http://git-wip-us.apache.org/repos/asf/zookeeper/blob/c1efa954/src/docs/src/documentation/content/xdocs/zookeeperProgrammers.xml ---------------------------------------------------------------------- diff --git a/src/docs/src/documentation/content/xdocs/zookeeperProgrammers.xml b/src/docs/src/documentation/content/xdocs/zookeeperProgrammers.xml deleted file mode 100644 index 8fbd679..0000000 --- a/src/docs/src/documentation/content/xdocs/zookeeperProgrammers.xml +++ /dev/null @@ -1,1640 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!-- - Copyright 2002-2004 The Apache Software Foundation - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. ---> -<!DOCTYPE article PUBLIC "-//OASIS//DTD Simplified DocBook XML V1.0//EN" -"http://www.oasis-open.org/docbook/xml/simple/1.0/sdocbook.dtd";> -<article id="bk_programmersGuide"> - <title>ZooKeeper Programmer's Guide</title> - - <subtitle>Developing Distributed Applications that use ZooKeeper</subtitle> - - <articleinfo> - <legalnotice> - <para>Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. You may - obtain a copy of the License at <ulink - url="http://www.apache.org/licenses/LICENSE-2.0";>http://www.apache.org/licenses/LICENSE-2.0</ulink>.</para> - - <para>Unless required by applicable law or agreed to in writing, - software distributed under the License is distributed on an "AS IS" - BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or - implied. See the License for the specific language governing permissions - and limitations under the License.</para> - </legalnotice> - - <abstract> - <para>This guide contains detailed information about creating - distributed applications that use ZooKeeper. It discusses the basic - operations ZooKeeper supports, and how these can be used to build - higher-level abstractions. It contains solutions to common tasks, a - troubleshooting guide, and links to other information.</para> - - <para>$Revision: 1.14 $ $Date: 2008/09/19 05:31:45 $</para> - </abstract> - </articleinfo> - - <section id="_introduction"> - <title>Introduction</title> - - <para>This document is a guide for developers wishing to create - distributed applications that take advantage of ZooKeeper's coordination - services. It contains conceptual and practical information.</para> - - <para>The first four sections of this guide present higher level - discussions of various ZooKeeper concepts. These are necessary both for an - understanding of how ZooKeeper works as well how to work with it. It does - not contain source code, but it does assume a familiarity with the - problems associated with distributed computing. The sections in this first - group are:</para> - - <itemizedlist> - <listitem> - <para><xref linkend="ch_zkDataModel" /></para> - </listitem> - - <listitem> - <para><xref linkend="ch_zkSessions" /></para> - </listitem> - - <listitem> - <para><xref linkend="ch_zkWatches" /></para> - </listitem> - - <listitem> - <para><xref linkend="ch_zkGuarantees" /></para> - </listitem> - </itemizedlist> - - <para>The next four sections provide practical programming - information. These are:</para> - - <itemizedlist> - <listitem> - <para><xref linkend="ch_guideToZkOperations" /></para> - </listitem> - - <listitem> - <para><xref linkend="ch_bindings" /></para> - </listitem> - - <listitem> - <para><xref linkend="ch_programStructureWithExample" /> - <emphasis>[tbd]</emphasis></para> - </listitem> - - <listitem> - <para><xref linkend="ch_gotchas" /></para> - </listitem> - </itemizedlist> - - <para>The book concludes with an <ulink - url="#apx_linksToOtherInfo">appendix</ulink> containing links to other - useful, ZooKeeper-related information.</para> - - <para>Most of information in this document is written to be accessible as - stand-alone reference material. However, before starting your first - ZooKeeper application, you should probably at least read the chaptes on - the <ulink url="#ch_zkDataModel">ZooKeeper Data Model</ulink> and <ulink - url="#ch_guideToZkOperations">ZooKeeper Basic Operations</ulink>. Also, - the <ulink url="#ch_programStructureWithExample">Simple Programmming - Example</ulink> <emphasis>[tbd]</emphasis> is helpful for understanding the basic - structure of a ZooKeeper client application.</para> - </section> - - <section id="ch_zkDataModel"> - <title>The ZooKeeper Data Model</title> - - <para>ZooKeeper has a hierarchal name space, much like a distributed file - system. The only difference is that each node in the namespace can have - data associated with it as well as children. It is like having a file - system that allows a file to also be a directory. Paths to nodes are - always expressed as canonical, absolute, slash-separated paths; there are - no relative reference. Any unicode character can be used in a path subject - to the following constraints:</para> - - <itemizedlist> - <listitem> - <para>The null character (\u0000) cannot be part of a path name. (This - causes problems with the C binding.)</para> - </listitem> - - <listitem> - <para>The following characters can't be used because they don't - display well, or render in confusing ways: \u0001 - \u0019 and \u007F - - \u009F.</para> - </listitem> - - <listitem> - <para>The following characters are not allowed: \ud800 -uF8FFF, - \uFFF0 - uFFFF.</para> - </listitem> - - <listitem> - <para>The "." character can be used as part of another name, but "." - and ".." cannot alone be used to indicate a node along a path, - because ZooKeeper doesn't use relative paths. The following would be - invalid: "/a/b/./c" or "/a/b/../c".</para> - </listitem> - - <listitem> - <para>The token "zookeeper" is reserved.</para> - </listitem> - </itemizedlist> - - <section id="sc_zkDataModel_znodes"> - <title>ZNodes</title> - - <para>Every node in a ZooKeeper tree is referred to as a - <emphasis>znode</emphasis>. Znodes maintain a stat structure that - includes version numbers for data changes, acl changes. The stat - structure also has timestamps. The version number, together with the - timestamp, allows ZooKeeper to validate the cache and to coordinate - updates. Each time a znode's data changes, the version number increases. - For instance, whenever a client retrieves data, it also receives the - version of the data. And when a client performs an update or a delete, - it must supply the version of the data of the znode it is changing. If - the version it supplies doesn't match the actual version of the data, - the update will fail. (This behavior can be overridden. For more - information see... )<emphasis>[tbd...]</emphasis></para> - - <note> - <para>In distributed application engineering, the word - <emphasis>node</emphasis> can refer to a generic host machine, a - server, a member of an ensemble, a client process, etc. In the ZooKeeper - documentation, <emphasis>znodes</emphasis> refer to the data nodes. - <emphasis>Servers</emphasis> refer to machines that make up the - ZooKeeper service; <emphasis>quorum peers</emphasis> refer to the - servers that make up an ensemble; client refers to any host or process - which uses a ZooKeeper service.</para> - </note> - - <para> A znode is the main abstraction a programmer needs to be aware of. Znodes have - several characteristics that are worth mentioning here.</para> - - <section id="sc_zkDataMode_watches"> - <title>Watches</title> - - <para>Clients can set watches on znodes. Changes to that znode trigger - the watch and then clear the watch. When a watch triggers, ZooKeeper - sends the client a notification. More information about watches can be - found in the section - <ulink url="#ch_zkWatches">ZooKeeper Watches</ulink>.</para> - </section> - - <section> - <title>Data Access</title> - - <para>The data stored at each znode in a namespace is read and written - atomically. Reads get all the data bytes associated with a znode and a - write replaces all the data. Each node has an Access Control List - (ACL) that restricts who can do what.</para> - - <para>ZooKeeper was not designed to be a general database or large - object store. Instead, it manages coordination data. This data can - come in the form of configuration, status information, rendezvous, etc. - A common property of the various forms of coordination data is that - they are relatively small: measured in kilobytes. - The ZooKeeper client and the server implementations have sanity checks - to ensure that znodes have less than 1M of data, but the data should - be much less than that on average. Operating on relatively large data - sizes will cause some operations to take much more time than others and - will affect the latencies of some operations because of the extra time - needed to move more data over the network and onto storage media. If - large data storage is needed, the usually pattern of dealing with such - data is to store it on a bulk storage system, such as NFS or HDFS, and - store pointers to the storage locations in ZooKeeper.