http://git-wip-us.apache.org/repos/asf/incubator-singa/blob/ab9fd550/config/ltmain.sh ---------------------------------------------------------------------- diff --git a/config/ltmain.sh b/config/ltmain.sh new file mode 100644 index 0000000..0223495 --- /dev/null +++ b/config/ltmain.sh @@ -0,0 +1,6911 @@ +# ltmain.sh - Provide generalized library-building support services. +# NOTE: Changing this file will not affect anything until you rerun configure. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# Originally by Gordon Matzigkeit <[email protected]>, 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +basename="s,^.*/,,g" + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" + +# The name of this program: +progname=`echo "$progpath" | $SED $basename` +modename="$progname" + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 + +PROGRAM=ltmain.sh +PACKAGE=libtool +VERSION=1.5.22 +TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)" + +# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac +fi + +# Check that we have a working $echo. +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell, and then maybe $echo will work. + exec $SHELL "$progpath" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat <<EOF +$* +EOF + exit $EXIT_SUCCESS +fi + +default_mode= +help="Try \`$progname --help' for more information." +magic="%%%MAGIC variable%%%" +mkdir="mkdir" +mv="mv -f" +rm="rm -f" + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed="${SED}"' -e 1s/^X//' +sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g' +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + SP2NL='tr \040 \012' + NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + SP2NL='tr \100 \n' + NL2SP='tr \r\n \100\100' + ;; +esac + +# NLS nuisances. +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). +# We save the old values to restore during execute mode. +for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +do + eval "if test \"\${$lt_var+set}\" = set; then + save_$lt_var=\$$lt_var + $lt_var=C + export $lt_var + fi" +done + +# Make sure IFS has a sensible default +lt_nl=' +' +IFS=" $lt_nl" + +if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + $echo "$modename: not configured to build any kind of library" 1>&2 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit $EXIT_FAILURE +fi + +# Global variables. +mode=$default_mode +nonopt= +prev= +prevopt= +run= +show="$echo" +show_help= +execute_dlfiles= +duplicate_deps=no +preserve_args= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" +extracted_archives= +extracted_serial=0 + +##################################### +# Shell function definitions: +# This seems to be the best place for them + +# func_mktempdir [string] +# Make a temporary directory that won't clash with other running +# libtool processes, and avoids race conditions if possible. If +# given, STRING is the basename for that directory. +func_mktempdir () +{ + my_template="${TMPDIR-/tmp}/${1-$progname}" + + if test "$run" = ":"; then + # Return a directory name, but don't create it in dry-run mode + my_tmpdir="${my_template}-$$" + else + + # If mktemp works, use that first and foremost + my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + + if test ! -d "$my_tmpdir"; then + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" + + save_mktempdir_umask=`umask` + umask 0077 + $mkdir "$my_tmpdir" + umask $save_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$my_tmpdir" || { + $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2 + exit $EXIT_FAILURE + } + fi + + $echo "X$my_tmpdir" | $Xsed +} + + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +func_win32_libid () +{ + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ + $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then + win32_nmres=`eval $NM -f posix -A $1 | \ + $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $echo $win32_libid_type +} + + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () +{ + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + CC_quoted="$CC_quoted $arg" + done + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + CC_quoted="$CC_quoted $arg" + done + case "$@ " in + " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + $echo "$modename: unable to infer tagged configuration" + $echo "$modename: specify a tag with \`--tag'" 1>&2 + exit $EXIT_FAILURE +# else +# $echo "$modename: using $tagname tagged configuration" + fi + ;; + esac + fi +} + + +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" + + $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" + $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 + exit $EXIT_FAILURE + fi +} + +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" + my_status="" + + $show "${rm}r $my_gentop" + $run ${rm}r "$my_gentop" + $show "$mkdir $my_gentop" + $run $mkdir "$my_gentop" + my_status=$? + if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then + exit $my_status + fi + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + extracted_serial=`expr $extracted_serial + 1` + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir="$my_gentop/$my_xlib_u" + + $show "${rm}r $my_xdir" + $run ${rm}r "$my_xdir" + $show "$mkdir $my_xdir" + $run $mkdir "$my_xdir" + exit_status=$? + if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then + exit $exit_status + fi + case $host in + *-darwin*) + $show "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + if test -z "$run"; then + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` + darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` + if test -n "$darwin_arches"; then + darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + $show "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we have a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` + lipo -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + ${rm}r unfat-$$ + cd "$darwin_orig_dir" + else + cd "$darwin_orig_dir" + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + fi # $run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + done + func_extract_archives_result="$my_oldobjs" +} +# End of Shell function definitions +##################################### + +# Darwin sucks +eval std_shrext=\"$shrext_cmds\" + +disable_libs=no + +# Parse our command line options once, thoroughly. +while test "$#" -gt 0 +do + arg="$1" + shift + + case $arg in + -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; + *) optarg= ;; + esac + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + execute_dlfiles) + execute_dlfiles="$execute_dlfiles $arg" + ;; + tag) + tagname="$arg" + preserve_args="${preserve_args}=$arg" + + # Check whether tagname contains only valid characters + case $tagname in + *[!-_A-Za-z0-9,/]*) + $echo "$progname: invalid tag name: $tagname" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + case $tagname in + CC) + # Don't test for the "default" C tag, as we know, it's there, but + # not specially marked. + ;; + *) + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then + taglist="$taglist $tagname" + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" + else + $echo "$progname: ignoring unknown tag $tagname" 1>&2 + fi + ;; + esac + ;; + *) + eval "$prev=\$arg" + ;; + esac + + prev= + prevopt= + continue + fi + + # Have we seen a non-optional argument yet? + case $arg in + --help) + show_help=yes + ;; + + --version) + $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" + $echo + $echo "Copyright (C) 2005 Free Software Foundation, Inc." + $echo "This is free software; see the source for copying conditions. There is NO" + $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + exit $? + ;; + + --config) + ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath + # Now print the configurations for the tags. + for tagname in $taglist; do + ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" + done + exit $? + ;; + + --debug) + $echo "$progname: enabling shell trace mode" + set -x + preserve_args="$preserve_args $arg" + ;; + + --dry-run | -n) + run=: + ;; + + --features) + $echo "host: $host" + if test "$build_libtool_libs" = yes; then + $echo "enable shared libraries" + else + $echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + $echo "enable static libraries" + else + $echo "disable static libraries" + fi + exit $? + ;; + + --finish) mode="finish" ;; + + --mode) prevopt="--mode" prev=mode ;; + --mode=*) mode="$optarg" ;; + + --preserve-dup-deps) duplicate_deps="yes" ;; + + --quiet | --silent) + show=: + preserve_args="$preserve_args $arg" + ;; + + --tag) + prevopt="--tag" + prev=tag + preserve_args="$preserve_args --tag" + ;; + --tag=*) + set tag "$optarg" ${1+"$@"} + shift + prev=tag + preserve_args="$preserve_args --tag" + ;; + + -dlopen) + prevopt="-dlopen" + prev=execute_dlfiles + ;; + + -*) + $echo "$modename: unrecognized option \`$arg'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; + + *) + nonopt="$arg" + break + ;; + esac +done + +if test -n "$prevopt"; then + $echo "$modename: option \`$prevopt' requires an argument" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE +fi + +case $disable_libs in +no) + ;; +shared) + build_libtool_libs=no + build_old_libs=yes + ;; +static) + build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` + ;; +esac + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + +if test -z "$show_help"; then + + # Infer the operation mode. + if test -z "$mode"; then + $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 + $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 + case $nonopt in + *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) + mode=link + for arg + do + case $arg in + -c) + mode=compile + break + ;; + esac + done + ;; + *db | *dbx | *strace | *truss) + mode=execute + ;; + *install*|cp|mv) + mode=install + ;; + *rm) + mode=uninstall + ;; + *) + # If we have no mode, but dlfiles were specified, then do execute mode. + test -n "$execute_dlfiles" && mode=execute + + # Just use the default operation mode. + if test -z "$mode"; then + if test -n "$nonopt"; then + $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 + else + $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 + fi + fi + ;; + esac + fi + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$execute_dlfiles" && test "$mode" != execute; then + $echo "$modename: unrecognized option \`-dlopen'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$modename --help --mode=$mode' for more information." + + # These modes are in order of execution frequency so that they run quickly. + case $mode in + # libtool compile mode + compile) + modename="$modename: compile" + # Get the compilation command and the source file. + base_compile= + srcfile="$nonopt" # always keep a non-empty value in "srcfile" + suppress_opt=yes + suppress_output= + arg_mode=normal + libobj= + later= + + for arg + do + case $arg_mode in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg="$arg" + arg_mode=normal + ;; + + target ) + libobj="$arg" + arg_mode=normal + continue + ;; + + normal ) + # Accept any command-line options. + case $arg in + -o) + if test -n "$libobj" ; then + $echo "$modename: you cannot specify \`-o' more than once" 1>&2 + exit $EXIT_FAILURE + fi + arg_mode=target + continue + ;; + + -static | -prefer-pic | -prefer-non-pic) + later="$later $arg" + continue + ;; + + -no-suppress) + suppress_opt=no + continue + ;; + + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + lastarg="$lastarg $arg" + done + IFS="$save_ifs" + lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` + + # Add the arguments to base_compile. + base_compile="$base_compile $lastarg" + continue + ;; + + * ) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg="$srcfile" + srcfile="$arg" + ;; + esac # case $arg + ;; + esac # case $arg_mode + + # Aesthetically quote the previous argument. + lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` + + case $lastarg in + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, and some SunOS ksh mistreat backslash-escaping + # in scan sets (worked around with variable expansion), + # and furthermore cannot handle '|' '&' '(' ')' in scan sets + # at all, so we specify them separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + lastarg="\"$lastarg\"" + ;; + esac + + base_compile="$base_compile $lastarg" + done # for arg + + case $arg_mode in + arg) + $echo "$modename: you must specify an argument for -Xcompile" + exit $EXIT_FAILURE + ;; + target) + $echo "$modename: you must specify a target with \`-o'" 1>&2 + exit $EXIT_FAILURE + ;; + *) + # Get the name of the library object. + [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + xform='[cCFSifmso]' + case $libobj in + *.ada) xform=ada ;; + *.adb) xform=adb ;; + *.ads) xform=ads ;; + *.asm) xform=asm ;; + *.c++) xform=c++ ;; + *.cc) xform=cc ;; + *.ii) xform=ii ;; + *.class) xform=class ;; + *.cpp) xform=cpp ;; + *.cxx) xform=cxx ;; + *.f90) xform=f90 ;; + *.for) xform=for ;; + *.java) xform=java ;; + *.obj) xform=obj ;; + esac + + libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` + + case $libobj in + *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; + *) + $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + func_infer_tag $base_compile + + for arg in $later; do + case $arg in + -static) + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + esac + done + + qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` + case $qlibobj in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qlibobj="\"$qlibobj\"" ;; + esac + test "X$libobj" != "X$qlibobj" \ + && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." + objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$obj"; then + xdir= + else + xdir=$xdir/ + fi + lobj=${xdir}$objdir/$objname + + if test -z "$base_compile"; then + $echo "$modename: you must specify a compilation command" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $lobj $libobj ${libobj}T" + else + removelist="$lobj $libobj ${libobj}T" + fi + + $run $rm $removelist + trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2*) + pic_mode=default + ;; + esac + if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + removelist="$removelist $output_obj $lockfile" + trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + else + output_obj= + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until $run ln "$progpath" "$lockfile" 2>/dev/null; do + $show "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + $echo "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit $EXIT_FAILURE + fi + $echo "$srcfile" > "$lockfile" + fi + + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi + qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` + case $qsrcfile in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qsrcfile="\"$qsrcfile\"" ;; + esac + + $run $rm "$libobj" "${libobj}T" + + # Create a libtool object file (analogous to a ".la" file), + # but don't create it if we're doing a dry run. + test -z "$run" && cat > ${libobj}T <<EOF +# $libobj - a libtool object file +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# Name of the PIC object. +EOF + + # Only build a PIC object if we are building libtool libraries. + if test "$build_libtool_libs" = yes; then + # Without this