On Monday 21 July 2008, Mikko Rauhala wrote: > ma, 2008-07-21 kello 10:24 +0100, Andy Green kirjoitti: > > We don't monitor ID pin yet to automate this, but we will. > > Funky. > > > You need to provide some magic sysfs poking by hand at the moment to > > push it between host and device modes. > > ~ echo host > /sys/devices/platform/s3c2410-ohci/usb_mode > > ~ echo 1 > /sys/devices/platform/neo1973-pm-host.0/hostmode > > There was some discussion at some point if the Freerunner can be in host > mode without providing power _while_ charging from outside 5V (for some > special applications like robotics, obviously with special non-standard > cabling arrangements), but I don't know if that ended up with an answer. > Will only changing the usb_mode accomplish this?
http://wiki.openmoko.org/wiki/Neo_FreeRunner_GTA02_Hardware See the USB Host section - 47k from ID to ground, 15k from D+ to ground, 15k from D- to ground, and only do the first echo. _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community