</para> - </section> - - <section> - <title>Ephemeral Nodes</title> - - <para>ZooKeeper also has the notion of ephemeral nodes. These znodes - exists as long as the session that created the znode is active. When - the session ends the znode is deleted. Because of this behavior - ephemeral znodes are not allowed to have children.</para> - </section> - - <section> - <title>Sequence Nodes -- Unique Naming</title> - - <para>When creating a znode you can also request that - ZooKeeper append a monotonically increasing counter to the end - of path. This counter is unique to the parent znode. The - counter has a format of %010d -- that is 10 digits with 0 - (zero) padding (the counter is formatted in this way to - simplify sorting), i.e. "<path>0000000001". See - <ulink url="recipes.html#sc_recipes_Queues">Queue - Recipe</ulink> for an example use of this feature. Note: the - counter used to store the next sequence number is a signed int - (4bytes) maintained by the parent node, the counter will - overflow when incremented beyond 2147483647 (resulting in a - name "<path>-2147483648").</para> - </section> - </section> - - <section id="sc_timeInZk"> - <title>Time in ZooKeeper</title> - - <para>ZooKeeper tracks time multiple ways:</para> - - <itemizedlist> - <listitem> - <para><emphasis role="bold">Zxid</emphasis></para> - - <para>Every change to the ZooKeeper state receives a stamp in the - form of a <emphasis>zxid</emphasis> (ZooKeeper Transaction Id). - This exposes the total ordering of all changes to ZooKeeper. Each - change will have a unique zxid and if zxid1 is smaller than zxid2 - then zxid1 happened before zxid2.</para> - </listitem> - - <listitem> - <para><emphasis role="bold">Version numbers</emphasis></para> - - <para>Every change to a node will cause an increase to one of the - version numbers of that node. The three version numbers are version - (number of changes to the data of a znode), cversion (number of - changes to the children of a znode), and aversion (number of changes - to the ACL of a znode).</para> - </listitem> - - <listitem> - <para><emphasis role="bold">Ticks</emphasis></para> - - <para>When using multi-server ZooKeeper, servers use ticks to define - timing of events such as status uploads, session timeouts, - connection timeouts between peers, etc. The tick time is only - indirectly exposed through the minimum session timeout (2 times the - tick time); if a client requests a session timeout less than the - minimum session timeout, the server will tell the client that the - session timeout is actually the minimum session timeout.</para> - </listitem> - - <listitem> - <para><emphasis role="bold">Real time</emphasis></para> - - <para>ZooKeeper doesn't use real time, or clock time, at all except - to put timestamps into the stat structure on znode creation and - znode modification.</para> - </listitem> - </itemizedlist> - </section> - - <section id="sc_zkStatStructure"> - <title>ZooKeeper Stat Structure</title> - - <para>The Stat structure for each znode in ZooKeeper is made up of the - following fields:</para> - - <itemizedlist> - <listitem> - <para><emphasis role="bold">czxid</emphasis></para> - - <para>The zxid of the change that caused this znode to be - created.</para> - </listitem> - - <listitem> - <para><emphasis role="bold">mzxid</emphasis></para> - - <para>The zxid of the change that last modified this znode.</para> - </listitem> - - <listitem> - <para><emphasis role="bold">pzxid</emphasis></para> - - <para>The zxid of the change that last modified children of this znode.</para> - </listitem> - - <listitem> - <para><emphasis role="bold">ctime</emphasis></para> - - <para>The time in milliseconds from epoch when this znode was - created.</para> - </listitem> - - <listitem> - <para><emphasis role="bold">mtime</emphasis></para> - - <para>The time in milliseconds from epoch when this znode was last - modified.</para> - </listitem> - - <listitem> - <para><emphasis role="bold">version</emphasis></para> - - <para>The number of changes to the data of this znode.</para> - </listitem> - - <listitem> - <para><emphasis role="bold">cversion</emphasis></para> - - <para>The number of changes to the children of this znode.</para> - </listitem> - - <listitem> - <para><emphasis role="bold">aversion</emphasis></para> - - <para>The number of changes to the ACL of this znode.</para> - </listitem> - - <listitem> - <para><emphasis role="bold">ephemeralOwner</emphasis></para> - - <para>The session id of the owner of this znode if the znode is an - ephemeral node. If it is not an ephemeral node, it will be - zero.</para> - </listitem> - - <listitem> - <para><emphasis role="bold">dataLength</emphasis></para> - - <para>The length of the data field of this znode.</para> - </listitem> - - <listitem> - <para><emphasis role="bold">numChildren</emphasis></para> - - <para>The number of children of this znode.</para> - </listitem> - - </itemizedlist> - </section> - </section> - - <section id="ch_zkSessions"> - <title>ZooKeeper Sessions</title> - - <para>A ZooKeeper client establishes a session with the ZooKeeper - service by creating a handle to the service using a language - binding. Once created, the handle starts of in the CONNECTING state - and the client library tries to connect to one of the servers that - make up the ZooKeeper service at which point it switches to the - CONNECTED state. During normal operation will be in one of these - two states. If an unrecoverable error occurs, such as session - expiration or authentication failure, or if the application explicitly - closes the handle, the handle will move to the CLOSED state. - The following figure shows the possible state transitions of a - ZooKeeper client:</para> - - <mediaobject id="fg_states" > - <imageobject> - <imagedata fileref="images/state_dia.jpg"/> - </imageobject> - </mediaobject> - - <para>To create a client session the application code must provide - a connection string containing a comma separated list of host:port pairs, - each corresponding to a ZooKeeper server (e.g. "127.0.0.1:4545" or - "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002"). The ZooKeeper - client library will pick an arbitrary server and try to connect to - it. If this connection fails, or if the client becomes - disconnected from the server for any reason, the client will - automatically try the next server in the list, until a connection - is (re-)established.</para> - - <para> <emphasis role="bold">Added in 3.2.0</emphasis>: An - optional "chroot" suffix may also be appended to the connection - string. This will run the client commands while interpreting all - paths relative to this root (similar to the unix chroot - command). If used the example would look like: - "127.0.0.1:4545/app/a" or - "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002/app/a" where the - client would be rooted at "/app/a" and all paths would be relative - to this root - ie getting/setting/etc... "/foo/bar" would result - in operations being run on "/app/a/foo/bar" (from the server - perspective). This feature is particularly useful in multi-tenant - environments where each user of a particular ZooKeeper service - could be rooted differently. This makes re-use much simpler as - each user can code his/her application as if it were rooted at - "/", while actual location (say /app/a) could be determined at - deployment time.</para> - - <para>When a client gets a handle to the ZooKeeper service, - ZooKeeper creates a ZooKeeper session, represented as a 64-bit - number, that it assigns to the client. If the client connects to a - different ZooKeeper server, it will send the session id as a part - of the connection handshake. As a security measure, the server - creates a password for the session id that any ZooKeeper server - can validate.The password is sent to the client with the session - id when the client establishes the session. The client sends this - password with the session id whenever it reestablishes the session - with a new server.</para> - - <para>One of the parameters to the ZooKeeper client library call - to create a ZooKeeper session is the session timeout in - milliseconds. The client sends a requested timeout, the server - responds with the timeout that it can give the client. The current - implementation requires that the timeout be a minimum of 2 times - the tickTime (as set in the server configuration) and a maximum of - 20 times the tickTime. The ZooKeeper client API allows access to - the negotiated timeout.