Added: dev/solr/solr-operator/solr-operator-v0.6.0-RC1-rev9b8d3f028bf793e904593e5548e2c564bc8cf73d/crds/solrclouds.yaml ============================================================================== --- dev/solr/solr-operator/solr-operator-v0.6.0-RC1-rev9b8d3f028bf793e904593e5548e2c564bc8cf73d/crds/solrclouds.yaml (added) +++ dev/solr/solr-operator/solr-operator-v0.6.0-RC1-rev9b8d3f028bf793e904593e5548e2c564bc8cf73d/crds/solrclouds.yaml Fri Aug 5 17:00:12 2022 @@ -0,0 +1,6213 @@ +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed with +# this work for additional information regarding copyright ownership. +# The ASF licenses this file to You under the Apache License, Version 2.0 +# (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +--- +apiVersion: apiextensions.k8s.io/v1 +kind: CustomResourceDefinition +metadata: + annotations: + operator.solr.apache.org/version: v0.6.0 + argocd.argoproj.io/sync-options: Replace=true + controller-gen.kubebuilder.io/version: v0.5.0 + creationTimestamp: null + name: solrclouds.solr.apache.org +spec: + group: solr.apache.org + names: + kind: SolrCloud + listKind: SolrCloudList + plural: solrclouds + shortNames: + - solr + singular: solrcloud + scope: Namespaced + versions: + - additionalPrinterColumns: + - description: Solr Version of the cloud + jsonPath: .status.version + name: Version + type: string + - description: Target Solr Version of the cloud + jsonPath: .status.targetVersion + name: TargetVersion + type: string + - description: Number of solr nodes configured to run in the cloud + jsonPath: .spec.replicas + name: DesiredNodes + type: integer + - description: Number of solr nodes running + jsonPath: .status.replicas + name: Nodes + type: integer + - description: Number of solr nodes connected to the cloud + jsonPath: .status.readyReplicas + name: ReadyNodes + type: integer + - description: Number of solr nodes running the latest SolrCloud pod spec + jsonPath: .status.upToDateNodes + name: UpToDateNodes + type: integer + - jsonPath: .metadata.creationTimestamp + name: Age + type: date + name: v1beta1 + schema: + openAPIV3Schema: + description: SolrCloud is the Schema for the solrclouds API + properties: + apiVersion: + description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' + type: string + kind: + description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' + type: string + metadata: + type: object + spec: + description: SolrCloudSpec defines the desired state of SolrCloud + properties: + additionalLibs: + description: 'List of paths in the Solr Docker image to load in the classpath. Note: Solr Modules will be auto-loaded if specified in the "solrModules" property. There is no need to specify them here as well.' + items: + type: string + type: array + backupRepositories: + description: Allows specification of multiple different "repositories" for Solr to use when backing up data. + items: + maxProperties: 2 + minProperties: 2 + properties: + gcs: + description: A GCSRepository for Solr to use when backing up and restoring collections. + properties: + baseLocation: + description: An already-created chroot within the bucket to store data in. Defaults to the root path "/" if not specified. + type: string + bucket: + description: The name of the GCS bucket that all backup data will be stored in + type: string + gcsCredentialSecret: + description: The name & key of a Kubernetes secret holding a Google cloud service account key. Must be set unless deployed in GKE and making use of Google's "Workplace Identity" feature. + properties: + key: + description: The key of the secret to select from. Must be a valid secret key. + type: string + name: + description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' + type: string + optional: + description: Specify whether the Secret or its key must be defined + type: boolean + required: + - key + type: object + required: + - bucket + type: object + name: + description: 'A name used to identify this local storage profile. Values should follow RFC-1123. (See here for more details: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#dns-label-names)' + maxLength: 100 + minLength: 1 + pattern: '[a-zA-Z0-9]([-_a-zA-Z0-9]*[a-zA-Z0-9])?' + type: string + s3: + description: An S3Repository for Solr to use when backing up and restoring collections. + properties: + baseLocation: + description: An already-created chroot within the bucket to store data in. Defaults to the root path "/" if not specified. + type: string + bucket: + description: The name of the S3 bucket that all backup data will be stored in + type: string + credentials: + description: "Options for specifying S3Credentials. This is optional in case you want to mount this information yourself. However, if you do not include these credentials, and you do not load them yourself via a mount or EnvVars, you will likely see errors when taking s3 backups. \n If running in EKS, you can create an IAMServiceAccount that uses a role permissioned for this S3 bucket. Then use that serviceAccountName for your SolrCloud, and the credentials should be auto-populated." + properties: + accessKeyIdSecret: + description: The name & key of a Kubernetes secret holding an AWS Access Key ID + properties: + key: + description: The key of the secret to select from. Must be a valid secret key. + type: string + name: + description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' + type: string + optional: + description: Specify whether the Secret or its key must be defined + type: