Hi all, I spent the afternoon reading through the new wiki and trying to install openembedded on my machine, mostly to try and compile a demo. I didn't realize I didn't need to build openmoko from scratch to compile the demos, so I dabbled in using MokoMakefile
I followed the instructions from: http://wiki.openmoko.org/wiki/MokoMakefile It failed at one point because it couldn't connect [EMAIL PROTECTED]:/home/moko$ make setup [ -e bitbake ] || \ ( svn co svn://svn.berlios.de/bitbake/branches/bitbake-1.6 bitbake ) [ -e OE.mtn ] || \ ( wget -c -O OE.mtn.bz2 http://www.openembedded.org/snapshots/OE-this-is-for-mtn-0.33.mtn.bz2 && \ bunzip2 OE.mtn.bz2 && \ mtn --db=OE.mtn pull monotone.openembedded.org org.openembedded.dev ) --20:59:49-- http://www.openembedded.org/snapshots/OE-this-is-for-mtn-0.33.mtn.bz2 => `OE.mtn.bz2' Resolving www.openembedded.org... 85.214.40.226 Connecting to www.openembedded.org|85.214.40.226|:80... connected. HTTP request sent, awaiting response... 404 Not Found 20:59:50 ERROR 404: Not Found. make: *** [setup-mtn] Error 1 [EMAIL PROTECTED]:/home/moko$ Does anyone else have this problem? I ping'd and curl'd www.openembedded.org and it seems to work. But the IP address doesn't. I thought I'd post it just in case it was something with the makefile. If it's a network problem on my end, then how would I work around it? Wil -- http://www.3cglabs.com http://thoughtl.us
_______________________________________________ OpenMoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