assignment, base_compile gets emptied. + fbsd_hideous_sh_bug=$base_compile + + if test "$pic_mode" != no; then + command="$base_compile $qsrcfile $pic_flag" + else + # Don't build PIC code + command="$base_compile $qsrcfile" + fi + + if test ! -d "${xdir}$objdir"; then + $show "$mkdir ${xdir}$objdir" + $run $mkdir ${xdir}$objdir + exit_status=$? + if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then + exit $exit_status + fi + fi + + if test -z "$output_obj"; then + # Place PIC objects in $objdir + command="$command -o $lobj" + fi + + $run $rm "$lobj" "$output_obj" + + $show "$command" + if $run eval "$command"; then : + else + test -n "$output_obj" && $run $rm $removelist + exit $EXIT_FAILURE + fi + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $echo "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + $show "$mv $output_obj $lobj" + if $run $mv $output_obj $lobj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # Append the name of the PIC object to the libtool object file. + test -z "$run" && cat >> ${libobj}T <<EOF +pic_object='$objdir/$objname' + +EOF + + # Allow error messages only from the first compilation. + if test "$suppress_opt" = yes; then + suppress_output=' >/dev/null 2>&1' + fi + else + # No PIC object so indicate it doesn't exist in the libtool + # object file. + test -z "$run" && cat >> ${libobj}T <<EOF +pic_object=none + +EOF + fi + + # Only build a position-dependent object if we build old libraries. + if test "$build_old_libs" = yes; then + if test "$pic_mode" != yes; then + # Don't build PIC code + command="$base_compile $qsrcfile" + else + command="$base_compile $qsrcfile $pic_flag" + fi + if test "$compiler_c_o" = yes; then + command="$command -o $obj" + fi + + # Suppress compiler output if we already did a PIC compilation. + command="$command$suppress_output" + $run $rm "$obj" "$output_obj" + $show "$command" + if $run eval "$command"; then : + else + $run $rm $removelist + exit $EXIT_FAILURE + fi + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $echo "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + $show "$mv $output_obj $obj" + if $run $mv $output_obj $obj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # Append the name of the non-PIC object the libtool object file. + # Only append if the libtool object file exists. + test -z "$run" && cat >> ${libobj}T <<EOF +# Name of the non-PIC object. +non_pic_object='$objname' + +EOF + else + # Append the name of the non-PIC object the libtool object file. + # Only append if the libtool object file exists. + test -z "$run" && cat >> ${libobj}T <<EOF +# Name of the non-PIC object. +non_pic_object=none + +EOF + fi + + $run $mv "${libobj}T" "${libobj}" + + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + $run $rm "$lockfile" + fi + + exit $EXIT_SUCCESS + ;; + + # libtool link mode + link | relink) + modename="$modename: link" + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + # It is impossible to link a dll without this setting, and + # we shouldn't force the makefile maintainer to figure out + # which system we are compiling for in order to pass an extra + # flag for every libtool invocation. + # allow_undefined=no + + # FIXME: Unfortunately, there are problems with the above when trying + # to make a dll which has undefined symbols, in which case not + # even a static library is built. For now, we need to specify + # -no-undefined on the libtool link line when we can be certain + # that all symbols are satisfied, otherwise we get a static library. + allow_undefined=yes + ;; + *) + allow_undefined=yes + ;; + esac + libtool_args="$nonopt" + base_compile="$nonopt $@" + compile_command="$nonopt" + finalize_command="$nonopt" + + compile_rpath= + finalize_rpath= + compile_shlibpath= + finalize_shlibpath= + convenience= + old_convenience= + deplibs= + old_deplibs= + compiler_flags= + linker_flags= + dllsearchpath= + lib_search_path=`pwd` + inst_prefix_dir= + + avoid_version=no + dlfiles= + dlprefiles= + dlself=no + export_dynamic=no + export_symbols= + export_symbols_regex= + generated= + libobjs= + ltlibs= + module=no + no_install=no + objs= + non_pic_objects= + notinst_path= # paths that contain not-installed libtool libraries + precious_files_regex= + prefer_static_libs=no + preload=no + prev= + prevarg= + release= + rpath= + xrpath= + perm_rpath= + temp_rpath= + thread_safe=no + vinfo= + vinfo_number=no + + func_infer_tag $base_compile + + # We need to know -static, to get the right output filenames. + for arg + do + case $arg in + -all-static | -static | -static-libtool-libs) + case $arg in + -all-static) + if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + -static) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=built + ;; + -static-libtool-libs) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + esac + build_libtool_libs=no + build_old_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg="$1" + shift + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test + ;; + *) qarg=$arg ;; + esac + libtool_args="$libtool_args $qarg" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + compile_command="$compile_command @OUTPUT@" + finalize_command="$finalize_command @OUTPUT@" + ;; + esac + + case $prev in + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + compile_command="$compile_command @SYMFILE@" + finalize_command="$finalize_command @SYMFILE@" + preload=yes + fi + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test "$prev" = dlfiles; then + dlfiles="$dlfiles $arg" + else + dlprefiles="$dlprefiles $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols="$arg" + if test ! -f "$arg"; then + $echo "$modename: symbol file \`$arg' does not exist" + exit $EXIT_FAILURE + fi + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + inst_prefix) + inst_prefix_dir="$arg" + prev= + continue + ;; + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat $save_arg` + do +# moreargs="$moreargs $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + pic_object= + non_pic_object= + + # Read the .lo file + # If there is no directory component, then add one. + case $arg in + */* | *\\*) . $arg ;; + *) . ./$arg ;; + esac + + if test -z "$pic_object" || \ + test -z "$non_pic_object" || + test "$pic_object" = none && \ + test "$non_pic_object" = none; then + $echo "$modename: cannot find name of object for \`$arg'" 1>&2 + exit $EXIT_FAILURE + fi + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + libobjs="$libobjs $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + non_pic_objects="$non_pic_objects $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if test -z "$run"; then + $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 + exit $EXIT_FAILURE + else + # Dry-run case. + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` + non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` + libobjs="$libobjs $pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + fi + done + else + $echo "$modename: link input file \`$save_arg' does not exist" + exit $EXIT_FAILURE + fi + arg=$save_arg + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 + exit $EXIT_FAILURE + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) rpath="$rpath $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) xrpath="$xrpath $arg" ;; + esac + fi + prev= + continue + ;; + xcompiler) + compiler_flags="$compiler_flags $qarg" + prev= + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" + continue + ;; + xlinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $wl$qarg" + prev= + compile_command="$compile_command $wl$qarg" + finalize_command="$finalize_command $wl$qarg" + continue + ;; + xcclinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $qarg" + prev= + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" + continue + ;; + shrext) + shrext_cmds="$arg" + prev= + continue + ;; + darwin_framework|darwin_framework_skip) + test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + prev= + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" + + prevarg="$arg" + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + compile_command="$compile_command $link_static_flag" + finalize_command="$finalize_command $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 + continue + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: more than one -exported-symbols argument is not allowed" + exit $EXIT_FAILURE + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -framework|-arch|-isysroot) + case " $CC " in + *" ${arg} ${1} "* | *" ${arg} ${1} "*) + prev=darwin_framework_skip ;; + *) compiler_flags="$compiler_flags $arg" + prev=darwin_framework ;; + esac + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + ;; + esac + continue + ;; + + -L*) + dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 + absdir="$dir" + notinst_path="$notinst_path $dir" + fi + dir="$absdir" + ;; + esac + case "$deplibs " in + *" -L$dir "*) ;; + *) + deplibs="$deplibs -L$dir" + lib_search_path="$lib_search_path $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$dir:"*) ;; + *) dllsearchpath="$dllsearchpath:$dir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + *) dllsearchpath="$dllsearchpath:$testbindir";; + esac + ;; + esac + continue + ;; + + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + deplibs="$deplibs -framework System" + continue + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + test "X$arg" = "X-lc" && continue + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + test "X$arg" = "X-lc" && continue + ;; + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + deplibs="$deplibs $arg" + continue + ;; + + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + -model) + compile_command="$compile_command $arg" + compiler_flags="$compiler_flags $arg" + finalize_command="$finalize_command $arg" + prev=xcompiler + continue + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) + compiler_flags="$compiler_flags $arg" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + continue + ;; + + -module) + module=yes + continue + ;; + + # -64, -mips[0-9] enable 64-bit mode on the SGI compiler + # -r[0-9][0-9]* specifies the processor on the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler + # +DA*, +DD* enable 64-bit mode on the HP compiler + # -q* pass through compiler args for the IBM compiler + # -m* pass through architecture-specific compiler args for GCC + # -m*, -t[45]*, -txscale* pass through architecture-specific + # compiler args for GCC + # -pg pass through profiling flag for GCC + # @file GCC response files + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \ + -t[45]*|-txscale*|@*) + + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + compiler_flags="$compiler_flags $arg" + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + # The PATH hackery in wrapper scripts is required on Windows + # in order for the loader to find any dlls it needs. + $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 + $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -objectlist) + prev=objectlist + continue + ;; + + -o) prev=output ;; + + -precious-files-regex) + prev=precious_regex + continue + ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 + exit $EXIT_FAILURE + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + continue + ;; + + -static | -static-libtool-libs) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Wl,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $wl$flag" + linker_flags="$linker_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + -XCClinker) + prev=xcclinker + continue + ;; + + # Some other compiler flag. + -* | +*) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + ;; + + *.$objext) + # A standard object. + objs="$objs $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + pic_object= + non_pic_object= + + # Read the .lo file + # If there is no directory component, then add one. + case $arg in + */* | *\\*) . $arg ;; + *) . ./$arg ;; + esac + + if test -z "$pic_object" || \ + test -z "$non_pic_object" || + test "$pic_object" = none && \ + test "$non_pic_object" = none; then + $echo "$modename: cannot find name of object for \`$arg'" 1>&2 + exit $EXIT_FAILURE + fi + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + libobjs="$libobjs $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + non_pic_objects="$non_pic_objects $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if test -z "$run"; then + $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 + exit $EXIT_FAILURE + else + # Dry-run case. + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` + non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` + libobjs="$libobjs $pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + fi + ;; + + *.$libext) + # An archive. + deplibs="$deplibs $arg" + old_deplibs="$old_deplibs $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + dlfiles="$dlfiles $arg" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + dlprefiles="$dlprefiles $arg" + prev= + else + deplibs="$deplibs $arg" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + done # argument parsing loop + + if test -n "$prev"; then + $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` + if test "X$output_objdir" = "X$output"; then + output_objdir="$objdir" + else + output_objdir="$output_objdir/$objdir" + fi + # Create the object directory. + if test ! -d "$output_objdir"; then + $show "$mkdir $output_objdir" + $run $mkdir $output_objdir + exit_status=$? + if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then + exit $exit_status + fi + fi + + # Determine the type of output + case $output in + "") + $echo "$modename: you must specify an output file" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + case $host in + *cygwin* | *mingw* | *pw32*) + # don't eliminate duplications in $postdeps and $predeps + duplicate_compiler_generated_deps=yes + ;; + *) + duplicate_compiler_generated_deps=$duplicate_deps + ;; + esac + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if test "X$duplicate_deps" = "Xyes" ; then + case "$libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + libs="$libs $deplib" + done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; + esac + pre_post_deps="$pre_post_deps $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + case $linkmode in + lib) + passes="conv link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 + exit $EXIT_FAILURE + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + for pass in $passes; do + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + esac + fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi + for deplib in $libs; do + lib= + found=no + case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + compiler_flags="$compiler_flags $deplib" + fi + continue + ;; + -l*) + if test "$linkmode" != lib && test "$linkmode" != prog; then + $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 + continue + fi + name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` + for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if (${SED} -e '2q' $lib | + grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + library_names= + old_library= + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + fi + ;; # -l + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + ;; + prog) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + ;; + *) + $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test "$pass" = link; then + dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) lib="$deplib" ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method + match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + if eval $echo \"$deplib\" 2>/dev/null \ + | $SED 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=yes + fi + ;; + pass_all) + valid_a_lib=yes + ;; + esac + if test "$valid_a_lib" != yes; then + $echo + $echo "*** Warning: Trying to link with static lib archive $deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because the file extensions .