Hello Varun, i have patched and recompiled ganglia from source bit it still cores after the patch.
Here are some logs: Feb 15 09:39:14 master gmetad[16487]: RRD_update (/var/lib/ganglia/rrds/hadoop/slave4/metricssystem.MetricsSystem.publish_max_time.rrd): /var/lib/ganglia/rrds/hadoop/slave4/metricssystem.MetricsSystem.publish_max_time.rrd: converting '4.9E-324' to float: Numerical result out of range Feb 15 09:39:14 master gmetad[16487]: RRD_update (/var/lib/ganglia/rrds/hadoop/master/metricssystem.MetricsSystem.publish_imax_time.rrd): /var/lib/ganglia/rrds/hadoop/master/metricssystem.MetricsSystem.publish_imax_time.rrd: converting '4.9E-324' to float: Numerical result out of range Feb 15 09:39:14 master gmetad[16487]: RRD_update (/var/lib/ganglia/rrds/hadoop/slave1/metricssystem.MetricsSystem.publish_imax_time.rrd): /var/lib/ganglia/rrds/hadoop/slave1/metricssystem.MetricsSystem.publish_imax_time.rrd: converting '4.9E-324' to float: Numerical result out of range Feb 15 09:39:14 master gmetad[16487]: RRD_update (/var/lib/ganglia/rrds/hadoop/slave1/metricssystem.MetricsSystem.snapshot_imax_time.rrd): /var/lib/ganglia/rrds/hadoop/slave1/metricssystem.MetricsSystem.snapshot_imax_time.rrd: converting '4.9E-324' to float: Numerical result out of range Feb 15 09:39:14 master gmetad[16487]: RRD_update (/var/lib/ganglia/rrds/hadoop/slave1/metricssystem.MetricsSystem.publish_max_time.rrd): /var/lib/ganglia/rrds/hadoop/slave1/metricssystem.MetricsSystem.publish_max_time.rrd: converting '4.9E-324' to float: Numerical result out of range Feb 15 09:39:14 master gmetad[16487]: *** buffer overflow detected ***: gmetad terminated i am using hadoop.1.0.0 and ganglia 3.20 tarball. Cheers Mete On Sat, Feb 11, 2012 at 2:19 AM, Merto Mertek <[email protected]> wrote: > Varun unfortunately I have had some problems with deploying a new version > on the cluster.. Hadoop is not picking the new build in lib folder despite > a classpath is set to it. The new build is picked just if I put it in the > $HD_HOME/share/hadoop/, which is very strange.. I've done this on all nodes > and can access the web, but all tasktracker are being stopped because of an > error: > > INFO org.apache.hadoop.filecache.TrackerDistributedCacheManager: Cleanup... > > java.lang.InterruptedException: sleep interrupted > > at java.lang.Thread.sleep(Native Method) > > at > > > org.apache.hadoop.filecache.TrackerDistributedCacheManager$CleanupThread.run(TrackerDistributedCacheManager.java:926) > > > > > Probably the error is the consequence of an inadequate deploy of a jar.. I > will ask to the dev list how they do it or are you maybe having any other > idea? > > > > On 10 February 2012 17:10, Varun Kapoor <[email protected]> wrote: > > > Hey Merto, > > > > Any luck getting the patch running on your cluster? > > > > In case you're interested, there's now a JIRA for this: > > https://issues.apache.org/jira/browse/HADOOP-8052. > > > > Varun > > > > On Wed, Feb 8, 2012 at 7:45 PM, Varun Kapoor <[email protected]> > > wrote: > > > > > Your general procedure sounds correct (i.e. dropping your newly built > > .jar > > > into $HD_HOME/lib/), but to make sure it's getting picked up, you > should > > > explicitly add $HD_HOME/lib/ to your exported HADOOP_CLASSPATH > > environment > > > variable; here's mine, as an example: > > > > > > export HADOOP_CLASSPATH=".:./build/*.jar" > > > > > > About your second point, you certainly need to copy this newly patched > > > .jar to every node in your cluster, because my patch changes the value > > of a > > > couple metrics emitted TO gmetad (FROM all the nodes in the cluster), > so > > > without copying it over to every node in the