</para> - - <para>When a client (session) becomes partitioned from the ZK - serving cluster it will begin searching the list of servers that - were specified during session creation. Eventually, when - connectivity between the client and at least one of the servers is - re-established, the session will either again transition to the - "connected" state (if reconnected within the session timeout - value) or it will transition to the "expired" state (if - reconnected after the session timeout). It is not advisable to - create a new session object (a new ZooKeeper.class or zookeeper - handle in the c binding) for disconnection. The ZK client library - will handle reconnect for you. In particular we have heuristics - built into the client library to handle things like "herd effect", - etc... Only create a new session when you are notified of session - expiration (mandatory).</para> - - <para>Session expiration is managed by the ZooKeeper cluster - itself, not by the client. When the ZK client establishes a - session with the cluster it provides a "timeout" value detailed - above. This value is used by the cluster to determine when the - client's session expires. Expirations happens when the cluster - does not hear from the client within the specified session timeout - period (i.e. no heartbeat). At session expiration the cluster will - delete any/all ephemeral nodes owned by that session and - immediately notify any/all connected clients of the change (anyone - watching those znodes). At this point the client of the expired - session is still disconnected from the cluster, it will not be - notified of the session expiration until/unless it is able to - re-establish a connection to the cluster. The client will stay in - disconnected state until the TCP connection is re-established with - the cluster, at which point the watcher of the expired session - will receive the "session expired" notification.</para> - - <para>Example state transitions for an expired session as seen by - the expired session's watcher:</para> - - <orderedlist> - <listitem><para>'connected' : session is established and client - is communicating with cluster (client/server communication is - operating properly)</para></listitem> - <listitem><para>.... client is partitioned from the - cluster</para></listitem> - <listitem><para>'disconnected' : client has lost connectivity - with the cluster</para></listitem> - <listitem><para>.... time elapses, after 'timeout' period the - cluster expires the session, nothing is seen by client as it is - disconnected from cluster</para></listitem> - <listitem><para>.... time elapses, the client regains network - level connectivity with the cluster</para></listitem> - <listitem><para>'expired' : eventually the client reconnects to - the cluster, it is then notified of the - expiration</para></listitem> - </orderedlist> - - <para>Another parameter to the ZooKeeper session establishment - call is the default watcher. Watchers are notified when any state - change occurs in the client. For example if the client loses - connectivity to the server the client will be notified, or if the - client's session expires, etc... This watcher should consider the - initial state to be disconnected (i.e. before any state changes - events are sent to the watcher by the client lib). In the case of - a new connection, the first event sent to the watcher is typically - the session connection event.</para> - - <para>The session is kept alive by requests sent by the client. If - the session is idle for a period of time that would timeout the - session, the client will send a PING request to keep the session - alive. This PING request not only allows the ZooKeeper server to - know that the client is still active, but it also allows the - client to verify that its connection to the ZooKeeper server is - still active. The timing of the PING is conservative enough to - ensure reasonable time to detect a dead connection and reconnect - to a new server.</para> - - <para> - Once a connection to the server is successfully established - (connected) there are basically two cases where the client lib generates - connectionloss (the result code in c binding, exception in Java -- see - the API documentation for binding specific details) when either a synchronous or - asynchronous operation is performed and one of the following holds: - </para> - - <orderedlist> - <listitem><para>The application calls an operation on a session that is no - longer alive/valid</para></listitem> - <listitem><para>The ZooKeeper client disconnects from a server when there - are pending operations to that server, i.e., there is a pending asynchronous call. - </para></listitem> - </orderedlist> - - <para> <emphasis role="bold">Added in 3.2.0 -- SessionMovedException</emphasis>. There is an internal - exception that is generally not seen by clients called the SessionMovedException. - This exception occurs because a request was received on a connection for a session - which has been reestablished on a different server. The normal cause of this error is - a client that sends a request to a server, but the network packet gets delayed, so - the client times out and connects to a new server. When the delayed packet arrives at - the first server, the old server detects that the session has moved, and closes the - client connection. Clients normally do not see this error since they do not read - from those old connections. (Old connections are usually closed.) One situation in which this - condition can be seen is when two clients try to reestablish the same connection using - a saved session id and password. One of the clients will reestablish the connection - and the second client will be disconnected (causing the pair to attempt to re-establish - its connection/session indefinitely).</para> - - </section> - - <section id="ch_zkWatches"> - <title>ZooKeeper Watches</title> - - <para>All of the read operations in ZooKeeper - <emphasis - role="bold">getData()</emphasis>, <emphasis - role="bold">getChildren()</emphasis>, and <emphasis - role="bold">exists()</emphasis> - have the option of setting a watch as a - side effect. Here is ZooKeeper's definition of a watch: a watch event is - one-time trigger, sent to the client that set the watch, which occurs when - the data for which the watch was set changes. There are three key points - to consider in this definition of a watch:</para> - - <itemizedlist> - <listitem> - <para><emphasis role="bold">One-time trigger</emphasis></para> - - <para>One watch event will be sent to the client when the data has changed. - For example, if a client does a getData("/znode1", true) and later the - data for /znode1 is changed or deleted, the client will get a watch - event for /znode1. If /znode1 changes again, no watch event will be - sent unless the client has done another read that sets a new - watch.</para> - </listitem> - - <listitem> - <para><emphasis role="bold">Sent to the client</emphasis></para> - - <para>This implies that an event is on the way to the client, but may - not reach the client before the successful return code to the change - operation reaches the client that initiated the change. Watches are - sent asynchronously to watchers. ZooKeeper provides an ordering - guarantee: a client will never see a change for which it has set a - watch until it first sees the watch event. Network delays or other - factors may cause different clients to see watches and return codes - from updates at different times. The key point is that everything seen - by the different clients will have a consistent order.</para> - </listitem> - - <listitem> - <para><emphasis role="bold">The data for which the watch was - set</emphasis></para> - - <para>This refers to the different ways a node can change. It - helps to think of ZooKeeper as maintaining two lists of - watches: data watches and child watches. getData() and - exists() set data watches. getChildren() sets child - watches. Alternatively, it may help to think of watches being - set according to the kind of data returned. getData() and - exists() return information about the data of the node, - whereas getChildren() returns a list of children. Thus, - setData() will trigger data watches for the znode being set - (assuming the set is successful). A successful create() will - trigger a data watch for the znode being created and a child - watch for the parent znode. A successful delete() will trigger - both a data watch and a child watch (since there can be no - more children) for a znode being deleted as well as a child - watch for the parent znode.