On 19/03/11 16:00, Ted Dunning wrote:
Unfortunately this doesn't help much because it is hard to get the ports to
balance the load.
On Fri, Mar 18, 2011 at 8:30 PM, Michael Segel<[email protected]>wrote:
With a 1GBe port, you could go 100Mbs for the bandwidth limit.
If you bond your ports, you could go higher.
Port bonding is possible, its just harder to
-set up all the cabling
-be sure both ports are fully utilised
It's less expensive than 10G ether because those switches cost a lot
more, and with 2x1 you can have separate ToR switches for more redundancy.
For decommissioning, why not boost the rebalance bandwidth before you
trigger the decommission, then drop it afterwards.
-steve
