Thank you so much for the update! I was frantically searching for HW since i heard it would be available in March and thought i was missing out. Glad to know i didn't miss the boat! This is also my first post to the list - i've been reading as many as i can since joining about a week ago. Also hoping to be of service to the community!
I skimmed a thread regarding GPS in the phone - I haven't looked up the datasheet for the chipset being used, but I know many GPS chips spout NMEA-183 messages. I have some old C routines i wrote about 10 yrs ago for parsing NMEA-183 protocol - if anybody thinks they'd be of use i can dust 'em off and submit them. Thanks again for setting up such a fantastic project! --clayton On 4/24/07, Sean Moss-Pultz <[EMAIL PROTECTED]> wrote:
Dear Community, We owe you all an update as to our status. Here it goes... Last week we finished 200 devices. Of these about 50 seem to have some problems but the rest are functionally complete, tested, and ready to go. We know the source of the problems for the 50 that failed and this is already corrected. This is great news because it means we can finally start to move out of engineering sample mode and into real production! These first 150 (or so) devices will go to phase 0 developers and our internal / external developers -- of which many still don't even have phones! Oh and Imre Kaloz gets a freed phone, too. Thanks for being the first to tell us about Atheros. We're almost for sure going to use their AR6K chipset in our next product. We must forewarn you all that we're having some supply issues with our 2.8" VGA LCM. Our vendor has had more than their fair share of troubles moving this LCM into mass production. We have some in stock now. But this might be the major bottleneck moving forward. There are only a few companies currently making LCMs of this size and resolution. Finally, we've already begun moving production into one of our factories in mainland China. There are two runs scheduled now: May 10th and May 20th. We're going to take those runs a bit slow just to make sure the quality is high. And then starting in June, things can run full speed. Thanks again for your continued support and patience. The light at the end of the tunnel is getting a little brighter :-) Sincerely, The Core Team _______________________________________________ OpenMoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
_______________________________________________ OpenMoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
