Picked up a pile of SIM cards from a local junk dealer. Turns out all the older cards work just fine. My carrier is AT&T so I can not activate an old SIM. The newer AT&T cards are model 71234G and 71234D do not work at all. But people are reporting the 71234O working. So I find one. It works... Mostly. After a while the phone goes back to a "registering" state. At this point it will not reconnect. But If I pull the SIM and put it back into my old Nokia, let it boot, then shutdown and move the SIM back to the FR, it works fine... For a few hours. That sounds like a connection issue. So the same test with out the Nokia. Just reset the card. No good. My normal test it to run at +cimi. No good. Fine I will by an old ATT wireless SIM card. AT&T will not activate the old SIM because AT&T is not ATT Wireless. This is just a pain. Wondering what the status on the new GSM firmware?
Could I get around this with a SIM card burner? Is there such a thing? Copy the 71234O SIM onto one of my old SIMs? -Adam _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
