On Friday 15 August 2008 22:31:11 arne anka wrote: > the tools are to be used on your host computer, i think.
Thanx that was it. But at the end I wasn't successful anyway. Now when I reboot I see first the Openmoko splash then a white screen then a short vibration and the Openmoko splash again ... If I chose boot from Flash 2008.08 starts correct. I got the following messages when using the script for adjusting the uBoot environment : Opening USB Device 0x0000:0x0000... Found Runtime: [0x1d50:0x5119] devnum=43, cfg=0, intf=0, alt=2, name="u-boot_env" Claiming USB DFU Interface... Setting Alternate Setting ... Determining device status: state = dfuERROR, status = 14 dfuERROR, clearing status Determining device status: state = dfuIDLE, status = 0 dfuIDLE, continuing Transfer Size = 0x1000 bytes_per_hash=5242 Starting download: [##################################################] finished! state(2) = dfuIDLE, status(0) = No error condition is present Done! Done modifying uboot environment Any idea? Greets Michael _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community