</para> - </listitem> - </itemizedlist> - - <para>Watches are maintained locally at the ZooKeeper server to which the - client is connected. This allows watches to be lightweight to set, - maintain, and dispatch. When a client connects to a new server, the watch - will be triggered for any session events. Watches will not be received - while disconnected from a server. When a client reconnects, any previously - registered watches will be reregistered and triggered if needed. In - general this all occurs transparently. There is one case where a watch - may be missed: a watch for the existence of a znode not yet created will - be missed if the znode is created and deleted while disconnected.</para> - - <section id="sc_WatchSemantics"> - <title>Semantics of Watches</title> - - <para> We can set watches with the three calls that read the state of - ZooKeeper: exists, getData, and getChildren. The following list details - the events that a watch can trigger and the calls that enable them: - </para> - - <itemizedlist> - <listitem> - <para><emphasis role="bold">Created event:</emphasis></para> - <para>Enabled with a call to exists.</para> - </listitem> - - <listitem> - <para><emphasis role="bold">Deleted event:</emphasis></para> - <para>Enabled with a call to exists, getData, and getChildren.</para> - </listitem> - - <listitem> - <para><emphasis role="bold">Changed event:</emphasis></para> - <para>Enabled with a call to exists and getData.</para> - </listitem> - - <listitem> - <para><emphasis role="bold">Child event:</emphasis></para> - <para>Enabled with a call to getChildren.</para> - </listitem> - </itemizedlist> - </section> - - <section id="sc_WatchGuarantees"> - <title>What ZooKeeper Guarantees about Watches</title> - - <para>With regard to watches, ZooKeeper maintains these - guarantees:</para> - - <itemizedlist> - <listitem> - <para>Watches are ordered with respect to other events, other - watches, and asynchronous replies. The ZooKeeper client libraries - ensures that everything is dispatched in order.</para> - </listitem> - </itemizedlist> - - <itemizedlist> - <listitem> - <para>A client will see a watch event for a znode it is watching - before seeing the new data that corresponds to that znode.</para> - </listitem> - </itemizedlist> - - <itemizedlist> - <listitem> - <para>The order of watch events from ZooKeeper corresponds to the - order of the updates as seen by the ZooKeeper service.</para> - </listitem> - </itemizedlist> - </section> - - <section id="sc_WatchRememberThese"> - <title>Things to Remember about Watches</title> - - <itemizedlist> - <listitem> - <para>Watches are one time triggers; if you get a watch event and - you want to get notified of future changes, you must set another - watch.</para> - </listitem> - </itemizedlist> - - <itemizedlist> - <listitem> - <para>Because watches are one time triggers and there is latency - between getting the event and sending a new request to get a watch - you cannot reliably see every change that happens to a node in - ZooKeeper. Be prepared to handle the case where the znode changes - multiple times between getting the event and setting the watch - again. (You may not care, but at least realize it may - happen.)</para> - </listitem> - </itemizedlist> - - <itemizedlist> - <listitem> - <para>A watch object, or function/context pair, will only be - triggered once for a given notification. For example, if the same - watch object is registered for an exists and a getData call for the - same file and that file is then deleted, the watch object would - only be invoked once with the deletion notification for the file. - </para> - </listitem> - </itemizedlist> - - <itemizedlist> - <listitem> - <para>When you disconnect from a server (for example, when the - server fails), you will not get any watches until the connection - is reestablished. For this reason session events are sent to all - outstanding watch handlers. Use session events to go into a safe - mode: you will not be receiving events while disconnected, so your - process should act conservatively in that mode.</para> - </listitem> - </itemizedlist> - </section> - </section> - - <section id="sc_ZooKeeperAccessControl"> - <title>ZooKeeper access control using ACLs</title> - - <para>ZooKeeper uses ACLs to control access to its znodes (the - data nodes of a ZooKeeper data tree). The ACL implementation is - quite similar to UNIX file access permissions: it employs - permission bits to allow/disallow various operations against a - node and the scope to which the bits apply. Unlike standard UNIX - permissions, a ZooKeeper node is not limited by the three standard - scopes for user (owner of the file), group, and world - (other). ZooKeeper does not have a notion of an owner of a - znode. Instead, an ACL specifies sets of ids and permissions that - are associated with those ids.</para> - - <para>Note also that an ACL pertains only to a specific znode. In - particular it does not apply to children. For example, if - <emphasis>/app</emphasis> is only readable by ip:172.16.16.1 and - <emphasis>/app/status</emphasis> is world readable, anyone will - be able to read <emphasis>/app/status</emphasis>; ACLs are not - recursive.</para> - - <para>ZooKeeper supports pluggable authentication schemes. Ids are - specified using the form <emphasis>scheme:id</emphasis>, - where <emphasis>scheme</emphasis> is a the authentication scheme - that the id corresponds to. For - example, <emphasis>ip:172.16.16.1</emphasis> is an id for a - host with the address <emphasis>172.16.16.1</emphasis>.</para> - - <para>When a client connects to ZooKeeper and authenticates - itself, ZooKeeper associates all the ids that correspond to a - client with the clients connection. These ids are checked against - the ACLs of znodes when a clients tries to access a node. ACLs are - made up of pairs of <emphasis>(scheme:expression, - perms)</emphasis>. The format of - the <emphasis>expression</emphasis> is specific to the scheme. For - example, the pair <emphasis>(ip:19.22.0.0/16, READ)</emphasis> - gives the <emphasis>READ</emphasis> permission to any clients with - an IP address that starts with 19.22.</para> - - <section id="sc_ACLPermissions"> - <title>ACL Permissions</title> - - <para>ZooKeeper supports the following permissions:</para> - - <itemizedlist> - <listitem><para><emphasis role="bold">CREATE</emphasis>: you can create a child node</para></listitem> - <listitem><para><emphasis role="bold">READ</emphasis>: you can get data from a node and list its children.</para></listitem> - <listitem><para><emphasis role="bold">WRITE</emphasis>: you can set data for a node</para></listitem> - <listitem><para><emphasis role="bold">DELETE</emphasis>: you can delete a child node</para></listitem> - <listitem><para><emphasis role="bold">ADMIN</emphasis>: you can set permissions</para></listitem> - </itemizedlist> - - <para>The <emphasis>CREATE</emphasis> - and <emphasis>DELETE</emphasis> permissions have been broken out - of the <emphasis>WRITE</emphasis> permission for finer grained - access controls. The cases for <emphasis>CREATE</emphasis> - and <emphasis>DELETE</emphasis> are the following:</para> - - <para>You want A to be able to do a set on a ZooKeeper node, but - not be able to <emphasis>CREATE</emphasis> - or <emphasis>DELETE</emphasis> children.</para> - - <para><emphasis>CREATE</emphasis> - without <emphasis>DELETE</emphasis>: clients create requests by - creating ZooKeeper nodes in a parent directory. You want all - clients to be able to add, but only request processor can - delete. (This is kind of like the APPEND permission for - files.)</para> - - <para>Also, the <emphasis>ADMIN</emphasis> permission is there - since ZooKeeper doesnât have a notion of file owner. In some - sense the <emphasis>ADMIN</emphasis> permission designates the - entity as the owner. ZooKeeper doesnât support the LOOKUP - permission (execute permission bit on directories to allow you - to LOOKUP even though you can't list the directory). Everyone - implicitly has LOOKUP permission. This allows you to stat a - node, but nothing more. (The problem is, if you want to call - zoo_exists() on a node that doesn't exist, there is no - permission to check.)</para> - - <section id="sc_BuiltinACLSchemes"> - <title>Builtin ACL Schemes</title> - - <para>ZooKeeeper has the following built in schemes:</para> - - <itemizedlist> - <listitem><para><emphasis role="bold">world</emphasis> has a - single id, <emphasis>anyone</emphasis>, that represents - anyone.</para></listitem> - - <listitem><para><emphasis role="bold">auth</emphasis> doesn't - use any id, represents any authenticated - user.</para></listitem> - - <listitem><para><emphasis role="bold">digest</emphasis> uses - a <emphasis>username:password</emphasis> string to generate - MD5 hash which is then used as an ACL ID - identity. Authentication is done by sending - the <emphasis>username:password</emphasis> in clear text. When - used in the ACL the expression will be - the <emphasis>username:base64</emphasis> - encoded <emphasis>SHA1</emphasis> - password <emphasis>digest</emphasis>.