U-blox ANTARIS 4 chip 
 Connected to: S3C2442 UART2, /dev/ttySAC1 in userspace 
 Driver: none needed, talks standard NMEA 
 Datasheet: http://atmel.com/dyn/resources/prod_documents/doc4928.pdf



>>> Nils Faerber <[EMAIL PROTECTED]> 02/05/08 10:02 AM >>>
Christopher Earl schrieb:
> the specs have changed (very slightly)
> 
> * Atheros 802.11 b/g WiFi
> * Samsung S3C2442 B54 SoC @ 400Mhz
> * SMedia Glamo3362 Graphics Accelerator
> * 2x ST 3D Accelerometers
> * 256MB Flash
> * 128MB SDRAM
> * 2MB NOR Flash
> * 1200mAh Battery
> * 2 LEDs illuminating the two buttons. 
> * u-blox/Atmel ATR0635 GPS

ah, ublox GPS, very nice!
Which one is that, Antaris 4 or Antaris5?

> * Bluetooth
> * 850/1800/1900 Mhz or 900/1800/1900 Mhz for GSM/GPRS 
> * USB Host function with power
> 
> So anyone in NorthAmerica (mainly the states) needs to add that they want the 
> 850/1800/1900 GSM bands, I dont have a clue about how thats going to work
Cheers
  nils faerber

-- 
kernel concepts GbR        Tel: +49-271-771091-12
Sieghuetter Hauptweg 48    Fax: +49-271-771091-19
D-57072 Siegen             Mob: +49-176-21024535
--

_______________________________________________
OpenMoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


_______________________________________________
OpenMoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community

Reply via email to