On Fri, Jul 18, 2008 at 02:17:05PM +0300, Timo Jyrinki wrote: > I had heard > about some resistor in wrong place resulting in high-pass filter and > basically making music listening unbearable.
Do you still remember where you read it?
I have some problems with the output of the headphone jack too. But to
me it sounds mostly distorted.
> The initial sound quality indeed lacks all bass. However, there's a
> gigantic amount of alsamixer settings available - would these be
> documented anywhere, or has anyone been thoroughly going through
> those?
>
> I found that Bass Filter has a scale going from most normal ("200Hz @
> 8kHz") to most thinny voice ("130Hz @ 48kHz"), but how those settings
> should be interpreted? The whole range is, in order:
> 200Hz @ 8kHz
> 100Hz @ 8kHz
> 400Hz @ 48kHz
> 100Hz @ 16kHz
> 200Hz @ 48kHz
> 130Hz @ 48kHz
>
> Sounds weird to me.
>
> Additionally there is a Bass settings, initially 0. And Bass Boost,
> with either "Linear Control" or "Adaptive Boost". With Bass set to 100
> and Bass Boost set to Adapative Boost, together with "200Hz @ 8kHz"
> setting, the sound is starting to resemble something of a normal,
> though quite far from ideal. Linear Control is probably better,
> Adaptive Boost seems to clip sometimes with heavy bass.
It seemed to me the bass problem could be solved by mixer setting. But I
could not remove the distortion in the mid to higher frequencies.
pgpxbWlEmQ3ot.pgp
Description: PGP signature
_______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
