[EMAIL PROTECTED]:~# cat /mnt/debian/etc/pointercal 557 38667 -4654632 -51172 121 46965312 65536
[EMAIL PROTECTED]:~# cat /mnt/debian/etc/ts.conf # Uncomment if you wish to use the linux input layer event interface module_raw input # Uncomment if you're using a Sharp Zaurus SL-5500/SL-5000d # module_raw collie # Uncomment if you're using a Sharp Zaurus SL-C700/C750/C760/C860 # module_raw corgi # Uncomment if you're using a device with a UCB1200/1300/1400 TS interface # module_raw ucb1x00 # Uncomment if you're using an HP iPaq h3600 or similar # module_raw h3600 # Uncomment if you're using a Hitachi Webpad # module_raw mk712 # Uncomment if you're using an IBM Arctic II # module_raw arctic2 module pthres pmin=1 module variance delta=30 module dejitter delta=100 module linear [EMAIL PROTECTED]:~# diff /etc/pointercal /mnt/debian/etc/pointercal [EMAIL PROTECTED]:~# diff /etc/ts.conf /mnt/debian/etc/ts.conf --- /etc/ts.conf Wed Dec 31 19:00:00 1969 +++ /mnt/debian/etc/ts.conf Sun Feb 3 15:05:58 2008 @@ -1,5 +1,5 @@ # Uncomment if you wish to use the linux input layer event interface -module_raw input grab_events=1 +module_raw input # Uncomment if you're using a Sharp Zaurus SL-5500/SL-5000d # module_raw collie On Thursday 07 August 2008 13:21:30 Gregoire Gentil wrote: > Daniel, > > Thanks for the answer. It's not working for me. I don't have any more > the delta but there is a scale problem (top left corner matches but > bottom right corner doesn't at all). > > Can you please copy paste your /etc/ts.conf and /etc/pointercal here? > > Thanks, > > Grégoire > > > On Thu, 2008-08-07 at 13:01 -0400, Daniel Benoy wrote: > > I copied my /etc/pointercal from internal flash (Which can be mounted from > > within debian as /dev/mtdblock6, I believe) > > > > That worked for me. :) Hope that helps. > > > > I wished that the openmoko team used Debian instead of openembedded.. I > > wish I could just apt-get stuff instead of having to struggle with opkg .. > > and busybox annoys me sometimes. > > > > On Thursday 07 August 2008 12:20:11 Gregoire Gentil wrote: > > > Hello, > > > > > > After much efforts (but thanks for the page ;-) ), I have managed to > > > install this on my microSD card: > > > http://wiki.openmoko.org/wiki/Debian > > > > > > I can reach the gdm screen but the calibration of the touchscreen is > > > totally flaky. > > > > > > After another set of painful efforts, I have managed to install > > > libts-bin and run ts_calibrate. If you want to know, you need to do this > > > from the terminal over the USB-connection: > > > > > > export TSLIB_CALIBFILE="/etc/pointercal" > > > export TSLIB_CONFFILE="/etc/ts.conf" > > > export TSLIB_PLUGINDIR="/usr/lib/ts" > > > export TSLIB_FBDEVICE=/dev/fb0 > > > export TSLIB_CONSOLEDEVICE=none > > > export TSLIB_TSDEVICE=/dev/input/event1 > > > ts_calibrate > > > > > > I get some numbers on /etc/pointercal but there are quite different if I > > > run ts_calibrate a few times. In any case, the touchscreen is still > > > totally mad and I can't use xvkbd to input the login info. In the best > > > case scenario, the pointer is around 200x200 pixels NW from the touch. > > > > > > Then, I have played with xorg.conf. I have tried the rotate option and > > > many other things, but unsuccessfully. > > > > > > Any idea? Thanks in advance, > > > > > > Gregoire > > > > > > PS: In case, you ask: > > > > > > more /etc/ts.conf > > > # Uncomment if you wish to use the linux input layer event interface > > > module_raw input > > > > > > # Uncomment if you're using a Sharp Zaurus SL-5500/SL-5000d > > > # module_raw collie > > > > > > # Uncomment if you're using a Sharp Zaurus SL-C700/C750/C760/C860 > > > # module_raw corgi > > > > > > # Uncomment if you're using a device with a UCB1200/1300/1400 TS > > > interface > > > # module_raw ucb1x00 > > > > > > # Uncomment if you're using an HP iPaq h3600 or similar > > > # module_raw h3600 > > > > > > # Uncomment if you're using a Hitachi Webpad > > > # module_raw mk712 > > > > > > # Uncomment if you're using an IBM Arctic II > > > # module_raw arctic2 > > > > > > module pthres pmin=1 > > > module variance delta=30 > > > module dejitter delta=100 > > > module linear > > > > > > > > > > > > > > > _______________________________________________ > > > Openmoko community mailing list > > > [email protected] > > > http://lists.openmoko.org/mailman/listinfo/community > > > > > > > p > > > > -- Daniel Benoy http://daniel.benoy.name -- Daniel Benoy http://daniel.benoy.name
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