$libext of this argument makes me believe" + $echo "*** that it is just a static archive that I should not used here." + else + $echo + $echo "*** Warning: Linking the shared library $output against the" + $echo "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + continue + ;; + prog) + if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + newdlprefiles="$newdlprefiles $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + newdlfiles="$newdlfiles $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + if test "$found" = yes || test -f "$lib"; then : + else + $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2 + exit $EXIT_FAILURE + fi + + # Check to see that this really is a libtool archive. + if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + avoidtemprpath= + + + # Read the .la file + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && dlfiles="$dlfiles $dlopen" + test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" + fi + + if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + # It is a libtool convenience library, so add in its objects. + convenience="$convenience $ladir/$objdir/$old_library" + old_convenience="$old_convenience $ladir/$objdir/$old_library" + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + elif test "$linkmode" != prog && test "$linkmode" != lib; then + $echo "$modename: \`$lib' is not a convenience library" 1>&2 + exit $EXIT_FAILURE + fi + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + for l in $old_library $library_names; do + linklib="$l" + done + if test -z "$linklib"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + if test -z "$dlname" || + test "$dlopen_support" != yes || + test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + dlprefiles="$dlprefiles $lib $dependency_libs" + else + newdlfiles="$newdlfiles $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 + $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 + abs_ladir="$ladir" + fi + ;; + esac + laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + $echo "$modename: warning: library \`$lib' was moved." 1>&2 + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$libdir" + absdir="$libdir" + fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir="$ladir" + absdir="$abs_ladir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + fi + fi # $installed = yes + name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + + # This library was specified with -dlpreopen. + if test "$pass" = dlpreopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + newdlprefiles="$newdlprefiles $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + newdlprefiles="$newdlprefiles $dir/$dlname" + else + newdlprefiles="$newdlprefiles $dir/$linklib" + fi + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test "$linkmode" = prog && test "$pass" != link; then + newlib_search_path="$newlib_search_path $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test + esac + # Need to link against all dependency_libs? + if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { { test "$prefer_static_libs" = no || + test "$prefer_static_libs,$installed" = "built,yes"; } || + test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath " in + *" $dir "*) ;; + *" $absdir "*) ;; + *) temp_rpath="$temp_rpath $absdir" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + use_static_libs=$prefer_static_libs + if test "$use_static_libs" = built && test "$installed" = yes ; then + use_static_libs=no + fi + if test -n "$library_names" && + { test "$use_static_libs" = no || test -z "$old_library"; }; then + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes + fi + # This is a shared library + + # Warn about portability, can't link against -module's on + # some systems (darwin) + if test "$shouldnotlink" = yes && test "$pass" = link ; then + $echo + if test "$linkmode" = prog; then + $echo "*** Warning: Linking the executable $output against the loadable module" + else + $echo "*** Warning: Linking the shared library $output against the loadable module" + fi + $echo "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + realname="$2" + shift; shift + libname=`eval \\$echo \"$libname_spec\"` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin* | mingw*) + major=`expr $current - $age` + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + soname=`$echo $soroot | ${SED} -e 's/^.