Christian Weßel wrote: > > Thanx for the detail explaination, but I am still a little confused. > > After installation of Debian I followed the tangogps guide from OM wiki. > I installed fso-gps and tangogps, both with <apt-get install fso-gps > tangogps> and it doesn't work together. Neither 'location' nor 'tango'. > After a selfmade confusion with my servers iptables I installed also > netutils-ping and dnsutils. Thats all.
So that means you have the tangogps that uses gpsd not the version that has been modified for gypsy, thus you need fso-gpsd, which you have. So far so good. > So, please give me a hint what to de-install and which combination to > install and how to configured it. Maybe also the startup with zhone gui, > currently I need to start tangogps by xterm. As I said in my previous email, I think your software is configured and working properly; you just don't have a fix and no combination of software will help that. To help clarify, follow along with this: Here [1] is a screen shot of the tangogps trip page when there is no gpsd for tango to talk to. As you can see, everything is blank. Here [2] is a screen shot when there is a gpsd to talk to, but the gps is powered off so gpsd can't talk to it. Now everything is zero instead of blank, with the exception of GPS Time which is epoch incorrrectly converted from my local time to GPS Time. Here [3] is a screen shot when the gps is powered on but there is no fix. Now that satellite count has changed to 14/0, which means the gps can see 14 satellites in the sky but has not locked on to any of them. The GPS Time is now correct as well which means that gps has received time from at least one of the satellites. And finally, for completeness sake, here [4] is a screen shot of everything working. The satellite count is now 14/7; 14 in view, 7 used in calculating position. [1] http://www.millions.ca/~stacy/neoFreeRunner/no-gpsd.png [2] http://www.millions.ca/~stacy/neoFreeRunner/no-gps.png [3] http://www.millions.ca/~stacy/neoFreeRunner/no-fix.png [4] http://www.millions.ca/~stacy/neoFreeRunner/fix.png Based on your description of what showed on your screen, you are in situation 3, your gps can see satelites, ogpsd is talking to your gps, fso-gpsd is talking to ogpsd and tangogps is talking to fso-gpsd. All you need now is a fix. I would suggest you go outside, sit in an open space with a good view of the sky, have a beer (or two :-) and see what happens. If you still can't get a fix, then I would suggest there is a hardware problem. There are two possibilities that I know of. The most likely is the SD Card [5] I don't know if debian includes the driver fix for this or not. The other one is an issues with the connector for the internal antenna [6]. Using an external antenna will bypass both of those issues. [5] http://wiki.openmoko.org/wiki/GPS_Problems [6] http://wiki.openmoko.org/wiki/FreeRunner_GPS_antenna_repair_SOP > BTW, I checked my process list and couldn't find any other gpsd except > fso-gpsd: ogpsd will not show up as a process under that name, it will show up as python. I would recommend you install lsof and then if you type lsof /dev/ttySAC1 you will see what process has the gps device open. -stacy _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
