Hi Andy, Thanks for your reply. Sorry, I should have said that I had chmod'd it to begin with.
ls reveals: [EMAIL PROTECTED]:~/DFU$ ls -l dfu-util -rwxr-xr-x 1 joseph joseph 706018 2007-12-05 12:04 dfu-util Thanks again, Joseph On 05/12/2007, Andrew Loughran <[EMAIL PROTECTED]> wrote: > Joseph Reeves wrote: > > Hello all, > > > > Probably a the most noob question you're going to get for a while, but > > I'm a bit stuck... I wanted to flash the latest Qtopia build but have > > come unstuck at the first hurdle. > > > > Running Kubuntu 7.10 and downloaded dfu-util from here: > > > > http://downloads.openmoko.org/snapshots/2007.11/images/ > > > > I have apt-get'd the dependencies and updated etc/fstab as per here: > > > > http://wiki.openmoko.org/wiki/Dfu-util > > > > But the this is as good as I can get out of it: > > > > [EMAIL PROTECTED]:~/DFU$ sudo ./dfu-util -a kernel -R -D > > ./uImage-2.6.22.5-moko > > 11+svnr3238-r7-neo1973.bin > > ./dfu-util: ./dfu-util: cannot execute binary file > > > > Any help getting this to work would be massively appreciated! > > > > Thanks, Joseph > > > > _______________________________________________ > > OpenMoko community mailing list > > [email protected] > > http://lists.openmoko.org/mailman/listinfo/community > > > Joseph. > > "sudo chmod a+x dfu-util" I guess would be a solution. > > check the perms with a ls -l dfu-util and make sure you can execute it. > > Regards, > > Andy > > _______________________________________________ > OpenMoko community mailing list > [email protected] > http://lists.openmoko.org/mailman/listinfo/community > _______________________________________________ OpenMoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
