Shachar Shemesh wrote: > pHilipp Zabel wrote: >> work and JTAG, which >> you need if you have busted the bootloader (be it by hacking or it or >> entering "nand erase" on the console). >> > Does the JTAG also support single-stepping (ICE)?
jap. only makes sense in kernelspace / uboot due to the mmu, but thats where you need it. userspace is mostly better debugged with a gdb running on the device. the software used on the host side is openocd which gives you a console to the jtag (halting, stepping, etc) and a gdb stub to connect gdb on the host to. for more informations please take a look at this page http://openfacts.berlios.de/index-en.phtml?title=OpenOCD_configuration the debug board is pin-compatible with the amontec jtagkey tiny, just with different usb-ids the essential config is: ft2232_vid_pid 0x1457 0x5118 ft2232_layout "jtagkey" > Shachar kind regards -- Joachim Steiger _______________________________________________ OpenMoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community