W.Kenworthy wrote: > While in a meeting, I let the battery run down to 0% (as read by apm) > > Now when I plug it into usb, I get > > cat /sys/class/i2c-adapter/i2c-0/0-0073/chgmode gives play-only > > and > > cat /sys/class/i2c-adapter/i2c-0/0-0073/charger_type gives host/500mA > usb mode 100mA > > Is it charging (at 100ma) and I just need to let it do its thing ? > > Will the wall charger work better - its at home(!) > > Or do I need to jump start the battery? :( > > Shouldnt the phone have shut itself down at 0% as protection? > > 2007.2 with todays updated kernel > BillK > > > _______________________________________________ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > I believe the neo sometimes can use more than 100mA to operate, so just plugging it in without enabling fast charge could STILL discharge the battery. You need to enable 500mA or 1A quick charge, as noted by the poster above me.
_______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community