</para> - </listitem> - - <listitem><para><emphasis role="bold">ip</emphasis> uses the - client host IP as an ACL ID identity. The ACL expression is of - the form <emphasis>addr/bits</emphasis> where the most - significant <emphasis>bits</emphasis> - of <emphasis>addr</emphasis> are matched against the most - significant <emphasis>bits</emphasis> of the client host - IP.</para></listitem> - - </itemizedlist> - </section> - - <section> - <title>ZooKeeper C client API</title> - - <para>The following constants are provided by the ZooKeeper C - library:</para> - - <itemizedlist> - <listitem><para><emphasis>const</emphasis> <emphasis>int</emphasis> ZOO_PERM_READ; //can read nodeâs value and list its children</para></listitem> - <listitem><para><emphasis>const</emphasis> <emphasis>int</emphasis> ZOO_PERM_WRITE;// can set the nodeâs value</para></listitem> - <listitem><para><emphasis>const</emphasis> <emphasis>int</emphasis> ZOO_PERM_CREATE; //can create children</para></listitem> - <listitem><para><emphasis>const</emphasis> <emphasis>int</emphasis> ZOO_PERM_DELETE;// can delete children</para></listitem> - <listitem><para><emphasis>const</emphasis> <emphasis>int</emphasis> ZOO_PERM_ADMIN; //can execute set_acl()</para></listitem> - <listitem><para><emphasis>const</emphasis> <emphasis>int</emphasis> ZOO_PERM_ALL;// all of the above flags ORâd together</para></listitem> - </itemizedlist> - - <para>The following are the standard ACL IDs:</para> - - <itemizedlist> - <listitem><para><emphasis>struct</emphasis> Id ZOO_ANYONE_ID_UNSAFE; //(âworldâ,âanyoneâ)</para></listitem> - <listitem><para><emphasis>struct</emphasis> Id ZOO_AUTH_IDS;// (âauthâ,ââ)</para></listitem> - </itemizedlist> - - <para>ZOO_AUTH_IDS empty identity string should be interpreted as âthe identity of the creatorâ.</para> - - <para>ZooKeeper client comes with three standard ACLs:</para> - - <itemizedlist> - <listitem><para><emphasis>struct</emphasis> ACL_vector ZOO_OPEN_ACL_UNSAFE; //(ZOO_PERM_ALL,ZOO_ANYONE_ID_UNSAFE)</para></listitem> - <listitem><para><emphasis>struct</emphasis> ACL_vector ZOO_READ_ACL_UNSAFE;// (ZOO_PERM_READ, ZOO_ANYONE_ID_UNSAFE)</para></listitem> - <listitem><para><emphasis>struct</emphasis> ACL_vector ZOO_CREATOR_ALL_ACL; //(ZOO_PERM_ALL,ZOO_AUTH_IDS)</para></listitem> - </itemizedlist> - - <para>The ZOO_OPEN_ACL_UNSAFE is completely open free for all - ACL: any application can execute any operation on the node and - can create, list and delete its children. The - ZOO_READ_ACL_UNSAFE is read-only access for any - application. CREATE_ALL_ACL grants all permissions to the - creator of the node. The creator must have been authenticated by - the server (for example, using â<emphasis>digest</emphasis>â - scheme) before it can create nodes with this ACL.</para> - - <para>The following ZooKeeper operations deal with ACLs:</para> - - <itemizedlist><listitem> - <para><emphasis>int</emphasis> <emphasis>zoo_add_auth</emphasis> - (zhandle_t *zh,<emphasis>const</emphasis> <emphasis>char</emphasis>* - scheme,<emphasis>const</emphasis> <emphasis>char</emphasis>* - cert, <emphasis>int</emphasis> certLen, void_completion_t - completion, <emphasis>const</emphasis> <emphasis>void</emphasis> - *data);</para> - </listitem></itemizedlist> - - <para>The application uses the zoo_add_auth function to - authenticate itself to the server. The function can be called - multiple times if the application wants to authenticate using - different schemes and/or identities.</para> - - <itemizedlist><listitem> - <para><emphasis>int</emphasis> <emphasis>zoo_create</emphasis> - (zhandle_t *zh, <emphasis>const</emphasis> <emphasis>char</emphasis> - *path, <emphasis>const</emphasis> <emphasis>char</emphasis> - *value,<emphasis>int</emphasis> - valuelen, <emphasis>const</emphasis> <emphasis>struct</emphasis> - ACL_vector *acl, <emphasis>int</emphasis> - flags,<emphasis>char</emphasis> - *realpath, <emphasis>int</emphasis> - max_realpath_len);</para> - </listitem></itemizedlist> - - <para>zoo_create(...) operation creates a new node. The acl - parameter is a list of ACLs associated with the node. The parent - node must have the CREATE permission bit set.</para> - - <itemizedlist><listitem> - <para><emphasis>int</emphasis> <emphasis>zoo_get_acl</emphasis> - (zhandle_t *zh, <emphasis>const</emphasis> <emphasis>char</emphasis> - *path,<emphasis>struct</emphasis> ACL_vector - *acl, <emphasis>struct</emphasis> Stat *stat);</para> - </listitem></itemizedlist> - - <para>This operation returns a nodeâs ACL info.</para> - - <itemizedlist><listitem> - <para><emphasis>int</emphasis> <emphasis>zoo_set_acl</emphasis> - (zhandle_t *zh, <emphasis>const</emphasis> <emphasis>char</emphasis> - *path, <emphasis>int</emphasis> - version,<emphasis>const</emphasis> <emphasis>struct</emphasis> - ACL_vector *acl);</para> - </listitem></itemizedlist> - - <para>This function replaces nodeâs ACL list with a new one. The - node must have the ADMIN permission set.</para> - - <para>Here is a sample code that makes use of the above APIs to - authenticate itself using the â<emphasis>foo</emphasis>â scheme - and create an ephemeral node â/xyzâ with create-only - permissions.</para> - - <note><para>This is a very simple example which is intended to show - how to interact with ZooKeeper ACLs - specifically. See <filename>.../trunk/src/c/src/cli.c</filename> - for an example of a C client implementation</para> - </note> - - <programlisting> -#include <string.h> -#include <errno.h> - -#include "zookeeper.h" - -static zhandle_t *zh; - -/** - * In this example this method gets the cert for your - * environment -- you must provide - */ -char *foo_get_cert_once(char* id) { return 0; } - -/** Watcher function -- empty for this example, not something you should - * do in real code */ -void watcher(zhandle_t *zzh, int type, int state, const char *path, - void *watcherCtx) {} - -int main(int argc, char argv) { - char buffer[512]; - char p[2048]; - char *cert=0; - char appId[64]; - - strcpy(appId, "example.foo_test"); - cert = foo_get_cert_once(appId); - if(cert!=0) { - fprintf(stderr, - "Certificate for appid [%s] is [%s]\n",appId,cert); - strncpy(p,cert, sizeof(p)-1); - free(cert); - } else { - fprintf(stderr, "Certificate for appid [%s] not found\n",appId); - strcpy(p, "dummy"); - } - - zoo_set_debug_level(ZOO_LOG_LEVEL_DEBUG); - - zh = zookeeper_init("localhost:3181", watcher, 10000, 0, 0, 0); - if (!zh) { - return errno; - } - if(zoo_add_auth(zh,"foo",p,strlen(p),0,0)!=ZOK) - return 2; - - struct ACL CREATE_ONLY_ACL[] = {{ZOO_PERM_CREATE, ZOO_AUTH_IDS}}; - struct ACL_vector CREATE_ONLY = {1, CREATE_ONLY_ACL}; - int rc = zoo_create(zh,"/xyz","value", 5, &CREATE_ONLY, ZOO_EPHEMERAL, - buffer, sizeof(buffer)-1); - - /** this operation will fail with a ZNOAUTH error */ - int buflen= sizeof(buffer); - struct Stat stat; - rc = zoo_get(zh, "/xyz", 0, buffer, &buflen, &stat); - if (rc) { - fprintf(stderr, "Error %d for %s\n", rc, __LINE__); - } - - zookeeper_close(zh); - return 0; -} - </programlisting> - </section> - </section> - </section> - - <section id="sc_ZooKeeperPluggableAuthentication"> - <title>Pluggable ZooKeeper authentication</title> - - <para>ZooKeeper runs in a variety of different environments with - various different authentication schemes, so it has a completely - pluggable authentication framework. Even the builtin authentication - schemes use the pluggable authentication framework.</para> - - <para>To understand how the authentication framework works, first you must - understand the two main authentication operations. The framework - first must authenticate the client. This is usually done as soon as - the client connects to a server and consists of validating information - sent from or gathered about a client and associating it with the connection. - The second operation handled by the framework is finding the entries in an - ACL that correspond to client. ACL entries are <<emphasis>idspec, - permissions</emphasis>> pairs. The <emphasis>idspec</emphasis> may be - a simple string match against the authentication information associated - with the connection or it may be a expression that is evaluated against that - information. It is up to the implementation of the authentication plugin - to do the match. Here is the interface that an authentication plugin must - implement:</para> - - <programlisting> -public interface AuthenticationProvider { - String getScheme(); - KeeperException.Code handleAuthentication(ServerCnxn cnxn, byte authData[]); - boolean isValid(String id); - boolean matches(String id, String aclExpr); - boolean isAuthenticated(); -} - </programlisting> - - <para>The first method <emphasis>getScheme</emphasis> returns the string - that identifies the plugin. Because we support multiple methods of authentication, - an authentication credential or an <emphasis>idspec</emphasis> will always be - prefixed with <emphasis>scheme:</emphasis>. The ZooKeeper server uses the scheme - returned by the authentication plugin to determine which ids the scheme - applies to.