On Tue, Aug 12, 2008 at 02:44:56PM +0100, Stroller wrote: > I _think_ they mentioned that the sides are particularly fiddly and > to do them first. Or was it last? I'm knackered if I can find their > post now, but if anyone has any suggestions before I proceed to foul > it all up I'd be grateful. > > Stroller. >
I would definitely not do the sides first. I did the front first, but in retrospect it might have been better to do the back first. I would most certainly do the sides last (they were the easy part.) You may be recalling that the thread (i'm just speculating here) said that the tabs on the side were hard (the folds from the top and bottom piece, not the long strips that go along the side). These will not want to bend and you will have to constantly push them down for 30 minutes or so. Just be patient. If I were to reapply mine, I'd wait a day to do the sides, and make sure the front and back pieces were situated adequately. Last bit of advice, pay some extra attention to aligning the front and back. The front is a bit harder to screw up because there are holes to help you align it, but the back is a bit more error prone. My back is slightly higher than it should be and there is some slight overlap of it and the strip along the top of the phone. That all said, I'm very pleased with the invisible shield, and two of my colleagues have been impressed enough to order them for their phones. -- Stephen Shelton [EMAIL PROTECTED] http://www.stephenashelton.com _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community