <2> -Fri May 20 09:38:03 2017 ROUTER_CORE (info) Router Core thread running. 0/Router.A -Fri May 20 09:38:03 2017 ROUTER_CORE (info) In-process subscription M/$management -Fri May 20 09:38:03 2017 AGENT (info) Activating management agent on $_management_internal // <3> -Fri May 20 09:38:03 2017 ROUTER_CORE (info) In-process subscription L/$management -Fri May 20 09:38:03 2017 ROUTER_CORE (info) In-process subscription L/$_management_internal -Fri May 20 09:38:03 2017 DISPLAYNAME (info) Activating DisplayNameService on $displayname -Fri May 20 09:38:03 2017 ROUTER_CORE (info) In-process subscription L/$displayname -Fri May 20 09:38:03 2017 CONN_MGR (info) Configured Listener: 0.0.0.0:amqp proto=any role=normal // <4> -Fri May 20 09:38:03 2017 POLICY (info) Policy configured maximumConnections: 0, policyFolder: '', access rules enabled: 'false' -Fri May 20 09:38:03 2017 POLICY (info) Policy fallback defaultApplication is disabled -Fri May 20 09:38:03 2017 SERVER (info) Operational, 4 Threads Running // <5> ----- -<1> The name of this router instance. -<2> By default, the router starts in _standalone_ mode, which means that it cannot connect to other routers or be used in a router network. -<3> The management agent. It provides the `$management` address, through which management tools such as `qdmanage` and `qdstat` can perform create, read, update, and delete (CRUD) operations on the router. As an AMQP endpoint, the management agent supports all operations defined by the link:https://www.oasis-open.org/committees/download.php/54441/AMQP%20Management%20v1.0%20WD09[AMQP management specification (Draft 9)]. -<4> A listener is started on all available network interfaces and listens for connections on the standard AMQP port (5672, which is not encrypted). -<5> Threads for handling message traffic and all other internal operations. - -== Routing Messages in a Peer-to-Peer Configuration - -// XXX Calling this peer-to-peer poses some problems. It's also -// technically client-server in this instance, and most people think -// those two things are exclusive. - -This example demonstrates how the router can connect clients by receiving and sending messages between them. It uses the router's default configuration file and does not require a broker. - -.Peer-to-peer Communication -image::01-peer-to-peer.png[Peer-to-peer Communication, align="center"] - -As the diagram indicates, the configuration consists of an {RouterName} component with two clients connected to it: a sender and a receiver. The receiver wants to receive messages on a specific address, and the sender sends -messages to that address. - -A broker is not used in this example, so there is no _"store and forward"_ mechanism in the middle. Instead, the messages flow from sender to receiver only if the receiver is online, and the sender can confirm that the messages have arrived at their destination. - -This example uses a {ClientAmqpPythonName} client to start a receiver client, and then send five messages from the sender client. - -.Prerequisites - -{ClientAmqpPythonName} must be installed before you can complete the peer-to-peer routing example. For more information, see {ClientAmqpPythonUrl}. - -.Procedure - -. xref:starting_the_receiver_client[Start the receiver client]. -. xref:sending_messages[Send messages]. - -[[starting_the_receiver_client]] -=== Starting the Receiver Client - -In this example, the receiver client is started first. This means that the messages will be sent as soon as the sender client is started. - -[NOTE] -==== -In practice, the order in which you start senders and receivers does not matter. In both cases, messages will be sent as soon as the receiver comes online. -==== - -.Procedure - -* To start the receiver by using the Python receiver client, navigate to the Python examples directory and run the `simple_recv.py` example: -+ --- -[options="nowrap",subs="+quotes"] ----- -$ cd __INSTALL_DIR__/examples/python/ -$ python simple_recv.py -a 127.0.0.1:5672/examples -m 5 ----- - -This command starts the receiver and listens on the default address (`127.0.0.1:5672/examples`). The receiver is also set to receive a maximum of five messages. --- - -[[sending_messages]] -=== Sending Messages - -After starting the receiver client, you can send messages from the sender. These messages will travel through the router to the receiver. - -.Procedure - -* In a new terminal window, navigate to the Python examples directory and run the `simple_send.py` example: -+ --- -[options="nowrap",subs="+quotes"] ----- -$ cd __INSTALL_DIR__/examples/python/ -$ python simple_send.py -a 127.0.0.1:5672/examples -m 5 ----- - -This command sends five auto-generated messages to the default address (`127.0.0.1:5672/examples`) and then confirms