cluster, gmetad will still > > > likely receive some bad metrics. > > > > > > Varun > > > > > > > > > On Wed, Feb 8, 2012 at 6:19 PM, Merto Mertek <[email protected]> > > wrote: > > > > > >> I will need your help. Please confirm if the following procedure is > > right. > > >> I have a dev environment where I pimp my scheduler (no hadoop running) > > and > > >> a small cluster environment where the changes(jars) are deployed with > > some > > >> scripts, however I have never compiled the whole hadoop from source > so > > I > > >> do not know if I am doing it right. I' ve done it as follow: > > >> > > >> a) apply a patch > > >> b) cd $HD_HOME; ant > > >> c) copy $HD_HOME/*build*/patched-core-hadoop.jar -> > > >> cluster:/$HD_HOME/*lib* > > >> d) run $HD_HOME/bin/start-all.sh > > >> > > >> Is this enough? When I tried to test "hadoop dfs -ls /" I could see > > that a > > >> new jar was not loaded and instead a jar from > > >> $HD_HOME/*share*/hadoop-20.205.0.jar > > >> was taken.. > > >> Should I copy the entire hadoop folder to all nodes and reconfigure > the > > >> entire cluster for the new build, or is enough if I configure it just > on > > >> the node where gmetad will run? > > >> > > >> > > >> > > >> > > >> > > >> > > >> On 8 February 2012 06:33, Varun Kapoor <[email protected]> > wrote: > > >> > > >> > I'm so sorry, Merto - like a silly goose, I attached the 2 patches > to > > my > > >> > reply, and of course the mailing list did not accept the attachment. > > >> > > > >> > I plan on opening JIRAs for this tomorrow, but till then, here are > > >> links to > > >> > the 2 patches (from my Dropbox account): > > >> > > > >> > - > http://dl.dropbox.com/u/4366344/gmetadBufferOverflow.Hadoop.patch > > >> > - > http://dl.dropbox.com/u/4366344/gmetadBufferOverflow.gmetad.patch > > >> > > > >> > Here's hoping this works for you, > > >> > > > >> > Varun > > >> > On Tue, Feb 7, 2012 at 6:00 PM, Merto Mertek <[email protected]> > > >> wrote: > > >> > > > >> > > Varun, have I missed your link to the patches? I have tried to > > search > > >> > them > > >> > > on jira but I did not find them.. Can you repost the link for > these > > >> two > > >> > > patches? > > >> > > > > >> > > Thank you.. > > >> > > > > >> > > On 7 February 2012 20:36, Varun Kapoor <[email protected]> > > >> wrote: > > >> > > > > >> > > > I'm sorry to hear that gmetad cores continuously for you guys. > > Since > > >> > I'm > > >> > > > not seeing that behavior, I'm going to just put out the 2 > possible > > >> > > patches > > >> > > > you could apply and wait to hear back from you. :) > > >> > > > > > >> > > > Option 1 > > >> > > > > > >> > > > * Apply gmetadBufferOverflow.Hadoop.patch to the relevant file ( > > >> > > > > > >> > > > > >> > > > >> > > > http://svn.apache.org/viewvc/hadoop/common/branches/branch-1/src/core/org/apache/hadoop/metrics2/util/SampleStat.java?view=markupinmysetup > > ) > > >> in your Hadoop sources and rebuild Hadoop. > > >> > > > > > >> > > > Option 2 > > >> > > > > > >> > > > * Apply gmetadBufferOverflow.gmetad.patch to > gmetad/process_xml.c > > >> and > > >> > > > rebuild gmetad. > > >> > > > > > >> > > > Only 1 of these 2 fixes is required, and it would help me if you > > >> could > > >> > > > first try Option 1 and let me know if that fixes things for you. > > >> > > > > > >> > > > Varun > > >> > > > > > >> > > > On Mon, Feb 6, 2012 at 10:36 PM, mete <[email protected]> wrote: > > >> > > > > > >> > > >> Same with Merto's situation here, it always overflows short > time > > >> after > > >> > > the > > >> > > >> restart. Without the hadoop metrics enabled everything is > smooth. > > >> > > >> Regards > > >> > > >> > > >> > > >> Mete > > >> > > >> > > >> > > >> On Tue, Feb 7, 2012 at 4:58 AM, Merto Mertek < > > [email protected]> > > >> > > wrote: > > >> > > >> > > >> > > >> > I have tried to run it but it repeats crashing.. > > >> > > >> > > > >> > > >> > - When you start gmetad and Hadoop is not emitting metrics, > > >> > > everything > > >> > > >> > > is peachy. > > >> > > >> > > > > >> > > >> > > > >> > > >> > Right, running just ganglia without running hadoop jobs seems > > >> stable > > >> > > >> for at > > >> > > >> > least a day.. > > >> > > >> > > > >> > > >> > > > >> > > >> > > - When you start Hadoop (and it thus starts emitting > > >> metrics), > > >> > > >> gmetad > > >> > > >> > > cores. > > >> > > >> > > > > >> > > >> > > > >> > > >> > True, with a following error : *** stack smashing detected > > ***: > > >> > > gmetad > > >> > > >> > terminated \n Segmentation fault > > >> > > >> > > > >> > > >> > - On my MacBookPro, it's a SIGABRT due to a buffer > > overflow. > > >> > > >> > > > > >> > > >> > > I believe this is happening for everyone. What I would like > > for > > >> > you > > >> > > to > > >> > > >> > try > > >> > > >> > > out are the following 2 scenarios: > > >> > > >> > > > > >> > > >> > > - Once gmetad cores, if you start it up again, does it > core > > >> > again? > > >> > > >> Does > > >> > > >> > > this process repeat ad infinitum? > > >> > > >> > > > > >> > > >> > - On my MBP, the core is a one-time thing, and restarting > > >> gmetad > > >> > > >> > > after the first core makes things run perfectly > > smoothly. > > >> > > >> > > - I know others are saying this core occurs > > >> continuously, > > >> > > but > > >> > > >> > they > > >> > > >> > > were all using ganglia-3.1.x, and I'm interested in > > how > > >> > > >> > > ganglia-3.2.0 > > >> > > >> > > behaves for you. > > >> > > >> > > > > >> > > >> > > > >> > > >> > It cores everytime I run it. The difference is just that > > >> sometimes a > > >> > > >> > segmentation faults appears instantly, and sometimes it > appears > > >> > after > > >> > > a > > >> > > >> > random time...lets say after a minute of running gmetad and > > >> > collecting > > >> > > >> > data. > > >> > > >> > > > >> > > >> > > > >> > > >> > > - If you start Hadoop first (so gmetad is not > running > > >> when > > >> > > the > > >> > > >> > > first batch of Hadoop metrics are emitted) and THEN start > > >> gmetad > > >> > > >> after > > >> > > >> > a > > >> > > >> > > few seconds, do you still see gmetad coring? > > >> > > >> > > > > >> > > >> > > > >> > > >> > Yes > > >> > > >> > > > >> > > >> > > > >> > > >> > > - On my MBP, this sequence works perfectly fine, and > > there > > >> > are > > >> > > no > > >> > > >> > > gmetad cores whatsoever. > > >> > > >> > > > > >> > > >> > > > >> > > >> > I have tested this scenario with 2 working nodes so two gmond > > >> plus > > >> > the > > >> > > >> head > > >> > > >> > gmond on the server where gmetad is located. I have checked > and > > >> all > > >> > of > > >> > > >> them > > >> > > >> > are versioned 3.2.0. > > >> > > >> > > > >> > > >> > Hope it helps.. > > >> > > >> > > > >> > > >> > > > >> > > >> > > > >> > > >> > > > > >> > > >> > > Bear in mind that this only addresses the gmetad coring > > issue - > > >> > the > > >> > > >> > > warnings emitted about '4.9E-324' being out of range will > > >> > continue, > > >> > > >> but I > > >> > > >> > > know what's causing that as well (and hope that my patch > > fixes > > >> it > > >> > > for > > >> > > >> > > free). > > >> > > >> > > > > >> > > >> > > Varun > > >> > > >> > > On Mon, Feb 6, 2012 at 2:39 PM, Merto Mertek < > > >> [email protected] > > >> > > > > >> > > >> > wrote: > > >> > > >> > > > > >> > > >> > > > Yes I am encoutering the same problems and like Mete said > > >> few > > >> > > >> seconds > > >> > > >> > > > after restarting a segmentation fault appears.. here is > my > > >> > conf.. > > >> > > >> > > > <http://pastebin.com/VgBjp08d> > > >> > > >> > > > > > >> > > >> > > > And here are some info from /var/log/messages (ubuntu > > server > > >> > > 10.10): > > >> > > >> > > > > > >> > > >> > > > kernel: [424447.140641] gmetad[26115] general protection > > >> > > >> > ip:7f7762428fdb > > >> > > >> > > > > sp:7f776362d370 error:0 in > > >> libgcc_s.so.1[7f776241a000+15000] > > >> > > >> > > > > > > >> > > >> > > > > > >> > > >> > > > When I compiled gmetad I used the following command: > > >> > > >> > > > > > >> > > >> > > > ./configure --with-gmetad --sysconfdir=/etc/ganglia > > >> > > >> > > > > CPPFLAGS="-I/usr/local/rrdtool-1.4.7/include" > > >> > > >> > > > > CFLAGS="-I/usr/local/rrdtool-1.4.7/include" > > >> > > >> > > > > LDFLAGS="-L/usr/local/rrdtool-1.4.7/lib" > > >> > > >> > > > > > > >> > > >> > > > > > >> > > >> > > > The same was tried with rrdtool 1.4.5. My current ganglia > > >> > version > > >> > > is > > >> > > >> > > 3.2.0 > > >> > > >> > > > and like Mete I tried it with version 3.1.7 but without > > >> > success.. > > >> > > >> > > > > > >> > > >> > > > Hope we will sort it out soon any solution.. > > >> > > >> > > > thank you > > >> > > >> > > > > > >> > > >> > > > > > >> > > >> > > > On 6 February 2012 20:09, mete <[email protected]> wrote: > > >> > > >> > > > > > >> > > >> > > > > Hello, > > >> > > >> > > > > i also face this issue when using GangliaContext31 and > > >> > > >> hadoop-1.0.0, > > >> > > >> > > and > > >> > > >> > > > > ganglia 3.1.7 (also tried 3.1.2). I continuously get > > buffer > > >> > > >> overflows > > >> > > >> > > as > > >> > > >> > > > > soon as i restart the gmetad. > > >> > > >> > > > > Regards > > >> > > >> > > > > Mete > > >> > > >> > > > > > > >> > > >> > > > > On Mon, Feb 6, 2012 at 7:42 PM, Vitthal "Suhas" Gogate > < > > >> > > >> > > > > [email protected]> wrote: > > >> > > >> > > > > > > >> > > >> > > > > > I assume you have seen the following information on > > >> Hadoop > > >> > > >> twiki, > > >> > > >> > > > > > http://wiki.apache.org/hadoop/GangliaMetrics > > >> > > >> > > > > > > > >> > > >> > > > > > So do you use GangliaContext31 in > > >> > hadoop-metrics2.properties? > > >> > > >> > > > > > > > >> > > >> > > > > > We use Ganglia 3.2 with Hadoop 20.205 and works fine > > (I > > >> > > >> remember > > >> > > >> > > > seeing > > >> > > >> > > > > > gmetad sometime goes down due to buffer overflow > > problem > > >> > when > > >> > > >> > hadoop > > >> > > >> > > > > starts > > >> > > >> > > > > > pumping in the metrics.. but restarting works.. let > me > > >> know > > >> > if > > >> > > >> you > > >> > > >> > > face > > >> > > >> > > > > > same problem? > > >> > > >> > > > > > > > >> > > >> > > > > > --Suhas > > >> > > >> > > > > > > > >> > > >> > > > > > Additionally, the Ganglia protocol change > significantly > > >> > > between > > >> > > >> > > Ganglia > > >> > > >> > > > > 3.0 > > >> > > >> > > > > > and Ganglia 3.1 (i.e., Ganglia 3.1 is not compatible > > with > > >> > > >> Ganglia > > >> > > >> > 3.0 > > >> > > >> > > > > > clients). This caused Hadoop to not work with Ganglia > > >> 3.1; > > >> > > there > > >> > > >> > is a > > >> > > >> > > > > patch > > >> > > >> > > > > > available for this, HADOOP-4675. As of November 2010, > > >> this > > >> > > patch > > >> > > >> > has > > >> > > >> > > > been > > >> > > >> > > > > > rolled into the mainline for 0.20.2 and later. To use > > the > > >> > > >> Ganglia > > >> > > >> > 3.1 > > >> > > >> > > > > > protocol in place of the 3.0, substitute > > >> > > >> > > > > > org.apache.hadoop.metrics.ganglia.GangliaContext31 > for > > >> > > >> > > > > > org.apache.hadoop.metrics.ganglia.GangliaContext in > the > > >> > > >> > > > > > hadoop-metrics.properties lines above. > > >> > > >> > > > > > > > >> > > >> > > > > > On Fri, Feb 3, 2012 at 1:07 PM, Merto Mertek < > > >> > > >> [email protected]> > > >> > > >> > > > > wrote: > > >> > > >> > > > > > > > >> > > >> > > > > > > I spent a lot of time to figure it out however i > did > > >> not > > >> > > find > > >> > > >> a > > >> > > >> > > > > solution. > > >> > > >> > > > > > > Problems from the logs pointed me for some bugs in > > >> > rrdupdate > > >> > > >> > tool, > > >> > > >> > > > > > however > > >> > > >> > > > > > > i tried to solve it with different versions of > > ganglia > > >> and > > >> > > >> > rrdtool > > >> > > >> > > > but > > >> > > >> > > > > > the > > >> > > >> > > > > > > error is the same. Segmentation fault appears after > > the > > >> > > >> following > > >> > > >> > > > > lines, > > >> > > >> > > > > > if > > >> > > >> > > > > > > I run gmetad in debug mode... > > >> > > >> > > > > > > > > >> > > >> > > > > > > "Created rrd > > >> > > >> > > > > > > > > >> > > >> > > > > > > > > >> > > >> > > > > > > > >> > > >> > > > > > > >> > > >> > > > > > >> > > >> > > > > >> > > >> > > > >> > > >> > > >> > > > > >> > > > >> > > > /var/lib/ganglia/rrds/hdcluster/xxx/metricssystem.MetricsSystem.publish_max_time.rrd" > > >> > > >> > > > > > > "Created rrd > > >> > > >> > > > > > > > > >> > > >> > > > > > > > > >> > > >> > > > > > > > >> > > >> > > > > > > >> > > >> > > > > > >> > > >> > > > > >> > > >> > > > >> > > >> > > >> > > > > >> > > > >> > > > /var/lib/ganglia/rrds/hdcluster/xxx/metricssystem.MetricsSystem.snapshot_max_time.rrd > > >> > > >> > > > > > > " > > >> > > >> > > > > > > > > >> > > >> > > > > > > which I suppose are generated from > > >> MetricsSystemImpl.java > > >> > > (Is > > >> > > >> > there > > >> > > >> > > > any > > >> > > >> > > > > > way > > >> > > >> > > > > > > just to disable this two metrics?) > > >> > > >> > > > > > > > > >> > > >> > > > > > > From the /var/log/messages there are a lot of > errors: > > >> > > >> > > > > > > > > >> > > >> > > > > > > "xxx gmetad[15217]: RRD_update > > >> > > >> > > > > > > > > >> > > >> > > > > > > > > >> > > >> > > > > > > > >> > > >> > > > > > > >> > > >> > > > > > >> > > >> > > > > >> > > >> > > > >> > > >> > > >> > > > > >> > > > >> > > > (/var/lib/ganglia/rrds/hdc/xxx/metricssystem.MetricsSystem.publish_imax_time.rrd): > > >> > > >> > > > > > > converting '4.9E-324' to float: Numerical result > out > > >> of > > >> > > >> range" > > >> > > >> > > > > > > "xxx gmetad[15217]: RRD_update > > >> > > >> > > > > > > > > >> > > >> > > > > > > > > >> > > >> > > > > > > > >> > > >> > > > > > > >> > > >> > > > > > >> > > >> > > > > >> > > >> > > > >> > > >> > > >> > > > > >> > > > >> > > > (/var/lib/ganglia/rrds/hdc/xxx/metricssystem.MetricsSystem.snapshot_imax_time.rrd): > > >> > > >> > > > > > > converting '4.9E-324' to float: Numerical result > out > > >> of > > >> > > >> range" > > >> > > >> > > > > > > > > >> > > >> > > > > > > so probably there are some converting issues ? > Where > > >> > should > > >> > > I > > >> > > >> > look > > >> > > >> > > > for > > >> > > >> > > > > > the > > >> > > >> > > > > > > solution? Would you rather suggest to use ganglia > > 3.0.x > > >> > with > > >> > > >> the > > >> > > >> > > old > > >> > > >> > > > > > > protocol and leave the version >3.1 for further > > >> releases? > > >> > > >> > > > > > > > > >> > > >> > > > > > > any help is realy appreciated... > > >> > > >> > > > > > > > > >> > > >> > > > > > > On 1 February 2012 04:04, Merto Mertek < > > >> > [email protected] > > >> > > > > > >> > > >> > > wrote: > > >> > > >> > > > > > > > > >> > > >> > > > > > > > I would be glad to hear that too.. I've setup the > > >> > > following: > > >> > > >> > > > > > > > > > >> > > >> > > > > > > > Hadoop 0.20.205 > > >> > > >> > > > > > > > Ganglia Front 3.1.7 > > >> > > >> > > > > > > > Ganglia Back *(gmetad)* 3.1.7 > > >> > > >> > > > > > > > RRDTool <http://www.rrdtool.org/> 1.4.5. -> i > had > > >> some > > >> > > >> > troubles > > >> > > >> > > > > > > > installing 1.4.4 > > >> > > >> > > > > > > > > > >> > > >> > > > > > > > Ganglia works just in case hadoop is not running, > > so > > >> > > metrics > > >> > > >> > are > > >> > > >> > > > not > > >> > > >> > > > > > > > publshed to gmetad node (conf with new > > >> > > >> > > > hadoop-metrics2.proprieties). > > >> > > >> > > > > > When > > >> > > >> > > > > > > > hadoop is started, a segmentation fault appears > in > > >> > gmetad > > >> > > >> > deamon: > > >> > > >> > > > > > > > > > >> > > >> > > > > > > > sudo gmetad -d 2 > > >> > > >> > > > > > > > ....... > > >> > > >> > > > > > > > Updating host xxx, metric > > >> dfs.FSNamesystem.BlocksTotal > > >> > > >> > > > > > > > Updating host xxx, metric bytes_in > > >> > > >> > > > > > > > Updating host xxx, metric bytes_out > > >> > > >> > > > > > > > Updating host xxx, metric > > >> > > >> > > > > metricssystem.MetricsSystem.publish_max_time > > >> > > >> > > > > > > > Created rrd > > >> > > >> > > > > > > > > > >> > > >> > > > > > > > > >> > > >> > > > > > > > >> > > >> > > > > > > >> > > >> > > > > > >> > > >> > > > > >> > > >> > > > >> > > >> > > >> > > > > >> > > > >> > > > /var/lib/ganglia/rrds/hdcluster/hadoopmaster/metricssystem.MetricsSystem.publish_max_time.rrd > > >> > > >> > > > > > > > Segmentation fault > > >> > > >> > > > > > > > > > >> > > >> > > > > > > > And some info from the apache log < > > >> > > >> > http://pastebin.com/nrqKRtKJ > > >> > > >> > > >.. > > >> > > >> > > > > > > > > > >> > > >> > > > > > > > Can someone suggest a ganglia version that is > > tested > > >> > with > > >> > > >> > hadoop > > >> > > >> > > > > > > 0.20.205? > > >> > > >> > > > > > > > I will try to sort it out however it seems a not > so > > >> > > tribial > > >> > > >> > > > problem.. > > >> > > >> > > > > > > > > > >> > > >> > > > > > > > Thank you > > >> > > >> > > > > > > > > > >> > > >> > > > > > > > > > >> > > >> > > > > > > > > > >> > > >> > > > > > > > > > >> > > >> > > > > > > > > > >> > > >> > > > > > > > On 2 December 2011 12:32, praveenesh kumar < > > >> > > >> > [email protected] > > >> > > >> > > > > > >> > > >> > > > > > wrote: > > >> > > >> > > > > > > > > > >> > > >> > > > > > > >> or Do I have to apply some hadoop patch for > this ? > > >> > > >> > > > > > > >> > > >> > > >> > > > > > > >> Thanks, > > >> > > >> > > > > > > >> Praveenesh > > >> > > >> > > > > > > >> > > >> > > >> > > > > > > > > > >> > > >> > > > > > > > > > >> > > >> > > > > > > > > >> > > >> > > > > > > > >> > > >> > > > > > > >> > > >> > > > > > >> > > >> > > > > >> > > >> > > > >> > > >> > > >> > > > > > >> > > > > > >> > > > > > >> > > > -- > > >> > > > > > >> > > > > > >> > > > http://www.hadoopsummit.org/ > > >> > > > > > >> > > > > > >> > > > > >> > > > >> > > > >> > > > >> > -- > > >> > > > >> > > > >> > http://www.hadoopsummit.org/ > > >> > > > >> > > > > > > > > > > > > -- > > > > > > > > > http://www.hadoopsummit.org/ > > > > > > > > > > > > -- > > > > > > http://www.hadoopsummit.org/ > > >