boolean + required: + - key + type: object + credentialsFileSecret: + description: The name & key of a Kubernetes secret holding an AWS credentials file + properties: + key: + description: The key of the secret to select from. Must be a valid secret key. + type: string + name: + description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' + type: string + optional: + description: Specify whether the Secret or its key must be defined + type: boolean + required: + - key + type: object + secretAccessKeySecret: + description: The name & key of a Kubernetes secret holding an AWS Secret Access Key + properties: + key: + description: The key of the secret to select from. Must be a valid secret key. + type: string + name: + description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' + type: string + optional: + description: Specify whether the Secret or its key must be defined + type: boolean + required: + - key + type: object + sessionTokenSecret: + description: The name & key of a Kubernetes secret holding an AWS Session Token + properties: + key: + description: The key of the secret to select from. Must be a valid secret key. + type: string + name: + description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' + type: string + optional: + description: Specify whether the Secret or its key must be defined + type: boolean + required: + - key + type: object + type: object + endpoint: + description: The full endpoint URL to use when connecting with S3 (or a supported S3 compatible interface) + type: string + proxyUrl: + description: The full proxy URL to use when connecting with S3 + type: string + region: + description: The S3 region to store the backup data in + type: string + required: + - bucket + - region + type: object + volume: + description: Allows specification of a "repository" for Solr to use when backing up data "locally". + properties: + directory: + description: Select a custom directory name to mount the backup/restore data in the given volume. If not specified, then the name of the solrcloud will be used by default. + type: string + source: + description: 'This is a volumeSource for a volume that will be mounted to all solrNodes to store backups and load restores. The data within the volume will be namespaced for this instance, so feel free to use the same volume for multiple clouds. Since the volume will be mounted to all solrNodes, it must be able to be written from multiple pods. If a PVC reference is given, the PVC must have `accessModes: - ReadWriteMany`. Other options are to use a NFS volume.' + properties: + awsElasticBlockStore: + description: 'AWSElasticBlockStore represents an AWS Disk resource that is attached to a kubelet''s host machine and then exposed to the pod. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore' + properties: + fsType: + description: 'Filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore TODO: how do we prevent errors in the filesystem from compromising the machine' + type: string + partition: + description: 'The partition in the volume that you want to mount. If omitted, the default is to mount by volume name. Examples: For volume /dev/sda1, you specify the partition as "1". Similarly, the volume partition for /dev/sda is "0" (or you can leave the property empty).' + format: int32 + type: integer + readOnly: + description: 'Specify "true" to force and set the ReadOnly property in VolumeMounts to "true". If omitted, the default is "false". More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore' + type: boolean + volumeID: + description: 'Unique ID of the persistent disk resource in AWS (Amazon EBS volume). More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore' + type: string + required: + - volumeID + type: object + azureDisk: + description: AzureDisk represents an Azure Data Disk mount on the host and bind mount to the pod. + properties: + cachingMode: + description: 'Host Caching mode: None, Read Only, Read Write.' + type: string + diskName: + description: The Name of the data disk in the blob storage + type: string + diskURI: + description: The URI the data disk in the blob storage + type: string + fsType: + description: Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. + type: string + kind: + description: 'Expected values Shared: multiple blob disks per storage account Dedicated: single blob disk per storage account Managed: azure managed data disk (only in managed availability set). defaults to shared' + type: string + readOnly: + description: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. + type: boolean + required: + - diskName + - diskURI + type: object + azureFile: + description: AzureFile represents an Azure File Service mount on the host and bind mount to the pod. + properties: + readOnly: + description: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. + type: boolean + secretName: + description: the name of secret that contains Azure Storage Account Name and Key + type: string + shareName: + description: Share Name + type: string + required: + - secretName + - shareName + type: object + cephfs: + description: CephFS represents a Ceph FS mount on the host that shares a pod's lifetime + properties: + monitors: + description: 'Required: Monitors is a collection of Ceph monitors More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it' + items: + type: string + type: array + path: + description: 'Optional: Used as the mounted root, rather than the full Ceph tree, default is /' + type: string + readOnly: + description: 'Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it' + type: boolean + secretFile: + description: 'Optional: SecretFile is the path to key ring for User, default is /etc/ceph/user.secret More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it' + type: string + secretRef: + description: 'Optional: SecretRef is reference to the authentication secret for User, default is empty. More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it' + properties: + name: + description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' + type: string + type: object + user: + description: 'Optional: User is the rados user name, default is admin More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it' + type: string + required: + - monitors + type: object + cinder: + description: 'Cinder represents a cinder volume attached and mounted on kubelets host machine. More info: https://examples.k8s.io/mysql-cinder-pd/README.md' + properties: + fsType: + description: 'Filesystem type to mount. Must be a filesystem type supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://examples.k8s.io/mysql-cinder-pd/README.md' + type: string + readOnly: + description: 'Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. More info: https://examples.k8s.io/mysql-cinder-pd/README.md' + type: boolean + secretRef: + description: 'Optional: points to a secret object containing parameters used to connect to OpenStack.' + properties: + name: + description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' + type: string + type: object + volumeID: + description: 'volume id used to identify the volume in cinder. More info: https://examples.k8s.io/mysql-cinder-pd/README.md' + type: string + required: + - volumeID + type: object + configMap: + description: ConfigMap represents a configMap that should populate this volume + properties: + defaultMode: + description: 'Optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' + format: int32 + type: integer + items: + description: If unspecified, each key-value pair in the Data field of the referenced ConfigMap will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the ConfigMap, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'. + items: + description: Maps a string key to a path within a volume. + properties: + key: + description: The key to project. + type: string + mode: + description: 'Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' + format: int32 + type: integer + path: + description: The relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'. + type: string + required: + - key + - path + type: object + type: array + name: + description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' + type: string + optional: + description: Specify whether the ConfigMap or its keys must be defined + type: boolean + type: object + csi: + description: CSI (Container Storage Interface) represents ephemeral storage that is handled by certain external CSI drivers (Beta feature). + properties: + driver: + description: Driver is the name of the CSI driver that handles this volume. Consult with your admin for the correct name as registered in the cluster. + type: string + fsType: + description: Filesystem type to mount. Ex. "ext4", "xfs", "ntfs". If not provided, the empty value is passed to the associated CSI driver which will determine the default filesystem to apply. + type: string + nodePublishSecretRef: + description: NodePublishSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI NodePublishVolume and NodeUnpublishVolume calls. This field is optional, and may be empty if no secret is required. If the secret object contains more than one secret, all secret references are passed. + properties: + name: + description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' + type: string + type: object + readOnly: + description: Specifies a read-only configuration for the volume. Defaults to false (read/write). + type: boolean + volumeAttributes: + additionalProperties: + type: string + description: VolumeAttributes stores driver-specific properties that are passed to the CSI driver. Consult your driver's documentation for supported values. + type: object + required: + - driver + type: object + downwardAPI: + description: DownwardAPI represents downward API about the pod that should populate this volume + properties: + defaultMode: + description: 'Optional: mode bits to use on created files by default. Must be a Optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' + format: int32 + type: integer + items: + description: Items is a list of downward API volume file + items: + description: DownwardAPIVolumeFile represents information to create the file containing the pod field + properties: + fieldRef: + description: 'Required: Selects a field of the pod: only annotations, labels, name and namespace are supported.' + properties: + apiVersion: + description: Version of the schema the FieldPath is written in terms of, defaults to "v1". + type: string + fieldPath: + description: Path of the field to select in the specified API version. + type: string + required: + - fieldPath + type: object + mode: + description: 'Optional: mode bits used to set permissions on this file, must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' + format: int32 + type: integer + path: + description: 'Required: Path is the relative path name of the file to be created. Must not be absolute or contain the ''..'' path. Must be utf-8 encoded. The first item of the relative path must not