that they were delivered and acknowledged by the receiver: - -[options="nowrap"] ----- -all messages confirmed ----- - -The receiver client receives the messages and displays their content: - -[options="nowrap"] ----- -{u'sequence': 1L} -{u'sequence': 2L} -{u'sequence': 3L} -{u'sequence': 4L} -{u'sequence': 5L} ----- --- http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/images/01-peer-to-peer.png ---------------------------------------------------------------------- diff --git a/doc/new-book/images/01-peer-to-peer.png b/doc/new-book/images/01-peer-to-peer.png deleted file mode 100644 index 5c834aa..0000000 Binary files a/doc/new-book/images/01-peer-to-peer.png and /dev/null differ http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/images/balanced-routing.png ---------------------------------------------------------------------- diff --git a/doc/new-book/images/balanced-routing.png b/doc/new-book/images/balanced-routing.png deleted file mode 100644 index fedcdbf..0000000 Binary files a/doc/new-book/images/balanced-routing.png and /dev/null differ http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/images/brokered-messaging.png ---------------------------------------------------------------------- diff --git a/doc/new-book/images/brokered-messaging.png b/doc/new-book/images/brokered-messaging.png deleted file mode 100644 index ae129d4..0000000 Binary files a/doc/new-book/images/brokered-messaging.png and /dev/null differ http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/images/closest-routing.png ---------------------------------------------------------------------- diff --git a/doc/new-book/images/closest-routing.png b/doc/new-book/images/closest-routing.png deleted file mode 100644 index ba3f0a5..0000000 Binary files a/doc/new-book/images/closest-routing.png and /dev/null differ http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/images/console1.png ---------------------------------------------------------------------- diff --git a/doc/new-book/images/console1.png b/doc/new-book/images/console1.png deleted file mode 100644 index f131884..0000000 Binary files a/doc/new-book/images/console1.png and /dev/null differ http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/images/console_charts.png ---------------------------------------------------------------------- diff --git a/doc/new-book/images/console_charts.png b/doc/new-book/images/console_charts.png deleted file mode 100644 index 169c2ca..0000000 Binary files a/doc/new-book/images/console_charts.png and /dev/null differ http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/images/console_entity.png ---------------------------------------------------------------------- diff --git a/doc/new-book/images/console_entity.png b/doc/new-book/images/console_entity.png deleted file mode 100644 index 130c7e7..0000000 Binary files a/doc/new-book/images/console_entity.png and /dev/null differ http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/images/console_login.png ---------------------------------------------------------------------- diff --git a/doc/new-book/images/console_login.png b/doc/new-book/images/console_login.png deleted file mode 100644 index 63e22c6..0000000 Binary files a/doc/new-book/images/console_login.png and /dev/null differ http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/images/console_overview.png ---------------------------------------------------------------------- diff --git a/doc/new-book/images/console_overview.png b/doc/new-book/images/console_overview.png deleted file mode 100644 index af25f36..0000000 Binary files a/doc/new-book/images/console_overview.png and /dev/null differ http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/images/console_schema.png ---------------------------------------------------------------------- diff --git a/doc/new-book/images/console_schema.png b/doc/new-book/images/console_schema.png deleted file mode 100644 index ba56c7b..0000000 Binary files a/doc/new-book/images/console_schema.png and /dev/null differ http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/images/console_topology.png ---------------------------------------------------------------------- diff --git a/doc/new-book/images/console_topology.png b/doc/new-book/images/console_topology.png deleted file mode 100644 index ae4b22a..0000000 Binary files a/doc/new-book/images/console_topology.png and /dev/null differ http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/images/link-routing.png ---------------------------------------------------------------------- diff --git a/doc/new-book/images/link-routing.png b/doc/new-book/images/link-routing.png deleted file mode 100644 index 0c1b9e4..0000000 Binary files a/doc/new-book/images/link-routing.png