*\///'` + newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + $show "extracting exported symbol list from \`$soname'" + save_ifs="$IFS"; IFS='~' + cmds=$extract_expsyms_cmds + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + $show "generating import library for \`$soname'" + save_ifs="$IFS"; IFS='~' + cmds=$old_archive_from_expsyms_cmds + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test "$linkmode" = prog || test "$mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + case $host in + *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; + *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ + *-*-unixware7*) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a module then we can not link against + # it, someone is ignoring the new warnings I added + if /usr/bin/file -L $add 2> /dev/null | + $EGREP ": [^:]* bundle" >/dev/null ; then + $echo "** Warning, lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + $echo + $echo "** And there doesn't seem to be a static archive available" + $echo "** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + fi + esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$dir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + $echo "$modename: configuration error: unsupported hardcode properties" + exit $EXIT_FAILURE + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && \ + test "$hardcode_minus_L" != yes && \ + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + fi + fi + fi + + if test "$linkmode" = prog || test "$mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + fi + + if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test "$linkmode" = prog; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + $echo + $echo "*** Warning: This system can not link to static lib archive $lib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + $echo "*** But as you try to build a module library, libtool will still create " + $echo "*** a static module, that should work as long as the dlopening application" + $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + $echo + $echo "*** However, this would only work if libtool was able to extract symbol" + $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + $echo "*** not find such a program. So, this module is probably useless." + $echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test "$linkmode" = lib; then + if test -n "$dependency_libs" && + { test "$hardcode_into_libs" != yes || + test "$build_old_libs" = yes || + test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) xrpath="$xrpath $temp_xrpath";; + esac;; + *) temp_deplibs="$temp_deplibs $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + + newlib_search_path="$newlib_search_path $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + + if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + case $deplib in + -L*) path="$deplib" ;; + *.la) + dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$deplib" && dir="." + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 + absdir="$dir" + fi + ;; + esac + if grep "^installed=no" $deplib > /dev/null; then + path="$absdir/$objdir" + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + if test "$absdir" != "$libdir"; then + $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 + fi + path="$absdir" + fi + depdepl= + case $host in + *-*-darwin*) + # we do not want to link against static libs, + # but need to link against shared + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$path/$depdepl" ; then + depdepl="$path/$depdepl" + fi + # do not add paths which are already there + case " $newlib_search_path " in + *" $path "*) ;; + *) newlib_search_path="$newlib_search_path $path";; + esac + fi + path="" + ;; + *) + path="-L$path" + ;; + esac + ;; + -l*) + case $host in + *-*-darwin*) + # Again, we only want to link against shared libraries + eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` + for tmp in $newlib_search_path ; do + if test -f "$tmp/lib$tmp_libs.dylib" ; then + eval depdepl="$tmp/lib$tmp_libs.dylib" + break + fi + done + path="" + ;; + *) continue ;; + esac + ;; + *) continue ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$path $deplibs" ;; + esac + case " $deplibs " in + *" $depdepl "*) ;; + *) deplibs="$depdepl $deplibs" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test "$pass" != dlopen; then + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) lib_search_path="$lib_search_path $dir" ;; + esac + done + newlib_search_path= + fi + + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + tmp_libs="$tmp_libs $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 + fi + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 + fi + + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 + fi + + if test -n "$xrpath"; then + $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 + fi + + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 + fi + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + objs="$objs$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form `libNAME.la'. + case $outputname in + lib*)
<TRUNCATED>
