Under the latest Rasterman image with FSO repos (frameworkd, zhone, supporting installed) when I switch to USB Host mode (via sysfs, not dbus), it will automount my USB thumbdrive, but doesn't do anything with the keyboard that previously worked, and 'lsusb' is always empty. Module hci_usb is inserted.
Output of dmesg for the entire cycle: s3c2410: changing usb to host usb 1-2: new low speed USB device using s3c2410-ohci and address 12 usb 1-2: configuration #1 chosen from 1 choice input: CHESEN USB Keyboard as /devices/platform/s3c2410-ohci/usb1/1-2/1-2:1.0/input/input19 input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-s3c24xx-2 input: CHESEN USB Keyboard as /devices/platform/s3c2410-ohci/usb1/1-2/1-2:1.1/input/input20 input: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-s3c24xx-2 usb 1-2: USB disconnect, address 12 s3c2410: changing usb to device usb0: full speed config #1: 500 mA, Ethernet Gadget, using CDC Ethernet So it sees the keyboard and knows what it is, but no keys work. Is the problem with X? j _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