and /dev/null differ http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/images/message-routing.png ---------------------------------------------------------------------- diff --git a/doc/new-book/images/message-routing.png b/doc/new-book/images/message-routing.png deleted file mode 100644 index 42f4638..0000000 Binary files a/doc/new-book/images/message-routing.png and /dev/null differ http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/images/multicast-routing.png ---------------------------------------------------------------------- diff --git a/doc/new-book/images/multicast-routing.png b/doc/new-book/images/multicast-routing.png deleted file mode 100644 index d4548a6..0000000 Binary files a/doc/new-book/images/multicast-routing.png and /dev/null differ http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/images/path-redundancy-01.png ---------------------------------------------------------------------- diff --git a/doc/new-book/images/path-redundancy-01.png b/doc/new-book/images/path-redundancy-01.png deleted file mode 100644 index ba8f10d..0000000 Binary files a/doc/new-book/images/path-redundancy-01.png and /dev/null differ http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/images/path-redundancy-02.png ---------------------------------------------------------------------- diff --git a/doc/new-book/images/path-redundancy-02.png b/doc/new-book/images/path-redundancy-02.png deleted file mode 100644 index 6d4a1f5..0000000 Binary files a/doc/new-book/images/path-redundancy-02.png and /dev/null differ http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/images/path-redundancy-temp-decoupling-01.png ---------------------------------------------------------------------- diff --git a/doc/new-book/images/path-redundancy-temp-decoupling-01.png b/doc/new-book/images/path-redundancy-temp-decoupling-01.png deleted file mode 100644 index c3c6631..0000000 Binary files a/doc/new-book/images/path-redundancy-temp-decoupling-01.png and /dev/null differ http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/images/path-redundancy-temp-decoupling-02.png ---------------------------------------------------------------------- diff --git a/doc/new-book/images/path-redundancy-temp-decoupling-02.png b/doc/new-book/images/path-redundancy-temp-decoupling-02.png deleted file mode 100644 index ecab8b1..0000000 Binary files a/doc/new-book/images/path-redundancy-temp-decoupling-02.png and /dev/null differ http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/images/sharded-queue-01.png ---------------------------------------------------------------------- diff --git a/doc/new-book/images/sharded-queue-01.png b/doc/new-book/images/sharded-queue-01.png deleted file mode 100644 index ab25be0..0000000 Binary files a/doc/new-book/images/sharded-queue-01.png and /dev/null differ http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/images/sharded-queue-02.png ---------------------------------------------------------------------- diff --git a/doc/new-book/images/sharded-queue-02.png b/doc/new-book/images/sharded-queue-02.png deleted file mode 100644 index 7e73e6d..0000000 Binary files a/doc/new-book/images/sharded-queue-02.png and /dev/null differ http://git-wip-us.apache.org/repos/asf/qpid-dispatch/blob/acf82fb5/doc/new-book/introduction.adoc ---------------------------------------------------------------------- diff --git a/doc/new-book/introduction.adoc b/doc/new-book/introduction.adoc deleted file mode 100644 index 2f2655b..0000000 --- a/doc/new-book/introduction.adoc +++ /dev/null @@ -1,124 +0,0 @@ -//// -Licensed to the Apache Software Foundation (ASF) under one -or more contributor license agreements. See the NOTICE file -distributed with this work for additional information -regarding copyright ownership. The ASF licenses this file -to you under the Apache License, Version 2.0 (the -"License"); you may not use this file except in compliance -with the License. You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - -Unless required by applicable law or agreed to in writing, -software distributed under the License is distributed on an -"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY -KIND, either express or implied. See the License for the -specific language governing permissions and limitations -under the License -//// - -[[introduction]] -= Introduction - -[[overview]] -== Overview - -The {RouterName} is an AMQP message router that provides -advanced interconnect capabilities. It allows flexible routing of -messages between any AMQP-enabled endpoints, whether they be clients, -servers, brokers or any other entity that can send or receive standard -AMQP messages. - -A messaging client can make a single AMQP connection into a messaging -bus built of {RouterName} routers and, over that connection, exchange -messages with one or more message brokers, and at the same time exchange -messages directly with other endpoints without involving a broker at -all. - -The router is an intermediary for messages but it is _not_ a broker. It -does not _take responsibility for_ messages. It will, however, propagate -settlement and disposition across a network such that delivery -guarantees are met. In other words: the router network will deliver the -message, possibly via several intermediate routers, _and_ it will route -the acknowledgement of that message by the ultimate receiver back across -the same path. This means that _responsibility_ for the message is -transfered from the original sender to the ultimate receiver __as if -they were directly connected__. However this is done via a flexible -network that allows highly configurable routing of the message -transparent to both sender and receiver. - -There are some patterns where this enables "brokerless messaging" -approaches that are preferable to brokered approaches. In other cases a -broker is essential (in particular where you need the separation of -responsibility and/or the buffering provided by store-and-forward) but a -dispatch network can still be useful to tie brokers and clients together -into patterns that are difficult with a single broker. - -For a "brokerless" example, consider the common brokered implementation -of the request-response pattern, a client puts a request on a queue and -then waits for a reply on another queue. In this case the broker can be -a hindrance - the client may want to know immediately if there is nobody -to serve the request, but typically it can only wait for a timeout to -discover this. With a {RouterName} network, the client can be informed -immediately if its message cannot be delivered because nobody is -listening. When the client receives acknowledgement of the request it -knows not just that it is sitting on a queue, but that it has actually -been received by the server. - -For an exampe of using {RouterName} to enhance the use of brokers, consider -using an array of brokers to implement a scalable distributed work -queue. A dispatch network can make this appear as a single queue, with -senders publishing to a single address and receivers subscribing to a -single address. The dispatch network can distribute work to any broker -in the array and collect work from any broker for any receiver. Brokers -can be shut down or added without affecting clients. This elegantly -solves the common difficulty of "stuck messages" when implementing this -pattern with brokers alone. If a receiver is connected to a broker that -has no messages, but there are messages on another broker, you have to -somehow transfer them or leave them "stuck". With a {RouterName} network, -_all_ the receivers are connected to _all_ the brokers. If there is a -message anywhere it can be delivered to any receiver. - -{RouterName} is meant to be deployed in topologies of multiple routers, -preferably with redundant paths. It uses link-state routing protocols -and algorithms (similar to OSPF or IS-IS from the networking world) to -calculate the best path from every point to every other point and to -recover quickly from failures. It does not need to use clustering for -high availability; rather, it relies on redundant paths to provide -continued connectivity in the face of system or network failure. Because -it never takes responsibility for messages it is effectively stateless. -Messages not delivered to their final destination will not be -acknowledged to the sender and therefore the sender can re-send such -messages if it is disconnected from the network. - -[[benefits]] -== Benefits - -Simplifies connectivity - -* An endpoint can do all of its messaging through a single transport -connection -* Avoid opening holes in firewalls for incoming connections - -Provides messaging connectivity where there is no TCP/IP connectivity - -* A server or broker can be in a private IP network (behind a NAT -firewall) and be accessible by messaging endpoints in other networks -(learn more). - -Simplifies reliability - -* Reliability and availability are provided using redundant topology, -not server clustering -* Reliable end-to-end messaging without persistent stores -* Use a message broker only when you need store-and-forward semantics - -[[features]] -== Features - -* Can be deployed stand-alone or in a network of routers -** Supports arbitrary network topology - no restrictions on redundancy -+ -- Automatic route computation - adjusts quickly to changes in topology -* Provides remote access to brokers or other AMQP servers -* Security --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
