On Sat, Nov 14, 2015 at 03:27:36AM +0000, Mychaela Falconia wrote: > > Nonetheless flashing at 406250 baud worked fine, > > One good thing about 406250 baud is that 24 MHz clock-based adapters > can produce it much more accurately than 812500. CP2102 produces > 406780 baud when programmed for 406250, so it's a much smaller error.
Good to know! > The best way to allow a given phone to be reflashed freely back and > forth between Mot/Compal's fw and ours is to give the firmwares totally > separate FFS, *not* the same FFS! This reasoning is exactly why I put > the aftermarket FFS configuration for FreeCalypso-on-C139 where I did: > Mot/Compal's fw won't touch the 0x3C0000-0x3EFFFF region we use, while > our fw won't touch the 0x370000-0x3BFFFF region the original fw uses > for its FFS. This way whichever fw happens to be flashed in the > 0-0x36FFFF region will use its respective FFS, while the other FFS > will sit there untouched, waiting for its respective fw to come back > and visit. :) I had not realized both FFS would coexist side-by-side, thanks for the information! I'm going to revert the change and proceed as your described. So far I didn't encountered any crashes when using the UI, however that's probably because the SIM I'm using does not have any contact or SMS stored, I'll probably just create a contact to enable a more realistic use case. --DS _______________________________________________ Community mailing list Community@freecalypso.org https://www.freecalypso.org/mailman/listinfo/community
