I would also be very interested in re-work instructions for modifying a GTA01 to support 850MHz as many of us are capable doing circuit modifications.
Thanks, Cliff On Dec 10, 2007 9:32 AM, Mark <[EMAIL PROTECTED]> wrote: > In regards to the 850MHz Issue: > It seems that very little effort was required to switch a phone board > to 850 for testing. So my question is what exactly is involved. Was > it simply switching which pin is attached to the antenna? If it is a > relatively simple circuit change and involving only a top (or bottom) > layer trace, is it possible to tell us what connections to change to > convert an existing unit to 850MHz. Obviously only for the very > experienced people. If there is different capacitor, etc required to > match the frequency it might be less doable, but details would be > nice. once the design has been confirmed. On a side note this is > excellent news that the 850 variant may not be far behind GTA02. > > Mark > > Mark > > > _______________________________________________ > OpenMoko community mailing list > [email protected] > http://lists.openmoko.org/mailman/listinfo/community > -- ======================= Cliff Brake http://bec-systems.com _______________________________________________ OpenMoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
