**********
* Moko *
**********
| <- USB Mini Jack
|
|\ <- Splice the Power from the hub to feed Neo
| \
| \________________________
| <- USB-B Jack \
********** |
* Hub * |
********** |
| | <- USB-A (Power from hub)|
| \_________________________/
|
| <- USB-A Line to standard USB device
I would think this would work to charge the Neo while in host mode. If
the hub doesn't support a non-powered host, you could always use yet
another port on the hub to power that connection (creating another
loop). It would eat up 2 ports on your hub to do this, but I would think
rigging custom cables is a bit easier than rigging custom hubs.
Just my thoughts.
~Bradley
Giles Jones wrote:
Lars Hallberg <[EMAIL PROTECTED]> wrote :
I'm still not clear over this...
1) Will it be possible to charge the neo over the usb connection while
the neo is in host mode. Will that raise special demand on the hub?
It will be if you use a special cable which allows power into the Neo but not
out of it.
2) With 4 AAA batteries in the hub You don't want to charge the neo at
all. If you have wall power You want to fast charge... Can that be
controlled from the neo, raise any extra demand on the hub?
You would only connect the data lines from the Phone to the hub.
You need a cable which allows power into the phone from a PSU, then supplies a
hub with the USB data lines.
---
G O Jones
_______________________________________________
OpenMoko community mailing list
[email protected]
http://lists.openmoko.org/mailman/listinfo/community
_______________________________________________
OpenMoko community mailing list
[email protected]
http://lists.openmoko.org/mailman/listinfo/community
