On Monday 15 September 2008, Dale Maggee wrote: > Hi, > > as per the 'DFUScript' thread, I've made a change to my flashing / > backup utility to enable support for more than one attached DFU-capable > device, but I'm interested to know what happens if you have more than > one of the same device attached and booted into NAND/NOR. > > So, if you have more than one freerunner or more than one Neo1973, could > I please ask you to boot them both/all into NAND/NOR, run "dfu-util -l", > and post the output here for me, along with what you had attached (i.e > two freerunners, two 1973's, etc)? this would be a great help.
Two freerunners in NOR connected directly to the host: # dfu-util -l dfu-util - (C) 2007 by OpenMoko Inc. This program is Free Software and has ABSOLUTELY NO WARRANTY Found Runtime: [0x1d50:0x5119] devnum=4, cfg=0, intf=2, alt=0, name="USB Device Firmware Upgrade" Found Runtime: [0x1d50:0x5119] devnum=3, cfg=0, intf=2, alt=0, name="USB Device Firmware Upgrade" _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