start with ''..''' + type: string + resourceFieldRef: + description: 'Selects a resource of the container: only resources limits and requests (limits.cpu, limits.memory, requests.cpu and requests.memory) are currently supported.' + properties: + containerName: + description: 'Container name: required for volumes, optional for env vars' + type: string + divisor: + anyOf: + - type: integer + - type: string + description: Specifies the output format of the exposed resources, defaults to "1" + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + resource: + description: 'Required: resource to select' + type: string + required: + - resource + type: object + required: + - path + type: object + type: array + type: object + emptyDir: + description: 'EmptyDir represents a temporary directory that shares a pod''s lifetime. More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir' + properties: + medium: + description: 'What type of storage medium should back this directory. The default is "" which means to use the node''s default medium. Must be an empty string (default) or Memory. More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir' + type: string + sizeLimit: + anyOf: + - type: integer + - type: string + description: 'Total amount of local storage required for this EmptyDir volume. The size limit is also applicable for memory medium. The maximum usage on memory medium EmptyDir would be the minimum value between the SizeLimit specified here and the sum of memory limits of all containers in a pod. The default is nil which means that the limit is undefined. More info: http://kubernetes.io/docs/user-guide/volumes#emptydir' + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + type: object + ephemeral: + description: "Ephemeral represents a volume that is handled by a cluster storage driver (Alpha feature). The volume's lifecycle is tied to the pod that defines it - it will be created before the pod starts, and deleted when the pod is removed. \n Use this if: a) the volume is only needed while the pod runs, b) features of normal volumes like restoring from snapshot or capacity tracking are needed, c) the storage driver is specified through a storage class, and d) the storage driver supports dynamic volume provisioning through a PersistentVolumeClaim (see EphemeralVolumeSource for more information on the connection between this volume type and PersistentVolumeClaim). \n Use PersistentVolumeClaim or one of the vendor-specific APIs for volumes that persist for longer than the lifecycle of an individual pod. \n Use CSI for light-weight local ephemeral volumes if the CSI driver is meant to be used that way - see the documentation of the driver fo r more information. \n A pod can use both types of ephemeral volumes and persistent volumes at the same time." + properties: + readOnly: + description: Specifies a read-only configuration for the volume. Defaults to false (read/write). + type: boolean + volumeClaimTemplate: + description: "Will be used to create a stand-alone PVC to provision the volume. The pod in which this EphemeralVolumeSource is embedded will be the owner of the PVC, i.e. the PVC will be deleted together with the pod. The name of the PVC will be `<pod name>-<volume name>` where `<volume name>` is the name from the `PodSpec.Volumes` array entry. Pod validation will reject the pod if the concatenated name is not valid for a PVC (for example, too long). \n An existing PVC with that name that is not owned by the pod will *not* be used for the pod to avoid using an unrelated volume by mistake. Starting the pod is then blocked until the unrelated PVC is removed. If such a pre-created PVC is meant to be used by the pod, the PVC has to updated with an owner reference to the pod once the pod exists. Normally this should not be necessary, but it may be useful when manually reconstructing a broken cluster. \n This field is read-only and no changes will be mad e by Kubernetes to the PVC after it has been created. \n Required, must not be nil." + properties: + metadata: + description: May contain labels and annotations that will be copied into the PVC when creating it. No other fields are allowed and will be rejected during validation. + type: object + spec: + description: The specification for the PersistentVolumeClaim. The entire content is copied unchanged into the PVC that gets created from this template. The same fields as in a PersistentVolumeClaim are also valid here. + properties: + accessModes: + description: 'AccessModes contains the desired access modes the volume should have. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1' + items: + type: string + type: array + dataSource: + description: 'This field can be used to specify either: * An existing VolumeSnapshot object (snapshot.storage.k8s.io/VolumeSnapshot) * An existing PVC (PersistentVolumeClaim) * An existing custom resource that implements data population (Alpha) In order to use custom resource types that implement data population, the AnyVolumeDataSource feature gate must be enabled. If the provisioner or an external controller can support the specified data source, it will create a new volume based on the contents of the specified data source.' + properties: + apiGroup: + description: APIGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required. + type: string + kind: + description: Kind is the type of resource being referenced + type: string + name: + description: Name is the name of resource being referenced + type: string + required: + - kind + - name + type: object + resources: + description: 'Resources represents the minimum resources the volume should have. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources' + properties: + limits: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: 'Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/' + type: object + requests: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: 'Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. More info: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/' + type: object + type: object + selector: + description: A label query over volumes to consider for binding. + properties: + matchExpressions: + description: matchExpressions is a list of label selector requirements. The requirements are ANDed. + items: + description: A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values. + properties: + key: + description: key is the label key that the selector applies to. + type: string + operator: + description: operator represents a key's relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch. + items: + type: string + type: array + required: + - key + - operator + type: object + type: array + matchLabels: + additionalProperties: + type: string + description: matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object + type: object + storageClassName: + description: 'Name of the StorageClass required by the claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1' + type: string + volumeMode: + description: volumeMode defines what type of volume is required by the claim. Value of Filesystem is implied when not included in claim spec. + type: string + volumeName: + description: VolumeName is the binding reference to the PersistentVolume backing this claim. + type: string + type: object + required: + - spec + type: object + type: object + fc: + description: FC represents a Fibre Channel resource that is attached to a kubelet's host machine and then exposed to the pod. + properties: + fsType: + description: 'Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. TODO: how do we prevent errors in the filesystem from compromising the machine' + type: string + lun: + description: 'Optional: FC target lun number' + format: int32 + type: integer + readOnly: + description: 'Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.' + type: boolean + targetWWNs: + description: 'Optional: FC target worldwide names (WWNs)' + items: + type: string + type: array + wwids: + description: 'Optional: FC volume world wide identifiers (wwids) Either wwids or combination of targetWWNs and lun must be set, but not both simultaneously.' + items: + type: string + type: array + type: object + flexVolume: + description: FlexVolume represents a generic volume resource that is provisioned/attached using an exec based plugin. + properties: + driver: + description: Driver is the name of the driver to use for this volume. + type: string + fsType: + description: Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". The default filesystem depends on FlexVolume script. + type: string + options: + additionalProperties: + type: string + description: 'Optional: Extra command options if any.' + type: object + readOnly: + description: 'Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.' + type: boolean + secretRef: + description: 'Optional: SecretRef is reference to the secret object containing sensitive information to pass to the plugin scripts. This may be empty if no secret object is specified. If the secret object contains more than one secret, all secrets are passed to the plugin scripts.' + properties: + name: + description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' + type: string + type: object + required: + - driver + type: object + flocker: + description: Flocker represents a Flocker volume attached to a kubelet's host machine. This depends on the Flocker control service being running + properties: + datasetName: + description: Name of the dataset stored as metadata -> name on the dataset for Flocker should be considered as deprecated + type: string + datasetUUID: + description: UUID of the dataset. This is unique identifier of a Flocker dataset + type: string + type: object + gcePersistentDisk: + description: 'GCEPersistentDisk represents a GCE Disk resource that is attached to a kubelet''s host machine and then exposed to the pod. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk' + properties: + fsType: + description: 'Filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk TODO: how do we prevent errors in the filesystem from compromising the machine' + type: string + partition: + description: 'The partition in the volume that you want to mount. If omitted, the default is to mount by volume name. Examples: For volume /dev/sda1, you specify the partition as "1". Similarly, the volume partition for /dev/sda is "0" (or you can leave the property empty). More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk' + format: int32 + type: integer + pdName: + description: 'Unique name of the PD resource in GCE. Used to identify the disk in GCE. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk' + type: string + readOnly: + description: 'ReadOnly here will force the ReadOnly setting in VolumeMounts. Defaults to false. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk' + type: boolean + required: + - pdName + type: object + gitRepo: + description: 'GitRepo represents a git repository at a particular revision. DEPRECATED: GitRepo is deprecated. To provision a container with a git repo, mount an EmptyDir into an InitContainer that clones the repo using git, then mount the EmptyDir into the Pod''s container.' + properties: + directory: + description: Target directory name. Must not contain or start with '..'. If '.' is supplied, the volume directory will be the git repository. Otherwise, if specified, the volume will contain the git repository in the subdirectory with the given name. + type: string + repository: + description: Repository URL + type: string + revision: + description: Commit hash for the specified revision. + type: string + required: + - repository + type: object + glusterfs: + description: 'Glusterfs represents a Glusterfs mount on the host that shares a pod''s lifetime. More info: https://examples.k8s.io/volumes/glusterfs/README.md' + properties: + endpoints: + description: 'EndpointsName is the endpoint name that details Glusterfs topology. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod' + type: string + path: + description: 'Path is the Glusterfs volume path. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod' + type: string + readOnly: + description: 'ReadOnly here will force the Glusterfs volume to be mounted with read-only permissions. Defaults to false. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod' + type: boolean + required: + - endpoints + - path + type: object + hostPath: + description: 'HostPath represents a pre-existing file or directory on the host machine that is directly exposed to the container. This is generally used for system agents or other privileged things that are allowed to see the host machine. Most containers will NOT need this. More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath --- TODO(jonesdl) We need to restrict who can use host directory mounts and who can/can not mount host directories as read/write.' + properties: + path: + description: 'Path of the directory on the host. If the path is a symlink, it will follow the link to the real path. More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath' + type: string + type: + description: 'Type for HostPath Volume Defaults to "" More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath' + type: string + required: + - path + type: object + iscsi: + description: 'ISCSI represents an ISCSI Disk resource that is attached to a kubelet''s host machine and then exposed to the pod. More info: https://examples.k8s.io/volumes/iscsi/README.md' + properties: + chapAuthDiscovery: + description: whether support iSCSI Discovery CHAP authentication + type: boolean + chapAuthSession: + description: whether support iSCSI Session CHAP authentication + type: boolean + fsType: + description: 'Filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#iscsi TODO: how do we prevent errors in the filesystem from compromising the machine' + type: string + initiatorName: + description: Custom iSCSI Initiator Name. If initiatorName is specified with iscsiInterface simultaneously, new iSCSI interface <target portal>:<volume name> will be created for the connection. + type: string + iqn: + description: Target iSCSI Qualified Name. + type: string + iscsiInterface: + description: iSCSI Interface Name that uses an iSCSI transport. Defaults to 'default' (tcp). + type: string + lun: + description: iSCSI Target Lun number. + format: int32 + type: integer + portals: + description: iSCSI Target Portal List. The portal is either an IP or ip_addr:port if the port is other than default (typically TCP ports 860 and 3260). + items: + type: string + type: array + readOnly: + description: ReadOnly here will force the ReadOnly setting in VolumeMounts. Defaults to false. + type: boolean + secretRef: + description: CHAP Secret for iSCSI target and initiator authentication + properties: + name: + description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' + type: string + type: object + targetPortal: + description: iSCSI Target Portal. The Portal is either an IP or ip_addr:port if the port is other than default (typically TCP ports 860 and 3260). + type: string + required: + - iqn + - lun + - targetPortal + type: object + nfs: + description: 'NFS represents an NFS mount on the host that shares a pod''s lifetime More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs' + properties: + path: + description: 'Path that is exported by the NFS server. More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs' + type: string + readOnly: + description: 'ReadOnly here will force the NFS export to be mounted with read-only permissions. Defaults to false. More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs' + type: boolean + server: + description: 'Server is the hostname or IP address of the NFS server. More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs' + type: string + required: + - path + - server + type: object + persistentVolumeClaim: + description: 'PersistentVolumeClaimVolumeSource represents a reference to a PersistentVolumeClaim in the same namespace. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims' + properties: + claimName: + description: 'ClaimName is the name of a PersistentVolumeClaim in the same namespace as the pod using this volume. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims' + type: string + readOnly: + description: Will force the ReadOnly setting in VolumeMounts. Default false. + type: boolean + required: + - claimName + type: object + photonPersistentDisk: + description: PhotonPersistentDisk represents a PhotonController persistent disk attached and mounted on kubelets host machine + properties: + fsType: + description: Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. + type: string + pdID: + description: ID that identifies Photon Controller persistent disk + type: string + required: + - pdID + type: object + portworxVolume: + description: PortworxVolume represents a portworx volume attached and mounted on kubelets host machine + properties: + fsType: + description: FSType represents the filesystem type to mount Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs". Implicitly inferred to be "ext4" if unspecified. + type: string + readOnly: + description: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. + type: boolean + volumeID: + description: VolumeID uniquely identifies a Portworx volume + type: string + required: + - volumeID + type: object + projected: + description: Items for all in one resources secrets, configmaps, and downward API + properties: + defaultMode: + description: Mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set. + format: int32 + type: integer + sources: + description: list of volume projections + items: + description: Projection that may be projected along with other supported volume types + properties: + configMap: + description: information about the configMap data to project + properties: + items: + description: If unspecified, each key-value pair in the Data field of the referenced ConfigMap will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the ConfigMap, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'. + items: + description: Maps a string key to a path within a volume. + properties: + key: + description: The key to project. + type: string + mode: + description: 'Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' + format: int32 + type: integer + path: + description: The relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'. + type: string + required: + - key + - path + type: object + type: array + name: + description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' + type: string + optional: + description: Specify whether the ConfigMap or its keys must be defined + type: boolean + type: object + downwardAPI: + description: information about the downwardAPI data to project + properties: + items: + description: Items is a list of DownwardAPIVolume file + items: + description: DownwardAPIVolumeFile represents information to create the file containing the pod field + properties: + fieldRef: + description: 'Required: Selects a field of the pod: only annotations, labels, name and namespace are supported.' + properties: + apiVersion: + description: Version of the schema the FieldPath is written in terms of, defaults to "v1". + type: string + fieldPath: + description: Path of the field to select in the specified API version. + type: string + required: + - fieldPath + type: object + mode: + description: 'Optional: mode bits used to set permissions on this file, must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' + format: int32 + type: integer + path: + description: 'Required: Path is the relative path name of the file to be created. Must not be absolute or contain the ''..'' path. Must be utf-8 encoded. The first item of the relative path must not start with ''..''' + type: string + resourceFieldRef: + description: 'Selects a resource of the container: only resources limits and requests (limits.cpu, limits.memory, requests.cpu and requests.memory) are currently supported.' + properties: + containerName: + description: 'Container name: required for volumes, optional for env vars' + type: string + divisor: + anyOf: + - type: integer + - type: string + description: Specifies the output format of the exposed resources, defaults to "1" + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + resource: + description: 'Required: resource to select' + type: string + required: + - resource + type: object + required: + - path + type: object + type: array + type: object + secret: + description: information about the secret data to project + properties: + items: + description: If unspecified, each key-value pair in the Data field of the referenced Secret will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the Secret, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'. + items: + description: Maps a string key to a path within a volume. + properties: + key: + description: The key to project. + type: string + mode: + description: 'Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' + format: int32 + type: integer + path: + description: The relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'. + type: string + required: + - key + - path + type: object + type: array + name: + description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' + type: string + optional: + description: Specify whether the Secret or its key must be defined + type: boolean + type: object + serviceAccountToken: + description: information about the serviceAccountToken data to project + properties: + audience: + description: Audience is the intended audience of the token. A recipient of a token must identify itself with an identifier specified in the audience of the token, and otherwise should reject the token. The audience defaults to the identifier of the apiserver. + type: string + expirationSeconds: + description: ExpirationSeconds is the requested duration of validity of the service account token. As the token approaches expiration, the kubelet volume plugin will proactively