</para> - - <para><emphasis>handleAuthentication</emphasis> is called when a client - sends authentication information to be associated with a connection. The - client specifies the scheme to which the information corresponds. The - ZooKeeper server passes the information to the authentication plugin whose - <emphasis>getScheme</emphasis> matches the scheme passed by the client. The - implementor of <emphasis>handleAuthentication</emphasis> will usually return - an error if it determines that the information is bad, or it will associate information - with the connection using <emphasis>cnxn.getAuthInfo().add(new Id(getScheme(), data))</emphasis>. - </para> - - <para>The authentication plugin is involved in both setting and using ACLs. When an - ACL is set for a znode, the ZooKeeper server will pass the id part of the entry to - the <emphasis>isValid(String id)</emphasis> method. It is up to the plugin to verify - that the id has a correct form. For example, <emphasis>ip:172.16.0.0/16</emphasis> - is a valid id, but <emphasis>ip:host.com</emphasis> is not. If the new ACL includes - an "auth" entry, <emphasis>isAuthenticated</emphasis> is used to see if the - authentication information for this scheme that is assocatied with the connection - should be added to the ACL. Some schemes - should not be included in auth. For example, the IP address of the client is not - considered as an id that should be added to the ACL if auth is specified.</para> - - <para>ZooKeeper invokes - <emphasis>matches(String id, String aclExpr)</emphasis> when checking an ACL. It - needs to match authentication information of the client against the relevant ACL - entries. To find the entries which apply to the client, the ZooKeeper server will - find the scheme of each entry and if there is authentication information - from that client for that scheme, <emphasis>matches(String id, String aclExpr)</emphasis> - will be called with <emphasis>id</emphasis> set to the authentication information - that was previously added to the connection by <emphasis>handleAuthentication</emphasis> and - <emphasis>aclExpr</emphasis> set to the id of the ACL entry. The authentication plugin - uses its own logic and matching scheme to determine if <emphasis>id</emphasis> is included - in <emphasis>aclExpr</emphasis>. - </para> - - <para>There are two built in authentication plugins: <emphasis>ip</emphasis> and - <emphasis>digest</emphasis>. Additional plugins can adding using system properties. At - startup the ZooKeeper server will look for system properties that start with - "zookeeper.authProvider." and interpret the value of those properties as the class name - of an authentication plugin. These properties can be set using the - <emphasis>-Dzookeeeper.authProvider.X=com.f.MyAuth</emphasis> or adding entries such as - the following in the server configuration file:</para> - - <programlisting> -authProvider.1=com.f.MyAuth -authProvider.2=com.f.MyAuth2 - </programlisting> - - <para>Care should be taking to ensure that the suffix on the property is unique. If there are - duplicates such as <emphasis>-Dzookeeeper.authProvider.X=com.f.MyAuth -Dzookeeper.authProvider.X=com.f.MyAuth2</emphasis>, - only one will be used. Also all servers must have the same plugins defined, otherwise clients using - the authentication schemes provided by the plugins will have problems connecting to some servers. - </para> - </section> - - <section id="ch_zkGuarantees"> - <title>Consistency Guarantees</title> - - <para>ZooKeeper is a high performance, scalable service. Both reads and - write operations are designed to be fast, though reads are faster than - writes. The reason for this is that in the case of reads, ZooKeeper can - serve older data, which in turn is due to ZooKeeper's consistency - guarantees:</para> - - <variablelist> - <varlistentry> - <term>Sequential Consistency</term> - - <listitem> - <para>Updates from a client will be applied in the order that they - were sent.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Atomicity</term> - - <listitem> - <para>Updates either succeed or fail -- there are no partial - results.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Single System Image</term> - - <listitem> - <para>A client will see the same view of the service regardless of - the server that it connects to.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>Reliability</term> - - <listitem> - <para>Once an update has been applied, it will persist from that - time forward until a client overwrites the update. This guarantee - has two corollaries:</para> - - <orderedlist> - <listitem> - <para>If a client gets a successful return code, the update will - have been applied. On some failures (communication errors, - timeouts, etc) the client will not know if the update has - applied or not. We take steps to minimize the failures, but the - guarantee is only present with successful return codes. - (This is called the <emphasis>monotonicity condition</emphasis> in Paxos.)</para> - </listitem> - - <listitem> - <para>Any updates that are seen by the client, through a read - request or successful update, will never be rolled back when - recovering from server failures.</para> - </listitem> - </orderedlist> - </listitem> - </varlistentry> - - <varlistentry> - <term>Timeliness</term> - - <listitem> - <para>The clients view of the system is guaranteed to be up-to-date - within a certain time bound (on the order of tens of seconds). - Either system changes will be seen by a client within this bound, or - the client will detect a service outage.</para> - </listitem> - </varlistentry> - </variablelist> - - <para>Using these consistency guarantees it is easy to build higher level - functions such as leader election, barriers, queues, and read/write - revocable locks solely at the ZooKeeper client (no additions needed to - ZooKeeper). See <ulink url="recipes.html">Recipes and Solutions</ulink> - for more details.</para> - - <note> - <para>Sometimes developers mistakenly assume one other guarantee that - ZooKeeper does <emphasis>not</emphasis> in fact make. This is:</para> - - <variablelist> - <varlistentry> - <term>Simultaneously Consistent Cross-Client Views</term> - - <listitem> - <para>ZooKeeper does not guarantee that at every instance in - time, two different clients will have identical views of - ZooKeeper data. Due to factors like network delays, one client - may perform an update before another client gets notified of the - change. Consider the scenario of two clients, A and B. If client - A sets the value of a znode /a from 0 to 1, then tells client B - to read /a, client B may read the old value of 0, depending on - which server it is connected to. If it - is important that Client A and Client B read the same value, - Client B should should call the <emphasis - role="bold">sync()</emphasis> method from the ZooKeeper API - method before it performs its read.</para> - - <para>So, ZooKeeper by itself doesn't guarantee that changes occur - synchronously across all servers, but ZooKeeper - primitives can be used to construct higher level functions that - provide useful client synchronization. (For more information, - see the <ulink - url="recipes.html">ZooKeeper Recipes</ulink>. - <emphasis>[tbd:..]</emphasis>).</para> - </listitem> - </varlistentry> - </variablelist> - </note> - </section> - - <section id="ch_bindings"> - <title>Bindings</title> - - <para>The ZooKeeper client libraries come in two languages: Java and C. - The following sections describe these.</para> - - <section> - <title>Java Binding</title> - - <para>There are two packages that make up the ZooKeeper Java binding: - <emphasis role="bold">org.apache.zookeeper</emphasis> and <emphasis - role="bold">org.apache.zookeeper.data</emphasis>. The rest of the - packages that make up ZooKeeper are used internally or are part of the - server implementation. The <emphasis - role="bold">org.apache.zookeeper.data</emphasis> package is made up of - generated classes that are used simply as containers.</para> - - <para>The main class used by a ZooKeeper Java client is the <emphasis - role="bold">ZooKeeper</emphasis> class. Its two constructors differ only - by an optional session id and password. ZooKeeper supports session - recovery accross instances of a process. A Java program may save its - session id and password to stable storage, restart, and recover the - session that was used by the earlier instance of the program.