Hello FC community, If anyone here cares about FreeCalypso support for the Neo Freerunner (the value of such support is dubious given the discontinued status of the hardware and the sorry state of what was once upon a time the Openmoko community - but still...), I invite you to try this firmware build:
https://www.freecalypso.org/members/falcon/experimental-builds/gtamodem-magnetite-20161116.tar.bz2 It is built from the current FC Magnetite source in the stable l1reconst configuration - *not* the experimental hybrid one. Unless I broke something, it should work exactly the same as leo2moko-r1 from 2013, i.e., there should be no visible differences except for the identifying strings - see below. There are no end-user functional improvements of any kind, hence there is NO call for strict end users to "upgrade". However, if someone has a Freerunner that is running QtMoko, SHR, AoF or some other end user distro and some cycles to spare, I would appreciate some test reports. Once again, don't expect any improvements as there aren't any, but I would like to know if I broke something or not. One difference which does exist between all previous mokoN/leo2moko fw versions and this one is the format in which the identifying strings are emitted in response to AT+CGxx query commands. The GSM 07.07 spec defines these 4 commands for GSM modems to identify themselves: AT+CGMI -- get manufacturer name AT+CGMM -- get model name AT+CGMR -- get hw/fw revision AT+CGSN -- get serial number or IMEI According to the GSM 07.07 spec, the exchanges look like this: AT+CGMI (command) FIC/OpenMoko (intermediate response) OK (final response) The code we got from TI in the TCS3/LoCosto source implements this format, and so does the Huawei 3G USB modem I use for Internet on the go. But Openmoko's mokoN firmwares changed the AT+CGxx output format to this: AT+CGMI (command) +CGMI: FIC/OpenMoko (intermediate response) OK (final response) When I did leo2moko back in 2013, I replicated the output format produced by Om's fw versions, but the current FC Magnetite firmware follows the GSM 07.07 standard. I don't know if the modem-interfacing software in QtMoko/SHR/AoF/etc will be sensitive to this change or not, i.e., can they grok the official standard form in addition to Om's non-standard one or not - hence my request for testing. M~ _______________________________________________ Community mailing list [email protected] https://www.freecalypso.org/mailman/listinfo/community