rotate the service account token. The kubelet will start trying to rotate the token if the token is older than 80 percent of its time to live or if the token is older than 24 hours.Defaults to 1 hour and must be at least 10 minutes. + format: int64 + type: integer + path: + description: Path is the path relative to the mount point of the file to project the token into. + type: string + required: + - path + type: object + type: object + type: array + type: object + quobyte: + description: Quobyte represents a Quobyte mount on the host that shares a pod's lifetime + properties: + group: + description: Group to map volume access to Default is no group + type: string + readOnly: + description: ReadOnly here will force the Quobyte volume to be mounted with read-only permissions. Defaults to false. + type: boolean + registry: + description: Registry represents a single or multiple Quobyte Registry services specified as a string as host:port pair (multiple entries are separated with commas) which acts as the central registry for volumes + type: string + tenant: + description: Tenant owning the given Quobyte volume in the Backend Used with dynamically provisioned Quobyte volumes, value is set by the plugin + type: string + user: + description: User to map volume access to Defaults to serivceaccount user + type: string + volume: + description: Volume is a string that references an already created Quobyte volume by name. + type: string + required: + - registry + - volume + type: object + rbd: + description: 'RBD represents a Rados Block Device mount on the host that shares a pod''s lifetime. More info: https://examples.k8s.io/volumes/rbd/README.md' + properties: + fsType: + description: 'Filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#rbd TODO: how do we prevent errors in the filesystem from compromising the machine' + type: string + image: + description: 'The rados image name. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it' + type: string + keyring: + description: 'Keyring is the path to key ring for RBDUser. Default is /etc/ceph/keyring. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it' + type: string + monitors: + description: 'A collection of Ceph monitors. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it' + items: + type: string + type: array + pool: + description: 'The rados pool name. Default is rbd. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it' + type: string + readOnly: + description: 'ReadOnly here will force the ReadOnly setting in VolumeMounts. Defaults to false. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it' + type: boolean + secretRef: + description: 'SecretRef is name of the authentication secret for RBDUser. If provided overrides keyring. Default is nil. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it' + properties: + name: + description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' + type: string + type: object + user: + description: 'The rados user name. Default is admin. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it' + type: string + required: + - image + - monitors + type: object + scaleIO: + description: ScaleIO represents a ScaleIO persistent volume attached and mounted on Kubernetes nodes. + properties: + fsType: + description: Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Default is "xfs". + type: string + gateway: + description: The host address of the ScaleIO API Gateway. + type: string + protectionDomain: + description: The name of the ScaleIO Protection Domain for the configured storage. + type: string + readOnly: + description: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. + type: boolean + secretRef: + description: SecretRef references to the secret for ScaleIO user and other sensitive information. If this is not provided, Login operation will fail. + properties: + name: + description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' + type: string + type: object + sslEnabled: + description: Flag to enable/disable SSL communication with Gateway, default false + type: boolean + storageMode: + description: Indicates whether the storage for a volume should be ThickProvisioned or ThinProvisioned. Default is ThinProvisioned. + type: string + storagePool: + description: The ScaleIO Storage Pool associated with the protection domain. + type: string + system: + description: The name of the storage system as configured in ScaleIO. + type: string + volumeName: + description: The name of a volume already created in the ScaleIO system that is associated with this volume source. + type: string + required: + - gateway + - secretRef + - system + type: object + secret: + description: 'Secret represents a secret that should populate this volume. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret' + properties: + defaultMode: + description: 'Optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' + format: int32 + type: integer + items: + description: If unspecified, each key-value pair in the Data field of the referenced Secret will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the Secret, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'. + items: + description: Maps a string key to a path within a volume. + properties: + key: + description: The key to project. + type: string + mode: + description: 'Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.' + format: int32 + type: integer + path: + description: The relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'.
[... 5158 lines stripped ...]