</para> - - <para>When a ZooKeeper object is created, two threads are created as - well: an IO thread and an event thread. All IO happens on the IO thread - (using Java NIO). All event callbacks happen on the event thread. - Session maintenance such as reconnecting to ZooKeeper servers and - maintaining heartbeat is done on the IO thread. Responses for - synchronous methods are also processed in the IO thread. All responses - to asynchronous methods and watch events are processed on the event - thread. There are a few things to notice that result from this - design:</para> - - <itemizedlist> - <listitem> - <para>All completions for asynchronous calls and watcher callbacks - will be made in order, one at a time. The caller can do any - processing they wish, but no other callbacks will be processed - during that time.</para> - </listitem> - - <listitem> - <para>Callbacks do not block the processing of the IO thread or the - processing of the synchronous calls.</para> - </listitem> - - <listitem> - <para>Synchronous calls may not return in the correct order. For - example, assume a client does the following processing: issues an - asynchronous read of node <emphasis role="bold">/a</emphasis> with - <emphasis>watch</emphasis> set to true, and then in the completion - callback of the read it does a synchronous read of <emphasis - role="bold">/a</emphasis>. (Maybe not good practice, but not illegal - either, and it makes for a simple example.)</para> - - <para>Note that if there is a change to <emphasis - role="bold">/a</emphasis> between the asynchronous read and the - synchronous read, the client library will receive the watch event - saying <emphasis role="bold">/a</emphasis> changed before the - response for the synchronous read, but because the completion - callback is blocking the event queue, the synchronous read will - return with the new value of <emphasis role="bold">/a</emphasis> - before the watch event is processed.</para> - </listitem> - </itemizedlist> - - <para>Finally, the rules associated with shutdown are straightforward: - once a ZooKeeper object is closed or receives a fatal event - (SESSION_EXPIRED and AUTH_FAILED), the ZooKeeper object becomes invalid. - On a close, the two threads shut down and any further access on zookeeper - handle is undefined behavior and should be avoided. </para> - </section> - - <section> - <title>C Binding</title> - - <para>The C binding has a single-threaded and multi-threaded library. - The multi-threaded library is easiest to use and is most similar to the - Java API. This library will create an IO thread and an event dispatch - thread for handling connection maintenance and callbacks. The - single-threaded library allows ZooKeeper to be used in event driven - applications by exposing the event loop used in the multi-threaded - library.</para> - - <para>The package includes two shared libraries: zookeeper_st and - zookeeper_mt. The former only provides the asynchronous APIs and - callbacks for integrating into the application's event loop. The only - reason this library exists is to support the platforms were a - <emphasis>pthread</emphasis> library is not available or is unstable - (i.e. FreeBSD 4.x). In all other cases, application developers should - link with zookeeper_mt, as it includes support for both Sync and Async - API.</para> - - <section> - <title>Installation</title> - - <para>If you're building the client from a check-out from the Apache - repository, follow the steps outlined below. If you're building from a - project source package downloaded from apache, skip to step <emphasis - role="bold">3</emphasis>.</para> - - <orderedlist> - <listitem> - <para>Run <command>ant compile_jute</command> from the ZooKeeper - top level directory (<filename>.../trunk</filename>). - This will create a directory named "generated" under - <filename>.../trunk/src/c</filename>.</para> - </listitem> - - <listitem> - <para>Change directory to the<filename>.../trunk/src/c</filename> - and run <command>autoreconf -if</command> to bootstrap <emphasis - role="bold">autoconf</emphasis>, <emphasis - role="bold">automake</emphasis> and <emphasis - role="bold">libtool</emphasis>. Make sure you have <emphasis - role="bold">autoconf version 2.59</emphasis> or greater installed. - Skip to step<emphasis role="bold"> 4</emphasis>.</para> - </listitem> - - <listitem> - <para>If you are building from a project source package, - unzip/untar the source tarball and cd to the<filename> - zookeeper-x.x.x/src/c</filename> directory.</para> - </listitem> - - <listitem> - <para>Run <command>./configure <your-options></command> to - generate the makefile. Here are some of options the <emphasis - role="bold">configure</emphasis> utility supports that can be - useful in this step:</para> - - <itemizedlist> - <listitem> - <para><command>--enable-debug</command></para> - - <para>Enables optimization and enables debug info compiler - options. (Disabled by default.)</para> - </listitem> - - <listitem> - <para><command>--without-syncapi </command></para> - - <para>Disables Sync API support; zookeeper_mt library won't be - built. (Enabled by default.)</para> - </listitem> - - <listitem> - <para><command>--disable-static </command></para> - - <para>Do not build static libraries. (Enabled by - default.)</para> - </listitem> - - <listitem> - <para><command>--disable-shared</command></para> - - <para>Do not build shared libraries. (Enabled by - default.)</para> - </listitem> - </itemizedlist> - - <note> - <para>See INSTALL for general information about running - <emphasis role="bold">configure</emphasis>.</para> - </note> - </listitem> - - <listitem> - <para>Run <command>make</command> or <command>make - install</command> to build the libraries and install them.</para> - </listitem> - - <listitem> - <para>To generate doxygen documentation for the ZooKeeper API, run - <command>make doxygen-doc</command>. All documentation will be - placed in a new subfolder named docs. By default, this command - only generates HTML. For information on other document formats, - run <command>./configure --help</command></para> - </listitem> - </orderedlist> - </section> - - <section> - <title>Building Your Own C Client</title> - - <para>In order to be able to use the ZooKeeper API in your application - you have to remember to</para> - - <orderedlist> - <listitem> - <para>Include ZooKeeper header: #include - <zookeeper/zookeeper.h></para> - </listitem> - - <listitem> - <para>If you are building a multithreaded client, compile with - -DTHREADED compiler flag to enable the multi-threaded version of - the library, and then link against against the - <emphasis>zookeeper_mt</emphasis> library. If you are building a - single-threaded client, do not compile with -DTHREADED, and be - sure to link against the<emphasis> zookeeper_st - </emphasis>library.</para> - </listitem> - </orderedlist> - - <note><para> - See <filename>.../trunk/src/c/src/cli.c</filename> - for an example of a C client implementation</para> - </note> - </section> - </section> - </section> - - <section id="ch_guideToZkOperations"> - <title>Building Blocks: A Guide to ZooKeeper Operations</title> - - <para>This section surveys all the operations a developer can perform - against a ZooKeeper server. It is lower level information than the earlier - concepts chapters in this manual, but higher level than the ZooKeeper API - Reference. It covers these topics:</para> - - <itemizedlist> - <listitem> - <para><xref linkend="sc_connectingToZk" /></para> - </listitem> - </itemizedlist> - - <section id="sc_errorsZk"> - <title>Handling Errors</title> - - <para>Both the Java and C client bindings may report errors. The Java client binding does so by throwing KeeperException, calling code() on the exception will return the specific error code. The C client binding returns an error code as defined in the enum ZOO_ERRORS. API callbacks indicate result code for both language bindings. See the API documentation (javadoc for Java, doxygen for C) for full details on the possible errors and their meaning.</para> - </section> - - <section id="sc_connectingToZk"> - <title>Connecting to ZooKeeper</title> - - <para></para> - </section> - - <section id="sc_readOps"> - <title>Read Operations</title> - - <para></para> - </section> - - <section id="sc_writeOps"> - <title>Write Operations</title> - - <para></para> - </section> - - <section id="sc_handlingWatches"> - <title>Handling Watches</title> - - <para></para> - </section> - - <section id="sc_miscOps"> - <title>Miscelleaneous ZooKeeper Operations</title> - <para></para> - </section> - - - </section> - - <section id="ch_programStructureWithExample"> - <title>Program Structure, with Simple Example</title> - - <para><emphasis>[tbd]</emphasis></para> - </section> - - <section id="ch_gotchas"> - <title>Gotchas: Common Problems and Troubleshooting</title> - - <para>So now you know ZooKeeper. It's fast, simple, your application - works, but wait ... something's wrong. Here are some pitfalls that - ZooKeeper users fall into:</para> - - <orderedlist> - <listitem> - <para>If you are using watches, you must look for the connected watch - event. When a ZooKeeper client disconnects from a server, you will - not receive notification of changes until reconnected. If you are - watching for a znode to come into existence, you will miss the event - if the znode is created and deleted while you are disconnected.