2008/1/18, pHilipp Zabel <[EMAIL PROTECTED]>: > > Hi Sébastien, > > On Jan 18, 2008 11:58 AM, Sébastien Lorquet <[EMAIL PROTECTED]> wrote: > > Hi all, > > > > I managed to build OpenMoko with MokoMakefile for hx4700 (make setup, > change > > machine to hx4700 in local.conf, make openmoko-devel-image, all went > fine). > > Then I tried to run it. > > I lauched the kernel with haret, and booted from an ext2 256 MB SD card > (a > > rootdelay option is needed on the kernel command line) > > > > So, this gives me a wince-openmoko dual boot :) > > > > With the 624 MHz pxa270, the speed is fine, kinetic scolling works like > a > > charm, and the whole UI is very reactive :) > > Congratulations. > > > but... > > > > The problem is, hx4700 has no GSM modem, while openmoko keeps searching > for > > a network. > > I think it is the openmoko-dialer2 doing that.
I edited the file /etc/matchbox/session or something like that and removed the gsm applet. This is now ok :) > So I get a full list of status messages at the bottom of the window, that > > are very annoying. Do you have any idea to remove them? I tried to stop > > /etc/init.d/gsmd, but it's not running. I guess I have to stop a gsm > status > > applet, but I don't know how to do this. > > Here is an example: http://www.yaronet.com/mirari/BQ69 : "Not searching" > > blocks displayed at the bottom of the screen. > > > > Do you have any idea on how to map the hx4700 power button to the > openmoko > > shutdown/suspend command, so that I can save battery life? I'll ask > > questions on the handhelds-hx4700-port mailing list too, but I need to > know > > how buttons are managed in OM before I ask them how to achieve this ! > > Doesn't it work when you press the power button for a long time? > OpenEmbedded already had a patch to neod to do that: > > http://www.openembedded.org/repo/org.openembedded.dev/packages/openmoko2/neod_svn.bb > > http://www.openembedded.org/repo/org.openembedded.dev/packages/openmoko2/neod/ipaq.patch > and since revision 3348 it is contained in upstream neod. Oh yeah sorry, I did not push long enough :) The menu shows up, but nothing happens when I hit "shutdown". update: after a few seconds I get an openmoko splash screen with a scolling bar, that scolls, stop, and nothing more ! update2: after more time I get some kernel console messages saying "tmpfs is busy" update3: nothing happens after this. The kernel+his console are still alive, and no shutdown occurs. This item is for the hx4700 mailing list, I think. > Ah, last problem (and a minor one), at boot up I see on the fb console > that > > some jffs2 mount operation is not happy with my flash (of course, it's > full > > of wince and not jffs2 :) ) . I guess this is an init script trying to > mount > > some inexistent partition. Can I disable this? > > Here is the "screenshoot": http://www.yaronet.com/mirari/1RMS > > Cowardly refusing to erase blocks... fine, I didn't loose my wince image > :D > > Try removing the line containing jffs2 from /etc/fstab. Ah thanks, it was trying to mount mtdblock3 /home . No more jffs2 warnings. regards > Philipp > > _______________________________________________ > OpenMoko community mailing list > [email protected] > http://lists.openmoko.org/mailman/listinfo/community > I'll try usb networking this week end.
_______________________________________________ OpenMoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
