Hello, After much efforts (but thanks for the page ;-) ), I have managed to install this on my microSD card: http://wiki.openmoko.org/wiki/Debian
I can reach the gdm screen but the calibration of the touchscreen is totally flaky. After another set of painful efforts, I have managed to install libts-bin and run ts_calibrate. If you want to know, you need to do this from the terminal over the USB-connection: export TSLIB_CALIBFILE="/etc/pointercal" export TSLIB_CONFFILE="/etc/ts.conf" export TSLIB_PLUGINDIR="/usr/lib/ts" export TSLIB_FBDEVICE=/dev/fb0 export TSLIB_CONSOLEDEVICE=none export TSLIB_TSDEVICE=/dev/input/event1 ts_calibrate I get some numbers on /etc/pointercal but there are quite different if I run ts_calibrate a few times. In any case, the touchscreen is still totally mad and I can't use xvkbd to input the login info. In the best case scenario, the pointer is around 200x200 pixels NW from the touch. Then, I have played with xorg.conf. I have tried the rotate option and many other things, but unsuccessfully. Any idea? Thanks in advance, Gregoire PS: In case, you ask: more /etc/ts.conf # Uncomment if you wish to use the linux input layer event interface module_raw input # Uncomment if you're using a Sharp Zaurus SL-5500/SL-5000d # module_raw collie # Uncomment if you're using a Sharp Zaurus SL-C700/C750/C760/C860 # module_raw corgi # Uncomment if you're using a device with a UCB1200/1300/1400 TS interface # module_raw ucb1x00 # Uncomment if you're using an HP iPaq h3600 or similar # module_raw h3600 # Uncomment if you're using a Hitachi Webpad # module_raw mk712 # Uncomment if you're using an IBM Arctic II # module_raw arctic2 module pthres pmin=1 module variance delta=30 module dejitter delta=100 module linear _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community