hello Background: I had a working C139 that was stolen, but after I took a flash dump. I got a replacement - good hardware, almost unused, but locked to a specific carrier.
Now I used these fc-loadtool commands to put the flash from the old stolen model onto the new phone:- flash erase-program-boot my_c139.bin 10000 flash erase 10000 360000 flash program-bin 10000 my_c139.bin 10000 360000 Great! I've got rid of the boot up carrier branding and the demand for an unlock code. But, to my surprise the IMEI has not changed - ie it's the same as before the flash operation, whereas I expected it would now have the IMEI of the stolen phone. So question - will I have the correct calibration figures for this hardware - ie will those figures, like the IMEI, also have remained unchanged? I saw that with a SIM card, the phone connects to the network after a short delay, much as I would expect. Guessing not, as we pull those figures out of the flash dump. Is the phone likely to behave badly with this "wrong" flash? I saw that the software versions (from #02#) are identical but I guess that is beside the point. -- David Matthews [email protected] _______________________________________________ Community mailing list [email protected] https://www.freecalypso.org/mailman/listinfo/community