</para> - </listitem> - - <listitem> - <para>You must test ZooKeeper server failures. The ZooKeeper service - can survive failures as long as a majority of servers are active. The - question to ask is: can your application handle it? In the real world - a client's connection to ZooKeeper can break. (ZooKeeper server - failures and network partitions are common reasons for connection - loss.) The ZooKeeper client library takes care of recovering your - connection and letting you know what happened, but you must make sure - that you recover your state and any outstanding requests that failed. - Find out if you got it right in the test lab, not in production - test - with a ZooKeeper service made up of a several of servers and subject - them to reboots.</para> - </listitem> - - <listitem> - <para>The list of ZooKeeper servers used by the client must match the - list of ZooKeeper servers that each ZooKeeper server has. Things can - work, although not optimally, if the client list is a subset of the - real list of ZooKeeper servers, but not if the client lists ZooKeeper - servers not in the ZooKeeper cluster.</para> - </listitem> - - <listitem> - <para>Be careful where you put that transaction log. The most - performance-critical part of ZooKeeper is the transaction log. - ZooKeeper must sync transactions to media before it returns a - response. A dedicated transaction log device is key to consistent good - performance. Putting the log on a busy device will adversely effect - performance. If you only have one storage device, put trace files on - NFS and increase the snapshotCount; it doesn't eliminate the problem, - but it can mitigate it.</para> - </listitem> - - <listitem> - <para>Set your Java max heap size correctly. It is very important to - <emphasis>avoid swapping.</emphasis> Going to disk unnecessarily will - almost certainly degrade your performance unacceptably. Remember, in - ZooKeeper, everything is ordered, so if one request hits the disk, all - other queued requests hit the disk.</para> - - <para>To avoid swapping, try to set the heapsize to the amount of - physical memory you have, minus the amount needed by the OS and cache. - The best way to determine an optimal heap size for your configurations - is to <emphasis>run load tests</emphasis>. If for some reason you - can't, be conservative in your estimates and choose a number well - below the limit that would cause your machine to swap. For example, on - a 4G machine, a 3G heap is a conservative estimate to start - with.</para> - </listitem> - </orderedlist> - </section> - - <appendix id="apx_linksToOtherInfo"> - <title>Links to Other Information</title> - - <para>Outside the formal documentation, there're several other sources of - information for ZooKeeper developers.</para> - - <variablelist> - <varlistentry> - <term>ZooKeeper Whitepaper <emphasis>[tbd: find url]</emphasis></term> - - <listitem> - <para>The definitive discussion of ZooKeeper design and performance, - by Yahoo! Research</para> - </listitem> - </varlistentry> - - <varlistentry> - <term>API Reference <emphasis>[tbd: find url]</emphasis></term> - - <listitem> - <para>The complete reference to the ZooKeeper API</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><ulink - url="http://us.dl1.yimg.com/download.yahoo.com/dl/ydn/zookeeper.m4v";>ZooKeeper - Talk at the Hadoup Summit 2008</ulink></term> - - <listitem> - <para>A video introduction to ZooKeeper, by Benjamin Reed of Yahoo! - Research</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><ulink - url="https://cwiki.apache.org/confluence/display/ZOOKEEPER/Tutorial";>Barrier and - Queue Tutorial</ulink></term> - - <listitem> - <para>The excellent Java tutorial by Flavio Junqueira, implementing - simple barriers and producer-consumer queues using ZooKeeper.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><ulink - url="https://cwiki.apache.org/confluence/display/ZOOKEEPER/ZooKeeperArticles";>ZooKeeper - - A Reliable, Scalable Distributed Coordination System</ulink></term> - - <listitem> - <para>An article by Todd Hoff (07/15/2008)</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><ulink url="recipes.html">ZooKeeper Recipes</ulink></term> - - <listitem> - <para>Pseudo-level discussion of the implementation of various - synchronization solutions with ZooKeeper: Event Handles, Queues, - Locks, and Two-phase Commits.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><emphasis>[tbd]</emphasis></term> - - <listitem> - <para>Any other good sources anyone can think of...</para> - </listitem> - </varlistentry> - </variablelist> - </appendix> -</article>
http://git-wip-us.apache.org/repos/asf/zookeeper/blob/c1efa954/src/docs/src/documentation/content/xdocs/zookeeperQuotas.xml ---------------------------------------------------------------------- diff --git a/src/docs/src/documentation/content/xdocs/zookeeperQuotas.xml b/src/docs/src/documentation/content/xdocs/zookeeperQuotas.xml deleted file mode 100644 index 7668e6a..0000000 --- a/src/docs/src/documentation/content/xdocs/zookeeperQuotas.xml +++ /dev/null @@ -1,71 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> - <!-- - Copyright 2002-2004 The Apache Software Foundation Licensed under the - Apache License, Version 2.0 (the "License"); you may not use this file - except in compliance with the License. You may obtain a copy of the - License at http://www.apache.org/licenses/LICENSE-2.0 Unless required - by applicable law or agreed to in writing, software distributed under - the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR - CONDITIONS OF ANY KIND, either express or implied. See the License for - the specific language governing permissions and limitations under the - License. - --> - <!DOCTYPE article PUBLIC "-//OASIS//DTD Simplified DocBook XML V1.0//EN" - "http://www.oasis-open.org/docbook/xml/simple/1.0/sdocbook.dtd";> -<article id="bk_Quota"> - <title>ZooKeeper Quota's Guide</title> - <subtitle>A Guide to Deployment and Administration</subtitle> - <articleinfo> - <legalnotice> - <para> - Licensed under the Apache License, Version 2.0 (the "License"); you - may not use this file except in compliance with the License. You may - obtain a copy of the License at - <ulink url="http://www.apache.org/licenses/LICENSE-2.0";>http://www.apache.org/licenses/LICENSE-2.0 - </ulink> - . - </para> - <para>Unless required by applicable law or agreed to in - writing, software distributed under the License is distributed on an - "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either - express or implied. See the License for the specific language - governing permissions and limitations under the License.</para> - </legalnotice> - <abstract> - <para>This document contains information about deploying, - administering and mantaining ZooKeeper. It also discusses best - practices and common problems.</para> - </abstract> - </articleinfo> - <section id="zookeeper_quotas"> - <title>Quotas</title> - <para> ZooKeeper has both namespace and bytes quotas. You can use the ZooKeeperMain class to setup quotas. - ZooKeeper prints <emphasis>WARN</emphasis> messages if users exceed the quota assigned to them. The messages - are printed in the log of the ZooKeeper. - </para> - <para><computeroutput>$ bin/zkCli.sh -server host:port</computeroutput></para> - <para> The above command gives you a command line option of using quotas.</para> - <section> - <title>Setting Quotas</title> - <para>You can use - <emphasis>setquota</emphasis> to set a quota on a ZooKeeper node. It has an option of setting quota with - -n (for namespace) - and -b (for bytes). </para> - <para> The ZooKeeper quota are stored in ZooKeeper itself in /zookeeper/quota. To disable other people from - changing the quota's set the ACL for /zookeeper/quota such that only admins are able to read and write to it. - </para> - </section> - <section> - <title>Listing Quotas</title> - <para> You can use - <emphasis>listquota</emphasis> to list a quota on a ZooKeeper node. - </para> - </section> - <section> - <title> Deleting Quotas</title> - <para> You can use - <emphasis>delquota</emphasis> to delete quota on a ZooKeeper node. - </para> - </section> - </section> - </article>
